Problem with custom ringtones

I just made about 7 new custom ringtones, but there is a problem transferring them to my phone. Each tone does not appear in the Settings -> Sounds -> Custom Ringtones part. Instead, I see whatever Ringtone I last synced listed about 7 times. Any suggestions?

Hi there, did you get your ringtone dilemma figured out? I am only able to sync one custom ringtone at a time onto my phone. There doesn't appear to be room for more than one. Were you able to create a whole menu of custom ringtones?? thanks.

Similar Messages

Problems with custom ringtone syncing after iOS update

I recently updated the iOS to the latest version and it wiped out my custom ringtones.
I resynced them but it only loaded three onto my phone.
I then tried to delete them but when I synced again they were still there.
I manually deleted the ringtones folder on the phone using ifunbox and they finally were deleted.
Then when I tried to syc my ringtones back it only synced three (different three).
Dragging and dropping isn't doing anything.

Hello is anyone from Adobe out there? Is anyone from Adobe monitoring the forum? The 1.6 update has stopped the app from crashing when you were trying the sync function to the creative cloud.
However, the sync function is not working as it did in the past. If you make a change in an already existing file in the Photoshop touch app and save it, the sync to the creative cloud results in an explanation point instead of a check to the left of the filename. Toggling the sync button on and off doesn't change the exclamation point to a check. The blue line goes across the file as it normally would when syncing but the explanation point remains. As a result, the changed file is not being synced with the creative cloud.
I am not sure of the exact amount of time it takes, I am guessing about 24 hours. After about 24 hours when you do a sync, the file that had the explanation point to the left of it does change to a checkmark. However, you now have two files. One that reflects the change and has the word conflicted now added to the file name. As well as a file with the same name that doesn't reflect the change and no conflicted added to its file name.
For me at least the sync function no longer causes the Photoshop touch app to crash. However, the 1.6 update also doesn't sync properly to the creative cloud.
Making a change to a file in the Photoshop touch app and trying to sync it shouldn't result in the file not being synced or in a conflicted file. Could someone please help me in regard to this issue.

Still having problems with custom ringtone

When I sync my iphone with PC to transfer my ringtone.m4r file, I get an error message in itunes "file was not transferred because it could not be found." All the preceding steps (setting up the file, AAC conversion, renaming, work ok. The file actually shows on my iPhone, and plays, but doesn't appear in the ringtones list anywhere.

I know. Alot of people think that 1.1.2 solved it. Looks like it didn't.
lenn

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes does not have a ringtone tab. I can not sync the ringtones.

I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes library does not have a ringtones tab. I can not sync the ringtones (or I don't know how)! Please help.

Yes, the file extension is M4R. Does it matter where I save these files on my Macbook? I then opened them in Itunes and played them. I did find the Tones folder in Itunes but the Tones or Ringtones tab does not show up when I select Iphone (within Itunes). When I open the Tones folder in the Library, it is empty. Thanks in advance for your help.

How to move iPhone contact list with custom ringtones to OS X server Contacts?

