Problem with customer exit variable on date range

Hi All,
I have customer exit variable on date range. In the selection screen it has to give the week range as a default (05/21/2009 to 05/27/2009).
Earlier its working fine and from yesterday onwards it is not working properly. yesday onwards default date range was not displaying in selection screen.
Wht would be the problem.
Thanks in Advance

Hi Ashish,
I checked every thing what u told earlier. Every thing is fine.
And another thing is
I have routine in infopackage level. Since day before yesterday it was working fine and yesterday onwards it was not working.
Eg: budat will take the data based on routine for the week. But yesterday onwards it is not picking up the data.however I have the data in datasource for the week.
Wht would be the problem. I debuged the code and its working fine.
Sekhar

Similar Messages

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Problem with customer exit variable

HI i have created a customer exit variable to rread a table based in user input and pass it to my variable , every thing works fine but i get a waring message in my WAD saying
RANGE-LOW for customer exit variable ZVSO_PRM corrected to # BRAIN 746
Does any one have any idea why is it comming
my code is as follows
WHEN 'ZVSO_PRM'.
IF I_STEP = 2.
DATA: BEGIN OF ZPROD_MODEL OCCURS 0,
I_PROD LIKE ZCURR_PM_T-/BIC/ZPRODMOD,
END OF ZPROD_MODEL.
DATA: BEGIN OF ZREGIO_TABLE OCCURS 0,
REGION LIKE ZCURR_PM_T-/BIC/ZREGION,
END OF ZREGIO_TABLE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZREG02'.
CLEAR L_S_RANGE.
ZREGIO_TABLE = LOC_VAR_RANGE-LOW.
APPEND ZREGIO_TABLE.
ENDLOOP.
LOOP AT ZREGIO_TABLE.
SELECT /BIC/ZPRODMOD FROM ZCURR_PM_T INTO TABLE ZPROD_MODEL WHERE /BIC/ZREGION = ZREGIO_TABLE-REGION.
APPEND ZPROD_MODEL.
ENDLOOP.
SORT ZPROD_MODEL.
CLEAR L_S_RANGE.
LOOP AT ZPROD_MODEL.
L_S_RANGE-LOW = ZPROD_MODEL-I_PROD.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

Customer exit variable for date range for the last day

Hi,
If user enters date ranges in variable
suppose user enters 9/1/2010 to 9/15/2010 and we have to calculate currency conversion based on last day i..e 9/15/2010 . 08
2)User input is date range 08/01/2010 to 08/30/2010
I need from the customer exit 08/30/2010 (on last day) to calculate currency conversion.
Can anyone help me with ABAP code to achieve this customer exit?And please tell me how to proceed step by step
Sridhar

create a variable to enter date range (ZDATE1)
create a key date variable(ZDATE2) with processing type customer exit, should not be ready for input.
In the exit ZXRSRU01 write below code.
DATA: l_s_range TYPE rsr_s_rangesid,
      loc_var_range LIKE rrrangeexit.
WHEN 'ZDATE2'.
    IF i_step = 2.
       read table i_t_var_range INTO loc_var_range
                with key vnam = 'ZDATE1'.
        CLEAR l_s_range.
        l_s_range-low = loc_var_range-high.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
    ENDIF.

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

Critical problem with customer exit scenario

Hi Gurus,
I have some critical prblm in designing the report.
we have one field say VOtype which holds numeric values..
and another column parameter whihc holds whihc type & corresponding values..
VOtype
1400   parameterA 1
1400   parameterA 2
1400   parameterB 3
1510   parameterA 3
1501   parameterA 3
1521   parameterB 4
now when user enters some variable X - value.. say X=3
the report should calulate total conisidering first 3 digits of VOtype so we hav four combination 140, 151, 150, 152
the report should see lik this
                                TotalA     TotalB
1400   parameterA 1
1400   parameterA 1
1400   parameterB 3
                                   2          3
1510   parameterA 3
                                   3          0
1501   parameterA 3
                                   3          0
1521   parameterB 4
                                   0          4
when user enters X=2
the report should calulate total conisidering first 2 digits of VOtype
so we hav only two combination 14, 15
the report should see lik this
                                     TotalA     TotalB
1400   parameterA 1
1400   parameterA 1
1400   parameterB 3
                                       2          3
1510   parameterA 3
1501   parameterA 3
1521   parameterB 4
                                       6          4
can you help me in handling this situation?..
whether i hav to go for customer exit?..
how can I represent the data in report as above.. like all the detailed lines & also total disply in report?..
points will be awarded ..for every solution..
Regards,
Naveen

