Problem with creation of dbadapter in jdeveloper using only jndi

Hi,
I´m new in this forum and first would like thank for the opportunity.
My problem is that have an application where i need to create a dbadapter for to connect a database.
I´m using bpel.
Would like known if there is a way of to make this without creating a local dbconnection in my project. I´m want to use only jndi that is in my Aplication Server.
For example : At the moment of creation of dbadapter, the wizard give me a dbconnection and below the jndi, is not possible i to create this connector using only the JNDI?
Thanks.

Hi,
Try using Open Data Set file for output to load in to application server.
The GUI_DOWNLOAD only gets the data to the presentation server,.
I think you are expecting the file in AS running GUI_Download gets only to Presentation Server.
Thanks & Regards,
Vishnu

Similar Messages

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

Problem with creation of jar with external libraries

hi guys, I've no problem with creation of jar,i use this command:
jar -mcf MANIFEST.MF NameFile.jar *.class
my file manifest is this:
Manifest-Version: 1.0
Created-By: Me
Main-Class: NameFile
Now,I've to make a jar file,but i have to use some external libraries in jar format.
I've read on sun tutorial and i've added to manifest this line:
Class-Path: dt.jar formshelp.jar formsrt.jar jh.jar looks-1.3.1.jar substance.jar TableLayout.jar
But the jar file doesn't work, neither with a double click nor with console...
Someone can help me?Thanks!:)

Darkweb wrote:
sorry but,the external libraries that i use are in .jar,what i've to do to include these libraries in my jar?One of 3 things
1) Take them out of the jar, and put them in a folder, preferably a folder in the same folder as the jar
2) Write a custom classloader to load classes from nested jars
3) Extract the contents of all the dependency jars, and jar them all up with your own code
The first is almost always the most preferable, the second one is doable but brittle and resistent to updating dependencies ( you have to release everything for any changes you need, even if it's not a change in your own code ) and the third one is tedious and suffers from the same robustness problems of the second, not to mention that a lot of software licences prohibit you from actually doing it. Do the first one, it's by far the most common and easiest to maintain. I really wouldn't advise the third option, ever, though. Any activity that reduces the modularity of your application is ill-advised

There is any Performance problem with Creation of many Y or Z Programs.

HI,
There is any Performance problem with Creation of many Y or Z Programs. plz give clarity regarding this to me......
regards
ganesh

Ganesh,
Can you please mention the context and the purpose of creating these custom program. And application are you referring to?
Regards,
Rohit

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

Most people have no problems with installing firefox as an upgrade, but there are quite a few things that can cause problems. Please have a look at the articles
* [[software Update Failed]] <-- clickable link (blue ) --
* [[firefox will not start]]
* [[firefox does not work]]
Post back after you read them and say what you tried. Have you ensured you used an admin account, possibly needing to check the UAC setting, and that security software is not blocking the changes. You should certainly try starting in firefox's [[safe mode]] either from a menu/icon option or by holding the shift key as you attempt to run firefox.
Is the browser icon you see on the desktop, and a firefox icon ?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

HT4993 i been having sim card problems with my iphone 5. am i the only one?

i been having sim card problems with my iphone 5. am i the only one?

Hello,
I'm also had problems with Iphone 5 , it read no sim card, i solved problem by removing sim card and cleaning with alcohol and q-tip and installing back.
Shut down phone.
On the side of phone , you will see a small pin hole, insert paper clip and sim card will come out, be careful to do it over a clean towel as not to let drop on floor, make sure your hands clean while doing this.
Insert sims card back and turn on, it should work again.
Good Luck.

Having a problem with commandButton attribute when i am using it under tabl

Having a problem with {color:#800000}commandButton {color}{color:#339966}attribute {color}when i am using it under{color:#ff0000} table{color}
I am using a command button under a table.
here is the example
<h:dataTable value="#{wlmHandler.plexes.plexes}" var="{color:#ff0000}onePlex{color}" border="0" cellspacing="0" cellpadding="0" width="100%" border="0">
<h:column>
<h:panelGrid border="0" cellpadding="0" cellspacing="0" columns="5">
<h:commandButton action="" styleClass="tixbutton" value="#{labels.ADD}" onclick="#{onePlex.tran}"/>
<f:verbatim> </f:verbatim>
<h:commandButton action="#{createTransaction.transactionCommand}" styleClass="tixbutton"
value="#{labels.SUBMIT}" actionListener="#{createTransaction.processAction}">
<f:attribute name="dbName" value="#{wlmHandler.dbName}"/>
<f:attribute name="plexName" value="{color:#ff9900}#{onePlex.name}"{color}/>
</h:commandButton>
</h:panelGrid>
<h:/column>
</h:dataTable >
when i am using this plex name atribute it is giving nullPointerException
{color:#ff9900}this value #{onePlex.name} i cant able to access inside the command button{color}

