Problem with dbca
Hi,
I installed 11.2.0.2 on RHEL 5.6.2 64bit - only the software at first. Now I am using netca and dbca to create a database. I created a listener using netca. Then I ran dbca to create the database along with the enterprise manager. However, it says, that it cannot find a listener in the default location, so the EM cannot be currently installed. What is the problem with the listener?
Thanks in advance!
user10962462 wrote:
ok, the problem is back again.
Well, this is the error! I am using the dbca GUI, and it's in german, but that's the translation:
Database-Configuration Assistent: Warning
The configuration of the database with the database control assumes that a listener is installed in the current oracle default folder. You should start netca in order to configure a listener before you can continue. You can continue also without the configuration of the database control.
Well, I want to install the EM. What should I do?1) have you created database sting DBCA?
2) Listener configured using NETCA? now listener is running ? what is the status of the listener.
If everything fine then go ahead with to configure OEM.
Similar Messages
-
Gurus
I am installing RAC 10g by using NFS
Everything is running fine untill i run into this problem
"The directories /u01/app/oracle/flash_recovery_area] are not on cluster file system partitions shared across nodes node1,node2"
Any idea about it
u01 is already mounted..
Plz suggest
Regards
Nitinhi Chandra
Thanks for the reply again
I followed the following steps
mkdir /share1
mkdir /share2
Add the following lines to the /etc/exports file.
/share1 *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
/share2 *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
Run the following command to export the NFS shares.
chkconfig nfs on
service nfs restart
On both RAC1 and RAC2 create some mount points to mount the NFS shares to.
mkdir /u01
mkdir /u02
Add the following lines to the "/etc/fstab" file. The mount options are suggestions from Kevin Closson.
node1:/share1 /u01 nfs rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0 0 0
node1:/share2 /u02 nfs rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0 0 0
Mount the NFS shares on both servers.
mount /u01
mount /u02
Create the shared CRS Configuration and Voting Disk files.
touch /u01/crs_configuration
touch /u01/voting_disk
Create the directories in which the Oracle software will be installed.
mkdir -p /u01/crs/oracle/product/10.2.0/crs
mkdir -p /u01/app/oracle/product/10.2.0/db_1
mkdir -p /u01/oradata
chown -R oracle:oinstall /u01 /u02
Please Guide
Regards
Nitin -
Do you have problem with your bluetooth function in Snow Leopard? I have.
I seroiously have problem with the bluebooth function with my Macbook . It is running 10.6.1, which have been upgraded from 10.5.8. Unlike others, my bluetooth function haven't disappeared or disconnected with the wireless devices. But it cannot communicate with my mobile phone. (e.g cannot send files) After trying to do so,95% chance of It will crash itself, about 5% will success .
This is the log, i think i summit this to apple quite a lot of time already, any temporary solution? many thanks
Process: Bluetooth File Exchange [241]
Path: /Applications/Utilities/Bluetooth File Exchange.app/Contents/MacOS/Bluetooth File Exchange
Identifier: com.apple.BluetoothFileExchange
Version: 2.2.1 (2.2.1f7)
Build Info: IOBluetoothFamily-22100407~1
Code Type: X86-64 (Native)
Parent Process: launchd [130]
Date/Time: 2009-09-30 16:48:21.671 +0800
OS Version: Mac OS X 10.6.1 (10B504)
Report Version: 6
Interval Since Last Report: 8725 sec
Crashes Since Last Report: 2
Per-App Interval Since Last Report: 8530 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: 8CF3412B-F41F-447F-92D8-BEA0F5BBC27D
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000000000011
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
objc_msgSend() selector name: device
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x00007fff8159733c objc_msgSend + 40
1 com.apple.Bluetooth 0x00007fff85dbef47 -[IOBluetoothOBEXSession initWithSDPServiceRecord:] + 163
2 com.apple.Bluetooth 0x00007fff85dbf14e +[IOBluetoothOBEXSession withSDPServiceRecord:] + 72
3 com.apple.BluetoothUI 0x00000001000252c2 -[IOBluetoothConcreteObjectPush newModuleForFiles:isFirstRun:] + 233
4 com.apple.BluetoothUI 0x00000001000250fe -[IOBluetoothConcreteObjectPush initObjectPushWithBluetoothDevice:withFiles:delegate:] + 444
5 ...apple.BluetoothFileExchange 0x00000001000023df 0x100000000 + 9183
6 ...apple.BluetoothFileExchange 0x00000001000021f5 0x100000000 + 8693
7 com.apple.AppKit 0x00007fff848e6e5b -[NSServiceListener _doInvokeServiceIn:msg:pb:userData:error:unhide:] + 887
8 com.apple.AppKit 0x00007fff848e69cd _NSServiceMasterCallBack + 127
9 com.apple.CoreFoundation 0x00007fff825247bb __CFServiceControllerMessagePortCallBack + 859
10 com.apple.CoreFoundation 0x00007fff824ee382 __CFMessagePortPerform + 418
11 com.apple.CoreFoundation 0x00007fff824b0f84 __CFRunLoopDoSource1 + 356
12 com.apple.CoreFoundation 0x00007fff8248964d __CFRunLoopRun + 4413
13 com.apple.CoreFoundation 0x00007fff8248803f CFRunLoopRunSpecific + 575
14 com.apple.HIToolbox 0x00007fff859bfc4e RunCurrentEventLoopInMode + 333
15 com.apple.HIToolbox 0x00007fff859bfa53 ReceiveNextEventCommon + 310
16 com.apple.HIToolbox 0x00007fff859bf90c BlockUntilNextEventMatchingListInMode + 59
17 com.apple.AppKit 0x00007fff8442f520 _DPSNextEvent + 718
18 com.apple.AppKit 0x00007fff8442ee89 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
19 com.apple.AppKit 0x00007fff843f4a7d -[NSApplication run] + 395
20 com.apple.AppKit 0x00007fff843ed798 NSApplicationMain + 364
21 ...apple.BluetoothFileExchange 0x0000000100001204 0x100000000 + 4612
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x00007fff8065db16 kevent + 10
1 libSystem.B.dylib 0x00007fff8065fa19 dispatch_mgrinvoke + 154
