Problem with Daylight/Timezone

Hi all, here is the problem. I hava an Ultra 5 with Solaris 7 and a Progress database. I want to deactivate the autommatic changes of daylight and do it manually each time, because it causes problems to my application.
Thank you in advance for your help. Marilena

Hi Marilena,
Follow these steps to change the system time zone:
1. Become superuser
2. Edit the /etc/TIMEZONE file, change the TZ=time-zone variable, and save the
changes. The timezone is reset.
3. Reboot the system.
Here is an example of the /etc/TIMEZONE file for a system set to Pacific
Standard/Pacific Daylight Time. Note that /etc/TIMEZONE is now a symbolic link
to /etc/default/init:
# @(#)init.dfl 1.2 92/11/26
# This file is /etc/default/init. /etc/TIMEZONE is a symlink to this file.
# This file looks like a shell script, but it is not. To maintain
# compatibility with old versions o
f /etc/TIMEZONE, some shell constructs
# (i.e., export commands) are allowed in this file, but are ignored.
# Lines of this file should be of the form VAR=value, where VAR is one of
# TZ, LANG, or any of the LC_* environment variables.
TZ=US/Pacific
Here is an example of how to change the timezone from Pacific to Eastern:
osiris%su
Password:
# vi /etc/TIMEZONE
TZ=US/Eastern
:w!
# reboot
osiris% date
Tue Jul 14 14:24:52 EDT 1999
revert back.
Thanks.
regards,
senthilkumar
SUN - DTS

Similar Messages

  • Calculating time for different timezone, problems with daylight savings?

    Hi all,
    I try to convert my locale time to a different timezone (like a world clock does). This worked until Europe got "summer time". Then my time calculation went wrong. I just paste the following coding to give you a quick reproducable code.
    I did a lot of googleing but nothing found so far. Also search here in the forum didn't help me solving it. So now I created a post on my own.
    The output of the Java programm is the following (without the colored comments). I just entered these comments to show you where the calculation is right and where it goes wrong.
    I have absolutely now idea about where the chase the error. I am only guessing with "daylight savings issue".
    Hopefully anybody has a good idea.
    Thanks in advance
    John
    Europe/London {color:#339966} *(correct calculation!)*{color}
    daylight shift in millis: 3600000
    Is in daylight savings: true
    19.04.2010 11:28:53
    *Europe/Berlin {color:#339966}(correct calculation){color}*
    daylight shift in millis: 3600000
    Is in daylight savings: true
    19.04.2010 12:28:53
    Australia/Sydney{color:#ff0000} (wrong calculation, shoul 1 hour){color}
    daylight shift in millis: 3600000
    Is in daylight savings: false
    *19.04.2010 20:28:53*
    America/New_York {color:#339966}(correct calculation){color}
    daylight shift in millis: 3600000
    Is in daylight savings: true
    19.04.2010 06:28:53
    Asia/Bangkok {color:#ff0000}(wrong calculation, shoud 1 hour){color}
    daylight shift in millis: 0
    Is in daylight savings: false
    19.04.2010 17:28:53
    Asia/Hong_Kong {color:#339966}(correct calculation){color}
    daylight shift in millis: 0
    Is in daylight savings: false
    19.04.2010 18:28:53
    package test.timezone;
    import java.text.DateFormat;
    import java.text.SimpleDateFormat;
    import java.util.Calendar;
    import java.util.GregorianCalendar;
    import java.util.LinkedList;
    import java.util.List;
    import java.util.TimeZone;
    public class TZCalc {
    public static void main(String[] args) {
    List<TimeZone> list = new LinkedList<TimeZone>();
    list.add(TimeZone.getTimeZone("Europe/London"));
    list.add(TimeZone.getTimeZone("Europe/Berlin"));
    list.add(TimeZone.getTimeZone("Australia/Sydney"));
    list.add(TimeZone.getTimeZone("America/New_York"));
    list.add(TimeZone.getTimeZone("Asia/Bangkok"));
    list.add(TimeZone.getTimeZone("Asia/Hong_Kong"));
    for (TimeZone tz : list) {
    Calendar cal = new GregorianCalendar(tz);
    SimpleDateFormat formatter = (SimpleDateFormat) DateFormat
    .getDateTimeInstance(DateFormat.MEDIUM, DateFormat.MEDIUM);
    formatter.setTimeZone(tz);
    System.out.println("\n"  +tz.getID());
    System.out.println("daylight shift in millis: "  tz.getDSTSavings());
    System.out.println("Is in daylight savings: "  tz.inDaylightTime(cal.getTime()));
    System.out.println(formatter.format(cal.getTime()));
    }Edited by: jbegham on Apr 19, 2010 3:46 AM
    Edited by: jbegham on Apr 19, 2010 3:47 AM

    You should not set the time zone on the calendar since you want the calendar based on UTC.
            List<TimeZone> list = new LinkedList<TimeZone>();
            list.add(TimeZone.getTimeZone("Europe/London"));
            list.add(TimeZone.getTimeZone("Europe/Berlin"));
            list.add(TimeZone.getTimeZone("Australia/Sydney"));
            list.add(TimeZone.getTimeZone("America/New_York"));
            list.add(TimeZone.getTimeZone("Asia/Bangkok"));
            list.add(TimeZone.getTimeZone("Asia/Hong_Kong"));
            Calendar cal = new GregorianCalendar(); // Regardless of your timezone this holds the number of milliseconds since 1/1/1970 UTC.
            for (TimeZone tz : list)
                SimpleDateFormat formatter = (SimpleDateFormat) DateFormat.getDateTimeInstance(DateFormat.MEDIUM, DateFormat.MEDIUM);
                formatter.setTimeZone(tz);
                System.out.println("\n" + tz.getID());
                System.out.println("daylight shift in millis: " + tz.getDSTSavings());
                System.out.println("Is in daylight savings: " + tz.inDaylightTime(cal.getTime()));
                System.out.println(formatter.format(cal.getTime()));
            } I have no idea whether or not this then gives the results you expect.

