Problem with Cross-domain SSO, NTLM and ITS to R/3

Hello,
We are using EP 6.0.13.0 on a Windows environment. We have an ITS running WebGUI/ESS/MSS in another domain and that is the same domain where the R/3 and BI systems reside. We have configured NTLM authentication using IIS web server 6.0 and the IISProxy 1.6.2. We have configured SSO with the backends using the same ID as in the MS-ADS. Almost everything works fine.
The problem is that when we use the NTLM logon VIA the IIS to the portal, and then navigate to a WebGUI service transaction we are prompted for login. When we refresh the portal screen and try again - it works.
We have configured the mdc.hosts and are using the sendSAPSSO2Cookie.asp to generate the cross-domain logon ticket.
I have read that ITS may require the PAS be set up but I thought that was only used when you are going directly to the ITS (leveraging the NTLM authentication) - not when you are going through the portal.
Does anyone have some experience using ALL of the SSO features (i.e. SSO, cross-domain support, ITS, windows integrated authentication)?
We have though about the relax option for the domain but it does not apply as our domains are:
SERVER1.domain1.com and SERVER2.domain2.com
... so relaxing would not help unless we relaxed to the ".COM" which is unreasonable.
My regards,
Judson Maizels

Hi JUDSON
well i'll give one easy solution
make a alias under host file reside in winnt\system32\drivers\etc directory which has same domain name
i.e
SERVER1.domain1.com server1.mydomain.com
SERVER2.domain2.com server2.mydomain.com
it's works in my schenario we have a same system landscape
as you
regards,
kaushal

Similar Messages

Problem with a master tree table and its detail table

Hello,
I have a master treetable showing on a page and a separated detail table below the treetable on the same page.
To make the things clear, three tables are involved here: one master and one detail table to compose the treetable, and another detail table for the current selected row in the treetable.
Things usually work fine when operating on the detail table. However, if I create or delete some rows from the detail table and press Rollback, some unwanted behaviour happens.
In facts, on Rollback, both the master treetable and the detail table are redrawn on the page.
However, once refreshed, despite the current selected row in the treetable still appears as the one before clicking Rollback (suppose not the first one), the detail table always correspond to the first row of the master treetable.
Is there a way to either make the current selected row the first one the master treetable, or (preferred) to make detail table reflect the visible current selected row in the treetable?
thanks

jabr,
ok . i will go through
but if u don mine here john n timo says for me. pls check it.
on rollback
create insert options
Edited by: Erp on Oct 12, 2011 5:14 AM
Edited by: Erp on Oct 12, 2011 5:15 AM

HT201210 How to correct Problems with cross connections

How to correct Problems with cross connections

Nope not a wrg #, its been a call frm my mom, my son and my brothers that show on my ph, numbers that have been programmed in for years. Thanks

HT2500 Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

OAM - Cross Domain SSO Solution

Hello Experts,
We have two web applications X and Y both are deployed in Tomcat (two different tomcat and they are in different domain). Application X has its own native authentication mechanism(User ID and Password) and application Y does not have any authentication mechanism (has only User Id in its DB).
I have to implement cross domain SSO and Single Logout between these two applications.
I unserdtand that I have to install webgates for tomcat to protect those applications and configure policies.But I am wondering how to avoid displaying login page of application X after OAM Authentication?
Can this be achieved by configurations or require custom coding?
Please assist me.
Thanks
INIYA

Hi Iniya,
Couple of points -
1) There are no webgates for Tomcat. You would have to install reverse proxy web servers in front of the Tomcat servers and add webgates to the reverse proxies.
2) For avoiding the login page for application X, you would need a separate SDK based accessgate (custom-coded and plugged into Tomcat).
So no, without custom coding, you will not be able to achieve this.
For single logout, you will need to cross link the logout URLs for both domains so that visiting one logout link will log you out of both domains. However, it's more complicated for session timeouts.
-Vinod

Problem with Cross tabs

I have a problem with cross tab.
When I do grouping on date according to month and summarize the units I am getting the result as 58
while I do grouping without the croos tab generally in the details section I get the result to be 64.
I am not able to understand where is the problem.
Even when I write a query i get the answer as 64.

Hi,
Summarizing with a Cross-tab and creating a summary of a group are one and the same; I mean, the summary results are always the same.
Could you check the summary operation in the crosstab, could you confirm if it is not count or something else?
Also, create a summary and place it on the Group Header/Footer. It should be same as the Crosstab results for the that particular group.
-Abhilash

I have problem with my I PHONE 4S Always its time out then i must restart my I phone please any help about this case ??

i have problem with my I PHONE 4S Always its time out then i must restart my I phone please any help about this case ??

Hello Pllumb,
It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Restart your iOS device.
Make sure that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
Thank you for using Apple Support Communities.
All the very best,
Sterling

On a game website I keep getting a window that says cross domain receiver page and I cant get beyond it. What should I do?

'I am trying to play games on a website that requires the use of pop0ups. I have attempted to allow pop0ups on that website and now I get a window named "Cross-Domain Receiver Page". Its a blank page and I cannot go any further on the web-site. It just freezes there. Could you tell me how to get past this annoyance?

Having the same issue here. I unfortunately purchased a book on iTunes, then went to download iBooks, but can't due to their recent update/upgrade. My kids iTouchs are all 6.1.5 , So I'm guessing that if you did not have iBooks previously purchased that you are now S.O.L. if you want to read a book on your iPod??
I am rather frustrated that I spent money on a book that they can't read.
Is there another app that will let them read it?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

Problem with my laptop colour changing and some time moniter screen black out

i have a problem with my laptop screen some time its working ok but some time its going to changing and blinking colours and screen shows black out and not respend for 10 minutes or more.i want a solution for this.

Hi @hpsah
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a problem with your laptop screen changing and blinking through colours. I will be happy to help find a solution for this but you didn't give me information to work with. For future posts I suggest checking out Want Good Answers? Ask Good Questions. I will need to know what operating system you are using? What is the product number of the notebook? Does this issue happen if you connect an external monitor?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Cross-domain SSO, NTLM and ITS to R/3

Similar Messages

Maybe you are looking for