Problem with CS5 - Upgrade plugins?

Hi. I'm having trouble opening a file. I keep getting an error saying the plugins need to be updated (see image).
The file was created before I came to this job, but I'm pretty sure it was created in CS5, which is the version I'm trying to open it in.
Any help is greatly appreciated.

It is not a CS5 file
There is no upgrade to InDesign Plugins
Use this tool to identify the version
Identify Script

Similar Messages

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Problems with libraries and plugins - non admin account

I''ve got a couple of problems with a fresh install of photoshop on my windows Windows 7 64 bits system.
1. Libraries panel does not work. It displays the following error and interaction is not possible:
2. 3rd party plugins would load their content.
3. In the Creative Cloud Application the apps tab would load and displays the "download error" message:
The funny thing is that all the above errors don't occur on the loacl admin account. So I think this might be a permission problem. I think the most easy sollution would be to work under the admin account, but sadly that's no option (company policy). I am able to extent the rights of the useraccount I work on, but I don't know in wich folders the software needs write permissions. The both Adobe folders in program files and program files (x86) I already changed to full acces for all users. Can someone please help me?

Problems with libraries and plugins - non admin account https://forums.adobe.com/people/pippyn%20stortelder
This is a permissions Error. The other accounts on the computer do have permissions to use / change the administrator settings of these particular items.
There are two ways you can fix this. 1.) contact the admin of the system and let him know your accounts need read access to these items
My Preferred method is:
If you are on a Windows Account, then you can choose those items to run in Administrator mode for all people. ( win7,64bit )
Right click the infinity system for creative cloud (creative cloud icon - you would normally click to start the program. (not the one in your service tray, but the one in your menu area with the square red on it.
choose/click on properties
choose/click compatibility (tab at the top of the window)
Last boxed option on this screen is: Run Program As Administrator, Click that check box.
Click on Change Settings for All Users
in the window that comes up again choose, put an X in the box- the last option, Run Program As Administrator - Click Apply
Click OK
Click OK and the opened preferences window should now be closed.
You should be able to simply invoke the Cloud app now. But you might want to reboot to safe.
Depending on the installation methods used for your add-ons, you may have to perform this same process for all add-ins. I believe that would depend on which account, first installed the add-on and what level of permissions they have.
Good Luck
~elaine.

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, a

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, and it freezes. If I go to Task Manager, I can see the two Adobe apps sucking up CPU cycles. If I end the processes, then the other apps continue. Today, I uninstalled FlashPlayerPluginqand plugin-container. All day since I have had no freezing of an app. What should I do to correct the problem?

Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those.

I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

#1 Do a complete bootable backup of your drive before upgrading. That way should anything happen you can revert back to the start and try again.
Make sure you meet Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You might also want to make sure you don't have software issues with SL:
A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/

Security problem with Google Recaptcha plugin

Hi all,
Found a security problem with Google Recaptcha plugin. If I delete the tag containing the recaptch(on some page) with Firebug, I can authorize myself without validating with Recaptcha. If someone knows how to fix this problem, I'll be be very thankful.
Thanks in advance,
Regards Ivan

Hi Ivan,
you can secure it by adding an "Item specified is NOT NULL" validation to your page.
Will update the documentation and try to add a permanent fix in a new version of the plug-in.
Thanks for letting us know!
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Problems with iMovie DH plugins

When I start iMovie I receive 10 messages that say " there is a problem with" ten different plugins. They seem to work in the program, but I have to click "OK" tem times every time I state iMovie.

Hi
This problem occured for me to.
Origin - one faulty plug-in
Result - iMovie complained over all of them.
I did: Move out the plug-ins to desktop.
Move them back (in blocks to find out which one was faulty) but if You have
lot's of time test one at a time.
Yours Bengt W

Template problem with cs5

I've transferred all my sites to cs5 (from cs4). I build all my sites with DW templates. When I bring up my pages from any site in DW cs4, I can edit them no problem. When I bring them up in cs5, all of a sudden I have the "no-edit" symbol (red circle crossed) when I try to type over any editable areas. Is there a setting that I am missing that I forgot to readjust when I loaded the files in cs5?
Thanks in advance
Jules

I think I'm talking to myself, here...
But just in case anyone has run into this problem with cs5...
I usually create editable regions with content alone (minus divs). It seems that cs5 won't allow this somehow. I do this so that my clients won't move the div and can highlight the text that they want to change without screwing up the placement of the divs or having to click on it several times in Contribute in order to highlight the text.
Example: (This one works)
      
