Problem with decimal values
Hi
I need to store a very long decimal value. something like
0.123456789012 in to the SQL data base.
However after doing some calculations , my value is trim to
0.12345
float value = v1 v2v3;
v1 is long and v2 is a float and v3 is in double.
anyone noes y? I need the value to be in full lenght (as in all the numbers after the decimal point).
many thanks !
yan
but my SQL database is designed to store float
value.
I haf no control of the SQL database..Don't assume that float in the SQL database is the same as float in Java code.
SQL-Server 2000's float is the same as a Java double. Depending on the RDBMS you are using, the same words may have a different meaning between the RDBMS and Java
Similar Messages
-
Hi Experts,
I'm having a problem with decimal.
I have a alv data grid that can be edited.Once I press enter the value for the decimal fields are changed.
Example: If i input 5.00 in the field then I press enter it converts it to 0.05
And If I input 2.01 in the field it shows an error Too many decimal places(Maximum 0)
DATA INPUT for my internal table:
DATA: BEGIN OF it_data OCCURS 0,
docno LIKE zit_haul_line-docno,
line LIKE zit_haul_line-line,
eqpno LIKE zit_haul_line-eqpno,
rpt LIKE zit_haul_line-rpt,
notrip LIKE zit_haul_line-notrip,
trc LIKE zit_haul_line-trc,
escfee LIKE zit_haul_line-escfee,
tollfee LIKE zit_haul_line-tollfee,
repr LIKE zit_haul_line-repr,
others LIKE zit_haul_line-others,
tba LIKE zit_haul_line-tba,
dik LIKE zit_haul_line-dik,
locorg LIKE zit_haul_line-locorg,
locdes LIKE zit_haul_line-locdes,
END OF it_data.
DATA: wa_data LIKE it_data.
Here is my code in change ALV Change.
FORM data_changed USING ir_data_changed TYPE REF TO cl_alv_changed_data_protocol.
DATA ls_modi TYPE lvc_s_modi.
DATA: ratepertrip LIKE zit_haul_line-rpt,
nooftrip LIKE zit_haul_line-notrip,
lv_value TYPE lvc_value ,
totalrent LIKE zit_haul_line-trc,
escortfee LIKE zit_haul_line-escfee,
tollfee LIKE zit_haul_line-tollfee,
represent LIKE zit_haul_line-repr,
others LIKE zit_haul_line-others,
lv_value1 TYPE lvc_value,
totalbill LIKE zit_haul_line-tba.
DATA: eqpno LIKE equi-equnr,
gv_equnr LIKE equi-equnr.
* Check each modification:
LOOP AT ir_data_changed->mt_mod_cells INTO ls_modi.
CASE ls_modi-fieldname.
WHEN 'EQPNO'.
CONDENSE ls_modi-value.
SELECT SINGLE equnr
INTO gv_equnr
FROM equi
WHERE equnr EQ ls_modi-value.
IF sy-subrc NE 0.
CALL METHOD ir_data_changed->add_protocol_entry
EXPORTING
i_msgid = '00'
i_msgty = 'E'
i_msgno = '398'
i_msgv1 = 'Equipment Number does not exist:'
i_msgv2 = ls_modi-value
i_msgv3 = ''
i_msgv4 = ''
i_fieldname = ls_modi-fieldname
i_row_id = ls_modi-row_id.
ENDIF.
ENDCASE.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'RPT'
IMPORTING e_value = ratepertrip.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'NOTRIP'
IMPORTING e_value = nooftrip.
CLEAR totalrent.
ls_modi-fieldname = 'TRC'.
IF ratepertrip = ''.
ratepertrip = 1.
ELSEIF nooftrip = ''.
nooftrip = 1.
ENDIF.
totalrent = ratepertrip * nooftrip.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalrent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'ESCFEE'
IMPORTING e_value = escortfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'TOLLFEE'
IMPORTING e_value = tollfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'REPR'
IMPORTING e_value = represent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'OTHERS'
IMPORTING e_value = others.
CLEAR totalbill.
ls_modi-fieldname = 'TBA'.
totalbill = escortfee + tollfee + represent + others.
totalbill = totalrent + totalbill.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalbill.
ENDLOOP.
ENDFORM. "data_changedHi,
Can you check my code. I've tried changing the data types of my internal table and my output is stll same when I press enter.
The output should be 2.00 3.00 5.00 7.00
Also if I enter 12345.00 the output should be 12,345.00.
Thank you so much for the help.
* ALV required data objects.
TYPE-POOLS: sdydo, icon, slis.