  • Problem with the Timezone settings

    hi We are having a database in the timezone 'Australia/Melbourne' and after the daylight saving is enabled, below are my findings on the server:
    SQL> SELECT SESSIONTIMEZONE FROM DUAL;
    SESSIONTIMEZONE
    +11:00
    SQL> select tz_offset(dbtimezone) from dual;
    TZ_OFFS
    +10:00
    SQL> select to_char(sysdate,'DD/MM/YYYY HH24:MI:SS') from dual;
    TO_CHAR(SYSDATE,'DD
    07/10/2010 22:22:11
    SQL> select
    to_char(sysdate, 'DD/MM/YYYY HH24:MI:SS') as australia_timestamp,
    to_char(from_tz(cast (sysdate as timestamp), 'Australia/Melbourne') at time zone 'UTC', 'DD/MM/YYYY HH24:MI:SS') as utc_timestamp
    from dual;
    2 3 4
    AUSTRALIA_TIMESTAMP UTC_TIMESTAMP
    07/10/2010 22:22:22 07/10/2010 12:22:22
    SQL> !date
    Thu Oct 7 22:22:55 EST 2010
    I checked the clock for this for UTC: at http://www.timeanddate.com/worldclock/ and it was: Thursday, 7 October 2010 at 11:24:21
    My question here is when the diff in the timezones timings is 11:00 hours and even the server time and the sysdate show the same, then why the above queries are returning diff results?
    Is it related to some setting which is wrong or there is something to be modified in the query itself?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Problem with Oracle Timezones

    Hi,
    I am getting some problems while using oracle time zones. The query I am using is as:
    select FROM_TZ(CAST(TO_DATE('10/2/2005 10:22:30','DD/MM/YYYY HH:MI:SS AM') AS TIMESTAMP), 'GMT') at time zone 'Europe/Kiev' AS New_Time from dual;
    It gives me error as :
    ORA-01882: timezone region %s not found
    I checked that v$timezone_names contains entry for Europe/Kiev.
    The query works fine for some values but not for all values from v$timezone_names.
    What can be the reason for this error? Do I need to do any other setting?
    Thanks in advance.

    Hi,
    Thanks Laurent,
    Actually the problem arises when I try to connect to a remote machine. I have Oracle client installed on a machine(SQL*Plus: Release 9.2.0.1.0 ) and with this client I am connecting to a remote machine which has database, client and server installed on it(SQL*Plus: Release 9.2.0.6.0).
    The query works fine when I execute it by logging to the remote machine directly, but fails when I connect to that machine through the Oracle client machine.
    All machines have HP-UX.
    What can be the reason for such behavior?
    Thanks in advance.

  • Problem with calender timezone

    hi first i got the instance of the calendar and printed the date? The date showed in IST which is my timezone. After this i changed the Timzone of the calendar to "UTC" and printed the date. still the date comes in IST and the date is same before and after changing the timezone. how to understand this? why is the time not changing according to the timezone set? why the time is always showing in IST which is my OS timezone?

    murrayb9654 wrote:
    DrClap wrote:
    Date objects don't have timezones. That's how to understand it. If you want to display a Date in a particular timezone then create a SimpleDateFormat and apply that particular timezone to it, then use its format() method to display the Date.hi thank you. Then i am confused with the api. please see the following.
    the following is the api
    java.util.Calendar.setTimeZone(TimeZone value)
    this mean that we can set the timezone to the calender. am i right?Yes.
    if date object does not contain timezone information when i printed it it clearly prints IST . how is it able to that?You printed a string representation of the date which interpreted the date as IST. It's able to do that by computer programming. And after all it has to represent the date in some time zone -- which time zone should it choose if not your system's default time zone?
    Suppose i have date like 22-03-2009 12:30:30 That isn't a date. It could represent a variety of dates, depending on what time zone you use to interpret it.
    when i use dateformat with a particular timezone info how will it convert the date exactly to that time zone when it don't know the timezone of the given date.You aren't paying attention. A Date doesn't have a timezone. It is simply the number of milliseconds since a particular instant of time. That instant of time (I'm recapping the API documentation which you haven't read here) was midnight on 1 January 1970 in UTC. And the SimpleDateFormat object represents that instant, or any number of milliseconds after it, using computer programming. Note that the SimpleDateFormat object will represent that instant differently depending on what timezone you assign to the SimpleDateFormat object. You could write some code to try that yourself.

  • SCEP scheduled scan time problem with daylight-saving time?

    Since the daylight-saving time change from last weekend (1 hour earlier) we see that a large group of SCEP clients start their scheduled scan at 11:00 where we have it set in the policy in SCCM2012 at 12:00.
    Most workstations still begin their scan at 12:00.
    Any idea?
    Regards, Bob

    I’m cleaning up old post, did you figure this out yet, if so what was the solution?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Date problem with IST(+5:30) timezone

