Problem with CUBAC 8.6 Client in windows 7

after migration to Windows 7 in CUBAC 8.6 does not display the corporate directory, error: Could not download the user preferences.
In the Parameters of the operator of the status shows the server as offline, if I connect it connects without problems, but again becomes disconnected.
Someone can help me. thanks

Hello Jamie
There must be an order to perform the installation procedure and once installed or should I check what you mention?
I disabled the UAC
I have in my hosts file the ip and hostname of the server, ping arrived for both parameters
work with an administrator account
After installation of CUBAC, I checked the user permissions for Arc Solutions in the registry key.
But I still have the same problem, same error, I can not see my corporate directory.
The version I had before is the 8.5, I do some changes to my server for me to accept the version 8.6 for the client?
Thanks

Similar Messages

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Problems with games server and client

Hi! I am making an MMORPG game and I have problems with the server and client connection.
I can connect to the server, but when a second player does, the server console tells me this:
java.net.SocketException: Connection reset
After that, all clients disconnect.
Which is the problem?
How can I solve it?
Thank you so much

Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
 try {
 ServerSocket serverSock = new ServerSocket(PORT);
 Socket clientSock;
 while (true) {
 System.out.println("Waiting for a client...");
 clientSock = serverSock.accept();
 new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
 catch(Exception e)
 { System.out.println(e); }
} This is some code of TourServerHandler
public TourServerHandler(Socket s, TourGroup tg)
 this.tg = tg;
 clientSock = s;
 name= "?";
 cliAddr = clientSock.getInetAddress().getHostAddress();
 port = clientSock.getPort();
 System.out.println("Client connection from (" +
 cliAddr + ", " + port + ")");
public void run()
// process messages from the client
 try {
 // Get I/O streams from the socket
 BufferedReader in = new BufferedReader(
 new InputStreamReader( clientSock.getInputStream() ) );
 PrintWriter out =
new PrintWriter( clientSock.getOutputStream(), true );
// and here goes the rest... The TourServerHandler thread uses this code to send messages:
tg.broadcast(msg); tg.broadcast works like this:
synchronized public void broadcast(String cliAddr, int port, String msg)
// broadcast to everyone but original msg sender
 TouristInfo c; // this object stores info about the client
 for(int i=0; i < tourPeople.size(); i++) {
 c = (TouristInfo) tourPeople.get(i);
 c.sendMessage(msg);
} This is the error part
public void sendMessage(String msg)
PrintWriter out;
 out.println(msg);
 System.out.println("OK");
} I can't find any error but I still get that Connection reset exception...

We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

Problems with starting App-v packages in Windows 10

Hello,
I am testing some app-v 5 (sp3) packages on windows 10 (Build 9926). But with some packages I get this Error:
“The application was unable to start correctly (0xc0000142)”. Click OK to close the application"
This package contains Google Chrome 41.
This is the error I can find in the Event Viewer:
Log Name: Application
Source: Application Error
Date: 20/03/2015 13:06:42
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: %computername%
Description:
Faulting application name: chrome.exe, version: 41.0.2272.89, time stamp: 0x54fa819a
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x132c
Faulting application start time: 0x01d06306529e9124
Faulting application path: C:\Users\%username%\AppData\Local\Microsoft\AppV\Client\Integration\F6864A3D-8FDB-49D4-9E52-062D22FEA3B5\Root\VFS\ProgramFilesX86\Google\Chrome\Application\chrome.exe
Faulting module path: unknown
Report Id: 917fe03e-cef9-11e4-ab38-00155d016404
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-20T12:06:42.000000000Z" />
<EventRecordID>895</EventRecordID>
<Channel>Application</Channel>
<Computer>%computername%</Computer>
<Security />
</System>
<EventData>
<Data>chrome.exe</Data>
<Data>41.0.2272.89</Data>
<Data>54fa819a</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>00000000</Data>
<Data>132c</Data>
<Data>01d06306529e9124</Data>
<Data>C:\Users\%username%\AppData\Local\Microsoft\AppV\Client\Integration\F6864A3D-8FDB-49D4-9E52-062D22FEA3B5\Root\VFS\ProgramFilesX86\Google\Chrome\Application\chrome.exe</Data>
<Data>unknown</Data>
<Data>917fe03e-cef9-11e4-ab38-00155d016404</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
If I start the same package in Windows 8.1, no problems occur.
Chrome is not the only package that I have problems with.
I am still new in working with app-v.
Has anyone experienced the same problem and found a solution for it?