   <div id="contentLeft">
        <table width="100%" border="0" align="left" cellpadding="5" cellspacing="0" background="images/transBack.png">
        <tr><td>
          <h1>Heading Goes Here</h1>
          <p>Lorem ipsum eum erant soleat perfecto ex, ei pro mentitum aliquando theophrastus. Quodsi lucilius adolescens nec te, alia melius dissentias id eum, eu vel atqui munere eligendi. Eu eum viris suscipit, mei iracundia persequeris necessitatibus ad, qui putent vocent comprehensam ea. Eos sumo illud fuisset ea, sit doming dolorum fierent ea. Vis rebum aperiri nonummy at, ne eam impedit persequeris accommodare.</p>
          <p>An dico veritus evertitur cum, mentitum legendos theophrastus mei ei, qui hinc timeam honestatis ad. Ut illum takimata gloriatur eam, ei nullam propriae delicata vel, has ea solum ludus. Pro solum ridens inciderint ad, te ius vocent perfecto, partiendo scripserit reformidans cum te. No fastidii scaevola maiestatis mei, percipit praesent abhorreant eam no. Ea vim nobis dolore ignota, quodsi inciderint ei vel. Velit dicam te cum, te inermis principes percipitur per, animal constituam his an.</p>
          </td></tr>
          </table>
          </div>
      
          (This one doesn't)
   <div id="contentLeft">

        <table width="100%" border="0" align="left" cellpadding="5" cellspacing="0" background="images/transBack.png">
        <tr><td>
          <h1>Heading Goes Here</h1>
          <p>Lorem ipsum eum erant soleat perfecto ex, ei pro mentitum aliquando theophrastus. Quodsi lucilius adolescens nec te, alia melius dissentias id eum, eu vel atqui munere eligendi. Eu eum viris suscipit, mei iracundia persequeris necessitatibus ad, qui putent vocent comprehensam ea. Eos sumo illud fuisset ea, sit doming dolorum fierent ea. Vis rebum aperiri nonummy at, ne eam impedit persequeris accommodare.</p>
          <p>An dico veritus evertitur cum, mentitum legendos theophrastus mei ei, qui hinc timeam honestatis ad. Ut illum takimata gloriatur eam, ei nullam propriae delicata vel, has ea solum ludus. Pro solum ridens inciderint ad, te ius vocent perfecto, partiendo scripserit reformidans cum te. No fastidii scaevola maiestatis mei, percipit praesent abhorreant eam no. Ea vim nobis dolore ignota, quodsi inciderint ei vel. Velit dicam te cum, te inermis principes percipitur per, animal constituam his an.</p>
          </td></tr>
          </table>

          </div>
Anyone else have this? Or even use this?
Message was edited by: JulesN

Is there a known problem with Nik Software Plugins and PSE10

I replaced my PC with a new 64-bit Windows 7 workstation. Have used PSE10 for a while for my cataloging and editing and I did 'trial' individual Nik Software plugins on my old Vista PC for a while. I decided to purchase the Nik Software collection and also to take the plunge and go to Lightroom 4 as well. I put PSE10 on my new PC as well because I want to consider how I might modify my workflow to use both in conjunction (perhaps LR4 for cataloging and PSE10 for editing)
When it came to installing Nik Software Plugins (they are supposed to plugin to Elements and LR4) it seemed to find some of the plugins compatible with both PSE10 and LR4 , some compatible with one of them and some not compatable (apparently) with either, but installed them anyway. But when I use PSE10 now I cannot go from the Organizer into the Editor, it loads the editor interface but not the image. If you open PSE Editor directly and open an image, the image will load and you see 4 of the plugins and I invoke them but the changes dont seem to get applied in PSE10. Then I started reading up on the web ..... and the consensus seems to be it is not a Nik Software issue but an Abobe editor plugin issue.
On a side issue, the retailer I bought Nik Software from sent me no product keys (they sent me Apple Aperture keys) - now they are about to replace my delivery with a fresh issue and proper keys ... but if I run into the same problems again, I dont know what to do. This leads me to looking for some definitive advice from those in the know!
Should I forget about buying Nik Software plugins altogether?
I see a download is available for LR4-2 .. does anyone know if this fixes Nik Plugin issues there?
I am minded to go the route of using LR4 as my cataloging preference but to call PSE10 Editor for editing and have all my plugins operate out of PSE10, but I could not get the plugins to work with PSE10 as mentioned. How does one get them to work?
Is there some workaround or special "way" or "order" to install things ???
I'm still waiting days for some support from Nik Software ... but they are just going to say there is nothing wrong with their product (and the web seems to concur)
Any help would be appreciated on the PSE10 Issue.

