Problem with Datastore Tier Rate Factors

Hi all,
I have problem with Chargeback Datastore Tiers. I have three different datastore types and
I want to charge them seperately. To do this, I created three datastore tiers and moved that datastores to them.
For all three datastore tiers, I assigned different rate factors For example;
Datastore Tier 1 : 3.00
Datastore Tier 2 : 2.00
Datastore Tier 3 : 1.00
I expect to see different storage costs for VMs but nothing changes.
Then I moved all datastores to the folder ungrouped and assigned rate factors to datastores one by one according to tier structure.
After doing that I have got expected cost reports for some of the VMs but some of the datastores didn't reflect the rate factors to the cost report again.
What can the problem be? Is there any known issue for that?
If you can help me, I will be glad.
Best regards,

Hi,
There should not be an issue. Could you please let us know more details about cost configuration and report generation?
1. What is the duration of the cost configuration? (start time and end time).
2. What is the duration of the report generation?
The rate factors for datstores/tiers store historical changes as well as tier to datstore mappings also store historical changes.. If a datastore is part of a tier for some time, the rate factor of tier will be applicable for the datastore for that time. If its moved out of tier, the specific rate factor set on the datastore will be applicable.
For example, if a datastore is part of tier 1 from time lines t1 and t2.
and its in ungrouped from t2 to t3.
If you generate a report from t1 to t3, tier 1 rate factor is applied for t1 to t2 and datastore rate factor is applied from t2 to t3.
One thing to ensure that is you have not set any rate factors in the chargeback hierarchy for the VM or its ancestors.
The precedence order is
1. if a rate factor is set at VM level in the hierarchy for Storage computing resource, it will be taken.
2. If its not set on the VM, the ancestors are looked from the immediate parent to root of the Chargeback hierarchy.
3. If the both are not set, the datastore or tier rate factor is looked into based on whether datastore is tiered or not.
One more thing is to generate report using a cost model which has usage based billing policy.
Regards,
Hemanth

Similar Messages

Problem with field KONWA-Rate Unit(Currency or Percentage) of table KONP

Hi Gurus,
I m facing problem with field 'KONWA -Rate Unit (Currency or Percentage)' of table KONP. This field is showing Currency and '%' both in table KONP. For some materials its showing currency value and for some its showing '%'. Due to which its creating load problems. My question is how this '%' is coming (means is there any calculation behind that or something else) in table KONP and how can I identify this.
I am sure u will have the answer for this question so Thanks in advance.
Message was edited by:
        Amit Rajput
Message was edited by:
        Amit Rajput
null

Hi,
take the following example: you sell liquor to customers; in your country, when you sell liquor your company is entitled to pay customs and excise fees to governamental authorities.
These excises and duties are a percentage of the retail price. You'll then create such a condition record with this rate so that you calculation schema will post the correct value during the processing of billing documents...
hope this shed light
Olivier.
Message was edited by:
        Olivier Cora

Problem with ATV refresh rates and frame rates

I live in Australia and as such I am subject to PAL, so when I set my ATV up I set it to 720P 50Hz, when I purchased a TV season the episodes were running at 25fps and played back flawlessly with no dropped or added frames. My problem occurs when I download movies, all the movies I have bought are running at 24fps and suffer from quite noticeable jitter, almost like the 24th frame is duplicated and added as the 25th frame, I assume it is something like this as the pause happens every second.
So has anyone had a problem similar to this and if so what do you do about it?
Does the ATV playback all sources (24/25) smoothly even if it has to convert?
Could it be caused by my TV?
Any help to any of these questions would be great.
Thanks.
Tim.

With my particular Apple TV setup and TV combination, I find that setting to 1080p (60hZ) gives my the best all-round round results.
This does result in -slightly- jerky motion with 25fps material (especially old British TV shows), but it's bearable. It's particularly noticeable with sideways scrolling text and credits.
The one thing that is peculiar on my setup is if I use 720p (either @60hz or 50hz) and watch an iTunes-purchased HD episode that is encoded at 24fps I get very odd motion effects indeed. Every few seconds the video appears to speed up almost like it is 'catching up' with lost frames - very hard to explain exactly how it looks. Anyway I set to 1080p and this effect is gone completely. It also goes away if I set to 1080i. I think something queer is going on with 720p on the Apple TV (at least with my TV there is). This happens with both HDMI and component outputs.
It may be worth trying 1080i at either 50 or 60Hz if your set can't do 1080p.
I would also suggest that 60hz in theory should give a smoother motion for 24fps playback than 50Hz.
My basic problem with all this is that on even a cheap DVD player if a disk is 50Hz, the player switches to 50Hz output and if it is 60Hz, it will change to 60Hz. The Apple TV stays fixed. It's a shame it can't autoswitch refresh rates.