DATA: w_title TYPE lvc_title,
w_repid TYPE sy-repid,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
ls_events TYPE LINE OF slis_t_event,
t_events TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
x_sort type LINE OF slis_t_sortinfo_alv,
t_sort TYPE slis_t_sortinfo_alv,
ls_heading TYPE slis_listheader,
t_heading TYPE slis_t_listheader,
ls_fieldcat TYPE slis_fieldcat_alv,
gs_variant LIKE disvariant,
gt_events TYPE slis_t_event,
gs_events TYPE slis_alv_event.
DATA:
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
TYPES: BEGIN OF t_header,
line01(555) TYPE c,
line02(555) TYPE c,
END OF t_header.
DATA: is_print TYPE slis_print_alv,
gset TYPE lvc_s_glay,
%runmode TYPE aqlimode.
data: it_sortcat type slis_sortinfo_alv occurs 1.
DATA: gw_header TYPE t_header.
" END OF ALV DATA
"========================================================================================================================
DATA: BEGIN OF it_data OCCURS 0,
docno LIKE zit_haul_line-docno,
line LIKE zit_haul_line-line,
eqpno LIKE zit_haul_line-eqpno,
rpt TYPE p DECIMALS 2, "LIKE zit_haul_line-rpt,
notrip TYPE p DECIMALS 2,
trc TYPE p DECIMALS 2,
escfee TYPE p DECIMALS 2,
tollfee TYPE p DECIMALS 2,
repr TYPE p DECIMALS 2,
others TYPE p DECIMALS 2,
tba TYPE p DECIMALS 2,
dik LIKE zit_haul_line-dik,
locorg LIKE zit_haul_line-locorg,
locdes LIKE zit_haul_line-locdes,
END OF it_data.
DATA: wa_data LIKE it_data.
DATA: it_modified TYPE STANDARD TABLE OF zit_haul_line WITH HEADER LINE.
DATA: wa_modified TYPE STANDARD TABLE OF zit_haul_line WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: r_create RADIOBUTTON GROUP rad1 USER-COMMAND a DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: r_proj RADIOBUTTON GROUP rad2 MODIF ID A.
PARAMETERS: r_cost RADIOBUTTON GROUP rad2 MODIF ID A.
SELECTION-SCREEN END OF BLOCK b2.
PARAMETERS: r_post RADIOBUTTON GROUP rad1.
PARAMETERS: r_rev RADIOBUTTON GROUP rad1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
PARAMETERS: p_docno LIKE mseg-belnr MODIF ID B,
p_post LIKE sy-datum MODIF ID B.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME.
PARAMETERS: p_trand LIKE sy-datum,
p_cost LIKE csks-kostl,
p_proj TYPE string,
p_wbs TYPE string,
p_nwa TYPE string.
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF r_create = 'X'.
IF screen-group1 = 'A'.
screen-active = 1.
ENDIF.
ELSE.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
IF r_post = 'X' OR r_rev = 'X'.
IF screen-group1 = 'B'.
screen-active = 1.
ENDIF.
ELSE.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
START-OF-SELECTION.
PERFORM get_data.
PERFORM display_report.
FORM get_data.
it_data-line = '001'.
APPEND it_data.
it_data-line = '002'.
APPEND it_data.
it_data-line = '003'.
APPEND it_data.
it_data-line = '004'.
APPEND it_data.
it_data-line = '005'.
APPEND it_data.
it_data-line = '006'.
APPEND it_data.
it_data-line = '007'.
APPEND it_data.
it_data-line = '008'.
APPEND it_data.
it_data-line = '009'.
APPEND it_data.
it_data-line = '010'.
APPEND it_data.
ENDFORM.
"ALV DISPLAY ====================================================================================================================================
"& Form PF_WRITE_FIELDCAT
*& Form pf_write_fieldcat
* text
* -->FNAME text
* -->TNAME text
* -->TEXT text
* -->LEN text
FORM pf_write_fieldcat USING fname
tname
text
len
edt.
* key
* sum.
ls_fieldcat-fieldname = fname.
ls_fieldcat-tabname = tname.
ls_fieldcat-seltext_l = text.
ls_fieldcat-outputlen = len.
* ls_fieldcat-key = key.
* ls_fieldcat-do_sum = sum.
ls_fieldcat-edit = edt.
IF len = '0'.
ls_fieldcat-outputlen = '1'.
ls_fieldcat-no_out = 'X'.
ENDIF.
APPEND ls_fieldcat TO t_fieldcat.
CLEAR ls_fieldcat.