2 libSystem.B.dylib 0x00007fff8065f6d6 dispatch_queueinvoke + 195
3 libSystem.B.dylib 0x00007fff8065f1f6 dispatch_workerthread2 + 244
4 libSystem.B.dylib 0x00007fff8065eb28 pthreadwqthread + 353
5 libSystem.B.dylib 0x00007fff8065e9c5 start_wqthread + 13
Thread 2:
0 libSystem.B.dylib 0x00007fff806889f2 select$DARWIN_EXTSN + 10
1 com.apple.CoreFoundation 0x00007fff824aa252 __CFSocketManager + 818
2 libSystem.B.dylib 0x00007fff8067df66 pthreadstart + 331
3 libSystem.B.dylib 0x00007fff8067de19 thread_start + 13
Thread 3:
0 libSystem.B.dylib 0x00007fff8065e94a _workqkernreturn + 10
1 libSystem.B.dylib 0x00007fff8065ed5c pthreadwqthread + 917
2 libSystem.B.dylib 0x00007fff8065e9c5 start_wqthread + 13
Thread 4:
0 libSystem.B.dylib 0x00007fff8065e94a _workqkernreturn + 10
1 libSystem.B.dylib 0x00007fff8065ed5c pthreadwqthread + 917
2 libSystem.B.dylib 0x00007fff8065e9c5 start_wqthread + 13
Thread 5:
0 com.apple.AppKit 0x00007fff8457a28e -[NSUIHeartBeat _heartBeatThread:] + 400
1 com.apple.Foundation 0x00007fff87559f65 _NSThread__main_ + 1429
2 libSystem.B.dylib 0x00007fff8067df66 pthreadstart + 331
3 libSystem.B.dylib 0x00007fff8067de19 thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000009 rbx: 0x000000011dc04e70 rcx: 0x0000000000000000 rdx: 0x0000000000000050
rdi: 0x00000001005ca300 rsi: 0x00007fff84c1ffaa rbp: 0x00007fff5fbfe540 rsp: 0x00007fff5fbfe528
r8: 0x0000000000000000 r9: 0x000000011dcfc0a4 r10: 0x000000000000001b r11: 0x0000000000000001
r12: 0x00000001005ca300 r13: 0x0000000000000000 r14: 0x00007fff85df9e40 r15: 0x000000011dc00ab0
rip: 0x00007fff8159733c rfl: 0x0000000000010206 cr2: 0x0000000000000011
Binary Images:
0x100000000 - 0x10000fff7 com.apple.BluetoothFileExchange 2.2.1 (2.2.1f7) <92874C70-235E-4FAA-7F8B-433C319C58C2> /Applications/Utilities/Bluetooth File Exchange.app/Contents/MacOS/Bluetooth File Exchange
0x100018000 - 0x100038fff com.apple.BluetoothUI 2.2.1 (2.2.1f7) <FB851666-8767-A029-1C42-0BCD397B324B> /System/Library/Frameworks/IOBluetoothUI.framework/Versions/A/IOBluetoothUI
0x100075000 - 0x100087fff libTraditionalChineseConverter.dylib ??? (???) <F86B5994-BD36-2B87-2C4A-523668E29192> /System/Library/CoreServices/Encodings/libTraditionalChineseConverter.dylib
0x7fff5fc00000 - 0x7fff5fc3bdef dyld 132.1 (???) <B633F790-4DDB-53CD-7ACF-2A3682BCEA9F> /usr/lib/dyld
0x7fff80003000 - 0x7fff80080fef libstdc++.6.dylib ??? (???) <35ECA411-2C08-FD7D-11B1-1B7A04921A5C> /usr/lib/libstdc++.6.dylib
0x7fff80081000 - 0x7fff800c7fe7 libvDSP.dylib ??? (???) <2DAA1591-8AE8-B411-7D01-68DE99C63CEE> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff800c8000 - 0x7fff800c8ff7 com.apple.Accelerate 1.5 (Accelerate 1.5) <E517A811-E0E6-89D0-F397-66122C7A25A4> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff800c9000 - 0x7fff801cefe7 libGLProgrammability.dylib ??? (???) <EDEC71CB-5F5B-7F55-47F4-19E953E3BE61> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x7fff801cf000 - 0x7fff801cfff7 com.apple.CoreServices 44 (44) <210A4C56-BECB-E3E4-B6EE-7EC53E02265D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff801d0000 - 0x7fff80564ff7 com.apple.QuartzCore 1.6.0 (226.0) <66E14771-C5F0-1415-0B7B-C45EE00C51A1> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff80644000 - 0x7fff80802ff7 libSystem.B.dylib ??? (???) <66102D4E-6C8B-77D0-6766-2A1788B20C6F> /usr/lib/libSystem.B.dylib
0x7fff80803000 - 0x7fff80806ff7 com.apple.securityhi 4.0 (36638) <77F40B57-2D97-7AE5-1331-8945C71DFB57> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x7fff80807000 - 0x7fff8080aff7 libCoreVMClient.dylib ??? (???) <3A41933A-5174-7516-37E0-8E06365BF3DA> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x7fff8080b000 - 0x7fff8082bfef com.apple.DirectoryService.Framework 3.6 (621) <925EE208-03B2-B24A-3686-57EAFBDA5ADF> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x7fff8082c000 - 0x7fff80830ff7 libmathCommon.A.dylib ??? (???) <95718673-FEEE-B6ED-B127-BCDBDB60D4E5> /usr/lib/system/libmathCommon.A.dylib
0x7fff80831000 - 0x7fff8083efff libCSync.A.dylib ??? (???) <D97C8D7E-2CA3-9495-0C41-004CE47BC5DD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x7fff80940000 - 0x7fff80951fef libz.1.dylib ??? (???) <3A7A4C48-A4C8-A78A-8B87-C0DDF6601AC8> /usr/lib/libz.1.dylib
0x7fff80952000 - 0x7fff80bd6fff com.apple.security 6.0 (36910) <F7431448-BC2E-835D-E7A2-E47E0A5CB984> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff80bd7000 - 0x7fff80c10ff7 com.apple.MeshKit 1.0 (49.0) <7587A7F2-DF5D-B8B2-A6A8-1389CF28BC51> /System/Library/PrivateFrameworks/MeshKit.framework/Versions/A/MeshKit
0x7fff80d0a000 - 0x7fff80d0cfff libRadiance.dylib ??? (???) <77F285E0-5D5E-A0B0-A89E-9332D6AB2867> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x7fff80d0d000 - 0x7fff81517fe7 libBLAS.dylib ??? (???) <FC941ECB-71D0-FAE3-DCBF-C5A619E594B8> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff81518000 - 0x7fff81518ff7 com.apple.Accelerate.vecLib 3.5 (vecLib 3.5) <BA861575-B0DE-50F5-A799-BDF188A3D4EF> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x7fff81519000 - 0x7fff8151afff com.apple.MonitorPanelFramework 1.3.0 (1.3.0) <5062DACE-FCE7-8E41-F5F6-58821778629C> /System/Library/PrivateFrameworks/MonitorPanel.framework/Versions/A/MonitorPane l
0x7fff8157c000 - 0x7fff81592fff com.apple.MultitouchSupport.framework 200.20 (200.20) <96B8C66E-D84D-863B-CB1D-F7E005569706> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x7fff81593000 - 0x7fff81649fe7 libobjc.A.dylib ??? (???) <261D97A3-225B-8A00-56AA-F9F27973063F> /usr/lib/libobjc.A.dylib
0x7fff8164a000 - 0x7fff81697ff7 libauto.dylib ??? (???) <8658DB85-C611-1212-44E5-5B2539018FA0> /usr/lib/libauto.dylib
0x7fff81698000 - 0x7fff816fafe7 com.apple.datadetectorscore 2.0 (80.7) <F9D2332D-0890-2ED2-1AC8-F85CB89D8BD4> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff81708000 - 0x7fff81716ff7 libkxld.dylib ??? (???) <823B6BE6-E952-3B3C-3633-8F4D6C4606A8> /usr/lib/system/libkxld.dylib
