Problem with customization of graph

Hi experts,
I am facing some problem in customizing graphs created through Report Builder. I am having some values on x-axis like employee name (emp-code).
e.g. Janak Nirmal (007)
I did one thing that i m only displaying emp-code on x-axis. i.e. 007
now i want to show user also which emp-code is bind to employee name any where in graph.
i.e. 007=Janak Nirmal
is this customization possible ?
how do i include it in jsp page ? how do i customize graph x-axis.
Is there any way to do this ?
Please help me i m in critical stage of project
Thanks in advance.
Janak

Can any one help ?
Please i need help.
Regards
Janka

Similar Messages

Problems with Flash Line Graphs

I have two problems with the new Flash Line Graphs in APEX 3.1
1. I have created a query that returns a set number of rows. Sometimes the VALUE for a specific row might be null. When this occurs the LABEL data does not show up on the X axis. I want the LABEL data to show up no matter what. How do I accomplish this?
2. Related to the above query. When the VALUE field is null for 3 records (or more) in a row, not only does the LABEL data for those records not display, the VALUE and LABEL data for the records that appear in the set after these 3 records also do not display. If one or even two null VALUE fields appears in a row, things are still OK. What do I need to do to get all my data to display?
Any help would be appreciated.
THANKS
Raymond

Raymond,
For the Interactive report chart issue, could it be related to this?
Re: Apex 3.1. Interactive Report. Questions and Problems.
Interactive Report. Chart. Seems to be bug...
- Christina

Problems with express xy graph

Hi,
I am new to Labview. I am using Labview 8.5. I wish to create a program which reads in an excel spreadsheet and displays the data on an express xy graph. I have been able to read my excel spreadsheet into labview but cannot display a graph in my express xy graph. The express xy graph plots only one point and I do not understand why. I would be grateful if someone could please advise me on what the problem could be. The block diagram is shown below.
Your help is very much appreciated. Thank You.
Dibz

To elset191: I have actually added a transpose array between the Read From Spreadsheet and the express xy graph and it now displays a full graph! Thank you. I mistakenly thought the xy graph read in the data in columns rather than rows. However, the y-axis values is a 2D array. Therefore, ideally I would like each row of this data to generate its own plot on the xy graph. Can it do this? At the moment the express xy graph looks like its only reading in the first row of y-axis 2D array. Would I be able to somehow show multiple plots on the express xy graph for each row of the data?
To Dennis Knutson: Apologies, but i thought it would have been assumed that as you cannot read in native excel files as you said, then obviously I had converted the file if I initially stated I had read it into Labview. Also, as stated above the y-axis is actually a 2D array which is why I used the 2D array to display it. Granted, the x-axis values is a single array but no problems were incurred so I did not get around to changing it.

Problem With Plotting a graph

Hi,
I need help plotting a graph.
The situation is .... I have data of speed against time. Data is like this : a truck runs at some speed until 10 o clock. Now the driver changes time of the speed vs. time tracking device back to 9 o clock. Now if I plot this data it becomes a invalid graph as between 9 - 10 I will be having two values for the speed.
I thought of a solution that when ever a time change occurs I will drop the speed to 0 and again start plotting the graph with next point on the scale of x axis with the new set time ...... Is this possible ?
Please help.
Thanks and regards
Anirudh

Hi,
Here is a photo of what I want to do with the graph.
Here as the values that i am mappinng on x axis are repeated the graph is not one to one. Now to make it look like a one to one i want to drop it zero at the first 6. the restart the scale after 6 as 5 and continue mapping. Is this possible ?? ??
Thanks and Regards,
Anirudh.
Attachments:
tr1.JPG ‏113 KB

Problem with customization

Hie all,
When I am trying to change the logo on log-in page it's not effecting on log-in page.I first went to identity page activated customization mode and opened again log-in page in another tab and did the changes and published the sandbox.
Now the problem I am facing is I am unable to see any logo and when I am again trying to open in customization mode it is showing that logo.

Two things here
1. To get the logo on the login page
please upload the image to oracle.iam.ui.view.war by following these steps and let us know the result.
cp /app/Middleware/Oracle_IDM1/server/apps/oracle.iam.ui.view.war /opt
mv /app/Middleware/Oracle_IDM1/server/apps/oracle.iam.ui.view.war /opt/oracle.iam.ui.view.war.bak
mkdir /opt/view
cd /opt/view
jar xvf ../oracle.iam.ui.view.war
rm /opt/oracle.iam.ui.view.war
cp /app/Middleware/Oracle_IDM1/server/apps/oim.ear/eidms-banner.png images/oim_graphic_v1.2.png
jar -cvfM /opt/oracle.iam.ui.view.war .
cp /opt/oracle.iam.ui.view.war /app/Middleware/Oracle_IDM1/server/apps/oracle.iam.ui.view.war
2. for the logged in pages follow the oracle doc.