Problem with audio sample rate when exporting

I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...that was a nightmare.
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago. Does anybody have an answer?

This problem is addressed by the After Effects CC (12.2.1) bug-fix update, which is now available:
http://adobe.ly/AE_CC_1221
Note the part at the end of that page about a crucial update for the Creative Cloud desktop application, which addresses some severe problems with AME, Premiere Pro, and After Effects.

How to fix a problem with the discharge rate of the battery in the iPhone

Hi I have a question namely how to fix the problem of discharging the battery in the iPhone 4 with ios7.1

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with audio sample rate when capturing DV50

Hello from Spain, I have a problem when capturing DV50 source footage: I setup my sequence settings and capturing settings like always, DV50 codec and 48k sample rate for audio, then when the capturing process finish the result is a file that contains audio to a non-48k audio sample rate, then video and audio don´t match. The sample rate is 47945 and other similars, not always the same, sometimes 47214 sometimes 48000, and there is no rules...My capturing device works ok in other computers and the footage has been capture ok in other Mac...I don´t know what happens.
Sebas, kind regards
G5 Quad Mac OS X (10.4.6)

Hello!, first of all thanks for your reply. Yes, the camera is the same, the problem is on my computer, I have discovered a solution: first I capture the audio, only the audio, and then the video, only the video. After this I soncronize the two separate files on Final Cut timeline. It´s a slow process, but I am really desesperated. I don´t know what happens, I few minutes ago I have captured a 30 mins. video and the sample rate of the audio was 42.145k (???). It´s a crazy thing...

Problems with Sampling rate in LabVIEW with 1/4 bridge strain gage

Hello,
I have a question. I have SCXI 1001 and am trying to read strain gages and thermocouples. In the slot 1 I have a 1122/1322 with thermocouples that works great. In slot 2 I have a 1121/1321 that needs help. I cannot figure out how to make a LabVIEW program to read the strain gage.
Is computer hardware a factor? I have a relatively old Dell, 1.7 ghz, 256 MB RAM, and all of my programs bog my machine down. My thermocouple program with 1 functioning channel takes almost 2 minutes to load.
Anyway, I program the DAQ assistant like I think it should be done, but I am having problems with the sampling rate. Everytime I run the program I get an error message saying that it could not get the recommended samples in time. I have had my delay time on my While Loop as low as .25 s and as high as 1.5 s. I have changed my sampling rate from 1 hz to 1000 hz.
I would really appreciate any and all help on this matter. I am still very new to LabVIEW. <I could not contain my excitement when my thermocouple program worked>
Thanks,
CDawgttu

Hi CDawgttu,
I think the best thing that we can do for the moment is to try and see what the maximum rate you can get on the 1121 is, when working on its own.
According to the DataSheet the 1122 is more likely to be what's slowing you down. There could also be some concerns with how the internal jumpers are set on the 1121, so you may want to make sure that the settings there match how you have configured your board in Measurement and Automation Explorer.
-You can set this up by right clicking on the SCXI module and adjusting the Properties. On the Jumpers Tab you should then make sure the values match what you've set internally (SCXI-1121 User Manual - Chapter 2)-
When you use just the 1121, see if that makes a difference in your overall application speed.
Finally, it may be easier to use an example program than the DAQ Assistant since you are using such an old machine. You can find Strain Gauge examples by opening LabVIEW and following this path:
Help > Find Examples > Browse > Hardware Input and Output > DAQmx > Analog Measurements > Strain > Cont Acq Strain Samples.vi
I hope some of these tips get you pointed down the right path.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

Smaple rate problem with FCP 7

Hi!
I have a problem with the sample rate on FCP 7
After the capture comes this message:
The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
My vide playback preset is Apple FireWirePal and the audio Firewire DV
What can I do for this?