    Hi,
    I'm having problem with Timezone IST, which is GMT + 05:30.
    SimpleDateFormat returns incorrect date when timezone on client machine is other than IST.
    When Timezone on machine is IST, correct value is returned.
    See the below example. All four dates are same ( LKT is also + 05:30).
    When timezone on machine is IST, all four dates are displayed same.
    For any other timezone, IST date is displayed incorrectly, rest 3 are displayed correctly.
    import java.text.ParseException;
    import java.text.SimpleDateFormat;
    import java.util.Date;
    public class Test {
        public static void main(String[] args) throws ParseException {
            SimpleDateFormat simpleDateFormat = new SimpleDateFormat("EEE MMM d HH:mm:ss Z yyyy");
            Date date1 = simpleDateFormat.parse("Wed Sep 02 02:17:41 +0530 2009");
            Date date2 = simpleDateFormat.parse("Wed Sep 02 02:17:41 IST 2009");
            Date date3 = simpleDateFormat.parse("Tue Sep 01 13:47:41 PDT 2009");
            Date date4 = simpleDateFormat.parse("Wed Sep 02 02:17:41 LKT 2009");
            System.out.println(date1.toString());
            System.out.println(date2.toString());
            System.out.println(date3.toString());
            System.out.println(date4.toString());
            System.out.println("Date1 equals Date2? " + date1.equals(date2));
            System.out.println("Date1 equals Date3? " + date1.equals(date3));
            System.out.println("Date1 equals Date4? " + date1.equals(date4));
            System.out.println("Date1.getTime() " + date1.getTime());
            System.out.println("Date2.getTime() " + date2.getTime());
            System.out.println("Date3.getTime() " + date3.getTime());
            System.out.println("Date4.getTime() " + date4.getTime());
    Output when timezone on client is GMT IST (GMT + 05:30):
    Wed Sep 02 02:17:41 IST 2009
    Wed Sep 02 02:17:41 IST 2009
    Wed Sep 02 02:17:41 IST 2009
    Wed Sep 02 02:17:41 IST 2009
    Date1 equals Date2? true
    Date1 equals Date3? true
    Date1 equals Date4? true
    Date1.getTime() 1251838061000
    Date2.getTime() 1251838061000
    Date3.getTime() 1251838061000
    Date4.getTime() 1251838061000
    Output when timezone on client is GMT (Casablanca):
    Tue Sep 01 15:47:41 ACT 2009
    Tue Sep 01 19:17:41 ACT 2009
    Tue Sep 01 15:47:41 ACT 2009
    Tue Sep 01 15:47:41 ACT 2009
    Date1 equals Date2? false
    Date1 equals Date3? true
    Date1 equals Date4? true
    Date1.getTime() 1251838061000
    Date2.getTime() 1251850661000
    Date3.getTime() 1251838061000
    Date4.getTime() 1251838061000
    Output when timezone on client is PDT ( -0800, -0700 for this date due due Daylight saving):
    Tue Sep 01 13:47:41 PDT 2009
    Tue Sep 01 17:17:41 PDT 2009
    Tue Sep 01 13:47:41 PDT 2009
    Tue Sep 01 13:47:41 PDT 2009
    Date1 equals Date2? false
    Date1 equals Date3? true
    Date1 equals Date4? true
    Date1.getTime() 1251838061000
    Date2.getTime() 1251850661000
    Date3.getTime() 1251838061000
    Date4.getTime() 1251838061000
    IS this a bug in java??
    Regards

    Your program is in error. PDT and LKT are not valid time zone ids in Java. There may be other problems, also, I didn't check.
    I know this program produces valid results, you can try it
    import java.text.DateFormat;
    import java.util.Date;
    import java.util.TimeZone;
    public class DateTest
        public static void main(String[] args)
            Date current = new Date();
            DateFormat df =
                DateFormat.getDateTimeInstance(DateFormat.MEDIUM, DateFormat.FULL);
            System.out.println("Default TZ: " + df.format(current));
            df.setTimeZone(TimeZone.getTimeZone("IST"));
            System.out.println(df.format(current));
            df.setTimeZone(TimeZone.getTimeZone("GMT"));
            System.out.println(df.format(current));
            df.setTimeZone(TimeZone.getTimeZone("Etc/GMT-5"));
            System.out.println(df.format(current));
    }This program lists all of Java's time zones
    import java.util.*;
    public class TimezoneList
        public static void main(String[] args)
            int msPerHr = 3600 * 1000;
            String[] ids = TimeZone.getAvailableIDs();
            for (int n = 0; n < ids.length; n++)
                TimeZone tz = TimeZone.getTimeZone(ids[n]);
                System.out.print(
                    "TZ: " + ids[n] + "  " + (double) tz.getRawOffset() / msPerHr + "  ");
                System.out.println(
                    tz.useDaylightTime() ? "DST=" + (double) tz.getDSTSavings() / msPerHr : "");
    }

  • Problems with the Pacific/Auckland timezone

    I have a problem with the Pacific/Auckland timezone.
    I have a client in New Zealand using Java on a Windows XP computer with the Auckland, Wellington Windows timezone. Around March 30th he had one hour dis-alignment in the Java time and the Windows time, this went on for some days until after the timezone switched Daylight Saving Time (DST) off April 4th.
    I have tested it with the small program below and will have the problem again from September 27th to October 3th (New Zealand turn DST on September 26th). It seams to be a problem only for the Pacific/Auckland timezone as when I use other timezones the problem does not occur. Is this a bug in Java or do I do something wrong?
    Note: I tested using the JRE 1.6.0_20
    import java.util.GregorianCalendar;
    import java.util.Calendar;
    import java.util.TimeZone;
    public class ShowDate {
         public static void main(String args[]) {
              Calendar cal = new GregorianCalendar();
              String str = cal.toString();
              String data[] = str.split(",");
              for (int i=0; i<data.length; i++) {
                   System.out.println(data);

    The problem was not connected to Java but a missing update of the Windows system

  • Problem with date and timezone

    Hello,
    I am encountering a problem with the command new java.util.date() on a hpux 11 machine.
    The "date" from command line returns:
    Tue Oct 26 18:02:02 MEST 2004
    And the date from java returns:
    Tue Oct 26 17:02:02 GMT+01:00 2004
    It is as if the JVM was running on another timezone than the machine. The only change we made is an upgrade from java 1.2.2.04 to 1.2.2.17. Our old java program running since 2000 hasn't changed nor the others environment files.
    Does anyone has an explaination? Javadoc for jav.util.date does not speaks of timezone.
    Thanks in advance,
    Valere

    I have tried, it is the same pb with java 1.4.
    How to set the default timezone for a JVM?
    Concerning the patch, we have several others worksations running well with 1.2.2.04 (except a small display bug that i wanted to correct by upgrading the JVM). To my knowledge, this patch is not installed on any of them.
    Another way to investigate, it seems that the java version installed on the others stations refers to java 3D. What is it? It has a different architecture than standard jre, but java -version seems exactly the same (except the version number itself).
    Mayday, mayday!

  • Timezone problem with Desktop 6.2 calandar and outlook 2007 after HotSync

    After recently being upgraded to Desktop 6.2 I have a problem with Hotsync Palm-calendar and outlook 2007.
    When I create a new appointment in outlook 2007 and next do a HotSync it is stored in PalmTungsten-E2 calendar with a timezone CEST (=2 hours earlier than it should be).
    At least I won't be late for these appointments, but its a bit annoying.
    I already tapped and untapped the box -New events use time zones- in the Calendar Preferences, but that does not help.
    Louis
    Post relates to: Tungsten E2
    This question was solved.
    View Solution.