* To set ENTER Event!
gs_events-name = 'CALLER_EXIT'.
gs_events-form = 'CALLER_EXIT'.
APPEND gs_events TO gt_events.
* To change the ALV Changed Protocoll
gs_events-name = 'DATA_CHANGED'.
gs_events-form = 'DATA_CHANGED'.
APPEND gs_events TO gt_events.
ENDFORM. " PF_WRITE_FIELDCAT
*& Form display_report
FORM display_report.
is_print-no_print_selinfos = 'X'.
is_print-no_print_listinfos = 'X'.
is_print-print_ctrl = 'X'.
PERFORM pf_write_fieldcat USING:
* 'DOCNO' 'IT_DATA' 'Line' ' ' '',
'LINE' 'IT_DATA' 'Line' ' ' '',
'EQPNO' 'IT_DATA' 'Equipment No.' ' ' 'X',
'RPT' 'IT_DATA' 'Rate per Trip' ' ' 'X',
'NOTRIP' 'IT_DATA' 'No of Trip' ' ' 'X',
'TRC' 'IT_DATA' 'Total Rental Charges' ' ' '',
'ESCFEE' 'IT_DATA' 'Escort Fee' ' ' 'X',
'TOLLFEE' 'IT_DATA' 'Toll Fee' ' ' 'X',
'REPR' 'IT_DATA' 'Representation' ' ' 'X',
'OTHERS' 'IT_DATA' 'Others' ' ' 'X',
'TBA' 'IT_DATA' 'Total Billable Amount' ' ' '',
'DIK' 'IT_DATA' 'Distance in KM' ' ' 'X',
'LOCORG' 'IT_DATA' 'Location Origin' ' ' 'X',
'LOCDES' 'IT_DATA' 'Location Destination' ' ' 'X'.
* Layout
x_layout-zebra = 'X'.
x_layout-no_keyfix = ' '.
x_layout-colwidth_optimize = 'X'.
* GUI Status
w_status = 'SET_PF_STATUS'.
w_repid = sy-repid.
* User commands
w_comm = 'USER_COMMAND'.
* gs_variant-variant = p_var1.
* gs_variant-handle = space.
* gs_variant-report = sy-repid.
gs_variant-report = sy-repid.
gs_variant-username = sy-uname.
gset-no_colwopt = 'X'.
* Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
"it_sort = t_sort
it_sort = it_sortcat
* i_callback_pf_status_set = w_status
"i_callback_user_command = w_comm
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
* i_callback_html_top_of_page = 'TOP_OF_PAGE'
i_callback_top_of_page = 'TOP-OF-PAGE'
* i_callback_html_end_of_list = 'END-OF-PAGE'
is_variant = gs_variant
i_save = 'A'
is_print = is_print
it_events = gt_events
* i_grid_title = w_title
TABLES
t_outtab = IT_DATA
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " display_report
FORM data_changed USING ir_data_changed TYPE REF TO cl_alv_changed_data_protocol.
DATA ls_modi TYPE lvc_s_modi.
DATA: ratepertrip LIKE zit_haul_line-rpt,
nooftrip LIKE zit_haul_line-notrip,
lv_value TYPE lvc_value ,
totalrent LIKE zit_haul_line-trc,
escortfee LIKE zit_haul_line-escfee,
tollfee LIKE zit_haul_line-tollfee,
represent LIKE zit_haul_line-repr,
others LIKE zit_haul_line-others,
lv_value1 TYPE lvc_value,
totalbill LIKE zit_haul_line-tba.
DATA: eqpno LIKE equi-equnr,
gv_equnr LIKE equi-equnr.
* Check each modification:
LOOP AT ir_data_changed->mt_mod_cells INTO ls_modi.
CASE ls_modi-fieldname.
WHEN 'EQPNO'.
CONDENSE ls_modi-value.
SELECT SINGLE equnr
INTO gv_equnr
FROM equi
WHERE equnr EQ ls_modi-value.
IF sy-subrc NE 0.
CALL METHOD ir_data_changed->add_protocol_entry
EXPORTING
i_msgid = '00'
i_msgty = 'E'
i_msgno = '398'
i_msgv1 = 'Equipment Number does not exist:'
i_msgv2 = ls_modi-value
i_msgv3 = ''
i_msgv4 = ''
i_fieldname = ls_modi-fieldname
i_row_id = ls_modi-row_id.
ENDIF.
ENDCASE.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'RPT'
IMPORTING e_value = ratepertrip.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'NOTRIP'
IMPORTING e_value = nooftrip.
CLEAR totalrent.
ls_modi-fieldname = 'TRC'.