17/10/2012. I installed the update - Lightroom 4.2
It keeps the same product key and found the catalog and the Windows Control Panel only seems V4.2 so the original has been replaced with this upgrade.
This would be the first time I put down Lightroom with Photoshop Elements V.10 already there on the system and I suspect this might have helped with better integration between the 2 products.
I made sure I then opened Photoshop Elements V10 and I could edit an image (that the Organizer invocation to Photoshop Elements Editor did sucessfully load the image) and I could use existing plugins like Topaz and Noiseware. Also I made sure Lightroom 4.2 could use "Edit with Photoshop Elements " and it did.
The supplier who had sent me the wrong Nik Software product keys, sent me a corrected version with product keys for Lightroom
Several web articles I read on Nik Software plugins may be misleading (for example there is one on DPReview) which state that Nik Software plugins are compatable with Photoshop (the main product) but are NOT compatable with Photoshop Elements v10. I can tell anyone who uses Photoshop Elements 10 that they ARE compatable with Photoshop Elements 10, but it can be a little tricky to get them going.
This is how I sucessfully managed to get the Nik Software Plug-ins
working (finally) on both Lightroom and Photoshop Elements v10 at the same time
Remember my scenario ... I am putting together a new 64 bit Windows 7 PC and I want to be able to continue to use my Photoshop Elements v10 and also to delve into Lightroom for the first time. I had read all the blurb on Nik Software and it said the plugins were compatable with both and I had downloaded and tested some of them on an old PC anyway, so I knew the principle of installation and operation.
I had just bought the Nik SOftware Complete Collection in September 2012.
The box and the CD they come with .... this is where one of the problems is. Let me explain...
Step 1:
=======
Some of the components on the CD are up to date .. and when you elect to install them the sofware tells you that it has found both Lightroom 4.2 and Photoshop Elements V10 and it installs the plugins no problem and they work. Make sure (in these cases) you take their defaults as to the locations the plugins are instlled to. Typically the dual install works for the following components
Nik Color Efex Prov V4
Nik Silver Efex V2
and the plugins go to
for Photoshop Elements v10 C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins\
for Lightroom 4 C:\users\xxxx\AppData\Roaming\Adobe\Lightroom\External Editor Presets\
After each of the above 2 installs finished I invoked Photoshop Elements v10 first and opened an image in Editor and made sure the plugin was working and inserted my product key and activated it over the web. I then made sure it was also working in Lightroom 4.2 - it was!
Step 2:
=======
When it came to installing the Sharpener 3 component off the vendor's CD, it displayed NEITHER of the two applications on its compatability list at all. And there was no "+" sign where one can add one manually. Furthermore if you continue with setup.exe it crashes. I closed the EXE and confirmed there was no plugin in Photoshop Elements v10 as expected for Sharpener.
But when I went into Lightroom 4.2 it shows me the 2 Sharpener entities (the RAW and Output one). And I used it and proved the plugins were working through Lightroom 4.2 and I inserted my product key for it when invoking it for the first time via Lightroom 4.2 as well.
Then I went onto the Nik Software download site and downloaded a more updated version which was Sharpener Version 3.01. When I ran the installer from this download it actually does see and show both Photoshop Elements v10 and Lightroom 4.2 as "compatable" and it installed the plugins from that .. and they both work ... even though I had it working already (seemingly) from the CD install I obviously installed over it and the plugin still works in Lightroom 4.2. It also works now in Photoshop Elements v10. Only issue I had here was I had to re-insert my product key and activate it when I used the plugin via Photoshop Elements v10 for the first time... but if that is the extent of a techincal difficulty - I would take it anytime!.
Step 3:
=======
When it came to installing Viveza 2 off the CD, it only saw Lightroom 4.2 as compatable. I did something similar in this case. I let it install to Lightroom 4.2 as a plugin and proved it worked and activated its produvt key. Then I downloaded V2.009 off the website. I re-installed from it (over the Lightroom 4.2 one obvously again) and it now also sees Photoshop Elements 10 as compatable and installs correctly. Strangely enough I did not have to enter my product key a second time when I went to invoke the plugins via Photoshop Elements v10 in this case. What the hell! - the subtleties of software!
Step 4:
=======
Dfine 2.0 - the setup for the CD again finds NEITHER of the 2 applications on its compatablity list, but it put it into Lightroom 4.2 anyway (like the Sharpener component behaved) and I proved it worked. Then I downloaded version 2.112 from the Nik Software website and it finds both applications compatable. Also I did have to re-enter my product key when first invoking the plugin via the Photoshop Elements v10 editor (like as in the case of Sharpener)
Step 5:
=======
HDR Efex Pro (which comes on the vendors CD with a promise to a free upgrade to HDR Efex Pro 2) .... the setup.exe sees Lightroom 4.2 as compatable but does not see Photoshop Elements v10. Be careful ... this component is NOT A PLUGIN ... to see and use it in Lightroom 4 you must select photos and then do menu option EXPORT WITH PRESET HDR EFEX PRO. It does not work as a plugin within Photoshop Elements (any version) . I obtained my free upgrade too and it works from Lightroom. Dont even try to configure it manually as a plugin for Elements. Instead if you save files as JPG or TIFF you can open the EXE directly in the Program Files area (if you have 64 bit make sure to open that EXE not the 32 bit one) and you can use it in standalone mode. There is only one menu option within HDr Efex Pro when using it this way ... File-Open.
So to conclude ... (leaving HDR Efex aside because we know it will not plugin to Elements) ... I have them all working in both Lightroom and Elements. As I begin to learn Lightroom and move away from Elements for cataloging and edits, I know I can invoke most of my workflow plugins from both products. People say I should persist in Lightroom, but if for some reason I dont, I have the fall back position of having everything working out of Elements 10 anyway. It's been a bit of chore getting to this point, but others might find my workaround useful.