    Thanks Colapop for you suggestion.
    I had already tried that option and it gave no good result.
    Yesterday I bought KeySuite from Chapure and now everything works fine again.
    I do regret a bit I upgraded to PalmDesktop 6.2 because that was the start of my problems. The reason for updating to 6,2 was that I wanted to make use of outlook 2007 instead of palmCalender.
    Cheers
    LouisK100

  • UCCX 7 outbound dialing, problem with area codes

    Hello all,
    I'm just testing the outbound dialing feature in a lab, and have run into the following problem:
    I have following:
    outbound configuration:
    general:
    Customer dialing time: start (9:00) end (21:00)
    dialing prefix - 9
    international prefix - 00
    Local Area Code: 44
    Area Codes:
    44 -> Europe/London
    34 -> Europe/Madrid
    86 -> GMT-10 (for testing purposes, does not correspond to real China time).
    Then, I upload a .CSV file into a campaign with the following information:
    Jane,Smith,00447111113007
    Jacky,Chan,0086611115002
    Juan,Pablo,0034611114001
    The dialing works, the agent receives the call, accepts it, and then the call is made.
    if anyone is interested, although it has nothing to do with the question itself, the calls are translated to other extension on CUCM to be able to make a call.
    The problem is that, they are all treated as in the same AREA CODE, although I have clearly defined area codes for each of those countries.
    when the call appears it shows on the CAD as BAAreaCode: +00060
    Therefore the calls are made through to China even when it's midnight there!!!???
    I know I must be doing something wrong, but I don't know what?
    Many thanks for your help,
    Cheers,

    Hi Aaron,
    Sorry for being so late to answer you. But I've done quite a few tests last weekend and have couple traces as well.
    Apparently, the first time I added area codes, I did something incorrect, although I do not know what exactly, because now I've added area codes and it partially worked.
    Area code: 4420 - Europe/London with Daylight saving
    Area code: 3498 - Europe/Madrid with Daylight saving
    Area code: 8661 - GMT/+7 NO Daylight saving
    The first two Area codes (Spain and London) were correctly identified, In traces I could even see:
    this one is for Spain:
    type=com.cisco.executor.QueuedExecutor,Thread=MIVR_CFG_MGR_INVOKE_NOTIFICATION-33-189,Thread priority=7,Original Thread=null,Original thread priority=5,Time=null,Exception=null 358035:
    Jul 03 10:56:40.390 BST %MIVR-CFG_MGR-7-UNK:configStubImpl-replace() notified with DialingListConfig,time=2010-07-03 10:56:40.373,recordId=0,impl=class com.cisco.crs.outbound.DialingListConfig,desc=,key[137],columns[137,1,,Jacky,Chan,0086611115002,,,377,0,424,1,424,1,,1278150825843,6,0,0,0,0,0,0,0,0] 358036:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 358037:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:138 358038:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0034981114001 0034981114001 358039:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 358040:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:numToDial=0034981114001 0034981114001 358041:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:138 358042:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Europe/Madrid",offset=3600000,dstSavings=3600000,useDaylight=true,transitions=165,lastRule=java.util.SimpleTimeZone[id=Europe/Madrid,offset=3600000,dstSavings=3600000,useDaylight=true,startYear=0,startMode=2,startMonth=2,startDay=-1,startDayOfWeek=1,startTime=3600000,startTimeMode=2,endMode=2,endMonth=9,endDay=-1,endDayOfWeek=1,endTime=3600000,endTimeMode=2]] 358043:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=true 358044:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=716 globalStartTime=480 globalEndTime=1410 358045:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 358046:
    Jul 03 10:56:40.390 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: no more in-memory contacts left for campaignID 1 358047:
    As we can see, localTimeMins is 716 which is: 11:56AM.  That was correct time, and in between min/max globalstart times.
    And this one is for London:
    getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 276065:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:130 276066:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=00442081114002 276067:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 276068:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:numToDial=00442081114002 276069:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:130 276070:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Europe/London",offset=0,dstSavings=3600000,useDaylight=true,transitions=242,lastRule=java.util.SimpleTimeZone[id=Europe/London,offset=0,dstSavings=3600000,useDaylight=true,startYear=0,startMode=2,startMonth=2,startDay=-1,startDayOfWeek=1,startTime=3600000,startTimeMode=2,endMode=2,endMonth=9,endDay=-1,endDayOfWeek=1,endTime=3600000,endTimeMode=2]] 276071:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=true 276072:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=627 globalStartTime=480 globalEndTime=1410 276073:
    Jul 03 10:27:41.687 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 276074:
    As we see, localTimeMins is 627 which is: 10:27AM which is correctly between min/max globalstart times too.
    But the problem started with GMT+7.
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: for campaignID=1 280255:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: campaignID=1;#of DLC=2 280256:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 280257:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:131 280258:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0086611115002 280259:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 280260:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:numToDial=0086611115002 280261:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:131 280262:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Etc/GMT+7",offset=-25200000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null] 280263:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=false 280264:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=148 globalStartTime=480 globalEndTime=1410 280265:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=false 280266:
    Jul 03 10:28:41.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: cannot dial at this time, will be marked RETRY
    It correctly identifies Etc/GMT+7 but then it calculates the localtime wrongly... It came up with 148 which is 2:28AM... and the time I was making a call GMT+0 time was around 9:28AM so GMT+7 should've been 4:28PM...
    Then I tried GMT-7 too:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: for campaignID=1 433346:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: campaignID=1;#of DLC=2 433347:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getPhoneNumber: callStatus=2callResult=0lastNumDialed=0 433348:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:140 433349:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: phoneNum=0086611115002 433350:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getFormattedPhoneNumber: intPrefix=00 localAreaCode=004420 lenAreaCode=6 include lac=true 433351:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:numToDial=0086611115002 433352:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:CMgrUtil: getUnformattedPhoneNumber: dlcID:140 433353:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:OutboundContactInfo:isRequestingContacts() for CSQ 2 returns true 433354:
    Jul 03 11:25:40.843 BST %MIVR-SS_OB-7-UNK:OutboundContactInfo:setNrGetContactsReqSent() for CSQ 2 to 1 433355:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:OutboundContactsRequestor before sleep 433356:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:Dialer:printLicenses() working_resources for CSQ:2 is 0 433357:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:Dialer:printLicenses() total_working_resources:0, OB_contacts_in_progress:0 433358:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: timezone=sun.util.calendar.ZoneInfo[id="Etc/GMT-7",offset=25200000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null] 433359:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: DST observed=false 433360:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: localTimeMins=1045 globalStartTime=480 globalEndTime=1410 433361:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CMgrUtil: isValidLocalTime: isValidTime=true 433362:
    Jul 03 11:25:40.859 BST %MIVR-SS_OB-7-UNK:CampaignMgr.getContactsFromMemory: remaining # of in-memory contacts for campaignID 1:1 433363:
    and this time it did all the way around, instead of early morning, it was 1045: 5:25PM...
    I do not understand what am I doing bad... but I'm starting to think it's some kind of a bug...
    and the other problem is: outbound dialer does not even take contacts out of the campaign for calling if the server's local time is not between global start time and global end time. which should not be the case, as I understand campaign times should be applied to area code local time not to server local time.
    Many thanks to all,
    Cheers,
    George