I have recently setup a new Mac Pro, Mid 2012, running Mavericks OS X Server. I was previously syncing through iTunes on Snow Leopard, 10.6...
Due to the changes in Mavericks WRT iTunes address book syncing, I want to setup Contacts in Server, as I do not want to use iCloud. I tried using the Address Book sync on my MacBook Pro, but that doesn't appear to save any custom ringtone data. I setup Contacts in Server & I moved the current address book to Mavericks, but dragging the contacts into the Server list in Contacts generates warnings, "Some contacts could not be copied to the server" and then sometimes starts duplicating the groups and contacts. The system log has some errors that seem related (system & user munged):
Jan 1 22:44:46 system.sub.domain Contacts[3203]: Error reading store metadata: Error Domain=NSCocoaErrorDomain Code=260 "The file \u201cAddressBook-v22.abcddb\u201d couldn\u2019t be opened because there is no such file." UserInfo=0x60000047ec80 {NSURL=file:///Users/kilroy/Library/Application%20Support/AddressBook/Sources/4 233913F-017D-4AA5-887A-E0957EECA4B0/AddressBook-v22.abcddb}
Jan 1 22:44:46 system.sub.domain Contacts[3203]: Database file is empty: /Users/kilroy/Library/Application Support/AddressBook/Sources/4233913F-017D-4AA5-887A-E0957EECA4B0/AddressBook-v2 2.abcddb
Jan 1 22:44:46 system.sub.domain Contacts[3203]: Failed adding account: The operation couldn\u2019t be completed. (AppleInternetAccountsErrorDomain error 13.)
AddressBook-v22.abcddb, does exists, T/S of 22:44. Maybe the above is actually a warning that it created the file? ... except the Failed adding account doesn't sound good.
Jan 1 23:30:37 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/677 0d3b722f65b9d1657bb55412ad071.vcf localETag:"29b0055eeb14610abbb7d2808c08e540" errorItem:(null) error:(null); NIL href or action
Jan 1 23:30:38 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/1ca 7c41d318c83472743fad0400ecdd3.vcf localETag:"aa2b10b8148984374a2117e87444f4d0" errorItem:(null) error:(null); NIL href or action
Jan 1 23:30:38 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] Exception caught while running sync with server: Error Domain=CoreDAVErrorDomain Code=1 "The operation couldn\u2019t be completed. (CoreDAVErrorDomain error 1.)"
1 23:30:41 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/86b 4883827ee841f0e6d01893a8ae225.vcf localETag:"79e207a20cf8e7052decba4fe9e1e743" errorItem:(null) error:(null); NIL href or action
Jan 1 23:30:41 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/90c 4c7aa12d6cb1fa4d68b2748fde985.vcf localETag:"d4ca80d1e1ac5dc69e08db5c0cb18835" errorItem:(null) error:(null); NIL href or action
So the question is:
How to does one move or import iPhone contact list with custom ringtones to OS X server Contacts? ... and will Contacts save/preserve the ringtone settings?
Thanks

lsof is the standard tool for listing open files, although I'm not quite sure it'll do what you want.
It will list every open file used by every process on the machine, including many you don't expect. I don't know how it will present files opened by network users - whether they'll appear as owned by the file sharing process or not at all. Definitely one to try.

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

I'm having problems with my ringtones please help

I have tried everything to fix my BB Curve problem even down to the battery.   I have custom ringtones set for my husband and other family members. So whenever they call or text I know who it is.. Now my issue is that if I get a text from my son his ringtone will sound than if I get a standard text my son's ringtone will go again. Not the default for just regular ringtones. I took off my facebook becuase someone said that could be a problem. Verizon sent me a new phone and I entered everything manually so if there was something wrong I wouldn't transfer the problem to the new phone. It's not fixed. If someone could please help me. I'm getting ready to turn my BB off completely it's that frustrating. Thank you for any help.

It sounds as if you are saying that any "non-specific" SMS sender receives that text tone of the last one you have set a personal tone for who has texted you?
I don't know. I can only say that if you use those instructon in the guideline, they work.
There is a user here named Cathlabnurse, she has a good understanding of these settings... Maybe you could send her a Private Message to review your settings with you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with custom form

Hey All,
Has anyone ever experience a problem with maximizing or resizing their custom form? I have a rather large form that every time I try to maximize or resize causes Business One to hang and crash.
Any ideas what might be causing this?