Hi ,
U have to create a customer exit variable for the value type by assigning the value of each document type = required count
this is the solution for ur problem
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan

Text Variable replace with Customer Exit Variable

Dear Experts,
I created a text variable based on replacementh path (instead of customer exit). The reference characteristic is same that as my customer exit Variable and replace it by Key.
I want to replace it with already Existing Customer Exit Variable but it is not displaying in the List Box even though existing variable option is mandatory.
Can any one Suggest me the answer for this.
Regards
Supraja.K

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Authorization with customer exit variable (CP, BT, EQ)

Hi SDN-Experts,
I have a question concerning the new authorization concept.
I created an authorization for 0COSTCENTER which also contains the 3 special characters 0TCAACTVT, 0TCAIPROV and 0TCAVALID. I inserted a customer exit variable for 0COSTCENTER. The exit reads datasets from a db table which contains authorizations for the actual user. The authorizations have different formats, e.g. "1000", "1000;1200", "25*" etc.
The internal table e_t_range is filled as followed in the exit:
i   eq   1000
i   bt   1000   1200
i   cp   25*
This does not work. It works if I only use "eq" OR "cp". But not both at the same time.
How can I achieve to use the different authorizations in the db table for the bi authorization?
Thanks in advance...
Joerg

Hi Olivier.
Yes, the variable is defined as selection option and I did also try to use "EQ" instead of "CP".
I tested again with another variable which is "ready for input" and is not used in an authorization. The Variable is filled in the customer exit. This is the code:
WHEN 'ZJGR_COSTCTR_TEST'.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = '0000001000'.
l_s_range-high = '0000001200'.
APPEND l_s_range TO e_t_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'CP'.
l_s_range-low = '0000002*'.
APPEND l_s_range TO e_t_range.
The result in the variable screen in BEx Analyzer is the following:
1000 - 1200;0000002*;
And it still does not work. It seems that you could not mix EQ, BT and CP. But this is exactly what I have to do with the authorization variable...
Do you have any other tipps that I might try out?
Thanks,
Joerg

Problem with Customer exit

Hi,
I have a set of variables:
ZVAR_002 : Fiscal year period (User entry/mandatory/single value), Ready for input.
ZVAR_004 : Key date to derive Document Date (customer exit/mandatory/single value) used date as reference characteristic, Ready for input.
ZVAR_005 : Key date to derive net due date (Replacement path/optional/single value) used date as reference characteristic.
what i am trying to achieve is to derive a date from ZVAR_002(Fiscal year/period) into ZVAR_004.
example: 001.2007 - 31.07.2006
              010.2007 - 30.04.2007
i want the same value that is on ZVAR_004 to be used by ZVAR_005.
firstly i do not want ZVAR_004 to be ready for input, but i am getting error when i do not check the input ready box. is this a limitation?
Because i made ZVAR_004 mandatory when the variable screen pops up i am not able to leave the field blank as it requires me to enter some value. As mentioned above i do not want this variable to be displayed in the first place. i want to derive it from ZVAR_002.
I am using a customer exit to derive the value of ZVAR_004 from ZVAR_002. I am using the following code.
WHEN 'ZVAR_004'.
CLEAR: t_date.
      SELECT SINGLE low
      FROM RSZGLOBV
      INTO lv_fiscper
      WHERE objvers = 'A'
      AND   vnam =    'ZVAR_002'
      AND   iobjnm = '0FISCPER'.
      IF    sy-subrc IS INITIAL
        AND NOT lv_fiscper IS INITIAL.
        lv_fiscper_month = lv_fiscper+4(3).
        lv_fiscper_year = lv_fiscper+0(4).
        CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
          EXPORTING
            I_GJAHR        = lv_fiscper_year
            I_PERIV        = 'EM'
            I_POPER        = lv_fiscper_month
          IMPORTING
            E_DATE         = T_DATE
          EXCEPTIONS
            INPUT_FALSE    = 1
            T009_NOTFOUND = 2
            T009B_NOTFOUND = 3
            OTHERS         = 4.
        IF SY-SUBRC IS INITIAL.
          l_s_range-low    = T_DATE.
          l_s_range-sign   = 'I'.
          l_s_range-opt    = 'EQ'.
          APPEND l_s_range TO e_t_range.
        ENDIF.
      ELSE.
        CLEAR e_t_range.
      ENDIF.
What i find is the value that i give for ZVAR_002 is not updated in the in the table RSZGLOBV. Can anybody please help me resolve this issue.
Thanks in advance.
Ravi.

