Problem with Custom adapter

Hi All,
I am new to SUN Identity Management 7.1. I have developed a Custom Resource Adapter ,with this I am able to Create,Update,Disable,Enable a user in resource using tabbed form.But with Active Sync I am able to Create a user and not able to Update the user using active sync.
The real update method is getting invoked using active sync but the attribute values like
String genericID=user.getAttribute("genericID") etc are becoming null ie the values that are assigned are not passing to the real update method.
Please suggest me to solve this issue.Your suggestions are important.
Thanks,
Madhu

Hi All,
No one is coming with suggestions,I think I need to explain my query in detail.
I need to develop a custom adapter which should create,update,enable & disable a user in resource.
I have developed the adapter ,through form I am able to create,update,enable & disable in to resource.Through ActiveSync also I am able to create a user into resource but I am not able to update the user.
While creation of user, with active sync wizard I am placing values to extended attributes(columns names of a table in resouce).With those values the user is successfully created in to resource .
While updation of user,with active sync wizard I am modifying extended attribute values to update the user.This time the realUpdate method in the adapter class is getting invoked but I am not able to retrieve the extended attributes in the method.I am getting null for those attributes.I am retrieving those values by
            String s2 = user.getAttribute("BRID");
               System.out.println("brid : "+s2);
            String s3 = user.getAttribute("FunCode");
               System.out.println("FunCode : "+s3);
          String s4=user.getAttribute("email");
               System.out.println("email : "+s4);
            String s5 = user.getAttribute("MysqlSync Group");
               System.out.println("MysqlSync Group : "+s5);I completed almost 75% of my task and I struck here for the last one week.
Please give your valuable suggestions.
Thanks in advance
Madhu

Similar Messages

Problem with FTP Adapter in creating a new Folder

Hi all,
I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
be a problem with FTP adapter....can some one help.
Iam using SOA 10.1.3.4
Regards,
Edited by: 0racler on Mar 9, 2010 4:46 AM
Edited by: 0racler on Mar 9, 2010 5:49 AM

any thoughts????

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

Problem with Lightning Adapter after update to IOS 8.1

Dear all,
last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
Does anybody have the same problems with the connection to Docking Stations etc ?
best regards
Jens

measure the speed with speedtest http://www.speedtest.net
and maybe contact your carrier

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

Problem with custom navigation bar

I'm trying to create a custom left navigation bar with adaptive tag. when user click on the link it will direct to a pagelet which is created with page template. How can I do it? I don't understand what is pt:objectid? Where can I look for answer? I just need a simple example. Thank you.

You can get the object id from the "Edit this Community" feature under "My Communities" then look in "properties and names". If you look in the address bar you could also see the objid in there (objId=1234). I was having problems with this too.
What I did was use the ptdata tag like this:
<div id="topNav">
<pt:ptdata.currentcommunityiddata pt:id="currcomm" />
<pt:ptdata.subcommunitiesdata pt:commid="1234" pt:id="subcommunityPages" />
<ul>
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="3217">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">Home</pt:standard.openerlink>
</li>
<pt:logic.foreach pt:data="subcommunityPages" pt:var="varCommunityPage">
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="$varCommunityPage.objid">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:core.html pt:tag="a" href="$varCommunityPage.url" title="$varCommunityPage.title">
<pt:logic.value pt:value="$varCommunityPage.title"/>
</pt:core.html>
</li>
</pt:logic.foreach>
</ul>
</div>
This is for a community that has subcommunities. you could also do the same thing with pages instead.
Short explaination:
This line sets up a data object for the current community data and assigns it the variable name "currcomm":
<pt:ptdata.currentcommunityiddata pt:id="currcomm" />
This line gets the subcommunities for a particular community (in this case commid="1234" ). You specify which community with the pt:commid.
<pt:ptdata.subcommunitiesdata pt:commid="1234" pt:id="subcommunityPages" />
I used a <ul> for it but you could really do it any way you want.
I added a static "home" tab that will always link to my top level page of the community. this is optional and there may be a better way of doing it:
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="3217">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">Home</pt:standard.openerlink>
</li>
for a link to your page you can use this tag. You can get both the objectid and classid from the "properties and names" page as mentioned above. pt:mode is how/what should be displayed (The action of the link (Opener mode). 1 = Open, 2 = View, 3 =ViewMeta.)
<pt:standard.openerlink pt:objectid="3217" pt:classid="512" pt:mode="2">
I also have a choose in there to test if the current community you're in is the same as the community of the link. That lets me add a class="down" for a down state. 
This loops through all the subcommunities and builds a link in this format <li>TITLE OF COMMUNITY</li>. 
<pt:logic.foreach pt:data="subcommunityPages" pt:var="varCommunityPage">
<pt:standard.choose>
<pt:standard.when pt:test="isMatch" pt:str1="$currcomm.objid" pt:str2="$varCommunityPage.objid">
<li class="down">
</pt:standard.when>
<pt:standard.otherwise>
<li>
</pt:standard.otherwise>
</pt:standard.choose>
<pt:core.html pt:tag="a" href="$varCommunityPage.url" title="$varCommunityPage.title">
<pt:logic.value pt:value="$varCommunityPage.title"/>
</pt:core.html>
</li>
</pt:logic.foreach>