Hello,
Since Windows 10 is in technical preview I would guess that this is not supported by anyone.
Had one googled this the Three following top-topics would have showed up;
https://support.microsoft.com/en-us/kb/2777003?wa=wsignin1.0
https://packnowledge.wordpress.com/2014/04/28/launching-a-network-executable-inside-an-app-v-5-virtual-environment-revised/
http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

Hello i have problem with Skype 6.9 on my Windows ...

Hello every one ,
i have problem with my laptop so the problem is that i update my windows from 8 to 8.1.
Everything is fine with update but when i try to open my skype windows said that program is not working right and windows will close it.
So i uninstall my skype and i download 6.9 version of skype.
I installed right and when i try to open again i see the same message " windows will close that program becouse is not working right"
please i need help .i try everything but without succsses
Sorry about my english
Tnx in advance

TheScorpi wrote:
Име на приложение с грешки: Skype.exe, версия: 6.9.60.106, времево клеймо: 0x524c0c0b
Име на модул с грешки: msvcrt.dll, версия: 7.0.9600.16384, времево клеймо: 0x52158ff5
Код на изключение: 0xc0000005
Отместване на грешка: 0x0000b1b0
ИД на процес на грешка: 0x1914
Начален час на приложението с грешки: 0x01cecce1422934eb
Път на приложението с грешки: C:\Program Files (x86)\Skype\Phone\Skype.exe
Път на модула с грешки: C:\WINDOWS\SYSTEM32\msvcrt.dll
ИД на доклад: 82479583-38d4-11e3-be8b-08edb9eeea50
Пълно име на пакета с грешка:
ИД на свързаното с пакета с грешка приложение:
There are several other reports with the same error message (Faulting module: msvcrt.dll):
http://community.skype.com/t5/Windows-desktop-client/Skype-for-Desktop-stops-working-when-trying-to-...
http://community.skype.com/t5/Windows-desktop-client/skype-not-working/m-p/2013329/highlight/true#M1...
http://community.skype.com/t5/Windows-desktop-client/Skype-desktop-windows-8-1/m-p/2016887#M195292
http://community.skype.com/t5/Windows-desktop-client/Skype-crashes-on-Windows-8-1-Professional/m-p/1...
http://community.skype.com/t5/Windows-desktop-client/Skype-has-stopped-working/m-p/2019771#M195359
The solution seems to be to install .NET framework 3.5 from add windows features.
http://community.skype.com/t5/Windows-desktop-client/Skype-crashes-on-Windows-8-1-Professional/m-p/1...
http://msdn.microsoft.com/en-us/library/hh506443.aspx

Persistant problems with FF 27.0.1 on Windows 7/64

I seem to have a persistent problem with Firefox 27.0.1 and my MSN homepage. When I open FF, it takes me to both my Outlook Mail page and My MSN pages in two separate tabs. Outlook Mail had a problem taking my correct password, but that issue seems to have resolved itself (I did clear all cookies and caches related to the website). But My MSN is still giving me this message...
"The page you have requested cannot be found.
The web page you were attempting to view may not exist or may have moved — try checking the web address for typos."
I tried the same thing as I did with Outlook (deleted cookies and caches), but the problem persists. I disabled all plugins, and still no luck. The MSN Homepage comes up, and I'm shown as logged into My MSN, but when I click the My MSN link, I get the "The page you have requested..." message.
Another issue relating to both websites is password remembering. FF will NOT ask to remember the passwords for those sites. I have Remember Passwords box checked in Settings and it does for other sites, but not my Homepage(s). Clearing cookies/caches didn't help, and the password is not listed in the Remembered Passwords page of Settings.
Finally, Firefox on my home laptop (Windows 7/64 as well) freezes and crashes a lot, as well as displayes a warning there is something with Flash, which I have updated many times over.
I used to use Internet Explorer as a browser exclusively until I started having problems with certain websites not allowing me to log in. I realized it was not the website, but some incompatibility with IE. I started using Firefox, and fouind no problems, and heard it was more secure and easier to configure than Internet Explorer anyway. But since these problems started occurring (especially with NO way for me to log onto My MSN), I have to go back to using IE (except for select website logons), which is disappointing :-(.

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Problems with text using Photoshop CC on Windows 8.1

I am using Photoshop CC on Windows 8.1. I get flickering on the screen as described by others. My main problem, however, is that when I try to use the text tool the layer goes completely black and I cannot see what I am typing or edit the text. I have tried updating my video card driver and my monitor driver. I have deleted the font cache file, I have tried using Photoshop without plug ins (I use Nic plug ins). The only thing that has worked is resetting the preferences by holding down alt+control+shift keys when starting photoshop. This allows me to enter text normally on one photograph and one only. Once I have completed that first photograph and load another I get the black layer. I desperately need help. If this continues I will have to cancel my membership as I was much better off using my Photoshop Elements 11 disc.
Any help will be very gratefully appreciated...............help seems to be very difficult to come by Adobe you make it very difficult for your customers!