balu i have tried by seeing u r blog.
this is my structure of tables
plexes (if i iterate plexes table gives plex object)
|
------ plex (plex table gives transaction object)
|
------transactions(transactions table gives transaction table)
|
here i will have a command link to this link i have to pass the plex name which
will come from
i tried in this command action with HTMLDataTable getRowData()
i am not getting the selected row data .i am downcasting this getRowData() to plex.

I had to uninstall firefox since it was causing so many problems with my computer. I was using the latest version 18. What is the problem?

I have had nothing but problems since I installed the latest version of Firefox version 18. It hangs up my computer no matter what I am doing. Even if I am not using the browser. I uninstalled it three times and the problems just seemed to be getting worse. I finally uninstalled it and did not reinstall it again. I am not going to use it again until the problems are fixed. I also don't know what funmoods is or whatever it is that replaced my google home page. I don't like software deciding what services I should use. I have been a firefox user for over 15 years. I have never had problems like this before. I have switched to Safari. It works without interfering with the other tasks I am doing on my computer. I don't know what version 18 did but the previous version of firefox I was using was perfectly fine. I had no problems whatsoever with it. It appears as if this version was not sufficiently tested. Also my daughter is having the same problems with her computer and they all started with the new version. So it isn't just me. At least give us the option of going back to the previous version and asking us if we want to upgrade when a new one comes out. However, I have never had these problems in the past with any version of firefox I installed. I like the features of firefox but cannot afford to keep rebooting my computer. It seems that firefox gets hung up and then hangs the computer up and I can't do anything else even if I am not using it. It seems to stay on in the background and hang everything up. Please fix this.

It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

Problem with NIReport.llb\Print HTML Report using IE.vi on different machines

We have 5 machines here in our workgroup which have the same state regarding security patches and other system updates. We recently found out that there is a problem with the NIReport.llb\Print HTML Report using IE.vi on the different machines.
If I would open the VI on MachineA the control could be loaded. If I would open the VI on MachineB the control could be loaded. If I would copy the VI from MachineB to MachineA and open the VI the control could not be loaded. If I would copy the VI from MachineA to MachineB and open the VI on MachineB the control could be loaded. MachineB could load the version from MachineA and MachineB but on MachineA only the own version will load. I have seen that both versions have the same GUID for the Microsoft Webbrowser but are different in some other aereas.
Since printing HTML Reports is part of the application which will be distributed as application I want to know if someone else have seen such a behaviour or has got problems distributing an application.
Also I want to know which additional information is stored in an Active-X container about the control beside the GUID.
We have Win XP Prof SP2 with MS IE 6.0.2900.2180 on all machines in the workgroup.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi Tom,
this is the VI <vi.lib>\Utillitiy\NIReport.llb\Print HTML Report using IE.vi copied from a machine that can load and run the VI and it will print. On this machine the control in the VI is white.
This VI will give the "Control could not be loaded" message on my machine.
The file shdocvw.dll is 2006-10-23 16:18 size 1.460 KB and I verifyed that both machines have the same version of this file.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Attachments:
Print HTML Report using IE.png ‏11 KB

Problem with writing continuous data to excel using using Report Generation vi's

Hey Everyone,
I am trying to read the data from DAQ and write to excel continuously using Report Generation vi's.
But when I run the VI, it writes only one interation of the while loop (gathering data from DAQ continuously) and doesn't append the data into the same file when I run it again after stoping the VI.
I have attached the VI i created. Please let me know if you have any idea to solve this issue.
Thanks
Attachments:
sample 5.vi ‏35 KB

There are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor

Problem with creation of dbadapter in jdeveloper using only jndi

Similar Messages

Maybe you are looking for