0x7fff818bb000 - 0x7fff818c0fff libGFXShared.dylib ??? (???) <C386DB22-A0AA-D826-ACBA-25E82B480D05> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff8193f000 - 0x7fff81ac3fff com.apple.JavaScriptCore 6531 (6531.5) <8C470ACB-1A45-71FC-673D-34EA3F5EF0DC> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x7fff81ac4000 - 0x7fff81acbff7 com.apple.DisplayServicesFW 2.1 (2.1) <2C039CF5-8AF8-6DA3-3C77-566B22EFB172> /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
0x7fff81acc000 - 0x7fff81af4fff com.apple.DictionaryServices 1.1 (1.1) <D57BA55A-4CC5-5C17-8077-AEEA27A01C7A> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff81af5000 - 0x7fff81d01ff7 com.apple.RawCamera.bundle 2.2.1 (477) <B4DD9D3B-CD05-5ACE-6808-BEC5660D805C> /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x7fff81d02000 - 0x7fff81e24ff7 com.apple.audio.toolbox.AudioToolbox 1.6 (1.6) <3CA3B481-9627-6F36-F2B8-C2763DEEB128> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x7fff81eda000 - 0x7fff81f8ffff com.apple.ink.framework 1.3 (104) <9B552E27-7E3F-6767-058A-C998E8F78692> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x7fff81f90000 - 0x7fff81f90ff7 com.apple.ApplicationServices 38 (38) <10A0B9E9-4988-03D4-FC56-DDE231A02C63> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x7fff81fcf000 - 0x7fff82024fef com.apple.framework.familycontrols 2.0 (2.0) <2520A455-5487-1964-C5D9-D284699D2537> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
0x7fff82025000 - 0x7fff8205aff7 libcups.2.dylib ??? (???) <1FE99C26-B845-F508-815A-5B2CF2CA5337> /usr/lib/libcups.2.dylib
0x7fff82091000 - 0x7fff820ccfef com.apple.AE 496 (496) <6AFD62E0-DD92-4F04-A73A-90224D80593D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff821a2000 - 0x7fff821ddff7 com.apple.CoreMediaIOServices 101.0 (715) <7B93206A-FEC5-FCC3-3587-91E3CEC61797> /System/Library/PrivateFrameworks/CoreMediaIOServices.framework/Versions/A/Core MediaIOServices
0x7fff821f4000 - 0x7fff82303ff7 libcrypto.0.9.8.dylib ??? (???) <A2DA70D0-02AE-89FA-1CDA-B3CA986CAE6D> /usr/lib/libcrypto.0.9.8.dylib
0x7fff82304000 - 0x7fff8243cff7 com.apple.CoreData 102 (246) <0502CBD8-513E-C19A-3562-20EC35535D71> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x7fff8243d000 - 0x7fff825b0fef com.apple.CoreFoundation 6.6 (550) <04EC0CC2-6CE4-4EE0-03B9-6C5109398CB1> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff825b1000 - 0x7fff825ecfe7 com.apple.CoreMedia 0.420.17 (420.17) <E299556E-6930-DC30-DA23-88B812AF63CA> /System/Library/PrivateFrameworks/CoreMedia.framework/Versions/A/CoreMedia
0x7fff825ed000 - 0x7fff825eefff liblangid.dylib ??? (???) <EA4D1607-2BD5-2EE2-2A3B-632EEE5A444D> /usr/lib/liblangid.dylib
0x7fff825ef000 - 0x7fff825fefef com.apple.opengl 1.6.3 (1.6.3) <6318A188-B43D-E82F-C157-2E76331227BD> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff825ff000 - 0x7fff825ffff7 com.apple.Carbon 150 (152) <8D8CF535-90BE-691C-EC1B-63FBE2162C9B> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x7fff82600000 - 0x7fff826e4ff7 com.apple.DesktopServices 1.5.1 (1.5.1) <65D7E707-DBCA-5752-78EC-351DC88F3AE8> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x7fff826e5000 - 0x7fff82726ff7 com.apple.SystemConfiguration 1.10 (1.10) <E3FF1FC8-C760-2047-F954-0D283DD0F714> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff82907000 - 0x7fff82996fff com.apple.PDFKit 2.5 (2.5) <7849E675-4289-6FEA-E314-063E91A4B07F> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x7fff82a33000 - 0x7fff82a34ff7 com.apple.audio.units.AudioUnit 1.6 (1.6) <7A51FBCE-7907-28A0-B2D2-CAADA78F2913> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x7fff82aa5000 - 0x7fff82abefff com.apple.CFOpenDirectory 10.6 (10.6) <0F46E102-8B8E-0995-BA85-3D9608F0A30C> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff82bf8000 - 0x7fff82bf8ff7 com.apple.quartzframework 1.5 (1.5) <B182B579-BCCE-81BF-8DA2-9E0B7BDF8516> /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x7fff82bf9000 - 0x7fff82c2afef libTrueTypeScaler.dylib ??? (???) <3F30259E-9EB0-18D2-B0F3-7B8A9625574E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib
0x7fff82c9e000 - 0x7fff82ce2fef com.apple.ImageCaptureCore 1.0 (1.0) <29A6CF83-B5C2-9730-D71D-825AEC8657F5> /System/Library/Frameworks/ImageCaptureCore.framework/Versions/A/ImageCaptureCo re
0x7fff82ce3000 - 0x7fff82ea0fff libicucore.A.dylib ??? (???) <224721C0-EC21-94D0-6484-66C603C34CBE> /usr/lib/libicucore.A.dylib
0x7fff830c8000 - 0x7fff830d9fff com.apple.DSObjCWrappers.Framework 10.6 (134) <3C08225D-517E-2822-6152-F6EB13A4ADF9> /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x7fff830da000 - 0x7fff830e0ff7 com.apple.DiskArbitration 2.3 (2.3) <857F6E43-1EF4-7D53-351B-10DE0A8F992A> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff83120000 - 0x7fff832dafef com.apple.ImageIO.framework 3.0.0 (3.0.0) <D5594E10-F805-F816-10E9-F95753BE18CC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x7fff832db000 - 0x7fff833b5ff7 com.apple.vImage 4.0 (4.0) <354F34BF-B221-A3C9-2CA7-9BE5E14AD5AD> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x7fff833b6000 - 0x7fff835effe7 com.apple.imageKit 2.0 (1.0) <F579694D-9FA0-6365-45CD-E380C2EB2573> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/ImageKit.fram ework/Versions/A/ImageKit
0x7fff83654000 - 0x7fff83667fff libGL.dylib ??? (???) <D452ADC0-04B1-E24F-03E6-717E58E1D659> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x7fff836a7000 - 0x7fff83729fef com.apple.QuickLookUIFramework 2.0 (327.0) <B9850E11-3F04-100F-0122-B4AD6222A43F> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuickLookUI.f ramework/Versions/A/QuickLookUI