Ok,I can appreciate that I may not have given enough information. You state that without proper system information nobody can help, but I need to know what information is needed. You also state that I should simply turn off hardware acceleration in the perfs. What does that mean? How do I do that? I have tried changing the GPU Drawing Mode to basic and it didn't work. Is this what you mean? You may be assuming a level of knowledge I do not have. From research I have done this seems to be a problem with windows 8.1 that Adobe have been aware of for about a year. I have followed all the online advice I have been able to find but nothing seems to be working.
Siren2110

Problem with sap script table in main window

hi all,
i have created a sap script for which output is in 7 pages.
except first page all the remaining pages are giving the correct output.
the problem with the first page is iam not not getting vertical lines in the table which is in the main window of page 1.
iam getting the vertical lines correctly in the mainwindow table of all the remaining pages.

Hi,
It's simple,
Pre- U should had declared a second page for the same window with header, main & footer.
now
First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
or
when defing TEXT Go to PC Editor and mention all the fields Under PROTECT - ENDPROTECT.
This would solve the issue.
Thanks
Ravi

Compatibility problem with USMT 6.3.9600 and Windows Vista

Hi,
We have a problem with USMT 6.3.9600 ()ADK 8.1) while running on Vista. At start we are receiving an error saying it is not a win32 application. USMT 6.2.9200 would work on Vista but not on Windows 8.1.
Any workaround?

For an example with multiple USMT versions, see:
http://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Petition: problems with characters in mail sent to Windows computers

Sign this petition by replying to this thread if you have problems with garbled characters when sending e-mails to Windows computers. Let Apple know It's a huge problem for non-English e-mailing customers and there is no way to definitively fix it.
I'll start it off:
Christoffer Du Rietz
PowerBook G4 Mac OS X (10.4.7) 17" last generation G4

I'm not interested in knowing the gory technical
details, I want Apple to fix the problem. The problem
have existed for years. Non-english speaking Mac
users run a high risk of sending e-mails that look
like pure garbage on computers that use Windows. This
does not help when trying to convince people that
Macs are superior.
I want Apple to fix Mail. Because it is
2006!
Your views are reasonable, but you need to send them to Apple, not just to the other users trying to provide help with problems in these forums. The channel for this is
http://www.apple.com/macosx/feedback/
You could also consider providing some feedback to MS. The longstanding bugs in Outlook that cause these problems represent really second-rate programming (even if it makes sense for Apple to somehow cater to them in Mail's behavior).

Problems with OPMN process (very unstable) on Windows Vista

I am running SOA on Windows Vista(V10.1.3.1). I am having the following problems with the OPMN process
 
1) Shuts down when idle
 
2) After crashing I try to restart SOA Suite using the command line>opmnctl startall
 
I get the error message..."Unable to Open Service with error Access is denied."
 
If I use the command line>opmnctl start
 I get the error message but OPMN process starts????
 
3) but then...Crashes when trying to Deploy a webservice through Application Server Control.
 
Anyone else having these sort of issues and have come across a fix?
 
regards
 
Paul P

I'm also having the same problem (on XP) on 10.1.3.4 I'm guessing this is a security issue but can anyone tell me how this can be resolved.
It appears to work fine as Admin but regular users without Admin rights have the above issue.

Problem with users disabling ARD client service

I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
BTW, this would have to be done on multiple machines running both panther and tiger.
Any help would be appreciated as I'm not quite sure where to start.

First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

Problem with a navigation from a Popup Window in an other Window

Hi Experts,
i have a problem with a popup window. I explain my problem. I have a DC Component in which there are two different Windows (MainWindow and PopupWindow) and one of this Window is a popup Window. I desire to navigate from the popup window to the main window of the component. Is there a way to accomplish that ?
I have created the popupWindow and it works very good.
Thanks a lot for your help.
Gregorio Perillo
Edited by: GregorioPerillo on May 28, 2010 5:45 PM

Hi ,
By using this code you have to Open Popup Window
public void popup( )
//@@begin popup()
poplink=wdComponentAPI.getWindowManager().createModalWindow(wdComponentAPI.getComponentInfo().findInWindows("Wd_POPupwindow"));
poplink.setWindowPosition(500,30);
poplink.open();
//@@end
Wd_POPupwindow-- This is Window Name Under this window you can create in View that view having OK and Close Buttion.
When click on Submit button that time you call the popup method. that time you will get popup window
Regards
Vijay Kalluri

Problem with CUBAC 8.6 Client in windows 7

Similar Messages

Maybe you are looking for