Hopefully that is what you're trying to do.
Like I said, you can use the same process for pages instead of subcommunities by using the communitypagesdata tag instead of subcommunitiesdata. You could also combine the two and list all the subcommunities with a foreach loop and inside each loop get the pages from the communitypagesdata with the commid set to the subcommunity objid for that subcommunity.
THis document is very helpful with PT tags... [url http://e-docs.bea.com/alui/devdoc/docs60/References/API_Libraries/TagDocs/index.html]http://e-docs.bea.com/alui/devdoc/docs60/References/API_Libraries/TagDocs/index.html
-Matt
Edited by thelimpingtoad at 03/14/2008 5:55 AM

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with custom form

Hey All,
Has anyone ever experience a problem with maximizing or resizing their custom form? I have a rather large form that every time I try to maximize or resize causes Business One to hang and crash.
Any ideas what might be causing this?

Hi Curtis,
Thanks for posting the solution... will keep it in mind!
Thanks,
Adele

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
 private static final String DEFAULT_STYLE_CLASS = "test-input";
 private TextField textField;
 private int id;
 public TestInput(final int ID) {
 super();
 id = ID;
 textField = new TextField();
 init();
 private void init() {
 getStyleClass().add(DEFAULT_STYLE_CLASS);
 public TextField getTextField() {
 return textField;
 @Override protected String getUserAgentStylesheet() {
 return getClass().getResource("testinput.css").toExternalForm();
 @Override public String toString() {
 return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
 private TestInput control;
 private TextField textField;
 private boolean initialized;
 public TestInputSkin(final TestInput CONTROL) {
 super(CONTROL, new TestInputBehavior(CONTROL));
 control = CONTROL;
 textField = control.getTextField();
 initialized = false;
 init();
 private void init() {
 initialized = true;
 paint();
 public final void paint() {
 if (!initialized) {
 init();
 getChildren().clear();
 getChildren().addAll(textField);
 @Override public final TestInput getSkinnable() {
 return control;
 @Override public final void dispose() {
 control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
 private TestInput control;
 public TestInputBehavior(final TestInput CONTROL) {
 super(CONTROL);
 control = CONTROL;
 control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
 @Override public void handle(final KeyEvent EVENT) {
 if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
 keyPressed(EVENT);
 control.focusedProperty().addListener(new ChangeListener<Boolean>() {
 @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
 if (isFocused) { isFocused(); } else { lostFocus(); }
 public void isFocused() {
 System.out.println(control.toString() + " got focus");
 control.getTextField().requestFocus();
 public void lostFocus() {
 System.out.println(control.toString() + " lost focus");
 public void keyPressed(KeyEvent EVENT) {
 if (KeyCode.TAB.equals(EVENT.getCode())) {
 control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
 -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
 TestInput input1;
 TestInput input2;
 TestInput input3;
 TextField input4;
 TextField input5;
 TextField input6;
 Scene scene;
 @Override public void start(final Stage STAGE) {
 setupStage(STAGE, setupScene());
 private Scene setupScene() {
 input1 = new TestInput(1);
 input2 = new TestInput(2);
 input3 = new TestInput(3);
 input4 = new TextField();
 input5 = new TextField();
 input6 = new TextField();
 GridPane pane = new GridPane();
 pane.add(input1, 1, 1);
 pane.add(input2, 1, 2);
 pane.add(input3, 1, 3);
 pane.add(input4, 2, 1);
 pane.add(input5, 2, 2);
 pane.add(input6, 2, 3);
 scene = new Scene(pane);
 return scene;
 private void setupStage(final Stage STAGE, final Scene SCENE) {
 STAGE.setTitle("Test");
 STAGE.setScene(SCENE);
 STAGE.show();
 public static void main(String[] args) {
 launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Printing Problem with custom size paper in Illustrator

Hi having problems with my custom sized paper print using my canon printers it's the same on both the ip100 and the pro-100s, it was printing fine until i've updated my illustrator and mac os Yosemite, it prints the image at a reduced size on the paper to what it should be does anyone have any understanding of this? I've tried everything i know, is this a driver or system problem?