If you look in your camera menus I am certain there is a way to turn on the display that shows the sample rate of your audio. It will say either 12-bit or 16-bit. 12-bit on the camera is 32k, 16-bit is 48k.
As Michael says, if it's not drifting out of sync you don't have a problem in FCP. The only thing is you may have a problem with the camera not recording correctly, which may cause other problems.

Hello, I am have problems with coruption of the photos in a slide show after burning the DVD in iDVD. This coruption does not always appear when you preview the project. I have slowed down the burn rate to 1X and kept the quality to professional.

I am having a great deal of problems with Data coruption in slide shows after I have burned a DVD in iDVD. I have changed burn rate from best to 1X with no difference in the coruption. I have the quality set to professional with no improvement. The size of the project is near 3.95, so it should fit on a single layer burn. Should I use either iMovie to create the slide show or "Photo to Movie"? Also, can anyone comment on how I preserve the highest quality picture resolution with a slide show? If I do use iMovie or Photo to Movie, the file size should exceed the 4.2 size so, will I have to buy new DVD's which are capable to handle the double layer burn and upto 8 GB? What DVD's are recommended? Any preferred brand? Are there problems with burning with double layer? I read on this blog of numerous problems.

DVDs are LOW resolution by today's standards - only about 0.3 megapixels - so there is no way they your images on a TV set will look "High Definition". See Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html for recommendations on image sizes to use. Using larger images won't give you better quality, andf in some cases, will lower you image quality because the Quicktime resizing that occurs isn't the best.

Problem with depreciation area (Incorrect currency exchange rate is used)

Good day to all SDN forumers!
I'm having a problem with one depreciation area that we set up. The reason why we configured this depreciation area is for us to enable to monitor all asset postings in another (group) currency aside from the local currency. We set it up in such a way that the depreciation would not post and would thus only "convert" the asset postings to group currency using the table rates in table TCURR (via OB08).
The problem is despite having defined an exchange rate for the current period, the system still picks up the exchange rate for 01/01/2001 which is incorrect. This affected all reports which displays incorrect values whenever I view the postings using the 2nd depreciation area we set up. Is there a way we can correct this?
I'd really appreciate your comments and suggestions guys. Thanks a lot and more power!

Update:
I created a new depreciation area by copying an existing area and updated some of the configuration. The problem is still there though, since the depreciation area still reflects the <b>incorrect</b> rate (similar to that of the previous depreciation area) whenever I access it using Asset Explorer. What's surprising is that even though I've already set the exchange rate (e.g. USD to EUR) to match that of the asset's capitalization / acquisition date, the posted values still do not reflect what I defined in table TCURR. Instead, it reflects the exchange rate used by the old depreciation area. Help anyone? We are already in a production client and transfer/retirement of all the assets is not an option the client would like to undertake.
Edited by: Patrick on Nov 6, 2008 4:45 AM

ThinkPad Bluetooth with Enhanced Data Rate Software Problem

I'm having a weird issue. I use a X200t tablet with Windows 7 Profession 64-bit.
Apparently my current "ThinkPad Bluetooth with Enhanced Data Rate Software" is Version. 6.2.1.2900.
Thinkvantage System Update wants me to download and install Version 6.2.1.3100.
However, it tries and I get Error 1935 and it rolls back. Now when I start windows I get an alert about BTTray.exe not loading.
Of course I searched this problem, but it seems to be some ancient thing (years old) and I've never had a problem before with any of the Bluetooth updates.
I did notice that in past versions people said when they tried to uninstall the old version and install the new one, it just wiped their hard drive. I don't want to risk that so I thought I'd check here if anyone knew what was going on.
Thanks!

Hi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!!