  • Having Problems With The Neo2 ? Read This!!!!

    Hi,
    i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
    In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
    But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
    I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
    I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
    Well, having probs with you're NEO2 ??
    remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
    First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
    Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
    Regards,
    Welcome to the real world NEO :D

    Ok.....
    i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
    Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
    Whatever i do, i can't make the mobo crash in anything but games!
    Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2003-10-04 02:02:53
    TimeZone: -60 - West-Europa (standaardtijd)
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 9
    Shutdown: 0
    EaRecovery: 1
    EventCount: 2
    BreakCount: 2
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: ati2dvag
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: RADEON 9700 PRO
    HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
    Manufacturer: ATI Technologies Inc.
    DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: ATI Technologies Inc.
    DriverFileDescription: ATI Radeon WindowsNT Display Driver
    DriverFileVersion: 6.14.10.6378
    DriverInternalName: ati2dvag.dll
    DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
    DriverOriginalFilename: ati2dvag.dll
    DriverProductName: ATI Radeon Family
    DriverProductVersion: 5.2.3790.2
    I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
    Regards,
    The real world

  • I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .

    HI All,
    I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
    Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
    The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
    here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
    show run-config
    Press Enter to continue...
    System Inventory
    NAME: "Chassis"   , DESCR: "Cisco 5500 Series Wireless LAN Controller"
    PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
    Burned-in MAC Address............................ 30:E4:DB:1B:99:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 12
    Press Enter to continue or <ctrl-z> to abort
    System Information
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.0.235.0
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
    Build Type....................................... DATA + WPS
    System Name...................................... WLAN Controller 5508
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    IP Address....................................... 10.125.18.15
    Last Reset....................................... Software reset
    System Up Time................................... 41 days 5 hrs 14 mins 42 secs
    System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
    Current Boot License Level....................... base
    Current Boot License Type........................ Permanent
    Next Boot License Level.......................... base
    Next Boot License Type........................... Permanent
    Configured Country............................... US - United States
    --More or (q)uit current module or <ctrl-z> to abort
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +36 C
    External Temperature............................. +20 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 10
    Number of Active Clients......................... 61
    Burned-in MAC Address............................ 30:E4:DB:1B:99:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 12
    Press Enter to continue or <ctrl-z> to abort
    AP Bundle Information
    Primary AP Image  Size
    ap3g1             5804
    ap801             5192
    ap802             5232
    c1100             3096
    c1130             4972
    c1140             4992
    c1200             3364
    c1240             4812
    c1250             5512
    c1310             3136
    c1520             6412
    c3201             4324
    c602i             3716
    Secondary AP Image      Size
    ap801             4964
    c1100             3036
    --More or (q)uit current module or <ctrl-z> to abort
    c1130             4884
    c1140             4492
    c1200             3316
    c1240             4712
    c1250             5064
    c1310             3084
    c1520             5244
    c3201             4264
    Press Enter to continue or <ctrl-z> to abort
    Switch Configuration
    802.3x Flow Control Mode......................... Disable
    FIPS prerequisite features....................... Disabled
    secret obfuscation............................... Enabled
    Strong Password Check Features:
           case-check ...........Enabled
           consecutive-check ....Enabled
           default-check .......Enabled
           username-check ......Enabled
    Press Enter to continue or <ctrl-z> to abort
    Network Information
    RF-Network Name............................. OGR
    Web Mode.................................... Disable
    Secure Web Mode............................. Enable
    Secure Web Mode Cipher-Option High.......... Disable
    Secure Web Mode Cipher-Option SSLv2......... Enable
    OCSP........................................ Disabled
    OCSP responder URL..........................
    Secure Shell (ssh).......................... Enable
    Telnet...................................... Disable
    Ethernet Multicast Forwarding............... Disable
    Ethernet Broadcast Forwarding............... Disable
    AP Multicast/Broadcast Mode................. Unicast
    IGMP snooping............................... Disabled
    IGMP timeout................................ 60 seconds
    IGMP Query Interval......................... 20 seconds
    User Idle Timeout........................... 300 seconds
    ARP Idle Timeout............................ 300 seconds
    Cisco AP Default Master..................... Enabled
    AP Join Priority............................ Disable
    Mgmt Via Wireless Interface................. Disable
    Mgmt Via Dynamic Interface.................. Disable
    --More or (q)uit current module or <ctrl-z> to abort
    Bridge MAC filter Config.................... Enable
    Bridge Security Mode........................ EAP
    Mesh Full Sector DFS........................ Enable
    AP Fallback ................................ Enable
    Web Auth Redirect Ports .................... 80
    Web Auth Proxy Redirect ................... Disable
    Fast SSID Change ........................... Enabled
    AP Discovery - NAT IP Only ................. Enabled
    IP/MAC Addr Binding Check .................. Enabled
    Press Enter to continue or <ctrl-z> to abort
    Port Summary
               STP   Admin   Physical   Physical   Link   Link
    Pr Type   Stat   Mode     Mode     Status   Status Trap    POE   SFPType  
    1 Normal Forw Enable Auto       1000 Full Up     Enable N/A     1000BaseTX
    2 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    3 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    4 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    5 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    6 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    7 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    8 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    Press Enter to continue or <ctrl-z> to abort
    AP Summary
    Number of APs.................................... 8
    Global AP User Name.............................. Not Configured
    Global AP Dot1x User Name........................ Not Configured
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    KNOWLOGY_DC01       2     AIR-LAP1131AG-A-K9   00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1       US       1
    KNOWLOGY_DC02       2     AIR-LAP1131AG-A-K9   00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1       US       1
    KN1252_AP01         2     AIR-LAP1252AG-A-K9   00:21:d8:ef:06:50 Knowlogy Confere 1       US       1
    KN1252_AP02         2     AIR-LAP1252AG-A-K9   00:22:55:8e:2e:d4 Server Room Side 1       US       1
    Anham_AP03           2     AIR-LAP1142N-A-K9     70:81:05:88:15:b5 default location 1       US       1
    ANHAM_AP01          2     AIR-LAP1142N-A-K9     70:81:05:b0:e4:62 Small Conference 1       US       1
    ANHAM_AP04           2     AIR-LAP1131AG-A-K9   00:1d:45:86:e1:b8   Conference room 1       US       1
    ANHAM_AP02           2     AIR-LAP1142N-A-K9     70:81:05:96:7a:49         Copy Room 1       US       1
    AP Tcp-Mss-Adjust Info
    AP Name             TCP State MSS Size
    KNOWLOGY_DC01       disabled   -
    KNOWLOGY_DC02       disabled   -
    --More or (q)uit current module or <ctrl-z> to abort
    KN1252_AP01         disabled   -
    KN1252_AP02         disabled   -
    Anham_AP03           disabled   -
    ANHAM_AP01           disabled   -
    ANHAM_AP04           disabled   -
    ANHAM_AP02           disabled   -
    Press Enter to continue or <ctrl-z> to abort
    AP Location
    Total Number of AP Groups........................ 3  
    Site Name........................................ ANHAM8075
    Site Description................................. ANHAM 8075 Location
    WLAN ID         Interface         Network Admission Control         Radio Policy
    1               knowlogy_ogr         Disabled                         None
    6               knowlogy_ogr         Disabled                         None
    9               knowlogy_ogr         Disabled                         None
    7               knowlogy_ogr         Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    Anham_AP03           2     AIR-LAP1142N-A-K9   70:81:05:88:15:b5 default location 1     US       1