Performance Problems PrPro CS5 - Upgrade to CS6?

Hi
we often notice massive performance problems with PrPro CS5 here.
e.g. last week we were shooting with a Sony NEX-VG10. (MediaInfo:)
Format: AVC
Format profile: [email protected]
Format settings, CABAC: Yes
Format settings, ReFrames: 2 frames
Format settings, GOP: M=2, N=13
Bit rate: 16.0 Mbps
Width: 1 920 pixels
Height: 1 080 pixels
Display aspect ratio: 16:9
Frame rate: 25 fps
After linking footage into PrPro plaback stutters.
PrPro is very often not responsive to the keyboard at all.
Sometimes PrPro needs some seconds before playback starts.
This way editing is a pain...
No fx in timeline, only one or two clips. Same behaviour if I play a clip in the source window.
Project and sequence settings are correct. Playback quality set to 1/4.
These problems occure in several projects with footage from different cameras.
PrPro works ok with this (PAL/SD-)footage for example - MediaInfo:
Format: DV
Commercial name: DVCPRO
Width: 720 pixels
Height: 576 pixels
Display aspect ratio: 16:9
About the computer:
Dell Precision WorkStation T5500
24 GB RAM
2 processors w/ 8 cores together: Intel Xeon CPU E5620 @ 2.40GHz
System: 250 GB (SSD)
Media: 2 TB (this is one normal internal hard drive, no raid)
NVIDIA Quadro 4000 (driver version 297.03)
connected to internet (is a must in this company)
connected to intranet, server (is a must in this company, too)
optimized for performance
windows firewall active
AVIRA Porfessional
What would PrPro force to work with HD footage?
Add an RAID? internal/external?
Upgrade to CS6?
Edncode footage to another codec before linking it into PrPro? (which codec? encode with AME?)
Buy a new processor? (i7? which one?)
Buy any Hardware pieces?
TIA for your guidiance and best regards.

Take a look at the Dell T7400 currently at rank # 568, 'Base2008PT1' on Benchmark Results. It is somewhat similar to your own system, but has more memory, a better video card and some raid0 arrays. Nevertheless, it is around 3.4 times slower than a fast system. My guess is that your system is even slower.
The material you try to edit is very demanding and requires a beefy computer. Even though there is nothing wrong with the dual Xeon E5620's, their clock speed works against you (I have the same CPU's in a file server, but that is far less demanding than editing), as does the amount of memory in the system. You can be helped with more disks, but don't expect miraculous performance improvements. But all little things help.
The alternative is a complete new system, but that can be pricey. Even if you build it yourself, see Planning & Building a NLE system it can be costly. It gives you very fast performance as demonstrated on the Reflections page and you should not get such a system from Dell or HP, unless you have unlimited funds.

