Problem with cvdm-csm-1.1 change default slot in configuration

Hello
I've got problem with this software. On my router 7606 I have install csm on module number 3. After installing software in router I get message No CSM in slot-1. Where can I change configuration this software to get information for slot-3 ?
Thanks for advice.
Marcin

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Similar Messages

HT5622 Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M.

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

Problem with navigation and masthead by changing languages with Anonymous

Hi All,
i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
Ive created two additional users anon_de (with language german )and anon_en (for english).
I've created also two links in the in masthead:
/irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
It seems that masthead and navigation have always prevoius language selected.
Do you know, what could be the reason of that strange behavior?
Thanks for help
Karol

Hi Detlev,
you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
Thanks for help
ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

Problems with the display when I change the view

Hi,
I have recently downloaded th emost up to dat everion of itunes and I have a problem when I change the view. All I get is a black screen down the right hand side where the library details sit. This eventually clears but is **** annoying. It also happened when I had version V7.01 running.
Any ideas?
Thanks,
Fujitsu Siemens MS 6567V2 Windows XP

Helpful AnswerRe: Have anyone problems with the dock? when I start the imac it doesn't appears
27-jun-2011 15:58 (in response to pocoto)
If you run Parallels, this is one of the symptoms of this issue:
http://kb.parallels.com/en/111541
Regards,
Captfred
Like (0) Reply
Captfred post me this page, follow the instrutions on parallels preferences and for me it works. Try it and let us knows if it's works for u too..Regards

Problem with Restricted Recruiter Requisition Status Change Approval Proces

Hello,
Our company is having a problem with Recruiters recieving any approval notifications for requisitions where the status change is performed by someone logged on as a Restricted Recruiter. The approval notification never appears in the Recruiters approval page. The Restricted Recruiter is able to submit the request without any problems.
I was hoping that someone could help point me in the right direction so that I may begin troubleshooting this.
Thanks for your assistance.
Ryan

I have been doing some digging on this matter on E-Recruiting workflow and have discovered transaction SWI2_FREQ (Work Items per Task), very useful. Upon running this utility I found 8 pending approval request tasks. I double clicked on the task to show the workflow status of each task.
I double clicked on one of the request for status change tasks for a requisition which took me to the approval request for status change of Req ########. Here I clicked on the activities tab selected the activities tab, selected the activity Approval request for status change of Requisition ######## then clicked on the execute icon.
Doing this opened up a new web browser and prompted me to login. Using the correct login credentials for this environment I click the login button and promptly recieve the error message...
Error in Web service execution
E:SWF_HTTP:050 TS51807979
At this point I am unsure of where to go...
Any help would be appreciated.
Ryan

SharePoint 2013 Problem with automatic detection of Site language - default language

Hi all,
we have a SiteCollection that was created with 'english' as
default language.
On our SharePoint 2013 environment we have installed the 'german' and 'french' language pack. Both languages are activated as alternative languages on that SiteCollection.
But the automatic language detection is not working properly for us.
Problem description:
User Browser language = German --> Site language = German
If you now change the Browser language to 'Italian' then we would expect that the site will be displayed in 'English' because the 'Italian' language pack is not installed and the SiteCollection default language was set to 'English'...
But the Site will be not displayed in 'English' it will keep the last language in this case 'German'...
Another example: If you change the browser language to 'French' the whole Site is displayed in French. If you try to switch now to 'Italian' then the Site will be still displayed in 'French' instead of 'English'...
Any ideas what could cause this problem?
Regards, Simon

Hi Simon,
Here is the order of the language preference showing to users with different settings
For your issue it may be due to the IE data cache, please clear all the IE data cache, then reopen the IE browser see if it displays the English language as expected.
http://technet.microsoft.com/en-us/library/ff805087.aspx
If the User Profile service application is started on the SharePoint Server 2013 farm, the language preferences stored in the user profile are used. For information about how to add a list of languages to user profile settings in SharePoint Server 2013,
see Add, edit, or delete custom properties in SharePoint Server 2013 user profiles. For information about how to add a list of languages to user profile settings in SharePoint Online Administration Center, see Add and edit user profile properties on Office.com.
If no language preference is defined in the user profile, or if the server uses SharePoint Foundation 2013, the language preferences stored in the user's language settings for the site collection are used.
If no language preference is defined in the user's site collection language settings, the language preferences stored in the user's web browser are used.
If no language preference is defined in the user's web browser, the default site language is used.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Midi/browser playback problem with Audigy 2 platinum (Cannot set Default Device for some reas

Currently I'm having problems playing back mid files in Mediaplayer and various other default programs. I can play midifiles in Winamp by setting it to the proper Directsound device. However in control panel/sound setup (MIDI music Playback), It only lists the MIDI Out Devices instead of the playback one and is defaulted on BLANK when I enter it. I have a feeling this is the main problem.
DX Diag plays back the midi fine. I have tried reinstalling the latest drivers and the drivers from the disc with no luck at all. Also the default language has been stuck on Japanese as well. I have no idea why it started doing this but it seems to also affect any sound playback in my web browsers since I don't even get sound from any Flash files or Google video.Message Edited by zoglog on 06-23-2006 :38 PMMessage Edited by zoglog on 06-23-2006 :38 PM

Ok, well I did a clean sweep and clean reinstall of the drivers that fixed my language problem. However I cannot get the proper "Midi music playback" Default Device. Whenever I change it to something it reverts it to a blank no matter how many times I change it or uncheck "Use only default devices"
It does the exact same thing for "Voice playback"
I'm not sure if this is related but I don't get any sound from any web-browser Shockwave flash files.
This is really starting to get fustrating. Any help input would be greatly appreciated. I think the worst part about this is I know the midi works, it just won't let me assign the device....
Oh yeah, also even if I set the "place volume icon in taskbar" option in the sound and devices properties it wll not show. Not sure if this is related...Message Edited by zoglog on 06-23-2006 :44 PM