    ANHAM_AP01           2     AIR-LAP1142N-A-K9   70:81:05:b0:e4:62 Small Conference 1     US       1
    ANHAM_AP04           2     AIR-LAP1131AG-A-K9   00:1d:45:86:e1:b8   Conference room 1     US       1
    ANHAM_AP02           2     AIR-LAP1142N-A-K9   70:81:05:96:7a:49         Copy Room 1     US       1
    Site Name........................................ Knowlogy_DC
    --More or (q)uit current module or <ctrl-z> to abort
    Site Description................................. DC Center Access points
    WLAN ID         Interface         Network Admission Control         Radio Policy
    2               knowlogy_ogr         Disabled                         None
    4               knowlogy_ogr         Disabled                         None
    3               knowlogy_ogr         Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    KNOWLOGY_DC01       2     AIR-LAP1131AG-A-K9   00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1     US       1
    KNOWLOGY_DC02       2     AIR-LAP1131AG-A-K9   00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1     US       1
    Site Name........................................ OGR
    Site Description................................. 1934 OGR Office
    WLAN ID         Interface         Network Admission Control         Radio Policy
    1               knowlogy_ogr         Disabled                         None
    2               knowlogy_ogr         Disabled                        None
    4               knowlogy_ogr         Disabled                         None
    6               knowlogy_ogr         Disabled                         None
    --More or (q)uit current module or <ctrl-z> to abort
    7               knowlogy_ogr        Disabled                         None
    9               knowlogy_ogr         Disabled                         None
    8               knowlogy_ogr         Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    KN1252_AP01         2     AIR-LAP1252AG-A-K9   00:21:d8:ef:06:50 Knowlogy Confere 1    US       1
    KN1252_AP02         2     AIR-LAP1252AG-A-K9   00:22:55:8e:2e:d4 Server Room Side 1     US       1
    Site Name........................................ default-group
    Site Description................................. <none>
    WLAN ID        Interface         Network Admission Control         Radio Policy
    1               knowlogy_ogr         Disabled                         None
    2               knowlogy_ogr         Disabled                         None
    3               knowlogy_ogr         Disabled                         None
    4               knowlogy_ogr         Disabled                         None
    5               knowlogy_ogr         Disabled                         None
    6               knowlogy_ogr         Disabled                         None
    7               knowlogy_ogr         Disabled                         None
    8               knowlogy_ogr         Disabled                          None
    --More or (q)uit current module or <ctrl-z> to abort
    9               knowlogy_ogr         Disabled                         None
    10             management           Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    Press Enter to continue or <ctrl-z> to abort
    AP Config
    Cisco AP Identifier.............................. 6
    Cisco AP Name.................................... KNOWLOGY_DC01
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:86:ed:4e
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.100
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................ wireless.knowlogy.com
    Primary Cisco Switch IP Address.................. 10.125.18.15
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    --More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    --More or (q)uit current module or <ctrl-z> to abort
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1134T0QG
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    AP Up Time....................................... 48 days, 20 h 19 m 18 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:33 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 47 s
    --More or (q)uit current module or <ctrl-z> to abort
    Attributes for Slot 0
        Radio Type................................... RADIO_TYPE_80211b
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:1d:71:09:8f:90
         Operation Rate Set
           1000 Kilo Bits........................... MANDATORY
           2000 Kilo Bits........................... MANDATORY
           5500 Kilo Bits........................... MANDATORY
           11000 Kilo Bits.......................... MANDATORY
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
    --More or (q)uit current module or <ctrl-z> to abort
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
        Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 1
         Number Of Channels ........................ 11
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
       Tx Power
         Num Of Supported Power Levels ............. 8
         Tx Power Level 1 .......................... 20 dBm
         Tx Power Level 2 .......................... 17 dBm
         Tx Power Level 3 .......................... 14 dBm
         Tx Power Level 4 .......................... 11 dBm
         Tx Power Level 5 .......................... 8 dBm
         Tx Power Level 6 .......................... 5 dBm
         Tx Power Level 7 .......................... 2 dBm
         Tx Power Level 8 .......................... -1 dBm
    --More or (q)uit current module or <ctrl-z> to abort
         Tx Power Configuration .................... AUTOMATIC
         Current Tx Power Level .................... 1
       Phy DSSS parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 11
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
         Current CCA Mode .......................... 0
         ED Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
         Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
         Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 12 dB
    --More or (q)uit current module or <ctrl-z> to abort
         Coverage exception level................... 25 %
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Cisco AP Identifier.............................. 6
    Cisco AP Name.................................... KNOWLOGY_DC01
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:86:ed:4e
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.100
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    --More or (q)uit current module or <ctrl-z> to abort
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................ wireless.knowlogy.com
    Primary Cisco Switch Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    --More or (q)uit current module or <ctrl-z> to abort
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1134T0QG
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    --More or (q)uit current module or <ctrl-z> to abort
    AP Up Time....................................... 48 days, 20 h 19 m 18 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:33 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 47 s
    Attributes for Slot 1
       Radio Type................................... RADIO_TYPE_80211a
       Radio Subband................................ RADIO_SUBBAND_ALL
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
          CFP MaxDuration ........................... 60
         BSSID ..................................... 00:1d:71:09:8f:90
         Operation Rate Set
           6000 Kilo Bits........................... MANDATORY
    --More or (q)uit current module or <ctrl-z> to abort
           9000 Kilo Bits........................... SUPPORTED
           12000 Kilo Bits.......................... MANDATORY
           18000 Kilo Bits.......................... SUPPORTED
           24000 Kilo Bits.......................... MANDATORY
          36000 Kilo Bits.......................... SUPPORTED
           48000 Kilo Bits.......................... SUPPORTED
           54000 Kilo Bits.......................... SUPPORTED
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 36
         Number Of Channels ........................ 20
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
    --More or (q)uit current module or <ctrl-z> to abort
       Tx Power
         Num Of Supported Power Levels ............. 7
         Tx Power Level 1 .......................... 15 dBm
         Tx Power Level 2 .......................... 14 dBm
         Tx Power Level 3 .......................... 11 dBm
         Tx Power Level 4 .......................... 8 dBm
         Tx Power Level 5 .......................... 5 dBm
         Tx Power Level 6 .......................... 2 dBm
         Tx Power Level 7 .......................... -1 dBm
         Tx Power Configuration .................... AUTOMATIC
         Current Tx Power Level .................... 1
       Phy OFDM parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 44
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
           ......................................... 104,108,112,116,132,136,140,
           ......................................... 149,153,157,161
         TI Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
    --More or (q)uit current module or <ctrl-z> to abort
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
         Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 16 dB
         Coverage exception level................... 25 %
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Press Enter to continue or <ctrl-z> to abort
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... KNOWLOGY_DC02
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:21:d8:36:c5:c4
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.101
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    --More or (q)uit current module or <ctrl-z> to abort