IF ratepertrip = ''.
ratepertrip = 1.
ELSEIF nooftrip = ''.
nooftrip = 1.
ENDIF.
totalrent = ratepertrip * nooftrip.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalrent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'ESCFEE'
IMPORTING e_value = escortfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'TOLLFEE'
IMPORTING e_value = tollfee.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'REPR'
IMPORTING e_value = represent.
CALL METHOD ir_data_changed->get_cell_value
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = 'OTHERS'
IMPORTING e_value = others.
CLEAR totalbill.
ls_modi-fieldname = 'TBA'.
totalbill = escortfee + tollfee + represent + others.
totalbill = totalrent + totalbill.
CALL METHOD ir_data_changed->modify_cell
EXPORTING i_row_id = ls_modi-row_id
i_fieldname = ls_modi-fieldname
i_value = totalbill.
ENDLOOP.
ENDFORM. "data_changed
FORM caller_exit USING is_data TYPE slis_data_caller_exit.
* Switch to OO_ALV:
DATA: lr_alv TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lr_alv.
* Register ENTER as edit event:
CALL METHOD lr_alv->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
* pls. use MC_EVT_MODIFIED if leaving the cell should trigger the edit event!
ENDFORM. "CALLER_EXIT
*& Form TOP-OF-PAGE
* text
FORM top-of-page.
*ALV Header declarations
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c.
DATA: text TYPE sdydo_text_element,
a_right TYPE REF TO cl_dd_area.
DATA: tran TYPE string,
send TYPE string,
wbs TYPE string,
nwa TYPE string.
text = 'Create Hauling Charges for Project'.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Transaction Date: ' p_trand INTO tran SEPARATED BY space.
text = tran.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Sender Cost Center: ' p_cost INTO send SEPARATED BY space.
text = send.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Receiver WBS: ' p_wbs INTO wbs SEPARATED BY space.
text = wbs.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CONCATENATE 'Receiver Network and NWA: ' p_nwa INTO nwa SEPARATED BY space.
text = nwa.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO t_header.
CLEAR: wa_header.
gw_header-line01 = text.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
ENDFORM. "top-of-page
FORM pf_set_top_page_heading USING typ
key
info.
ls_heading-typ = typ.
ls_heading-key = key.
ls_heading-info = info.
APPEND ls_heading TO t_heading.
ENDFORM. " PF_SET_TOP_PAGE_HEADING
*& Form PF_SET_TOP_PAGE_EVENTS
FORM pf_set_top_page_events USING name
form.
ls_events-name = name.
ls_events-form = form.
APPEND ls_events TO t_events.
CLEAR ls_events.
ENDFORM. " PF_SET_TOP_PAGE_EVENTS
*& Form REUSE_ALV_GET_VARIANT
FORM reuse_alv_get_variant
USING value(iv_repid) TYPE sy-repid
value(iv_handle) TYPE slis_handl
CHANGING iv_variant TYPE disvariant-variant.
DATA: lv_exit(1) TYPE c,
ls_variant TYPE disvariant. " Structure for Variant
MOVE: iv_variant TO ls_variant-variant,
iv_handle TO ls_variant-handle,
iv_repid TO ls_variant-report.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
IMPORTING
e_exit = lv_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lv_exit = space.
MOVE ls_variant-variant TO iv_variant.
ENDIF.
ENDFORM. " REUSE_ALV_GET_VARIANT "
FORM user_command USING w_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE w_ucomm.
WHEN '&DATA_SAVE'.
* READ TABLE it_data INTO wa_data." INDEX rs_selfield-tabindex.
DELETE it_data WHERE eqpno IS INITIAL.
LOOP AT it_data INTO wa_data.
CONDENSE wa_data-eqpno.
MOVE-CORRESPONDING wa_data TO wa_modified.
APPEND wa_modified TO it_modified.
ENDLOOP.
MODIFY zit_haul_line FROM TABLE it_modified.
ENDCASE.
ENDFORM. "user_command -
Problem with decimal point in Korea and Japan
Hi all,
I have one problem with decimal points.
I need to change in my out put cuurency values as per japan or korea standards.
Please help me is there any function module for this one.
program using alv grid display.
i use write statement but it is not working. Because
data: L_AMT type glpca-hsl,
G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.
here i need to do
L_AMT = G_AMT. "" going to runtime error.
if i taken like
data: L_AMT TYPE CHAR15,
G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT. "" it is not working
Regards
marganiHello,
This is pretty basic, whenever you've currency & quantity fields you need to pass the corres. reference fields.
In your case you need to populate the cfieldname & ctabname fields of the FieldCat.
