Problem with decimal stepSize in the spark NumericStepper
Hi together,
I get problems when I define a decimal stepSize for a spark NumericStepper:
<s:NumericStepper id="numericStepperRange" x="318" y="104" width="65"
maximum="20000.0" minimum="0.1"
stepSize="0.1" value="0.1" />
When I click on the Up Arrow following numbers will be displayed: 0.1 > 1.1 > 11.1 > 111.1 > 1111.1 > 11111.1 > 20000.
If I exchange the spark NumericStepper with the one from the MX component set, the problem does not occure.
<mx:NumericStepper id="numericStepperRange" x="318" y="104" width="65"
maximum="20000.0" minimum="0.1"
stepSize="0.1" value="0.1" />
0.1 > 0.2 > 0.3 > 0.4 > 0.5 > ...
Maybe someone else had the same problem?
Thanks!
I tried spark numericStepper and it works correctly.
<s:NumericStepper minimum="0.1" maximum="20000.0" stepSize="0.1" value="0.1" />
Similar Messages
-
Hi Experts,
I'm having a problem with decimal.
I have a alv data grid that can be edited.Once I press enter the value for the decimal fields are changed.
Example: If i input 5.00 in the field then I press enter it converts it to 0.05
And If I input 2.01 in the field it shows an error Too many decimal places(Maximum 0)
DATA INPUT for my internal table:
DATA: BEGIN OF it_data OCCURS 0,
docno LIKE zit_haul_line-docno,
line LIKE zit_haul_line-line,
eqpno LIKE zit_haul_line-eqpno,
rpt LIKE zit_haul_line-rpt,
notrip LIKE zit_haul_line-notrip,
trc LIKE zit_haul_line-trc,
escfee LIKE zit_haul_line-escfee,
tollfee LIKE zit_haul_line-tollfee,
repr LIKE zit_haul_line-repr,
others LIKE zit_haul_line-others,
tba LIKE zit_haul_line-tba,
dik LIKE zit_haul_line-dik,
locorg LIKE zit_haul_line-locorg,
locdes LIKE zit_haul_line-locdes,
END OF it_data.
DATA: wa_data LIKE it_data.
Here is my code in change ALV Change.
FORM data_changed USING ir_data_changed TYPE REF TO cl_alv_changed_data_protocol.
DATA ls_modi TYPE lvc_s_modi.
DATA: ratepertrip LIKE zit_haul_line-rpt,
nooftrip LIKE zit_haul_line-notrip,
lv_value TYPE lvc_value ,
totalrent LIKE zit_haul_line-trc,
escortfee LIKE zit_haul_line-escfee,
tollfee LIKE zit_haul_line-tollfee,
represent LIKE zit_haul_line-repr,
others LIKE zit_haul_line-others,
lv_value1 TYPE lvc_value,
totalbill LIKE zit_haul_line-tba.
DATA: eqpno LIKE equi-equnr,
gv_equnr LIKE equi-equnr.
* Check each modification:
LOOP AT ir_data_changed->mt_mod_cells INTO ls_modi.
CASE ls_modi-fieldname.
WHEN 'EQPNO'.
CONDENSE ls_modi-value.
SELECT SINGLE equnr
INTO gv_equnr
FROM equi
WHERE equnr EQ ls_modi-value.
IF sy-subrc NE 0.
CALL METHOD ir_data_changed->add_protocol_entry
EXPORTING
i_msgid = '00'
i_msgty = 'E'
i_msgno = '398'
i_msgv1 = 'Equipment Number does not exist:'
i_msgv2 = ls_modi-value
i_msgv3 = ''
i_msgv4 = ''
i_fieldname = ls_modi-fieldname
i_row_id = ls_modi-row_id.
ENDIF.
ENDCASE.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'RPT'
IMPORTING e_value = ratepertrip.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'NOTRIP'
IMPORTING e_value = nooftrip.
CLEAR totalrent.
ls_modi-fieldname = 'TRC'.
IF ratepertrip = ''.
ratepertrip = 1.
ELSEIF nooftrip = ''.
nooftrip = 1.