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W  Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Enabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    Reset Button..................................... Enabled
    --More or (q)uit current module or <ctrl-z> to abort
    AP Serial Number................................. FTX1230T24F
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    AP Up Time....................................... 48 days, 20 h 24 m 41 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:35 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 48 s
    --More or (q)uit current module or <ctrl-z> to abort
    Attributes for Slot 0
       Radio Type................................... RADIO_TYPE_80211b
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
        Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:22:55:a5:0c:30
         Operation Rate Set
           1000 Kilo Bits........................... MANDATORY
           2000 Kilo Bits........................... MANDATORY
           5500 Kilo Bits........................... MANDATORY
           11000 Kilo Bits.......................... MANDATORY
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
    --More or (q)uit current module or <ctrl-z> to abort
         Country String ............................ US
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 1
         Number Of Channels ........................ 11
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
       Tx Power
         Num Of Supported Power Levels ............. 8
         Tx Power Level 1 .......................... 20 dBm
         Tx Power Level 2 .......................... 17 dBm
         Tx Power Level 3 .......................... 14 dBm
         Tx Power Level 4 .......................... 11 dBm
         Tx Power Level 5 .......................... 8 dBm
         Tx Power Level 6 .......................... 5 dBm
         Tx Power Level 7 .......................... 2 dBm
         Tx Power Level 8 .......................... -1 dBm
         Tx Power Configuration .................... AUTOMATIC
    --More or (q)uit current module or <ctrl-z> to abort
         Current Tx Power Level .................... 1
       Phy DSSS parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 1
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
         Current CCA Mode .......................... 0
         ED Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
         Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
         Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 12 dB
         Coverage exception level................... 25 %
    --More or (q)uit current module or <ctrl-z> to abort
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... KNOWLOGY_DC02
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:21:d8:36:c5:c4
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.101
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    --More or (q)uit current module or <ctrl-z> to abort
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Enabled
    PoE Power Injector MAC Addr...................... Disabled
    --More or (q)uit current module or <ctrl-z> to abort
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1230T24F
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    --More or (q)uit current module or <ctrl-z> to abort
    AP Up Time....................................... 48 days, 20 h 24 m 41 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:35 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 48 s
    Attributes for Slot 1
       Radio Type................................... RADIO_TYPE_80211a
       Radio Subband................................ RADIO_SUBBAND_ALL
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:22:55:a5:0c:30
         Operation Rate Set
           6000 Kilo Bits........................... MANDATORY
    --More or (q)uit current module or <ctrl-z> to abort
           9000 Kilo Bits........................... SUPPORTED
           12000 Kilo Bits.......................... MANDATORY
           18000 Kilo Bits.......................... SUPPORTED
           24000 Kilo Bits.......................... MANDATORY
           36000 Kilo Bits.......................... SUPPORTED
           48000 Kilo Bits.......................... SUPPORTED
           54000 Kilo Bits.......................... SUPPORTED
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 36
         Number Of Channels ........................ 20
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
    --More or (q)uit current module or <ctrl-z> to abort
       Tx Power
         Num Of Supported Power Levels ............. 7
         Tx Power Level 1 .......................... 15 dBm
        Tx Power Level 2 .......................... 14 dBm
         Tx Power Level 3 .......................... 11 dBm
         Tx Power Level 4 .......................... 8 dBm
         Tx Power Level 5 .......................... 5 dBm
         Tx Power Level 6 .......................... 2 dBm
         Tx Power Level 7 .......................... -1 dBm
         Tx Power Configuration .................... AUTOMATIC
         Current Tx Power Level .................... 1
       Phy OFDM parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 36
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
           ......................................... 104,108,112,116,132,136,140,
           ......................................... 149,153,157,161
         TI Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
    --More or (q)uit current module or <ctrl-z> to abort
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
          Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
         Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 16 dB
         Coverage exception level................... 25 %
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Press Enter to continue or <ctrl-z> to abort
    Cisco AP Identifier.............................. 5
    Cisco AP Name.................................... KN1252_AP01
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:21:d8:ef:06:50
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.125.18.101
    IP NetMask....................................... 255.255.255.0
    Gateway IP Addr.................................. 10.125.18.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Enabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ Knowlogy Conference Rooms Side
    Cisco AP Group Name.............................. OGR
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    --More or (q)uit current module or <ctrl-z> to abort
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.4.10.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. PoE/Medium Power (15.4 W)
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1252AG-A-K9
    AP Image......................................... C1250-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    --More or (q)uit current module or <ctrl-z> to abort
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX122990L5
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 118
          WLAN 1 :........................................ 111
          WLAN 2 :........................................ 111
          WLAN 4 :........................................ 112
          WLAN 6 :........................................ 112
          WLAN 7 :........................................ 111
          WLAN 9 :........................................ 112
          WLAN 8 :........................................ 112
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    AP Up Time....................................... 26 days, 00 h 24 m 39 s
    --More or (q)uit current module or <ctrl-z> to abort
    AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
    Join Date and Time............................... Wed Oct 9 10:59:07 2013
    Join Taken Time.................................. 0 days, 00 h 00 m 50 s
    Attributes for Slot 0
       Radio Type................................... RADIO_TYPE_80211n-2.4
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 7
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:22:55:df:a5:90
         Operation Rate Set
           1000 Kilo Bits........................... MANDATORY
           2000 Kilo Bits........................... MANDATORY
           5500 Kilo Bits........................... MANDATORY
    --More or (q)uit current module or <ctrl-z> to abort
           11000 Kilo Bits.......................... MANDATORY
         MCS Set
           MCS 0.................................... SUPPORTED
           MCS 1.................................... SUPPORTED
           MCS 2.................................... SUPPORTED
           MCS 3.................................... SUPPORTED
           MCS 4.................................... SUPPORTED
           MCS 5.................................... SUPPORTED
           MCS 6.................................... SUPPORTED
           MCS 7.................................... SUPPORTED
           MCS 8.................................... SUPPORTED
            MCS 9.................................... SUPPORTED
           MCS 10................................... SUPPORTED
           MCS 11................................... SUPPORTED
           MCS 12................................... SUPPORTED
           MCS 13................................... SUPPORTED
           MCS 14................................... SUPPORTED
           MCS 15................................... SUPPORTED
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
    --More or (q)uit current module or <ctrl-z> to abort
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 1
         Number Of Channels ........................ 11
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
       Tx Power
         Num Of Supported Power Levels ............. 8
         Tx Power Level 1 .......................... 20 dBm
         Tx Power Level 2 .......................... 17 dBm
         Tx Power Level 3 .......................... 14 dBm
         Tx Power Level 4 ..........

    Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
    Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
    There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
    Sent from Cisco Technical Support iPhone App

  • Problem with date and time preference

    hi there,
    i set my date and time and the time support yesterday and then i click the lock button to prevent further chance and last night i shut down my iMac, open it again in the morning the lock open back up and the timezone support change.
    i redo that again and restart my iMac the same thing happen. is this a problem with my software or everyone have this problem?
    any idea what should i do?
    thanks in advance
    regards AL

    Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

  • [SOLVED] Problem with UTC and CST

    I probably made a mistake while installing Arch Linux and the clocks in my computer are all a mess.
    Right now the UTC time its 6+ hours, I changed it in the bios to the right hour but that give me -6 hours in the local time thats displayed in Arch Linux and gave me the right hour in Windows 7.
    timedatectl
    Local time: Fri 2013-12-20 12:33:12 CST
    Universal time: Fri 2013-12-20 18:33:12 UTC
             RTC time: Fri 2013-12-20 18:33:12
            Timezone: America/Mexico_City (CST, -0600)
         NTP enabled: yes
    NTP synchronized: yes
    RTC in local TZ: no
          DST active: no
    Last DST change: DST ended at
                      Sun 2013-10-27 01:59:59 CDT
                      Sun 2013-10-27 01:00:00 CST
    Next DST change: DST begins (the clock jumps one hour forward) at
                      Sun 2014-04-06 01:59:59 CST
                      Sun 2014-04-06 03:00:00 CDT
    PS: Already did everything in the wiki and tried with some [SOLVED] posts.
    Edit: The problem with this its that when i use Windows 7 (to play DotA... or using the iPod, since no player can edit the files in the ipod) the hour is 6+ hours, that causes problems with the configuration in the ipod since each time i connect it the clock (that its also my only clock) changes to 6+ hours. Its maybe irrelevant for someone but i would like to have the right hour in all my systems.
    Last edited by Senketsu (2013-12-20 19:16:54)

    I am with Scimmia, everything looks correct.   But, If you boot Windows, it will try to change the BIOS clock to local time unless you tell it otherwise.
    Edit for both of your edits.  Yes, fix windows
    Last edited by ewaller (2013-12-20 18:56:32)

Maybe you are looking for