SWF Problems with CS5.5

I am trying new Flash CS5.5. Has some new features that I need but having lots of trouble with posting the SWF. I created a scrolling text "panel" to insert into an HTML document. I admit I've never built that particular object HOWEVER, when I previewed it via Control > Test Movie, it worked great.
Then I exported the file via File > Export > Export Movie, double clicked it on the desktop ... also worked great. HOWEVER, when I emailed this file to a friend, the systems (both windows and Mac OS) asked user to select program the created the file. It would not open without Flash in the background.
I've used Flash CS4 and have never had a problem like this. BUT, that's not the end of it. When I went ahead and inserted the file into the HTML doc in Dreamweaver, then hit File > Preview in Browser > Safari (or Firefox), the following message popped up:
"Adobe Flash Player has stopped a potentially unsafe operation.
The following local application on your computer or network:
/Users/john/Desktop/jimednorman/Scripts/expressinstall.swf
is trying to communicate with this Internet-enabled location:
fpdownload.macromedia.com
To let this application communicate with the Internet, click Settings.
You must restart this application after changing your settings"
The problems are two:
1. I have no idea what to do in "settings". It is not clear at all as to what I'm supposed to change.
2. This still does not solve the problem with the swf file NOT playing unless Flash is running in the background.
Hey, I'm on my knees! Please help. I've never seen this and especially never had an issue with swf not playing on its own ... given that the "test movie" ran great.
What did I do wrong OR what have I left undone? Or do I need a spiritual advisor? (Don't answer that

Hello: I, too, am new to both the forum and Flash CS5, and am having a similar problem trying to get a Flash .swf file to play on my website. I've done all the things suggested here. I have tried "publishing" the fla , but, as dunb as this may sound, once the file has been published, I have no idea where it went. I can't find it anywhere on my system, and it's not in the site directory in Dreamweaver CS5. When I test the movie and the scene, it plays perfectly. When I double click the file, it plays perfectly. When I export the file to the Dreamweaver page (insert>media>SWF) the gray box appears on the page and when I save the page, all the files get uploaded. A "Script" directory is created under the root, with 2 files, and the .SWF file is in the root directory as well. The settings in Dreamweaver are all standard and there is nothing large or weird about the SWF itself. Essentially, it's a rotating graphic. Very basic. But when I open the web page, nothing appears. (Using Firefox). Even when I switch to IE, the page opens, but the SWF does not play. I've Googled every web site forum that addresses this issue and I can find nothing to make this work. When I "publish", I understand an .HTML file is created that should be put into the root of the server, but I have no idea what that file is or where it goes once it's created. A search for .html files on my system finds nothing more than the files I have created myself.
When I open my web site, instead of just displaying the title "Home Page", it says Home Page - Flash Player Installation - Index.html.
I just upgraded to Adobe Flash, Photoshop, Dreamweaver CS5 after years with Dreamweaver MX and Photoshop CS2. I've never had Flash Pro at all.
Can someone please tell me what I'm missing or doing wrong? My hair, fingernails, keyboard, ulcer, high blood pressure and dog all thank you.

Printing problems with CS5 to Xerox C320 Laser

Hi There,
I have recently upgraded from CS4 Windows to a new iMac with CS5. I was getting good prints out of the PC although when we switched to Mac CS5 I have been getting de saturated prints, no colour concistancy across progams and it is near impossible to colour callibrate.
I have double checked that I am using the correct driver for the Xerox C320 Document Centre, I have experimented with changing colour profiles. I just can't get a good colour out of any of the applications. Illustrator is the worst. The prints are coming out nothing like when they show on screen. I am really confused as all of the IT experts we have consulted with had advised us that printing on the Mac would produce a better print that the PC although this is not the case.
If anyone has any ideas of how to fix this problem it would be greately appreciated.
Thank you,

Hi There,
Thanks you for your response.
I use a Spyder 3 to callibrate my screen and I have had Syder experts in to show me how to callibrate the paper so we can set up profiles. This worked a little bit. It meant that I could see how de-saturated the print would come out. This didn't help the print quality at all.
Thank you for your advice. I will definantly look into some alternative devices.

