Problem with creation of routing
Dear All,
I use below BAPI for creation of routing. BAPI is succeddful but when i go to CS03 and display, work center, plant, control key information is not filled. But header details are filled. Do you have any idea why it happens ? Am i not filling some parameters ?
Please let me know.
CLEAR : LR_BAPIRET2,
LT_BAPIRET2.
CLEAR LT_TASK.
LR_TASK-VALID_FROM = SY-DATUM.
LR_TASK-VALID_TO_DATE = '99991231'.
LR_TASK-TASK_LIST_USAGE = '1'.
LR_TASK-PLANT = '1830'.
LR_TASK-TASK_LIST_STATUS = '4'.
LR_TASK-TASK_MEASURE_UNIT = 'PC'.
LR_TASK-DESCRIPTION = 'TEST1'.
LR_TASK-LOT_SIZE_FROM = '0.000'.
LR_TASK-LOT_SIZE_TO = '0.000'.
APPEND LR_TASK TO LT_TASK.
CLEAR : LR_MATERIALTASKALLOCATION,
LT_MATERIALTASKALLOCATION.
LR_MATERIALTASKALLOCATION-MATERIAL = 'TEST-0008'.
LR_MATERIALTASKALLOCATION-PLANT = '1830'.
LR_MATERIALTASKALLOCATION-VALID_FROM = SY-DATUM.
APPEND LR_MATERIALTASKALLOCATION TO LT_MATERIALTASKALLOCATION.
CLEAR : LR_OPERATION,
LT_OPERATION.
LR_OPERATION-WORK_CNTR = 'HCPA001'.
LR_OPERATION-PLANT = '1830'.
LR_OPERATION-CONTROL_KEY = 'PP01'.
LR_OPERATION-BASE_QUANTITY = '1.000'.
LR_OPERATION-VALID_FROM = SY-DATUM.
LR_OPERATION-SEQUENCE_NO = '0'.
LR_OPERATION-OBJ_ID = '00000000'.
*LR_OPERATION-ACTIVITY = '0010'.
LR_OPERATION-DESCRIPTION = 'TEST'.
APPEND LR_OPERATION TO LT_OPERATION.
CALL FUNCTION 'BAPI_ROUTING_CREATE'
EXPORTING
TESTRUN = ' '
PROFILE =
BOMUSAGE = 'X'
APPLICATION =
IMPORTING
GROUP =
GROUPCOUNTER =
TABLES
TASK = LT_TASK
MATERIALTASKALLOCATION = LT_MATERIALTASKALLOCATION
SEQUENCE = LT_SEQUENCE
OPERATION = LT_OPERATION
SUBOPERATION =
REFERENCEOPERATION =
WORKCENTERREFERENCE =
COMPONENTALLOCATION =
PRODUCTIONRESOURCE =
INSPCHARACTERISTIC =
TEXTALLOCATION =
TEXT =
RETURN = LT_BAPIRET2
LOOP AT LT_BAPIRET2 INTO LR_BAPIRET2 WHERE TYPE = 'E' OR
TYPE = 'A'.
LF_ROUTING_ERROR = 'X'.
ENDLOOP.
IF LF_ROUTING_ERROR NE 'X'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
RETURN =
ENDIF.
Sorry.
CLEAR : LR_BAPIRET2,
LT_BAPIRET2.
CLEAR LT_TASK.
LR_TASK-VALID_FROM = SY-DATUM.
LR_TASK-VALID_TO_DATE = '99991231'.
LR_TASK-TASK_LIST_USAGE = '1'.
LR_TASK-PLANT = '1830'.
LR_TASK-TASK_LIST_STATUS = '4'.
LR_TASK-TASK_MEASURE_UNIT = 'PC'.
LR_TASK-DESCRIPTION = 'TEST1'.
LR_TASK-LOT_SIZE_FROM = '0.000'.
LR_TASK-LOT_SIZE_TO = '0.000'.
APPEND LR_TASK TO LT_TASK.