Hi Curtis,
Thanks for posting the solution... will keep it in mind!
Thanks,
Adele

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
    private static final String DEFAULT_STYLE_CLASS = "test-input";
    private TextField           textField;
    private int                 id;
    public TestInput(final int ID) {
        super();
        id = ID;
        textField = new TextField();
        init();
    private void init() {
        getStyleClass().add(DEFAULT_STYLE_CLASS);
    public TextField getTextField() {
        return textField;
    @Override protected String getUserAgentStylesheet() {
            return getClass().getResource("testinput.css").toExternalForm();
    @Override public String toString() {
        return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
    private TestInput control;
    private TextField textField;
    private boolean   initialized;
    public TestInputSkin(final TestInput CONTROL) {
        super(CONTROL, new TestInputBehavior(CONTROL));
        control     = CONTROL;
        textField   = control.getTextField();
        initialized = false;
        init();
    private void init() {
        initialized = true;
        paint();
    public final void paint() {
        if (!initialized) {
            init();
        getChildren().clear();
        getChildren().addAll(textField);
    @Override public final TestInput getSkinnable() {
        return control;
    @Override public final void dispose() {
        control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
    private TestInput control;
    public TestInputBehavior(final TestInput CONTROL) {
        super(CONTROL);
        control = CONTROL;
        control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
            @Override public void handle(final KeyEvent EVENT) {
                if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
                    keyPressed(EVENT);
        control.focusedProperty().addListener(new ChangeListener<Boolean>() {
            @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
                if (isFocused) { isFocused(); } else { lostFocus(); }
    public void isFocused() {
        System.out.println(control.toString() + " got focus");
        control.getTextField().requestFocus();
    public void lostFocus() {
        System.out.println(control.toString() + " lost focus");
    public void keyPressed(KeyEvent EVENT) {
        if (KeyCode.TAB.equals(EVENT.getCode())) {
            control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
    -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
    TestInput input1;
    TestInput input2;
    TestInput input3;
    TextField input4;
    TextField input5;
    TextField input6;
    Scene     scene;
    @Override public void start(final Stage STAGE) {
        setupStage(STAGE, setupScene());
    private Scene setupScene() {
        input1 = new TestInput(1);
        input2 = new TestInput(2);
        input3 = new TestInput(3);
        input4 = new TextField();
        input5 = new TextField();
        input6 = new TextField();
        GridPane pane = new GridPane();
        pane.add(input1, 1, 1);
        pane.add(input2, 1, 2);
        pane.add(input3, 1, 3);
        pane.add(input4, 2, 1);
        pane.add(input5, 2, 2);
        pane.add(input6, 2, 3);
        scene = new Scene(pane);
        return scene;
    private void setupStage(final Stage STAGE, final Scene SCENE) {
        STAGE.setTitle("Test");
        STAGE.setScene(SCENE);
        STAGE.show();
    public static void main(String[] args) {
        launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Printing Problem with custom size paper in Illustrator

Hi having problems with my custom sized paper print using my canon printers it's the same on both the ip100 and the pro-100s, it was printing fine until i've updated my illustrator and mac os Yosemite, it prints the image at a reduced size on the paper to what it should be does anyone have any understanding of this? I've tried everything i know, is this a driver or system problem?

Hi there wasn't an option to set the default printer to pdf where would I do this?
I've done a bit of a work around that seems to be working. I've put the page set up as A4 and then clicked on the printer utility custom settings and then unticked detect paper width, so I can put through the paper I want just got to tweak the x and y to get it right, its not the best but sitting here for four hours trying to figure it out, it will have to do for now. Thanks Jacob for your help, no doubt I'll be back in the morning, I'm burnt out now!

Problem with custom Reports and forms in R12

Hi All,
we are upgrading from 1103 to R12. In R12 we are facing a peculiar problem with Reports. All seeded reports are running perfectly. But no data is coming while running the custom reports. The operating unit field in the SRS window is getting populated automatically while running the seeded reports but getting greyed off while running custom reports.
We are facing the same problem with forms even, data is not getting retrieved in custom forms. Can any one suggest wether there is any profile option which is being missed out by us. ..
Thank you,
Regards
Raj

Add SRW.USER_EXIT('FND SRWINIT') in the afterPForm trigger.
This will set the org context for reports.
~Sukalyan Ghatak

Problem with custom ringtones

Similar Messages

Maybe you are looking for