0x7fff8372a000 - 0x7fff837c4fe7 com.apple.ApplicationServices.ATS 4.0 (???) <76009EB5-037B-8A08-5AB5-18DA59559509> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x7fff837c5000 - 0x7fff837d9ff7 com.apple.speech.synthesis.framework 3.10.35 (3.10.35) <621B7415-A0B9-07A7-F313-36BEEDD7B132> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff838a6000 - 0x7fff838b5fff com.apple.NetFS 3.2 (3.2) <61E3D8BE-A529-20BF-1A11-026EC774820D> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff838b6000 - 0x7fff838ccfef libbsm.0.dylib ??? (???) <42D3023A-A1F7-4121-6417-FCC6B51B3E90> /usr/lib/libbsm.0.dylib
0x7fff83a40000 - 0x7fff83a44ff7 libCGXType.A.dylib ??? (???) <50EB4AB0-0B25-E5DC-FC9E-12268B51F02F> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXType.A.dylib
0x7fff83a45000 - 0x7fff83aaffe7 libvMisc.dylib ??? (???) <524DC30F-6A54-CCED-56D9-F57033B06E99> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff83ab0000 - 0x7fff83ab0ff7 com.apple.Cocoa 6.6 (???) <68B0BE46-6E24-C96F-B341-054CF9E8F3B6> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff83ab1000 - 0x7fff83ab1ff7 com.apple.vecLib 3.5 (vecLib 3.5) <5B072584-9579-F54F-180E-5D425B37E85C> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x7fff83ad3000 - 0x7fff83c40fe7 com.apple.QTKit 7.6.3 (1584) <6D02A542-5202-4022-2050-5BE01F70D225> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x7fff83c41000 - 0x7fff84139ff7 com.apple.VideoToolbox 0.420.17 (420.17) <E034AA6E-A1E4-BB8F-5AFA-F5C354DDD889> /System/Library/PrivateFrameworks/VideoToolbox.framework/Versions/A/VideoToolbo x
0x7fff8413a000 - 0x7fff8415bfff libresolv.9.dylib ??? (???) <01C7C750-7F6A-89B3-C586-5C50A839019E> /usr/lib/libresolv.9.dylib
0x7fff84164000 - 0x7fff841c1fef com.apple.framework.IOKit 2.0 (???) <65AA6170-12E3-BFB5-F982-E0C433610A1F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8420b000 - 0x7fff8428bff7 com.apple.iLifeMediaBrowser 2.1.3 (346.0.3) <04677A98-142E-9C0E-18A7-4C74275856B7> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x7fff842cb000 - 0x7fff8431cfe7 com.apple.HIServices 1.8.0 (???) <113EEB8A-8EC6-9F86-EF46-4BA5C2CBF77C> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x7fff8431d000 - 0x7fff8431ffff com.apple.print.framework.Print 6.0 (237) <70DA9755-5DC1-716B-77E2-E42C5DAB85A2> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x7fff843eb000 - 0x7fff84ddffe7 com.apple.AppKit 6.6.1 (1038.2) <C17AD2AC-8639-D20F-CD99-36EEC619A5F0> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff84e43000 - 0x7fff84e49ff7 IOSurface ??? (???) <8E0EE904-59D1-9AA0-CE55-B1777F4BAEC1> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x7fff84e4a000 - 0x7fff84edafff com.apple.SearchKit 1.3.0 (1.3.0) <4175DC31-1506-228A-08FD-C704AC9DF642> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff8511e000 - 0x7fff851aafef SecurityFoundation ??? (???) <B69E2FF9-A698-4923-BC8B-180224B6EF75> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fff85219000 - 0x7fff85296fe7 com.apple.CoreText 3.0.0 (???) <51175014-9F0C-7E96-FB6F-3DC5E446B92E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x7fff852c8000 - 0x7fff8534cfff com.apple.print.framework.PrintCore 6.0 (312) <1F747E69-924D-8C5B-F318-C4828CC6E85D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x7fff8534d000 - 0x7fff855b7ff7 com.apple.QuartzComposer 4.0 (156.6) <4E43D357-4A18-5D16-02E8-14324A5B9302> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x7fff855d9000 - 0x7fff856e2fff com.apple.MediaToolbox 0.420.17 (420.17) <31834AB2-1BFF-92D5-A8D2-21B0AE51FA98> /System/Library/PrivateFrameworks/MediaToolbox.framework/Versions/A/MediaToolbo x
0x7fff85731000 - 0x7fff85797fe7 com.apple.AppleVAFramework 4.6.2 (4.6.2) <3DA57727-EAD1-A199-4093-54CC4698A109> /System/Library/PrivateFrameworks/AppleVA.framework/Versions/A/AppleVA
0x7fff85832000 - 0x7fff8588efff libGLU.dylib ??? (???) <AA2D37B3-8B7C-6772-F8BA-7364284C55FE> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x7fff8588f000 - 0x7fff858a5fff com.apple.ImageCapture 6.0 (6.0) <5B5AF8FB-C12A-B51F-94FC-3EC4698E818E> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x7fff858a6000 - 0x7fff85946fff com.apple.LaunchServices 360.3 (360.3) <02FFE657-CC7A-5266-F06E-8732E28F70A9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff85947000 - 0x7fff85991ff7 com.apple.Metadata 10.6.0 (507.1) <AA0DF8E0-9B5B-2377-9B20-884919E28994> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff85992000 - 0x7fff85c8ffef com.apple.HIToolbox 1.6.0 (???) <870B39B2-55BD-9C82-72EB-2E3470BD0E14> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x7fff85c90000 - 0x7fff85d9aff7 com.apple.MeshKitIO 1.0 (49.0) <66600E25-66F9-D31A-EA47-E81518FF6DDA> /System/Library/PrivateFrameworks/MeshKit.framework/Versions/A/Frameworks/MeshK itIO.framework/Versions/A/MeshKitIO
0x7fff85d9b000 - 0x7fff85e2cff7 com.apple.Bluetooth 2.2.1 (2.2.1f7) <D0ED3891-8B9B-6350-D77C-F8B5B514AB9F> /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
0x7fff85e2d000 - 0x7fff85f44fef libxml2.2.dylib ??? (???) <6D4C196C-B061-CBCD-AAFD-A21736A8425C> /usr/lib/libxml2.2.dylib
0x7fff85f45000 - 0x7fff85f57fe7 libsasl2.2.dylib ??? (???) <76B83C8D-8EFE-4467-0F75-275648AFED97> /usr/lib/libsasl2.2.dylib
0x7fff85f82000 - 0x7fff85fd1ff7 com.apple.DirectoryService.PasswordServerFramework 6.0 (6.0) <14FD0978-4BE0-336B-A19E-F388694583EB> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
0x7fff8601b000 - 0x7fff860e7fff com.apple.CFNetwork 454.4 (454.4) <E7721AD8-3177-8749-60F7-5EF323E6492B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x7fff860e8000 - 0x7fff8612ffef com.apple.QuickLookFramework 2.0 (327.0) <E15E267E-D462-2AD0-DB03-A54E0F94452F> /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x7fff86130000 - 0x7fff86131ff7 com.apple.TrustEvaluationAgent 1.0 (1) <4B6B7853-EDAC-08B7-3324-CA9A3802FAE2> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff86316000 - 0x7fff86341ff7 libxslt.1.dylib ??? (???) <87A0B228-B24A-C426-C3FB-B40D7258DD49> /usr/lib/libxslt.1.dylib