ENDIF.
totalrent = ratepertrip * nooftrip.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalrent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'ESCFEE'
IMPORTING e_value = escortfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'TOLLFEE'
IMPORTING e_value = tollfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'REPR'
IMPORTING e_value = represent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'OTHERS'
IMPORTING e_value = others.
CLEAR totalbill.
ls_modi-fieldname = 'TBA'.
totalbill = escortfee + tollfee + represent + others.
totalbill = totalrent + totalbill.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalbill.
ENDLOOP.
ENDFORM. "data_changedHi,
Can you check my code. I've tried changing the data types of my internal table and my output is stll same when I press enter.
The output should be 2.00 3.00 5.00 7.00
Also if I enter 12345.00 the output should be 12,345.00.
Thank you so much for the help.
* ALV required data objects.
TYPE-POOLS: sdydo, icon, slis.
DATA: w_title TYPE lvc_title,
w_repid TYPE sy-repid,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
ls_events TYPE LINE OF slis_t_event,
t_events TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
x_sort type LINE OF slis_t_sortinfo_alv,
t_sort TYPE slis_t_sortinfo_alv,
ls_heading TYPE slis_listheader,
t_heading TYPE slis_t_listheader,
ls_fieldcat TYPE slis_fieldcat_alv,
gs_variant LIKE disvariant,
gt_events TYPE slis_t_event,
gs_events TYPE slis_alv_event.
DATA:
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
TYPES: BEGIN OF t_header,
line01(555) TYPE c,
line02(555) TYPE c,
END OF t_header.
DATA: is_print TYPE slis_print_alv,
gset TYPE lvc_s_glay,
%runmode TYPE aqlimode.
data: it_sortcat type slis_sortinfo_alv occurs 1.
DATA: gw_header TYPE t_header.
" END OF ALV DATA
"========================================================================================================================
DATA: BEGIN OF it_data OCCURS 0,
docno LIKE zit_haul_line-docno,
line LIKE zit_haul_line-line,
eqpno LIKE zit_haul_line-eqpno,
rpt TYPE p DECIMALS 2, "LIKE zit_haul_line-rpt,
notrip TYPE p DECIMALS 2,
trc TYPE p DECIMALS 2,
escfee TYPE p DECIMALS 2,
tollfee TYPE p DECIMALS 2,
repr TYPE p DECIMALS 2,
others TYPE p DECIMALS 2,
tba TYPE p DECIMALS 2,
dik LIKE zit_haul_line-dik,
locorg LIKE zit_haul_line-locorg,
locdes LIKE zit_haul_line-locdes,
END OF it_data.
DATA: wa_data LIKE it_data.
DATA: it_modified TYPE STANDARD TABLE OF zit_haul_line WITH HEADER LINE.
DATA: wa_modified TYPE STANDARD TABLE OF zit_haul_line WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: r_create RADIOBUTTON GROUP rad1 USER-COMMAND a DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: r_proj RADIOBUTTON GROUP rad2 MODIF ID A.
PARAMETERS: r_cost RADIOBUTTON GROUP rad2 MODIF ID A.
SELECTION-SCREEN END OF BLOCK b2.
PARAMETERS: r_post RADIOBUTTON GROUP rad1.
PARAMETERS: r_rev RADIOBUTTON GROUP rad1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
PARAMETERS: p_docno LIKE mseg-belnr MODIF ID B,
p_post LIKE sy-datum MODIF ID B.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME.
PARAMETERS: p_trand LIKE sy-datum,
p_cost LIKE csks-kostl,
p_proj TYPE string,
p_wbs TYPE string,
p_nwa TYPE string.
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF r_create = 'X'.
IF screen-group1 = 'A'.
screen-active = 1.
ENDIF.
ELSE.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
IF r_post = 'X' OR r_rev = 'X'.
IF screen-group1 = 'B'.
screen-active = 1.
ENDIF.
ELSE.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
START-OF-SELECTION.
PERFORM get_data.
PERFORM display_report.
FORM get_data.
it_data-line = '001'.
APPEND it_data.
it_data-line = '002'.
APPEND it_data.
it_data-line = '003'.
