Problem with Data recording with EPOS2 24/5 and LabVIEW

Dear community memebers,
I've been trying some examples from EPOS library, and I would like to know how this example works and how data recording works.
Idon'tknowwhatdoestheparameters, thatthereareindecircle, means.
I would like to plot Position, Velocity and Acceleration. Has someone can explain me how does it works? and what is the funcion of the numbers in the cluster?
Thanks.
Best Regards,
Xavi
Solved!
Go to Solution.
Attachments:
EPOSLibrary.llb ‏4870 KB

Hi Xavi,
you should ask Maxon to explain their software. Or read the manuals they provide...
Motors with some logic usually use a register based communication scheme. You write to certain register to set parameters, you read certain registers to know current parameters/values of the motor. Each cluster in that array is describing one of those registers/parameters, like the first one with register address x6064, sub-address x0 and value d4. Those parameters seem to resemble CANopen CiA specifications!
I can't open that VI due to it's LabVIEW version, but probably you will find labels on the input control of that subVI. Read the labels...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it. Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.

Please authorize ADE 3 with same credentials that you used with older version of ADE

I'm having problems with CS2 (mainly illustrator and photoshop

I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
Please Help!

CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
Third party software Illustrator Repair Kit also must be good solution
It has free demo version at:- http://www.illustrator.repair/
Hope this will be helpful.

Apple TV keeps telling me there is a problem with my apple ID and password when I try to connect to home sharing. I have checked and rechecked and re-entered several times with same message.

I just bought an Apple TV and am trying to set it up. I am connected to wireless, is having difficulties setting time and date. When I try to connect to iTunes and sharing. It keeps telling me that there is a problem with my apple ID and password. I have quadruple checked and re-entered and it won't recognise it. What do I do? Dan.

Sounds like it is more an issue of connecting to the internet. Not just the WiFi Some people have reported that performing a power cycle on their Internet router solved this.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

I'm having problems with Flash Videos (Youtube and ESPN)

I have been having this problem for the last couple of days now and it is really annoying. Whenever I watch a flash video like on youtube or espn my computer freezes up and the audio will make a loud buzzing sound. I have attached a video with the post so you can see what happens. I don't have problems with anything else except this. I also get this error no matter what browser I use. I have system restored my PC as far as I can go, and I've ran a ton of scans and driver update checks and nothing seems to work.

merci a tous pour les nombreuses réponse. j'ai dû mal a les lire vue que je ne lit que le français. je vous remercié encore une fois amicalement. Blanchette 2.
Date: Mon, 25 Jul 2011 19:50:19 -0600
From: [email protected]
To: [email protected]
Subject: Re: I'm having problems with Flash Videos (Youtube and ESPN)
What I meant is Hardware Acceleration off (disabled).
>

I have a problem with mi iPad 3 and iCloud.

I have a problem with my iPad 3 and iCloud.
First. When i try to turn on the automatico downloads of apps and music on my ipad ican't. I put on the buttons but they automaticly turn into off.
Second. I have an macbook with iWork and mi iPad has iWork too but i can use iCloud because the documents that i create in the iPad doen't go online.
I did a little research and i think the troubles are because apple didn't associate mi ipad with my apple id, i had retored mi ipad a lot of times and it doen's fix the problem.
What do i can do?
I'm sorry but i'm learning english, so i'm sorry if you have a hard time trying to understand.
Thank you

Hi Omar1510,
If resetting your iPad allows it to charge, but only temporarily, you may want to make sure that you have your data backed up and try restoring the device (you may want to test the charging before reloading your data). You may find the following article helpful:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Regards,
- Brenden

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

Problem with Data recording with EPOS2 24/5 and LabVIEW

Similar Messages

Maybe you are looking for