0x7fff86342000 - 0x7fff86674fef com.apple.CoreServices.CarbonCore 859.1 (859.1) <5712C4C1-B18B-88EE-221F-DA04A8EDA029> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff87099000 - 0x7fff870e8ff7 libTIFF.dylib ??? (???) <E11A75A8-223C-8B5E-7F62-821F9ADE8821> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x7fff870e9000 - 0x7fff87151ff7 com.apple.MeshKitRuntime 1.0 (49.0) <580F1945-540B-1E68-0341-A6ADAD78397E> /System/Library/PrivateFrameworks/MeshKit.framework/Versions/A/Frameworks/MeshK itRuntime.framework/Versions/A/MeshKitRuntime
0x7fff87152000 - 0x7fff87201fef edu.mit.Kerberos 6.5.8 (6.5.8) <A9C16B72-A1F8-3DDE-7772-E7635774CA6E> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x7fff87202000 - 0x7fff872beff7 com.apple.CoreServices.OSServices 352 (352) <CD933BBD-B260-552F-E64E-291D6ED3091A> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff872bf000 - 0x7fff872c5fff libCGXCoreImage.A.dylib ??? (???) <D113DB65-BB37-5499-8825-E6AE8AB1F8B8> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXCoreImage.A.dylib
0x7fff872c6000 - 0x7fff872c9fff com.apple.help 1.3.1 (41) <54B79BA2-B71B-268E-8752-5C8EE00E49E4> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x7fff872d2000 - 0x7fff87312fef com.apple.QD 3.31 (???) <0FA2713A-99BD-A96B-56AF-7DB0AB4927AD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x7fff87313000 - 0x7fff87391fef com.apple.audio.CoreAudio 3.2.0 (3.2) <51E4AA76-3A8A-2B78-95D2-582501421A4E> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x7fff87392000 - 0x7fff873c3fff libGLImage.dylib ??? (???) <4F318A3E-20C1-D846-2B36-62451A3241F7> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x7fff87549000 - 0x7fff877cafe7 com.apple.Foundation 6.6 (751) <CCE98C5C-DFEA-6C80-A014-A5985437072E> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff877cb000 - 0x7fff87812ff7 com.apple.coreui 0.2 (112) <E64F7594-7829-575F-666A-0B16875FC644> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x7fff87813000 - 0x7fff87828fff com.apple.LangAnalysis 1.6.5 (1.6.5) <D4956302-5A2D-2AFD-C143-6287F1313196> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff87834000 - 0x7fff87f265d7 com.apple.CoreGraphics 1.535.5 (???) <6599C41F-2D50-5E04-44E4-44FA90E022B5> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff87f27000 - 0x7fff87f2efff com.apple.OpenDirectory 10.6 (10.6) <72A65D76-7831-D31E-F1B3-9E48BF26A98B> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff87f2f000 - 0x7fff87f5eff7 com.apple.quartzfilters 1.6.0 (1.6.0) <9CECB4FC-1CCF-B8A2-B935-5888B21CBEEF> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzFilters .framework/Versions/A/QuartzFilters
0x7fff87f5f000 - 0x7fff87fcbff7 com.apple.CorePDF 1.0 (1.0) <8D76B569-F938-6337-533A-5C8A69B005DA> /System/Library/PrivateFrameworks/CorePDF.framework/Versions/A/CorePDF
0x7fff87fcc000 - 0x7fff88080fef com.apple.ColorSync 4.6.0 (4.6.0) <080BEDDE-E7A4-F88D-928B-7501574A157B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x7fff88081000 - 0x7fff88086fff libGIF.dylib ??? (???) <0C112067-95FE-B9BC-C70C-64A46A277F34> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff88087000 - 0x7fff880a2ff7 com.apple.openscripting 1.3 (???) <DFBFBFD3-90C0-0710-300C-1A7210CB3713> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x7fff880ac000 - 0x7fff880caff7 libPng.dylib ??? (???) <6A0E35B8-2E33-7C64-2B53-6F47F628DE7A> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x7fff880cb000 - 0x7fff880d0ff7 com.apple.CommonPanels 1.2.4 (91) <4D84803B-BD06-D80E-15AE-EFBE43F93605> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x7fff880d1000 - 0x7fff8810eff7 libFontRegistry.dylib ??? (???) <43ADB89E-036B-9D8F-CC4B-CE6B6BCC5AB5> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
0x7fff88482000 - 0x7fff888c5fef libLAPACK.dylib ??? (???) <0CC61C98-FF51-67B3-F3D8-C5E430C201A9> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff888c6000 - 0x7fff888eaff7 com.apple.CoreVideo 1.6.0 (43.0) <FF5F0EEF-56BE-24DD-C8FA-CB41F126E6A8> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x7fff88923000 - 0x7fff88966ff7 libRIP.A.dylib ??? (???) <8D7113D2-71A7-A205-D2D0-2DB0F37FFBB3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x7fff88967000 - 0x7fff8898dfe7 libJPEG.dylib ??? (???) <52ACD177-F101-BEF5-E7CC-9131F8372D0A> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x7fff8898e000 - 0x7fff889afff7 com.apple.opencl 11 (11) <A53E07FB-AD2F-9F3E-EC00-7DCC7DDE2F90> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
0x7fff889b0000 - 0x7fff889bbff7 com.apple.speech.recognition.framework 3.10.10 (3.10.10) <7E2A89FC-0F18-1CCC-472E-AD0E2BC2DD4C> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x7fff889bc000 - 0x7fff88a75fff libsqlite3.dylib ??? (???) <5A15E12A-AE8F-1A36-BBC7-564E7D7AD0FB> /usr/lib/libsqlite3.dylib
0x7fff88a76000 - 0x7fff88b31ff7 libFontParser.dylib ??? (???) <8926E1B0-6D1E-502A-5028-1DCC57F6D6FA> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fffffe00000 - 0x7fffffe01fff libSystem.B.dylib ??? (???) <66102D4E-6C8B-77D0-6766-2A1788B20C6F> /usr/lib/libSystem.B.dylib
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.31f0
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.19)
Bluetooth: Version 2.2.1f7, 2 service, 1 devices, 1 incoming serial ports
Network Service: 乙太網路, Ethernet, en0
Serial ATA Device: WDC WD5000BEVT-22ZAT0, 465.76 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
USB Device: Hub, 0x058f (Alcor Micro, Corp.), 0x6254, 0xfd100000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd140000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd142000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0229, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Message was edited by: OhOhOh*Deleted*
-
Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition
Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh MenonSaqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot -
Hello all, I've just got some feedback from a helful person at http://www.crunge.com/ about the problems concerning RedHat Linux 7.0 and Oracle 8.1.6, this MAY apply to other newer linux distributions.