Problem with Exchange rate field in MBEPOH in 4.7

Hi Experts,
I am working on data transfer of POs from 4.6 to 4.7 using the standard extract program RM06EEEX and then loading it using LSMW.
Problem is with the exchnage rate field(WKURS). Length of this field in MBEPOH is 9 characters in 4.6 and it is 1 character long in 4.7
So the data is getting truncated becuase of this mismatch. Is there any sap note avaliable to correct the field length MBEPOH-WKURS or any other way to pass correct data to the strucure.
Thanks in Advance ,
Harkamal

Hi,
Can you please check the valid date of that exchange rate and the goods receipt posting date?
Check in Purchase order also.
Regards,
Kumar

Problem with EXchange rate field in MBEPOH structure

Hi Experts,
I am working on data transfer of POs from 4.6 to 4.7 using the standard extract program RM06EEEX and then loading it using LSMW.
Problem is with the exchnage rate field(WKURS). Length of this field in MBEPOH is 9 characters in 4.6 and it is 1 character long in 4.7
So the data is getting truncated becuase of this mismatch. Is there any sap note avaliable to correct the field length MBEPOH-WKURS or any other way to pass correct data to the strucure in LSMW.
Thanks in Advance ,
Harkamal

Maybe you can use Idoc PORDCR1 (Create Purchase Order) as import method in LSMW.
Exchange rate field (WKURS) corresponds to field EXCH_RATE in E1BPMEPOHEADER segment.

Problem with exchange rate GBP/EUR

Hi everyone,
I have an issue regarding 2 documents that have been posted the same date (31.05.2011) but with different exchange rates.
The first doc is type ZP, posted with exchange rate GBP/EUR=0,88XXX (entry date: 26.05.2011, T.Code: F110)
The second one is type BK, posted with exchange rate GBP/EUR=0,87XXX (entry date: 01.06.2011, T.Code: FB01)
Both documents use the same exchange rate type EURX.
I checked in OBA7, there is no default value for the field "Exchange rate type for foreign currency docs" in both cases.
Do you have any idea how to solve this problem?
Thanks in advance,
Soumaya

Hi,
If the exchange rate is maintained in OB08 once a month, and in the meanwhile, if you are trying to post any transaction with foreign currency, the system would pick the last available/maintained rate in the table. For Eg: if the rate is maintained upto 30.04.2011 with 0,88XXX and if you have made a document with ZP with posting date as 31.05.11, the system would pick the rate of 30.04.2011 only as there is no rate maintained as on 31.05.11 on the date of transaction. And later, if you would have maintained the exchange rates for the entire month for the individual day of May, and when you processed a document type BK, the system would have picked the actual rate maintained in OB08 as on 31.05.11 ie 0,87XXX. Hence may be the difference.
Please check whether the above was the scenario with you (by referring to the changes option referred by the experts).
Regards
Hari

Usb transfer rate problem with bootcamp

hello
drivers for uEye cameras are only available for windows platforms. so i am running windows xp on the latest mac mini with the latest bootcamp drivers in order to use the camera.
everything works great until i plug in another usb device. the transfer rate of the camera decreases dramatic (1/2). the second usb device is an usb hub with a microcontroller. it consumes only low transfer rates.
this constellation works perfect on other pcs. i can't compare it on os x because no drivers for the camera are available.
are there known issues with usb transfer rates on intel mac minis? firewire cameras and harddrives should suffer similar problems.
greetings
michael

are there known issues with usb transfer rates on
intel mac minis? firewire cameras and harddrives
should suffer similar problems.
Welcome to Apple Discussions!
To address this specific point - no, there are no known issues with USB transfer rates that are common to Macs but not PCs. The weakness of the USB standard is that it is controlled by the host system rather than a dedicated controller, thus transfer rates (on both Mac and PC platforms) are determined by what the system is doing overall. As a result, transfer rates vary quite dramatically. Firewire, on the other hand, has a dedicated controller which ensures that a consistent data rate is achieved, almost regardless of other system activity. That's why you will often see it recommended that FW is used for external drives rather than USB, since while USB will generally provide better burst rates of data transfer, FW will generally provide far better sustained data rates, despite being theoretically slower.
In your situation, I can't help but wonder if the hub you mention is not causing the system some issues. It would not have to be a matter of it causing any significant data transfer itself, but could be the result of the hub's controller forcing the system into activity which then suppresses potential performance from the camera.
One thing is sure: if the camera works well without the hub connected, but degrades in performance with it, the issue is not with the system or the camera, but the hub.

Problem with Datastore Tier Rate Factors

Similar Messages

Maybe you are looking for