APPEND it_data.
it_data-line = '004'.
APPEND it_data.
it_data-line = '005'.
APPEND it_data.
it_data-line = '006'.
APPEND it_data.
it_data-line = '007'.
APPEND it_data.
it_data-line = '008'.
APPEND it_data.
it_data-line = '009'.
APPEND it_data.
it_data-line = '010'.
APPEND it_data.
ENDFORM.
"ALV DISPLAY ====================================================================================================================================
"& Form PF_WRITE_FIELDCAT
*& Form pf_write_fieldcat
* text
* -->FNAME text
* -->TNAME text
* -->TEXT text
* -->LEN text
FORM pf_write_fieldcat USING fname
tname
text
len
edt.
* key
* sum.
ls_fieldcat-fieldname = fname.
ls_fieldcat-tabname = tname.
ls_fieldcat-seltext_l = text.
ls_fieldcat-outputlen = len.
* ls_fieldcat-key = key.
* ls_fieldcat-do_sum = sum.
ls_fieldcat-edit = edt.
IF len = '0'.
ls_fieldcat-outputlen = '1'.
ls_fieldcat-no_out = 'X'.
ENDIF.
APPEND ls_fieldcat TO t_fieldcat.
CLEAR ls_fieldcat.
* To set ENTER Event!
gs_events-name = 'CALLER_EXIT'.
gs_events-form = 'CALLER_EXIT'.
APPEND gs_events TO gt_events.
* To change the ALV Changed Protocoll
gs_events-name = 'DATA_CHANGED'.
gs_events-form = 'DATA_CHANGED'.
APPEND gs_events TO gt_events.
ENDFORM. " PF_WRITE_FIELDCAT
*& Form display_report
FORM display_report.
is_print-no_print_selinfos = 'X'.
is_print-no_print_listinfos = 'X'.
is_print-print_ctrl = 'X'.
PERFORM pf_write_fieldcat USING:
* 'DOCNO' 'IT_DATA' 'Line' ' ' '',
'LINE' 'IT_DATA' 'Line' ' ' '',
'EQPNO' 'IT_DATA' 'Equipment No.' ' ' 'X',
'RPT' 'IT_DATA' 'Rate per Trip' ' ' 'X',
'NOTRIP' 'IT_DATA' 'No of Trip' ' ' 'X',
'TRC' 'IT_DATA' 'Total Rental Charges' ' ' '',
'ESCFEE' 'IT_DATA' 'Escort Fee' ' ' 'X',
'TOLLFEE' 'IT_DATA' 'Toll Fee' ' ' 'X',
'REPR' 'IT_DATA' 'Representation' ' ' 'X',
'OTHERS' 'IT_DATA' 'Others' ' ' 'X',
'TBA' 'IT_DATA' 'Total Billable Amount' ' ' '',
'DIK' 'IT_DATA' 'Distance in KM' ' ' 'X',
'LOCORG' 'IT_DATA' 'Location Origin' ' ' 'X',
'LOCDES' 'IT_DATA' 'Location Destination' ' ' 'X'.
* Layout
x_layout-zebra = 'X'.
x_layout-no_keyfix = ' '.
x_layout-colwidth_optimize = 'X'.
* GUI Status
w_status = 'SET_PF_STATUS'.
w_repid = sy-repid.
* User commands
w_comm = 'USER_COMMAND'.
* gs_variant-variant = p_var1.
* gs_variant-handle = space.
* gs_variant-report = sy-repid.
gs_variant-report = sy-repid.
gs_variant-username = sy-uname.
gset-no_colwopt = 'X'.
* Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
"it_sort = t_sort
it_sort = it_sortcat
* i_callback_pf_status_set = w_status
"i_callback_user_command = w_comm
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
* i_callback_html_top_of_page = 'TOP_OF_PAGE'
i_callback_top_of_page = 'TOP-OF-PAGE'
* i_callback_html_end_of_list = 'END-OF-PAGE'
is_variant = gs_variant
i_save = 'A'
is_print = is_print
it_events = gt_events
* i_grid_title = w_title
TABLES
t_outtab = IT_DATA
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " display_report
FORM data_changed USING ir_data_changed TYPE REF TO cl_alv_changed_data_protocol.