I've tried, without luck, to install Oracle on RedHat 7.0 and Slackware 7 (the newest one), and it would not install properly, kept stopping right about when the database initialization started at 80% finished install procedure. Sp i wrote them a mail, not expecting an answer really, but I did got an answer, and below is what the person said;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, that if you install the latest
glibc errata (2.1.94) then the DBCA completes but the Oracle executables
still die. The DBCA problem was apparently a Java issue that is fixed in
the errata. But you're still out of luck since the exes won't work.
It might appear that this is a problem with Red Hat Linux 7. But it appears
that it is a problem with some assumptions that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library included with RHL 6.2) but which
prove false with later glibc versions. As other Linux distributions adopt
the new glibc Oracle will fail to work on them as well.
The best advice I can give at this point is to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will address the glibc issues with the
8.1.7 release.
Chris
p.s. Do not construe this
as an official Red Hat response; I merely forwarded your e-mail from my
home account. This response and the web pages I put up are mine.
So i guess one sollution to the problem is to try a bit older version of the linux you are having problems with (i tried it on RH 6.1 and it worked like a dream).
Another solution can be to wait it out to check and see if Oracle put a fix out here on technet...?
Hope this helps people bogged down in fustration.
Regards
Ole-Henrik Helin
Computer consultant, Mesan AS
Norway<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Graham Strang ([email protected]):
Hey all. Just to let you know that it is entierly possible to get Oracle to install under RedHat 7 and run happily. I have done it on two differenct machines. There is a bit of fooling with glibc to get it to work. However after you do that it works like a dream. VALinux has a work around posted at: http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/
The READEME.Oracle8i has the work around and the two tar balls are the necessary files. I followed the directions to the letter and they worked like a dream. Any questions feel free to drop me a line.
Cheers,
Graham<HR></BLOCKQUOTE>
OK, so i followed your instructions to the letter (several times), sure I get past the 80% bug but now I have new erros coming up , -"Error in invoking target install of makefile /usr/oracle/sqlplus/lib/ins_sqlplus.mk". I get a whole series of these errors for various mk files. These errors apear during the link phase of the install, prior to the glibc workaround I was not getting this. I am a newbie to Linux and trying to give it a serious go but so far I have had little luck
Any help appreciated.
Nick
null -
Can't connect to my database problem with listener or tnsname help urgent
Hi here are the problems i get
sqlplus scott/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 13:51:24 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Here is my config :
ID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = CHUCKY)
(ORACLE_HOME = /home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1)
(SID_NAME = CHUCKY)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.1)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
# tnsnames.ora Network Configuration File: /home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1//network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
CHUCKY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(Key = EXTPROC))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CHUCKY)
(INSTANCE_NAME = CHUCKY)
(GLOBAL_NAME = CHUCKY)
(HS = OK)
I can't figure out what's wrong I have created database with dbca script giving
sid=chucky
globaldb name = chucky.rss-global.com
I don't know what to do
lsnrctl services listener
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 13:54:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.1)(PORT=1521)))
Services Summary...
Service "CHUCKY" has 1 instance(s).
Instance "CHUCKY", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
Oracle is started and the listener too.What can i do?Ok I have changed environment rules
oracle@debian:~$ env|grep ORACLE
ORACLE_SID=CHUCKY
ORACLE_BASE=/home/oracle
ORACLE_HOME=/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/
But now even if i connect
oracle@debian:~$ sqlplus SCOTT/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 15:30:37 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
or
oracle@debian:~$ sqlplus SYS/tiger@CHUCKY as SYSDBA
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 15:31:15 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
I am not sure but I think scott user is maybe locked by default.
The problem to verify that is that I can't connect no more to oem, I only could the first time after creating CHUCKY database with emca .
Connection refused, my computer doesn't make a listen on theses addresses, it only made a listen on it the first time I had created database.
I don't know to reactivate it .
http://localhost:5500/em
http://localhost:1158/em
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (test) = 1158
Enterprise Manager Agent Port (test) = 3938
Enterprise Manager Console HTTP Port (chucky) = 5500
Enterprise Manager Agent Port (chucky) = 1830
So I don't know exactly what the problem is oem is no more accessible so I can't change permission or reactivate scott user and it is said permissions denied when doing sqlplus as sysdba. -
RAC: ocfs-option disabled when trying to create database with dbca.
Hi everybody,
I have a really weird problem running dbca in my 2-node RAC installation on Red Hat ES.
The software version of both oracle clusterware and rdbms is 10.2.0.2.0, meaning the latest patchset has been applied.
I have installed and configured ocfs, and 4 different ocfs-partition are neatly presented to the operating system. I can save files and browse the ocfs file system, everything seems to be working fine.
Also, srvctl status nodeapps -n <nodename> shows that oracle clusterware is running nicely, all the components are up including the listener, which I used netca to configure.
However, when trying to create a cluster database using dbca, the option to use ocfs is not enabled, e.g it is "grayed out" in the Oracle Universal installer. So is raw devices option. The only option left is the ASM, which is selectable in the OUI.
In addition, I can indeed run scripts manually and create a single-instance database and use the ocfs-partitions for the datafiles, redo logs and archivelogs. No problems at all!
Do any of you guys have the slightest clue what can be causing this behaviour? Of course I have raised an issue with Oracle Support, but while waiting for an update, it doesn't hurt trying the forum.
I appreciate all suggestions, thanks for taking the time to read my posting.
Best Regards,
VegardYou were right.
http://download-uk.oracle.com/docs/html/B14203_05/intro.htm#sthref44
under the section
"1.3 Configuration Tasks for Oracle Clusterware and Oracle Real Application Clusters"
"... If you use RAC on Oracle Database 10g Standard Edition, then you must use ASM."
Thanks, problem solved.
- Vegard -
Hi @all
OS Windows Server 2008 (Standard)
DB 11.1.0.7.0
I try to configure DB Control manually with
D:\ORACLE\product\11.1.0\db_1\BIN>emca -config dbcontrol db -repos create
result is
15.09.2009 13:19:14 oracle.sysman.emcp.EMConfig perform
INFO: Dieser Vorgang wird in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_1
3_15_52.log protokolliert.
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emd.properties konnte
nicht gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties.emca
konnte nicht gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\emd\targets.xml konnte nicht
gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Database Control wird gestoppt (dies kann etwas lõnger dauern) ...
15.09.2009 13:19:15 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Das EM-Repository wird erstellt (dies kann etwas lõnger dauern)...
15.09.2009 13:24:22 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository erfolgreich erstellt
15.09.2009 13:24:23 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepositor
y
INFO: Konfigurationsdaten werden in das EM-Repository hochgeladen (dies kann etw
as lõnger dauern) ...