Hi All,
Fixed the issue myself.
ZVAR_002 : Fiscal year period (User entry/mandatory/single value), Ready for input.
ZVAR_004 : Key date to derive Document Date (customer exit/mandatory/single value) used date as reference characteristic, Ready for input.
ZVAR_005 : Key date to derive net due date (Replacement path/optional/single value) used date as reference characteristic.
as i have mentioned about these three variables earlier, the variable ZVAR_005 was set to replacement type and gets the value from ZVAR_004, as i require them same value.
Because my ZVAR_005 reis dependent on ZVAR_004 which inturn is dependent on ZVAR_002 the customer exit variable ZVAR_004 should be checked for ready for input and whcih inturn does not run the customer exit at step 2.

Problem with BW exit variable on range of dates

Hi everyone:
I have a problem with exit variables in BW, the scenary is following:
I need to generate a ratio MTD (month to date, i mean, first day of the month to actual date), for this, I enter a date by keyboard, for example 31.12.2010 and BW must return the range 01.12.2010 - 31.12.2010. The problem is what BW returns: 31.12.2010 - 31.12.2010, i mean, repeats the same date entry by keyboard.
For this porpuse I have a variable of interval type called "ZCALDAY" on infoobjeto 0CALDAY, and exit variable of interval type called "ZRANGE", the code in CMOD is the following:
DATA: L_RANGE         TYPE RRS0_S_VAR_RANGE,
            L_P_RANGE   TYPE RRS0_S_VAR_RANGE,
            L_S_RANGE   TYPE RSR_S_RANGESID.
when 'ZRANGE'.
     BREAK-POINT.
     IF I_STEP = 2.
       CLEAR l_s_range.
       READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZCALDAY'.
       CONCATENATE loc_var_range-low(6) '01' INTO l_s_range-low.
       l_s_range-high = loc_var_range-low.
       l_s_range-sign    = 'I'.
       l_s_range-opt     = 'BT'.
       APPEND l_s_range TO e_t_range.
    ENDIF.
I doing Something wrong with the variables definition or on the code??
I hope you can help me....
Best regards!!!!
Cesar.

Thanks!!
I think the problem is other, I check the RSRT transaction and the range is calculated ok, i mean, the range generated is 01.12.2010..31.12.2010.
But the query does not show the data corresponding. the query shows the values of the day 31.12.2010.
The interval are not restricting the key figure...
I used the variable exit "ZRANGE" on the key figure restriction and the variable ZCALDAY in the filters section.
Maybe, the variable definition is wrong (variable ZCALDAY and exit variable ZRANGE)
Thanks!!!

Error With Customer Exit Variable

Hi,
I need To Create Customer Exit For Text Variable based on Two Input Variable values.
can any one correct my code Code is written below based on quarter and Fiscalyearvarient.
I have to get calmonth Text value.
I am getting the error as : "I_T_VAR_RANGE" is a table without a header line and therefore has no
Component Called "0PERIV".
DATA : l_s_range TYPE rsr_s_rangesid,
        loc_var_range LIKE rrrangeexit.
IF i_step = 2.
CASE i_vnam.
   WHEN 'ZTXT_CML' .
      CLEAR: l_s_range.
      LOOP AT i_t_var_range INTO L_S_VNAM WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
        IF i_t_Var_range-0PERIV = 'IE'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ELSEIF i_t_var_range-0PERIV = 'K4'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ENDIF.
          APPEND l_s_range TO e_t_range.
      ENDLOOP.
ENDCASE.
ENDIF.

Hi Supraja,
You would have to declare I_T_VAR_RANGE internal table as the table with an header line.
This you will find in data declaration segment.
ie
DATA : I_T_VAR_RANGE type <table name> WITH HEADER LINE.
or
Create a work area like l_s_var_range.
Use work area while performing operations in your code and later append the record to the table i_t_var_range.
DATA : L_S_VAR_RANGE type i_t_var_range.
Also, i_step = 3 is the right one, because you are processing the customer exit based on the values of the user input of two variables.
Modified code below.
DATA : l_s_range TYPE rsr_s_rangesid.
DATA : L_S_VAR_RANGE type i_t_var_range,
loc_var_range LIKE rrrangeexit.
IF i_step = 3.
CASE i_vnam.
WHEN 'ZTXT_CML' .
CLEAR: l_s_range.
LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
IF l svar_range -0PERIV = 'IE'.
IF l_s_var_range -ZQUAR = '1'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIFl_s_var_range -ZQUAR = '4'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ELSEIFl_s_var_range -0PERIV = 'K4'.
IF i_t_var_range-ZQUAR = '1'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '4'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ENDIF.
APPEND l_s_range TO e_t_range.
ENDLOOP.
ENDCASE.
ENDIF.
Hope it helps,
Best regards,
Sunmit.