CLEAR : LR_MATERIALTASKALLOCATION,
LT_MATERIALTASKALLOCATION.
LR_MATERIALTASKALLOCATION-MATERIAL = 'TEST-0008'.
LR_MATERIALTASKALLOCATION-PLANT = '1830'.
LR_MATERIALTASKALLOCATION-VALID_FROM = SY-DATUM.
APPEND LR_MATERIALTASKALLOCATION TO LT_MATERIALTASKALLOCATION.
*CLEAR : LR_SEQUENCE,
* LT_SEQUENCE.
*LR_SEQUENCE-SEQUENCE_NO = '0'.
*LR_SEQUENCE-SEQUENCE_CATEGORY = '0'.
*LR_SEQUENCE-ALIGNMENT_KEY_FOR_SCHEDULING = '2'.
*APPEND LR_SEQUENCE TO LT_SEQUENCE.
CLEAR : LR_OPERATION,
LT_OPERATION.
LR_OPERATION-WORK_CNTR = 'HCPA001'.
LR_OPERATION-PLANT = '1830'.
LR_OPERATION-CONTROL_KEY = 'PP01'.
LR_OPERATION-BASE_QUANTITY = '1.000'.
LR_OPERATION-VALID_FROM = SY-DATUM.
LR_OPERATION-SEQUENCE_NO = '0'.
LR_OPERATION-OBJ_ID = '00000000'.
*LR_OPERATION-ACTIVITY = '0010'.
LR_OPERATION-DESCRIPTION = 'TEST'.
APPEND LR_OPERATION TO LT_OPERATION.
CALL FUNCTION 'BAPI_ROUTING_CREATE'
* EXPORTING
* TESTRUN = ' '
* PROFILE =
* BOMUSAGE = 'X'
* APPLICATION =
* IMPORTING
* GROUP =
* GROUPCOUNTER =
TABLES
TASK = LT_TASK
MATERIALTASKALLOCATION = LT_MATERIALTASKALLOCATION
SEQUENCE = LT_SEQUENCE
OPERATION = LT_OPERATION
* SUBOPERATION =
* REFERENCEOPERATION =
* WORKCENTERREFERENCE =
* COMPONENTALLOCATION =
* PRODUCTIONRESOURCE =
* INSPCHARACTERISTIC =
* TEXTALLOCATION =
* TEXT =
RETURN = LT_BAPIRET2
LOOP AT LT_BAPIRET2 INTO LR_BAPIRET2 WHERE TYPE = 'E' OR
TYPE = 'A'.
LF_ROUTING_ERROR = 'X'.
ENDLOOP.
IF LF_ROUTING_ERROR NE 'X'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
* IMPORTING
* RETURN =
ENDIF.
Similar Messages
-
Problems with creation of catalogue XPGrpwise and temporary
Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Problem with Creation of TemSe file...
HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai. -
There is any Performance problem with Creation of many Y or Z Programs.
HI,
There is any Performance problem with Creation of many Y or Z Programs. plz give clarity regarding this to me......
regards
ganeshGanesh,
Can you please mention the context and the purpose of creating these custom program. And application are you referring to?
Regards,
Rohit -
Problem with creation of jar with external libraries
hi guys, I've no problem with creation of jar,i use this command:
jar -mcf MANIFEST.MF NameFile.jar *.class
my file manifest is this:
Manifest-Version: 1.0
Created-By: Me
Main-Class: NameFile
Now,I've to make a jar file,but i have to use some external libraries in jar format.
I've read on sun tutorial and i've added to manifest this line:
Class-Path: dt.jar formshelp.jar formsrt.jar jh.jar looks-1.3.1.jar substance.jar TableLayout.jar
But the jar file doesn't work, neither with a double click nor with console...