Re: is anyone else having a problem with 2-D graph of LVM data some x values showing up as negative values?

attached is the lvm file

This is a side post from Original Post and should be responded to there.

Problem with autoscale on 3d graph (new)

Hi
I have a problem with scaling on the 3D graph (it doesn't work, see attached figures). I've read about the bugs found but this one is not mentioned. Do you guys have any suggestions ? (or I am doing something wrong ?)
thanks
Attachments:
3d_image.png ‏36 KB
3d_graph..png ‏8 KB

Update: The CAR id for the autoscaling issue mentioned in this thread is not 148431. The new CAR id is 209191. Thank you
Message Edited by Nitin T on 02-22-2010 09:53 AM

Problems with XY Graph "forgetting" plot properties

I am having trouble with an XT Graph in my loop.
The graph has 10 plots which at any time can have anything from 0 to ~1000 points, often some plots will have significantly less ploints than others. There is a user selectable option to display all points or just the most recent set.
My problem is that I want the graph to reflect the input data by plotting a single point at the time of an update, so I have a string of points rather than a line.
When I right click the graph and go into properties, I change the point style to solid circle and turn off line interpolation. I then click save these values as default, and save the vi.
However, once I run the vi, the graph always reverts plots 1 to 9 (not plot 0, this stays as I want it) to have no points displayed and line interpolation on.
Has anyone had this problem before? Ho did you fix it?
I know it can be fixed, as I had this probelm a few months ago on a similar vi and after weeks of struggle I solved it, however I just cannot remember how I did it.
Thank you for any help, at the moment I can't post any code. Note that the data the graph shows is all perfectly fine, just the plot properties are being forgotten.
Solved!
Go to Solution.

HI DarraghCorrigan,
In relation to the problem expressed in your initial post:
"once I run the vi, the graph always reverts plots 1 to 9 (not plot 0, this stays as I want it) to have no points displayed and line interpolation on"
This is due to a bug in the LabVIEW software whereby any changes that are made to the plot properties (e.g. to change the colour of a plot) will not be retained, except in plot 0 which is unaffected. Our R&D department are currently investigating this problem so that it can be fixed in future version of the software. The recommended workaround for this problem is to pragmatically set the plot settings at the beginning of the code using property nodes.
As I understand it, this is not the main problem that you are experiencing. If you set up the properties for a plot (using some of the described property nodes) which is subsequently removed or rewritten on an XY Graph, my understanding is that there is no way that LabVIEW can remember and retain these properties.
As you rightly suggested, one way of conveniently overcoming this problem would be to set default plot properties so that when you remove/rewrite a plot and then add it again, it will always default to those properties. Unfortunately, it is not currently possible to do this though it has been recommended as a product suggestion so it is a feature that is under consideration for implementation in future releases of LabVIEW.
I think the issue you need to be addressing is the fact that you are at some point resetting the graph by sending an empty array to it such that all of your properties are lost. If you can find and remove this section in your code, you should be able to overcome your problem.
I hope this helps.
Best Regards,
Christian Hartshorne
NIUK

Problem with printing graph larger than screen size in labview6 (plots are shopped).

I have attached with my message the report I try to print. It is a Labview 6 vi.
I had no problem with Labview 5. But with Labview 6, the plots are shopped (all the rest of the report is correct). What is printed is not what I see.
The graph is intentionnaly built very large, then rescale to fit page, in order to improve the print quality of the plots. I repeat it, it worked fine with Labview 5.
Thanks if you can help.
Lionel.
Attachments:
Print_of_large_scale_graph.vi ‏284 KB

Hi Lionel,
I experienced a similar problem days ago: re-compiling a vi from LV 5.1 to LV 6.0.2 its front panel could not be printed anymore; no error, just a blank sheet.( The mass compile procedure did not reported any error).
The only way to get out from this headache was to re-build the vi in LV 6.0.2, I simply selected all its diagram and copied it in a new vi, saved it and I got print-outs!
Try it.
Good luck,
Alberto

Problem removing old versions with customization wizard 8

I'm trying to deploy Acrobat Reader 8 to our XP Professional desktops via Active Directory software installation (Windows Server 2003 domain)
I have obtained the MSI release of Reader 8, customised it using Adobe Customization Wizard 8, and deployed it through AD as per the Adobe documentation. This works as expected for new machines without a previous release of Reader installed.
However for desktops that have Reader 6 or 7 installed, we end up with two versions installed side by side (visible in Add/Remove Programs). Reader 8 works fine at this point. Removing the older version causes the PDF file association that Reader 8 created to be broken, also the Internet Explorer browser plugin is broken. Reader 8 has to be reinstalled manually to fix this issue.
I have read that Reader automatically removes old versions of itself when you install a new version. Additionally, when customising the MSI, "Remove previous version of Reader" is greyed out. However it appears that the installer is not removing old versions.
Any ideas as to a solution?
Thanks a lot
Tom Fanning