Help with Customer exit variable

Hi Guys,
     I need your urgent help. I have a requirement where I need to create a variable (on CALDAY) in a report which should use the input value given for another variable (created on CALMONTH). To put in words more clearly, CALMONTH is a variable that is mandatory for input but the CALDAY variable should not appear on the selection screen. I was told that I should write a customer exit to make this happen. So can someone please explain me the process of creating a customer exit and give me the code.
WHEN CALMONTH values are selected to be 07/2006 - 08/2006... CALDAY values should be 07/01/2006 to 08/31/2006.
CALMONTH is user entry, mandatory, range and multiple selection variable.
Early reply is highly appreciated and duely rewarded. Please let me know if I am not clear about the requirement. Thanks a bunch in advance.

Let us say, user enters multiple ranges for the month, you would want corresponding date ranges for the same, right?
data : w_date like sy-datum.
case I_VNAM.
when 'ZCALDAY'. " Calday var
loop at i_t_var_range into LOC_VAR_RANGE
     where iobjnm = 'ZCALMONTH'.
WA_RANGE-SIGN = 'I'.
wa_date+2(6) = loc_var_Range-low.
wa_date+0(2) = '01'.
wa_range-low = wa_date.
if loc_var_range-high eq space.
    WA_RANGE-OPT = 'EQ'.
else.
    wa_range-opt = 'BT'.
    wa_date+2(6) = loc_var_range-high.
    wa_date+0(2) = '01'.
    wa_date = wa_date + 31.
    wa_date+0(2) = '01'.
    wa_date = wa_date - 1.
    wa_range-high = wa_date.
   endif.
   append wa_range to e_t_range. clear wa_range.
endloop.
endcase.
This should do.

Problem with customer exit EXIT_SAPLL03A_002:

hello all ,
i have to write some code in the customer exit 'EXIT_SAPLL03A_002'. this customer exit will trigger while creating a transfer order using LT01,LT02 or LT03 transaction . the standard program for all these transactions is SAPML03T . The customer exit EXIT_SAPLL03A_002 is present inside the Standard program SAPML03T. i have to change the storage type indicator value in the internal table imlvs which is present in the standard program SAPML03T.but when i try to access this internal table inside the exit 'EXIT_SAPLL03A_002'.it is showing syntax error as 'IMLVS is not found '.
How can i make use of field symbols in this case ?
can we declare a field symbol as internal table .
my requirement is to change th value of (SAPML03T)IMLVS-LTKZE inside the customer exit 'EXIT_SAPLL03A_002'.
Thanks in advance ,
pavan.

Hi,
Here is the example for your reference. I am trying to change the shipping condition in the internal table.
FIELD-SYMBOLS: <fs> TYPE table,
               <fs_ekpv> TYPE cekpv.
DATA:lv_structurename(40) TYPE c,
     lv_ttype TYPE cifapottype,
     xekpv TYPE TABLE OF ekpv.
DATA:lv_vsbed TYPE vsbed.
lv_structurename = '(SAPMM06E)PTV[]'.
ASSIGN (lv_structurename) TO <fs>.
IF <fs> IS ASSIGNED.
IMPORT lv_ttype FROM MEMORY ID 'ZAPO_TTYPE'.
CHECK NOT lv_ttype IS INITIAL.
CLEAR lv_vsbed.
SELECT SINGLE vsbed
         FROM ztlb_transport
          INTO lv_vsbed WHERE ttype = lv_ttype.
IF NOT lv_vsbed IS INITIAL.
    LOOP AT <fs> ASSIGNING <fs_ekpv>.
      <fs_ekpv>-vsbed = lv_vsbed.
    ENDLOOP.
ENDIF.
ENDIF.
Thanks,
Vamshi.

Problem with customer exit variable on date range

Similar Messages

Maybe you are looking for