Someone can help me?Thanks!:)Darkweb wrote:
sorry but,the external libraries that i use are in .jar,what i've to do to include these libraries in my jar?One of 3 things
1) Take them out of the jar, and put them in a folder, preferably a folder in the same folder as the jar
2) Write a custom classloader to load classes from nested jars
3) Extract the contents of all the dependency jars, and jar them all up with your own code
The first is almost always the most preferable, the second one is doable but brittle and resistent to updating dependencies ( you have to release everything for any changes you need, even if it's not a change in your own code ) and the third one is tedious and suffers from the same robustness problems of the second, not to mention that a lot of software licences prohibit you from actually doing it. Do the first one, it's by far the most common and easiest to maintain. I really wouldn't advise the third option, ever, though. Any activity that reduces the modularity of your application is ill-advised -
Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.
Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect. -
Pls help me.i have a problem with WRT54G wireless router.
Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..
hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.
-
Problem with Cisco 861W router and outgoing VPN
We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
Here is the Access Point Configuration:
Current configuration : 2100 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname obap
enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
no aaa new-model
dot11 syslog
dot11 ssid OLIVER
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 XXXXXXXXXXX
username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid OLIVER
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecti
ng AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
end
obap#
Here is the Router's Configuration:
Current configuration : 5908 bytes
! No configuration change since last restart
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname obrouter
boot-start-marker
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
no aaa new-model
memory-size iomem 10
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-1856757619
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1856757619
revocation-check none
rsakeypair TP-self-signed-1856757619
crypto pki certificate chain TP-self-signed-1856757619
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
quit
no ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp pool ccp-pool1
import all
network 192.168.0.0 255.255.255.0
dns-server 216.49.160.10 216.49.160.66
default-router 192.168.0.1
ip cef
no ip bootp server
ip domain name brushhog.com
ip name-server 216.49.160.10
ip name-server 216.49.160.66
license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $ES_WAN$$FW_OUTSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
duplex auto
speed auto
pppoe-client dial-pool-number 1
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXXXXXXXX
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
no cdp enable
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
Any help would be appreciatedHello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router. -
WRE54G wireless extender problem with WRT600N wireless router
My Vista laptops work fine with the WRT600N router but not with the WRE54G extender. On the other hand my XP laptop works fine with the wireless extender so I know that both router and extender are working. Linksys tech support told me that the WRE54G is not compatible with the WRT600N, which is simply not true. With my XP laptop the signal goes from poor (5-10 Mbps) without the extender to excellent (54 Mbps) with the extender. Also, the lower blue light on the extender blinks indicating data transmission. I can access the setup page of the extender only with the XP laptop and wired desktop computers but not the Vista laptops. I suspect there is a Vista network setting that is the problem. I've turned off the firewall but to no avail. I've also switched between mixed mode and G-only, which made no difference. Anybody have any suggestions?
pfl wrote:
I have a secure wireless network (WPA). Perhaps my 4-5 year old XP laptop is the only laptop on the planet that works with the WRE54G-WRT600N combination. But I can assure all the doubters that this laptop categorically works flawlessly when I would otherwise be out of range without an extender. Good luck to spalaw. Please let me know if you are get your WRT160n to work with the WRE54G, especially you're able to connect with a Vista laptop.
Hi
I am Afraid and wont be surprised if ya all people are nt able to use a N series Router with a G series Range Expander !
the Reasons is simple - N series is not BackWard Compatible as u check out the sources around. (Back Ward Compatible means compatible with the previous versions for its wireless Band , e:g - G band and B band.)
as far as my experience is concerned regarding the Range Expanders , me and my bud wasted a whole Week Configuring a WRT350N and WRE54G v3 , and it worked somehow on the seventh day for an hour and Lost the connection again! Dayumm !
and we tried setting up with the same expander with WRT54GS v7.2 , it worked like a charm.
Conclusion : " WRE54G is a g series 2.4 Ghz expander which will work fine with all g series router though may not work with N Serious routers."
and if you really wish to Use something which can actually Extend the range for ur N routers signals , Better go for WAP4400N !!!!!!
And if someone still wish to run around , wanna try some tweaks (which i dont preferr )!
for WRT600N , just enable 2.4ghz band . as Range expander doesnt support 5 Mhz.