15.09.2009 13:25:02 oracle.sysman.emcp.EMReposConfig invoke
INFO: Konfigurationsdaten wurden erfolgreich hochgeladen
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysma
n\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\S
AXMBS\emca_2009_09_15_13_15_52.log.
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden
Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_15
_52.log.
snippet of the log
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
Caused by: java.io.FileNotFoundException: D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties (Zugriff verweigert)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
at oracle.sysman.emcp.util.FileUtil._copyFile(FileUtil.java:257)
... 11 more
15.09.2009 13:25:02 oracle.sysman.emcp.EMDBCConfig updateEmomsProps
KONFIG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties.emca wird in D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties kopiert
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_15_52.log.
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
KONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties
at oracle.sysman.emcp.EMDBCConfig.performConfiguration(EMDBCConfig.java:405)
at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:167)
at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:137)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:223)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
the problem is Caused by: java.io.FileNotFoundException: D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties (access denied)
and when i try to deconfig this following occured
15.09.2009 13:30:28 oracle.sysman.emcp.EMConfig perform
INFO: Dieser Vorgang wird in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_1
3_29_13.log protokolliert.
15.09.2009 13:30:28 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Database Control wird gestoppt (dies kann etwas lõnger dauern) ...
15.09.2009 13:30:28 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Can't find file D:\ORACLE\product\11.1.0\db_1\host\sysman\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\S
AXMBS\emca_2009_09_15_13_29_13.log.
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden
Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_29
_13.log.
Can't find file D:\ORACLE\product\11.1.0\db_1\host_db\sysman\config\emoms.properties
With Windows Server 2003 I haven't any problems with the configuration of database control over cmd.
Any Ideas?Please run the following command
cmd>net start OracleDBConsolexxx(Assume sid name=xxx
cmd>set oracle_sid=xxx
cmd>emca (You will get all related keyword of emca)
Firstly you have to check that if you have created your database through DBCA then you have to drop old repository or recreate repository:
To drop (remove) the configuration files and repository for Database Console, run:
cmd>emca -deconfig dbcontrol db -repos drop
To recreate (remove & create) the configuration files and repository for Database Console, run:
cmd>emca -config dbcontrol db -repos recreate
(Please mark it helpful/Answered if you get solution)
Regards,
Suman -
10g: Clone database with DBCA silent option
Hello community,
I have tried now for several times to make a clone of my existing database with DBCA and "-silent" option. I could improve my progress in cloning but now I always stick in the following error:
But first, what I have done so far:
1. Created a clone template of my Database with command:
dbca -silent -createCloneTemplate -sourceSID DBORIGIN -templateName myTest.dbc -datafileJarLocation /tmp/oratest
2. Create the clone-database by using the template from (1.) with command:
dbca -silent -createDatabase -templateName myTest.dbc -cloneTemplate -gdbname DBCLONE -sid DBCLONE -datafileJarLocation /tmp/oratest -datafileDestination /oradata -responseFile NO_VALUE -characterset AL32UTF8
Then the progress of execution is shown, it ends with a link to a log file. In this log file I can see the following contents:
==============================
Copying database files
DBCA_PROGRESS : 1%
DBCA_PROGRESS : 3%
DBCA_PROGRESS : 11%
DBCA_PROGRESS : 18%
DBCA_PROGRESS : 26%
DBCA_PROGRESS : 33%
DBCA_PROGRESS : 37%
Creating and starting Oracle instance
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oradata/DBCLONE/<OMF_CONTROL_0>'
ORA-27040: file create error, unable to create file
DBCA_PROGRESS : 38%
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORA-01507: database not mounted
DBCA_PROGRESS : 40%
DBCA_PROGRESS : 41%
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oradata/DBCLONE/<OMF_CONTROL_0>'
ORA-27040: file create error, unable to create file
ORA-01507: database not mounted
DBCA_PROGRESS : 46%
DBCA_PROGRESS : 47%
ORA-01219: database not open: queries allowed on fixed tables/views only
ORA-01507: database not mounted
DBCA_PROGRESS : 52%
ORA-01219: database not open: queries allowed on fixed tables/views only
ORA-01507: database not mounted
DBCA_PROGRESS : 53%
DBCA_PROGRESS : 58%
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_DATAPUMP_UTL.REPLACE_DEFAULT_DIR' must be declared
and so on
=====================================================
I have no idea where the "<OMF_CONTROL_0>" comes from. It is nowhere included in my myTest.dbc-file. In my eyes, it looks like that DBCA tries to create the file exactly with this filename - and this fails on Solaris, sure...
Here is, what I have in my template file "myTest.dbc" regarding the control files:
=======================
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="o1_mf_2k1zmdmp_.ctl" filepath="{ORACLE_BASE}/oradata/{DB_UNIQUE_NAME}/"/>
<image name="o1_mf_2k1zmdvo_.ctl" filepath="{ORACLE_BASE}/oradata/{DB_UNIQUE_NAME}/"/>
</ControlfileAttributes>
====================================
To be honest, it is the first time that i try to use the DBCA with all these "special" options, especially the silent mode.
Does anyone have an idea what is going wrong in my case described here? What do I or could I change to come to a success clone?
Maybe, you can tell me where I can find some kind of "how to" for creating a clone using the silent-option.
Thanks a lot in advance for helping a newbie! ;-)
Regards
FireFighterHello,
finally I was successful in installing the clone of my DB. :-)
You remember that I had problems with the control files and these looked very strange:
control_files=("/oradata/DBCLONE/<OMF_CONTROL_0>","/oradata/DBCLONE/<OMF_CONTROL_1>")
The hint to check the permission in "/oradata" was a good one. The permissions were right all the time, but Oracle's DBCA was not able to create the sub-directory "DBCLONE". When I created it manually before installing the clone, the installation worked fine!
I'm still wondering about this because all other subdirectories were created automatically during running "dbca" (e.g. all subdirectories "DBCLONE" needed below the $ORACLE_BASE/admin/-directory like adump,bdump and so on...).
And i'm wondering about the names of the control files:
I expected that these strange OMF-names would be replaced by a "normal" file name. But "dbca" was able to create the files exactly with the names "<OMF_CONTROL_0>" and "<OMF_CONTROL_0>"...
As I had understood so far from OMF-concept, isn't the idea that Oracle takes care of file-naming instead of myself? I mean it can't be that I have to enter the template for DBCA and manually enter the control files names...
I'm still close to the thought that it be a bug that isn't documented until now. Maybe, when I have some time left I will open a service request at metalink.
If you are interested in this I will keep you informed on this topic. The other way round I stay interested in your opions and hints for using "dbca" to make and install a DB-clone.
Thanks again for you effort to help me as a rookie in Oracle. :-)
Regards
FireFighter -
I am having a problem with a 9i release 2 install on linux....
everything seems to go fine all installs and then when it gets to running netca and dbca at the end all the assistants fail to start, usually taking OUI with them, however on the one time it didn't it generated the same errors as the running them from the command line post install (see below).
does anyone have any ideas on this I'm begining to wonder if the jvm isn't corrupted as this happens straight off with any of the assistants.