DATA ls_modi TYPE lvc_s_modi.
DATA: ratepertrip LIKE zit_haul_line-rpt,
nooftrip LIKE zit_haul_line-notrip,
lv_value TYPE lvc_value ,
totalrent LIKE zit_haul_line-trc,
escortfee LIKE zit_haul_line-escfee,
tollfee LIKE zit_haul_line-tollfee,
represent LIKE zit_haul_line-repr,
others LIKE zit_haul_line-others,
lv_value1 TYPE lvc_value,
totalbill LIKE zit_haul_line-tba.
DATA: eqpno LIKE equi-equnr,
gv_equnr LIKE equi-equnr.
* Check each modification:
LOOP AT ir_data_changed->mt_mod_cells INTO ls_modi.
CASE ls_modi-fieldname.
WHEN 'EQPNO'.
CONDENSE ls_modi-value.
SELECT SINGLE equnr
INTO gv_equnr
FROM equi
WHERE equnr EQ ls_modi-value.
IF sy-subrc NE 0.
CALL METHOD ir_data_changed->add_protocol_entry
EXPORTING
i_msgid = '00'
i_msgty = 'E'
i_msgno = '398'
i_msgv1 = 'Equipment Number does not exist:'
i_msgv2 = ls_modi-value
i_msgv3 = ''
i_msgv4 = ''
i_fieldname = ls_modi-fieldname
i_row_id = ls_modi-row_id.
ENDIF.
ENDCASE.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'RPT'
IMPORTING e_value = ratepertrip.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'NOTRIP'
IMPORTING e_value = nooftrip.
CLEAR totalrent.
ls_modi-fieldname = 'TRC'.
IF ratepertrip = ''.
ratepertrip = 1.
ELSEIF nooftrip = ''.
nooftrip = 1.
ENDIF.
totalrent = ratepertrip * nooftrip.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalrent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'ESCFEE'
IMPORTING e_value = escortfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'TOLLFEE'
IMPORTING e_value = tollfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'REPR'
IMPORTING e_value = represent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'OTHERS'
IMPORTING e_value = others.
CLEAR totalbill.
ls_modi-fieldname = 'TBA'.
totalbill = escortfee + tollfee + represent + others.
totalbill = totalrent + totalbill.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalbill.
ENDLOOP.
ENDFORM. "data_changed
FORM caller_exit USING is_data TYPE slis_data_caller_exit.
* Switch to OO_ALV:
DATA: lr_alv TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lr_alv.
* Register ENTER as edit event:
CALL METHOD lr_alv->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
* pls. use MC_EVT_MODIFIED if leaving the cell should trigger the edit event!
ENDFORM. "CALLER_EXIT
*& Form TOP-OF-PAGE
* text
FORM top-of-page.
*ALV Header declarations
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c.
DATA: text TYPE sdydo_text_element,
a_right TYPE REF TO cl_dd_area.
DATA: tran TYPE string,
send TYPE string,
wbs TYPE string,
nwa TYPE string.
text = 'Create Hauling Charges for Project'.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Transaction Date: ' p_trand INTO tran SEPARATED BY space.
text = tran.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Sender Cost Center: ' p_cost INTO send SEPARATED BY space.
text = send.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Receiver WBS: ' p_wbs INTO wbs SEPARATED BY space.
text = wbs.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Receiver Network and NWA: ' p_nwa INTO nwa SEPARATED BY space.
text = nwa.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
ENDFORM. "top-of-page
FORM pf_set_top_page_heading USING typ
key
info.
ls_heading-typ = typ.
ls_heading-key = key.
ls_heading-info = info.
APPEND ls_heading TO t_heading.
ENDFORM. " PF_SET_TOP_PAGE_HEADING
*& Form PF_SET_TOP_PAGE_EVENTS
FORM pf_set_top_page_events USING name
form.
ls_events-name = name.
ls_events-form = form.
APPEND ls_events TO t_events.
CLEAR ls_events.