Use Only standard Channels . e.g : 1,9,3,11 .(No Wide and stuff.)
Try using WEP encryption first . (cause thats how we made WRT350N worked for a while. sighs)
At last , Wish u Luck.
Pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com -
Macbook Pro Problems with D-Link Router
My router D-link (Dl-624+A, model available in Asia) 802.11g/2.4 Ghz wireless router serves a G5 iMac, a G4 Aluminum Powerbook plus a Windows laptop and desktop. We have never experienced any problems with the network.
I have recently bought a 17" Macbook Pro 2.4 Ghz laptop (intel MBP) and have not been able, in any combination of modes, to join the network. A dialogue box simply says that there was an error trying to join the network.
I have no problems joining other wireless networks around town its so easy, just the one at home is the problem.
What is going on? Is there a fix? ThanksHi, my MacBook Pro can't connect to my D-Link DSL-G604T router via wireless too.
Airport can see my wireless connection and asks for the WEP password to connect. I put the password key in and an error pops up saying it cannot connect. I can connect via an Ethernet cable. Also, my previous system PowerBook G4 is able to connect via to the router via wireless, hence there is nothing wrong with my network.
Based on the suggestions from other threads, I tried to set my security to WPA instead of WEP. However, after I set my security to WPA, and tried to connect to my wireless network, the AirPort popup only gives me 4 options for the Wireless Security:
WEP Password
WEP 40/128-bit hex
WEP 40/128-bit ASCII
LEAP
There isn't an option to use WPA. Can anyone advise? -
Problems with linksys wireless router please help!
Me and my 2 flat mates share a wireless network, and for some reasons if cannot connect to it. I have vista home premium and a belkin dongle. We used a Linksys router to begin with, not sure which model, but we recently had to buy a new one because that did not belong to us. I can see the network so the dongle picks up the signal but every time I connect and put in the network key I either get Not close enough to the net work point (the router is about 5 meters away) The network key is incorrect (I created the password and it works on the other two people lap tops) The network has timed out. Sometimes I can connect to the network for a moment then it kicks me off. The connection wizard shows the network at full signal. I’m not sure what the problem is, I have done a full restore on my computer and the dongle was installed onto my computer via the disc it came with. I do have another dongle that is a Linksys one; however it does the same thing. Not sure what the problem is here, can anyone help before I have to go out and buy long network cable and have wires all over my flat i have a heap of work that needs doing this week so any ideas would be really helpfull
I would first try and bring your computer (if possible) closer to the connection point. That way it will have full time to connect. Also sometimes some materials in the walls mess with connections due to the type of material. Sometimes if your IP address is not quite right you will connect but then get booted offline. Sometimes if you don’t broadcast your ssid you cannot connect. (one of my Visa Networks does this ssid broadcast must be on).
Are you using WPA or WEP because Sometimes WEP is not as stable with some wireless modems/ so changing to WPA might solve your problem
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+ -
Airport Extreme Problems with 802.11b router
I have a Netgear MR314 LAN and wireless router. I have a G3 iMac and 2 G3 iBooks with Airport Express cards and they work fine with the wireless connection with this router. I have a 12 inch G4 iBook with an Airport Extreme card running 10.4.3. Every time when this iBook connects with the wireless router it works for about 10 minutes and then the router locks up. If I re-set my cable modem and the router then the system will work again.
Because the router only goes up to the speed of 802.11b and not the 802.11g potential speed of the Airport Extreme I know that the card has to run at the slower speed when it connects with my router.
I am trying to determine whether my Airport Extreme card is defective. Any suggestions?
iBook G4 1.2 GHz Mac OS X (10.4.3)I have updated the firmware in the router and that seems to have fixed the problem.
ibook 12 Inch G4 1.2 GHz Mac OS X (10.4.4) -
WPA2 Problems with Linksys WAG120N Router
Hi,
with this router (wpa2 and b+g+n) the connection lost after minutes and the routers hangs up.
I will test today with b+g.
Does anyone also have problems with this router and the pb?
I don't want use WPA.