[SOLVED]Problem with Realtek HDA and ATI HDMI Default card under ALSA

I have the usual problem about no audio on flash or VLC. I use Realtek HDA as primary sound card but is not detected as the default one. I checked the wikia, and forum post but no fix. After reading some info on a gentoo page, and some in the ALSA wiki I see both of them uses snd_hda_intel, so I cannot blacklist or use "option snd_hda_intel index=0" I've tried also searching on Google, but not luck. Anyone know how to fix it? Thanks!
cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfbdfc000 irq 25
1 [VT82xx ]: HDA-Intel - HDA VIA VT82xx
HDA VIA VT82xx at 0xfbffc000 irq 17
lsmod |grep '^snd'
snd_hda_codec_atihdmi 2095 1
snd_hda_intel 19020 4
snd_seq_dummy 1079 0
snd_pcm_oss 33662 0
snd_seq_oss 25104 0
snd_mixer_oss 14686 1 snd_pcm_oss
snd_seq_midi_event 4496 1 snd_seq_oss
snd_seq 41752 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4369 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec_realtek 193684 1
snd_hda_codec 67274 3 snd_hda_codec_atihdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hwdep 4764 1 snd_hda_codec
snd_pcm 58276 4 snd_hda_intel,snd_pcm_oss,snd_hda_codec
snd_timer 15423 3 snd_seq,snd_pcm
snd_page_alloc 5981 2 snd_hda_intel,snd_pcm
snd 43283 17 snd_hda_intel,snd_pcm_oss,snd_seq_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Madrid"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(snd_hda_codec_realtek snd_seq_oss snd_hda_intel !snd_hda_codec !snd_hda_codec_atihdni radeon fuse !snd_pcsp !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archlinux"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng alsa dbus hal network netfs crond kdm)
Last edited by Shinku (2010-08-27 13:14:06)

I just added a section to the ALSA wiki page that should work perfectly for you: http://wiki.archlinux.org/index.php/Alsa#In_User_Space
Last edited by Odysseus (2010-08-26 20:32:56)

Problem with replacement of index series, change of base year

Hi Experts!
I try to explain my problem in Real Estate.
In Italy from January 2011 the baseline (base year) national index of consumer prices for the entire community (NIC) and national consumer price index for families of workers and employees (CPI) moved from 1995 to 2010.
So, I have to change the base year of index in Rent Adjustment.
I think I have changed the base year from 1995 to 2010.
(Path: Real Estate>Rent Adjustment>Index>Replacement of index series, change of base year)
In table TIVAJINDXCON (previous was empty) now there is this record:
SERIESTO: 08000
BASEYEARTO: 1995
SERIESFROM: 08000
BASEYEARFROM: 2010
CHAINDATE: 31.12.2010
INDEXBASETO: 1,373
But with transaction FOA0 it seems that the rent adjustment still consider 1995 as base year instead of 2010.
I have to set the SAP application as to use 2010 as new base year instead of 1995.
Would you please forward me with any support.
Best regards,
Thank you.
Tania

My question has been answered by SAP.

Problem with Notifications on Create User/ Change User Password

Hello,
I'm having a problem sending emails to users when an account is created in OIM.
I added a notification to the user and user's manager on the Create User task in the Xellerate User process definition but the emails are not being sent.
I know that if I create another task with the purpose of sending emails and invoke it through the response in the Create User task, it will work.
My aim is to avoid adding tasks for something OIM should be able to do OOTB.
I'm also unable to send an email when a password is updated.. I did the same thing as for the Create User and I know the task (Change User Password) is being invoked by looking at the logs but the emails aren't being sent.
Has anyone ran into such problems?
I'm having these problems in the Xellerate User process task.. i've added notifications in other process tasks (mainly approval tasks) and they are working fine.
Thanks in advance

Hi,
I am just confuse with your response.Have you added the "Password Updated" task in xellerate user provisioning process?
Now if you changing password in OIM profile it will trigger "Change User Password" task not the "Password Updated" task and even if you add "Password Updated" task on Xellerate User provisioning task you can't see this task in Resource Details.
Now assume if you added your notification on "Password Updated" task of any resource which user is provisioned to even then when you change oim password it only trigger "Change User Password" task.So try to have your notification on "Change User Password" task.
Please clarify so that I can response correctly.
Regards
Nitesh

Problems with vertical cell borders and the default table style

When laying out tables in Word, I like to use thin horizontal lines (cell borders) and thick-ish white vertical lines. The vertical white cell borders create a subtle negative space that is less cluttered than the typical boxed-in-all-sides style.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
Message was edited by: Steve in Seattle

I must apologizes.
It seems that I didn't understand well the problem.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
NO
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
I checked and here, aftere defining a new default format with vertical lines set to none, this format is used when I cvreate a new table.
But the same with horizontal lines doesn't apply.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (from FRANCE mardi 28 avril 2009 22:31:45)

Have a 1st generation Apple TV, which is not showing as a device in iTunes. Had no problems with Apple TV until I changed from a Windows PC to an iMac. I have changed my IP address, sub mask address and router address in the Apple TV, Can anyone help?

I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask and Router IP address. Since changing I have switched everything of and on again. Can anyone help?

I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference?

Problem with cvdm-csm-1.1 change default slot in configuration

Similar Messages

Maybe you are looking for