ENDFORM. " PF_SET_TOP_PAGE_EVENTS
*& Form REUSE_ALV_GET_VARIANT
FORM reuse_alv_get_variant
USING value(iv_repid) TYPE sy-repid
value(iv_handle) TYPE slis_handl
CHANGING iv_variant TYPE disvariant-variant.
DATA: lv_exit(1) TYPE c,
ls_variant TYPE disvariant. " Structure for Variant
MOVE: iv_variant TO ls_variant-variant,
iv_handle TO ls_variant-handle,
iv_repid TO ls_variant-report.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
IMPORTING
e_exit = lv_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lv_exit = space.
MOVE ls_variant-variant TO iv_variant.
ENDIF.
ENDFORM. " REUSE_ALV_GET_VARIANT "
FORM user_command USING w_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE w_ucomm.
WHEN '&DATA_SAVE'.
* READ TABLE it_data INTO wa_data." INDEX rs_selfield-tabindex.
DELETE it_data WHERE eqpno IS INITIAL.
LOOP AT it_data INTO wa_data.
CONDENSE wa_data-eqpno.
MOVE-CORRESPONDING wa_data TO wa_modified.
APPEND wa_modified TO it_modified.
ENDLOOP.
MODIFY zit_haul_line FROM TABLE it_modified.
ENDCASE.
ENDFORM. "user_command -
Problem with decimal point in Korea and Japan
Hi all,
I have one problem with decimal points.
I need to change in my out put cuurency values as per japan or korea standards.
Please help me is there any function module for this one.
program using alv grid display.
i use write statement but it is not working. Because
data: L_AMT type glpca-hsl,
G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.
here i need to do
L_AMT = G_AMT. "" going to runtime error.
if i taken like
data: L_AMT TYPE CHAR15,
G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT. "" it is not working
Regards
marganiHello,
This is pretty basic, whenever you've currency & quantity fields you need to pass the corres. reference fields.
In your case you need to populate the cfieldname & ctabname fields of the FieldCat.
BR,
Suhas -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?
Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support -
Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.
-
Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.The language of my Keyboard is French
-
Problem with iWeb 09, after the publication in a local file.
*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file. -
I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?
Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
Chart - problem with realize one of the function under CR XI
Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
year ,
month
Second query
"SELECT
year + FLOOR({month + offset} % 13),
{month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you. -
When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
In i-Movie there is no problem with this film, but the problem begins by exporting to iDVD and making there a project.
Who can help me, then I cann't find everything about this in any forum?Hi
Can be a problem that get multiplied and visible when iDVD encode for DVD.
A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
C. Does this problem arises what ever encoding quality You use ?
Yours Bengt W -
Problem with InDesign CC redrawing the screen too slow while using Zoom tool
Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).
Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally. -
Problem with LILO to loading the OS
Hello everyone.
We have a problem with LILO to loading the OS in a CS-MARS 110R, find attached a screenshot.
The only solution is recovery the MARS Operating System.
Thanks in advance.
Regards
AntonioHi Matthew.
The re-image was impossible because this CS-MARS didn´t read the DVD correctly (hardware error) and we asked to Cisco a RMA.
Thanks
Antonio
Maybe you are looking for
-
I can't freeze a clip and make it a still for a period of time
-
hi, i have been trying to create the collaboration through administrator but it's not appearing. when i created through other user it's appearing, so i would like to know what are the things do i need required to work it out for administrator. please
-
Hi, I'm new to htmldb. my default language of OS is Simplified Chinese. NLS_lang of db home is American_america.utf8. after installing HTMLDB(I noticed chinese is not install into the db), i tried to build a form with a date field. in the running for
-
I have the most current version of itunes, ever since downloading have had a problem syncing my music. I make/adjust playlists on my mac and then go to sync to my phone, instead of changing to the new playlist, it reverts back to the old one that is
-
Paper does not fit in paper tray
I just received my PIXMA MG7120 and it seems as though my paper tray is too small. No matter how much i try the width and length is not adequate to fit standard 8.5 x 11 paper. The measurement of the tray sent to me is: 8" wide from paper guide to