Hi there wasn't an option to set the default printer to pdf where would I do this?
I've done a bit of a work around that seems to be working. I've put the page set up as A4 and then clicked on the printer utility custom settings and then unticked detect paper width, so I can put through the paper I want just got to tweak the x and y to get it right, its not the best but sitting here for four hours trying to figure it out, it will have to do for now. Thanks Jacob for your help, no doubt I'll be back in the morning, I'm burnt out now!

Problem with custom Reports and forms in R12

Hi All,
we are upgrading from 1103 to R12. In R12 we are facing a peculiar problem with Reports. All seeded reports are running perfectly. But no data is coming while running the custom reports. The operating unit field in the SRS window is getting populated automatically while running the seeded reports but getting greyed off while running custom reports.
We are facing the same problem with forms even, data is not getting retrieved in custom forms. Can any one suggest wether there is any profile option which is being missed out by us. ..
Thank you,
Regards
Raj

Add SRW.USER_EXIT('FND SRWINIT') in the afterPForm trigger.
This will set the org context for reports.
~Sukalyan Ghatak

Problems with Custom File Info Panel and Dublin Core

I'm creating a custom file info panel that uses the values of the dublin core description and keywords (subject) for two of it's own fields. I'm having problems with the panel saving if they enter the description on the custom panel first, and with the keywords not echoing each other, or reappearing after a save. Here is the code for the panel <?xml version="1.0"> <!DOCTYPE panel SYSTEM "http://ns.adobe.com/custompanels/1.0"> <panel title="$$$/matthew/FBPanelName=Testing for Matthew" version="1" type="custom_panel"> group(placement: place_column, spacing:gSpace, horizontal: align_fill, vertical: align_top) { group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/keywords = Keywords', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/keywordsFB = Keywords', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'subject'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/description = Description', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/descriptionFB = Description', locked: false, height: 60, v_scroller: true, horizontal: align_fill, xmp_ns_prefix: 'dc', xmp_namespace: 'http://purl.org/dc/elements/1.1/', xmp_path: 'description'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/season = Season', font: font_big_right, vertical: align_center); popup(fbname: '$$$/matthew/seasonFB = Season', items: '$$$/matthew/Season/Items={};option 3{option 3};option 2{option 2};option 1{option 1}', xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/', xmp_ns_prefix:'matthew', xmp_path:'season'); } group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top) { static_text(name: '$$$/matthew/ltf = Limited Text Field', font: font_big_right, vertical: align_center); edit_text(fbname: '$$$/matthew/ltf = Limited Text Field', locked: false, horizontal: align_fill, xmp_namespace:'http://monkeys.com/demo/testingmatthew/namespace/ ', xmp_ns_prefix:'matthew', xmp_path:'ltf'); } } </panel> Thanks for the help

To answer my own question:
The documentation really sucks.
I found this reply from Adobe <http://forums.adobe.com/message/2540890#2540890>
usually we recommend to install custom panels into the "user" location at:
WINDOWS XP: C:\Documents and Settings\username\Application Data\Adobe\XMP\Custom File Info Panels\2.0\panels\
WINDOWS VISTA: C\Users\username\AppData\Roaming\Adobe\XMP\Custom File Info Panels\2.0\panels\
MAC OS: /user/username/Application Data/Adobe/XMP/Custom File Info Panels/2.0/panels/
The reason why your panels did not work properly was a missing Flash trust file for that user location. Without such a trust file the embedded flash player refuses to "play" your custom panel.
Please see section "Trust files for custom panels" in the XMPFileInfo SDK Programmer's Guide on page 50 for all details on how to create such trust files.
After many wasted hours I have now the simple panels running.
Cheers,
H.Sup

Problem with Custom adapter

Similar Messages

Maybe you are looking for