TIA
Matt
oracle@xenon:~> netca
SIGSEGV 11* segmentation violation
stackbase=BFFFECEC, stackpointer=BFFFD0A4
Full thread dump:
"SIGQUIT handler" (TID:0x405b42a0, sys_thread_t:0x80c51e8, state:R, thread_t: t@2051, sp:0x0 threadID:0x2c3a, stack_base:0xbf5ffaa0, stack_size:0x200000) prio=1075757952
"Finalizer thread" (TID:0x405b4088, sys_thread_t:0x80c50c0, state:CW, thread_t: t@1026, sp:0x0 threadID:0x2c39, stack_base:0xbf7ffaa0, stack_size:0x200000) prio=1075757952
"main" (TID:0x405b40b0, sys_thread_t:0x80cbba0, state:R, thread_t: t@1024, sp:0x0 threadID:0x2c2e, stack_base:0xbfffecec, stack_size:0x200000) prio=1075757952 current thread
java.lang.System.initializeSystemClass(System.java)
Monitor Cache Dump:
Registered Monitor Dump:
Thread queue lock: <unowned>
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Waiting to be notified:
"Finalizer thread" (0x80c50c0)
Monitor registry: owner "main" (0x80cbba0, 1 entry)
AbortedCheck that /tmp is not too small. That will cause this problem.
If /tmp is OK, then you need to re-link your executables, maybe all of them, not just rdbms.mk.
In $ORACLE_HOME/bin there's a relink script called "relink".
Just run "relink all".
There's a document on this available on Metalink - (Docid -131321.1). -
We're currently transitioning to RMAN as a backup solution for our databases, but there seems to be a problem with some of the bases which has previously been backed up by the use of DBCA.
I've been following this tutorial; http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov002.htm
It goes swimmingly until I reach the point where I'm to restore the actual database. Firstly, this is the command used to take the actual backup:
run {
set controlfile autobackup format for device type disk to '${INC_DIR}/cf_%F';
allocate channel d1 type disk;
allocate channel d2 type disk;
allocate channel d3 type disk;
backup
incremental level 0
tag ${SID}_level_0
filesperset 6
format '${INC_DIR}/df_t%t_s%s_p%p'
(database);
}Then the files that are generated are transferred to a new host through FTP, so there's no use of tape or NFS, but both machines run the same OS and Oracle version. As previously mentioned, the various spfile and control file restorations and modifications proceed without a hitch, it's towards the end of the tutorial the problem occurs when I attempt to restore the actual database. And mind you, this is on databases which are currently being backed up through the use of DBCA.
RUN
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT '/data1/backup/rman/qcdash1/incremental/df_t%t_s%s_p%p';
ALLOCATE CHANNEL disk2 DEVICE TYPE DISK FORMAT '/data1/backup/rman/qcdash1/incremental/df_t%t_s%s_p%p';
# rename the datafiles and online redo logs
SET NEWNAME FOR DATAFILE 1 TO '/data1/oradata/qcdash1t/system01.dbf';
SET NEWNAME FOR DATAFILE 2 TO '/data1/oradata/qcdash1t/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 3 TO '/data1/oradata/qcdash1t/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 4 TO '/data1/oradata/qcdash1t/users01.dbf';
SET NEWNAME FOR DATAFILE 5 TO '/data1/oradata/qcdash1t/tdcom_data.dbf';
SET NEWNAME FOR DATAFILE 6 TO '/data1/oradata/qcdash1t/tdcom_index.dbf';
# Do a SET UNTIL to prevent recovery of the online logs
SET UNTIL SCN 28713945;
# restore the database and switch the datafile names
RESTORE DATABASE;
SWITCH DATAFILE ALL;
# recover the database
RECOVER DATABASE;
channel disk1: starting datafile backupset restore
channel disk1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /data1/oradata/qcdash1t/system01.dbf
restoring datafile 00002 to /data1/oradata/qcdash1t/undotbs01.dbf
restoring datafile 00003 to /data1/oradata/qcdash1t/sysaux01.dbf
restoring datafile 00004 to /data1/oradata/qcdash1t/users01.dbf
restoring datafile 00005 to /data1/oradata/qcdash1t/tdcom_data.dbf
restoring datafile 00006 to /data1/oradata/qcdash1t/tdcom_index.dbf
ORA-19624: operation failed, retry possible
ORA-19505: failed to identify file "/backup/oracle/qcdash1/qcdash1.dfb"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backupI omitted a few unimportant entires to make it more readable. It's clearly failing when trying to find the qcdash1.dfb file, but why is it even looking for it? There's no tablespace in the database by that name and there's no RMAN configuration pointing to the path in question and neither does any of the newly restored database parameter and control files. The only link I could find was that on the old host a DBCA template job runs which directs its output to that very path, but what does that have to do with RMAN?try restore after doing this
Resync the RMAN Catalog
$ rman target sys/<passwd>@target catalog rman/<passwd>@catalog
RMAN> resync catalog;
Or
Validate the backup pieces.
$ rman target sys/<passwd>@target catalog rman/<passwd>@catalog
RMAN> crosscheck backup;
RMAN> resync catalog; -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and camera.
Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while((!performing.isShown()) && (backgroundCamera.isShown())){
Thread.yield();
notifyAll();
}).start();
new Thread(new Runnable(){
public void run() {
try {
this.wait();
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?Hi,
I've finally managed to work this fine.
The code:
Object o = new Object();
display.setCurrent(perform);
new Thread(new Runnable(){
public void run() {
while(!performing.isShown()){
Thread.yield();
synchronized(o) {
o.notify();
}).start();
new Thread(new Runnable(){
public void run() {
try {
synchronized(o) {
o.wait(1);
} catch(Exception e) {
exceptionHandler(e);
photo = camera.snapshot();
display.setCurrent(displayPhoto);
}).start();
Maybe you are looking for
-
Trying to restore a Mountain Lion caldav.sql into a fresh/clean Mavericks installation
Call me cynical, but upgrades and Migration Assistant were never my thing. I'm starting to experiment with migrating some of my Mountain Lion OS X Servers to Mavericks. Under OS X Server 2.2.x (Mountain Lion), I had a script that would individually b
-
How do I make images of text searchable on a Mac?
I am downloading a lot of PDFs from the New York Times archives (c. 1855) for some historical research I'm doing. I assume the Times has OCR'd their images of these old articles because the text is word-searchable online. Here are my questions, in de
-
Java studio enterprise licensing
Hello, Anybody know in which condition sun java studio enterprise can be used to develop open source applications? I post this question because I asked the sun licensing center (email to [email protected]) but it seems than nobody know the answer to
-
I have an apple account but it keeps saying that I have to verified it and that on my yahoo account that I have verified it what do I do?
-
Hi, I am adding some condition to return the query dynamically but oracle apex is not allowing. Please suggest me what is the error in this query and how to use the function returning query in list of values --BEGIN -- IF :P60_TYPE_OF_SERVICE_NEEDED