Regards
VolkerI had problem with my Router... The playbook would not see the router, or when it would it would disconnect after a few seconds.. I changed one setting and fixed it. All I did was change the wireless channel it was set at 12 - changed it to 2 and it connects every single time now. I didn't change the wireless type or encryption, just the channel and it works 100% now. I did a few tests and it seems to work fine in any channel apart from 12 (maybe RIM didn't think anyone would use that?) If your set to automatic, worth setting it manually just in case. So worth checking.
-
Problem with creation of site (SMWP)
Hi All
I am currently working on SAP SRM 7.0 , middleware settings for master data replication from SAP ECC to SRM.
I am facing a strange issue. when I try to create a site for backend ECC system in transaction SMWP. When I click on site attributes for typr R/3 and give the ECC RFC destination , system throws an error "Logical System is not defined in target system".
I have checked multiple times in ECC and SRM ALE settings where logical system for SRM and ECC is correctly defined. There seems to be no problems with RFC connections also in both ECC and SRM as I am able to remote log in.
Kindly let me know what could be the possible reason for this issue
Awaiting your reply
Pawan KeshwaniHi Nikhil
Thanks for your prompt reply. I have already checked this blog although I have doubts with my system Landscape definition.
While defining system landscape in "SPRO-> SRM Server-> Technical Basic settings->Define System Landscape" there are two attributes System Lanscape Directory Name and system Type. I might have put wrong information here.
Can you plz let me know what do you put in these fields? Is this information provided by BASIS team during installation?
Regards
Pawan -
Problems with creation of an HEAP Dump
Dear all,
I have tried to create a HEAP Dump (CntrBreak) with the Java-based SAPMC Console (Process Table => server<no.> => DumpStack, but I get no dump on operation system (/usr/sap/<SID>/JC01/j2ee/cluster/server0/). I set the parameter -XX:HeapDumpOnOutOfMemoryError -XX:HeapDumpOnCtrlBreak in the VM. Our Java version is 1.4.12, the OS is Sun Solaris.
Did anyone know why it not functioned in our solution?
Many thanks in advanced.
PatrickHi,
The Java based MC should provide the same functionality as the MMC. I tested today to trigger a heap dump as you have described and I had success.
As the "Dump Stack" action is a protected one, the user should be asked for user/pass. Is it also for you so?
And I have found several notes describing problems with the authentication of the sapstartsrv user on different unix platforms. As there is no action at all logged in your case, I guess that this could be the problem.
Here are the notes I found:
[Note 927637 - Web service authentication in sapstartsrv as of Release 7.00|https://service.sap.com/sap/support/notes/927637]
[Note 992907 - sapstartsrv user authentication on Solaris|https://service.sap.com/sap/support/notes/992907]
I hope this helps.
Have you tried already to perform the action from an MMC?
Regards,
Krum
Maybe you are looking for
-
Uploading an iCal Calendar into iWeb?
Hi I'm putting together a site for someone at the moment, I I wondered if you might be able to help me inbed an iCal calendar into an iWeb page please?
-
Transports BWD - BWQ !?
Hello all, How r u ? We transported the BWD myself Objects(InfoSets, Extract Structures & DataSources) to BWQ. The transport was successful and we could see the InfoSets and extract structures in the BWQ and not the DataSources. The SourceSystem Conv
-
HELP! I Accidentally deleted the iTunes folder in the My Music folder
HELP! I Accidentally deleted the iTunes folder in the My Music folder so I lost the two files iTunes Library.itl iTunes Music Library.xml As I understand it, these files contain all the play counts, ratings, etc. and I've spent weeks getting this inf
-
HT1386 can hear phone ringing, screen is blank, cannot access the iphone
help! my phone is ringing but screen is blank- cant access phone... any ideas?
-
Photomerge settings help, performance settings?
Having issues using photomerge with the latest version of Photoshop. I have about 120 images that are 16 mp RAW. What should I have my Photoshop Performance settings at? Cache Levels and Cache tile size? Also how much ram should I use? My system s