I have the same problem and i have wasted like 50 hours on this s**t. I'm trying to deploy reader 8 on our 1800 XP workstations with SMS 2003.
The cutomization tool is totally useless. The only way i have came up with is to create a script wich checks if earlier versions of Adobe reader is installed by looking if the installation folders exists (for example c:\Program Files\Adobe\Acrobat 7.0\Reader ).
If the installation folders exists, the script would run the uninstallatoin string of the reader using its Windows installer product code, like this:
MsiExec.exe /x /qn {AC76BA86-7AD7-1035-7B44-A70000000000}
Now, the problem with the script is that we have several versions of reader 6 and 7 including 3 different languages. The script or the .BAT file would be quite complicated and the testing is allmost impossible.
I think that it would be much more easier to create a script that deletes all the shotcuts for Adobe reader and then installs a Freeware product for openig PDF files.
http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer
In my opinion, adobe products are a nightmare for IT admins and their support system is even worse than Microsofts.

Problem with Graphs

Hi
We are facing a strange problem with graphs in BeX.
We are making graph on summarized data and storing it in workbooks.The problem im facing is that whenever the query is refreshed the Graph gets scattered.for e.g X axis becomes Y and things like that,
pls share your experience and a way to fix this problem
JPJP

hi jaya
thanks for your response
i shall try upgrading and also check the note,
Thanks
JP

Problems with 3D graph application redistribution

Hello wireworkers,
i wonder if
someone encountered problems with distribution of application that
uses 3D graph objects. I've created application that uses NI 3D graph
component and created installer with "Enable 3D graph support"
check box enabled. However after installing this application on the
windows machine without Labview two problems appeared: 1) "Error
loading control. A newer version needed. The default settings for the
control will be used." and after it 2) "You have 30 days to
evaluate the Measurement Studio ActivX control..." and something
like that. I don't get it. Why some newer version is required? and
what with that evaluation period?
Have any hints???
Thank you in advance and Merry
Christmas to everyone.
Alex
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easy

Hi Alex,
I tried the process you described on my machine using LabVIEW 7.1 and could not reproduce the behavior. If you can clarify the version you were using that will be helpful. I will have to clean a test machine and try it again without LabVIEW installed, and get back with you if the problem appears. In the meanwhile, I found the following KB which, while not referring to the exact same problem you are describing, does address the evaluation message issue. You can try to follow the steps at the end of the KB, and let me know if that worked.
http://digital.ni.com/public.nsf/websearch/1E1FB3C19E8E0A9986256F8D0077D0E6?OpenDocument
Regards,
Aluma G.
National Instruments

Problem with graphs on repeating frames

Is it possible to use graphs showing correct data within repeating frames?
We experienced problems with graphs within repeating frames, each occurrence of a graph shows the same picture (using data that corresponds to the first frame).
Tnx in advance.

Sounds like the source data for the Graph is the wrong Group.
Dave

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Help In keithley 2400 VI!!(Problem with the data logging and graph plotting)

Hi,need help badly=(.
My program works fine when i run it,and tested it out with a simple diode.The expected start current steps up nicely to the stop current.The only problem is when it ends,i cannot get the data log and the graph,though i already have write code for it.Can someone help me see what's wrong with the code?I've attached the necessary file below,and i'm working with Labview 7.1.
Thanks in advance!!!
Attachments:
24xx Swp-I Meas-V gpib.llb ‏687 KB

Good morning,
Without the instrument it might be hard for others to help
troubleshoot the problem. Was there a
specific LabVIEW programming question you had, are you having problems with the
instrument communication, are there errors?
I’d like to help, but could you provide some more specific information
on what problems you are encountering, and maybe accompany that with a simple
example which demonstrates the behavior?
In general we don’t we will be unable to open specific code and debug,
but I’d be happy to help with specific questions.
I did notice, though, that in your logging VI you have at
least one section of code which appears to not do anything. It could be that a small section of code, or
a wire was removed and the data is not being updated correctly (see pic below). Is your file being opened properly? Is the data being passed to the file
properly? What are some of the things
you have examined so far?
Sorry I could not provide the ‘fix’, but I’m confident that
we can help. Thanks for posting, and
have a great day-
Message Edited by Travis M. on 07-11-2006 08:51 AM
Travis M
LabVIEW R&D
National Instruments
Attachments:
untitled.JPG ‏88 KB

Problem with customization of graph

Similar Messages

Maybe you are looking for