Build problem with FlexBuilder 3 Plugin

Hi,
I am using the FlexBuilder 3 plugin with Eclipe Europa. I created a Flex project with J2EE backend and WTP support, so that I have both the Flex stuff and the J2EE stuff within the same project. I imported some mxml, as, and java files I had, and I was able to build and run my app using the default Eclipse build/deploy process. Everything worked except the BlazeDS (messagebroker servlet) part, so I decided to delete the Tomcat server (the Eclipse proxy of it), and start again with a new server config.
This somehow totally broke the build process. Some of the new config used port 8080 instead of 8400. And the only part of my app that was correctly deployed was the java files in the src folder. Properties files were not deployed, jar files were not deployed, even web.xml was not deployed.
After copying files manually into the Eclipse Tomcat proxy, everything worked fine, including object remoting and HTTPService invocation.
Can anyone share their experience with the FlexBuilder plugin for java webapps? What is the correct way to set it all up?
Thanks,
Miguel

Milesy wrote:
Hi.
I have upgraded from 1.5 APT to the 1.6 method of doing compile time annotations, and I am runing into a problem trying to build a jar containing my annotations processor.
I get the error from maven (mvn package)
[INFO] Compilation failure
error: Bad service configuration file, or exception thrown while constructing Processor object: javax.annotation.processing.Processor: Provider annotations.processing.processors.CodeAnnotationProcessor not foundFor me it worked when I used the settings
<plugins>
<plugin>
      <groupId>org.apache.maven.plugins</groupId>
      <artifactId>maven-compiler-plugin</artifactId>
      <configuration>
        <source>1.6</source>
        <target>1.6</target>
        <fork>true</fork>
        <executable>${java.home}/../bin/javac</executable>
        <compilerArgument>-proc:none</compilerArgument>
      </configuration>
    </plugin>
</plugins>
...Forking the compiler is perhaps not the best option, but its just for the annotation processor.

I had to buy a new computer and now can't get my CS3 with CS5 upgrade to work on windows 8.1. What can I do to get them to load and work?

I can load CS3, but it won't let me register it and I can load CS5 upgrade, but when I open CS5 it shows fault and closes. What can I do to get these programs to work on my new computer?

Registration has always been optional, so there is no point in trying. Those pages on the Adobe site are long gone. CS5 crashing is another matter, but without some crash logs and more detailed system information nobody can realyl know. This could be a mundane permissions issue on some files, could be a crash with the hardware acceleration stuff but just the same could be the activation system failing. Impossible to tell based on your limited information.
Mylenium

Problems with Mavericks upgrade?

Thinking about uprgrading to Mavericks, but have been coming across a lot of threads/reviews about people losing date and/or having real problems with the process. It's been a while since I've been here, and just wanted to ask for an opinion/advice. I'm using Snow Leopard 10.6.8. Should I stay away from it, or if I do, what advice/tips do you have for a smooth upgrade?
OR -- is it possible to get Mountian Lion Somewhere? I looked for it in the app store, but couldn't find it. I heard some negative reviews about Lion, so I just kept Snow Leopard, rather than take any chances with a new OS.

Mavericks is excellent on my MBP 8,2. Fast and flawless. Faster than Mountain Lion.
New features I like: iBooks, iCloud keychain, enhanced dictation.
A few things to consider:
Any new OS has some bugs and incompatibilities with old software and hardware. If you are uncomfortable with basic Mac troubleshooting, then perhaps waiting would be a better strategy. I didn't have any problems, with installation or after.
If you have any mission-critical software or peripherals, make sure they are compatible first. Check your apps for compatability here: RoaringApps - Application compatibility and feature support for OS X and iOS
Mavericks does not play well with some old/bad software and hardware:
Crapware: anything that purports to "clean", "monitor", "protect", or "accelerate" your mac. Unnecessary on Macs and often harmful. Examples: CleanMyMac and MacKeeper (the King of Crapware).
antivirus software. Unnecessary on Macs.
WD hard drives.
Before you install Mavericks:
backup your old system, either with Time Machine, or better yet, a bootable backup.
have enough RAM. The specs say 2GB, but 4 is probably a more realistic minimum.
uninstall Crapware, antivirus software, and any other junk you don't need.
repair your hard drive and permissions with Disk Utility
boot into safe mode, and then run the installer Mac OS X: What is Safe Boot, Safe Mode?
ML is available here: OS X Mountain Lion - Apple Store (U.S.)

Problem with CS5 - Upgrade plugins?

Similar Messages

Maybe you are looking for