BR,
Suhas -
Hi Experts,
I have a problem with offset values. I have create a variable on OFISCPER, it's characteristic value, indivdual value, mandatory and ready for the input. I need to show the varibel period and the l previous period and so on till 12 periods. I used the offset values (-1, -2, etc.) but when I execute the query I can show just the variable period and the period previous I don`t see. The query is based on multiprovider and don´t has filters. Can anyone help me?Leonel,
You may nt need to have 12 columns in the query designer.
You could include the keyfigure and restrict it to the variable and create the offset for the 12 periods
Check this http://help.sap.com/saphelp_nw04/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
-Doodle -
LOV Problem with multiple values
HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...duplicate of {thread:id=2286814}
-
Problems with decimal places and formatting
Hi , we are having problems with an add on running on different localization companies. Decimal places separatd by "," differ from other localizations. We dont know if this is a SQL collation setting or somethng related to code or requirements to run add ons on different servers and languages.
Any ideas??
ThanksHello
Follow up with this thread:
[Re: How to get the numeric value of DocTotal from UI API]
Regards,
J. -
Problem with decimal fields using BADI For PD Infotypes
Hi,
I'm implementing BADI HRBAS00INFTY.
For reading the fields of infotype , I'm using the substring
of the field NEW_INNNN-VDATA .
I have a problem with fields of type DEC.
In field NEW_INNNN-VDATA it looks like this : '####'
I believe that the possible reason for this is conversion from DEC to CHAR
But I don't know how to fix it.
Thank you .
Message was edited by: Alon LozinskyHi Alon,
We had same issue. Use following code.
data: hri1011_str type hri1011.
move new_innnn-vdata to hri1011_str.
HRI1011_STR fields will have decimal values.
Let me know if you still have any issues. If solution works, kindly do Point Recognition.
-Bharat -
Hi,
I can't find the answer to my problem :
I'm on Indesign CS4 (french) and Windows XP. Constantly, without no (obvious) reason, the fields x, y, height and width (top left) suddenly doesn't take decimal values anymore.
It drives me crazy!
I work for a printer, I daily use Indesign so it's important.
Apparently, the problem disappear when i restart the soft.
I tried with point and decimal point,
I tried to change one number when the value is already a decimal,
I checked my keyboard (AZERTY),
but nothing at all….
Each time, the soft display "Valeur numerique incorrect" (Incorrect numeric value).
Did someone already had this problem ? An even more important, does anyone have a solution?
Hope you can help.
THXAre you using the correct separator for the decimal (comma vs dot -- not sure which would be right for you), and are the files all French in origin (not sure tht matters).
Check the Language settings in Windows under regional settings, and diable the keyboard shortcut to switch languages if you have multiple languages installed. That screws things up all the time becasue the OS interprests one of the common ID shorcuts as a call to switch languages.
You might also want to trash your prefs. See Replace Your Preferences -
Facing Problem with passing Values from One report to another
Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help.sorry for the late updation.
My First Report, Summary level is a Pivot Table.
I tried the same report with Table option, the value is passing correctly.
Is there a way to get rid of this situation using Pivot table.
Thanks for your help.
below is the original request.
Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help. -
Problem with checkbox value and app.settings.getSetting()
Hello everyone.
I`ve got a problem with getting saved settings for checkbox.
Saved settings doesn`t apply on checkbox value.
It`s strange, but it always "true".
So here piece of code:
checkMe = 11; //any value for the first time running
if (app.settings.haveSetting("savea", "chck")) {
checkMe = app.settings.getSetting("savea", "chck"); // get saved value, else 11
alert("checkMe = "+checkMe)
if(checkMe == 11){
checkMe= false; //if there is no saved settings, checkbox value will be false/ unchecked
alert("You run this script first time, so manual value will be 'false'")
}else{
checkMe = app.settings.getSetting("savea", "chck"); // if saved settings exist, get true or false
alert("Yes, checkMe will = "+checkMe)
win.checkPanel.chkOne.value = checkMe; /// checkbox value will equal saved checkMe
var fff = win.checkPanel.chkOne.value; // string for alert
alert("aha! but checkbox value is = " +fff+ "\n Why so?") // here we`ve got always "true"
win.checkPanel.chkOne.onClick = function () {
var path11 = win.checkPanel.chkOne.value; // checkbox value to variable
app.settings.saveSetting("savea", "chck", path11); //saving checkbox value
alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
win.checkPanel.chkOne.value is always true.
Can someone exmplain why and how to get rid of this static value?
P.S. just in case, here is full code:
function mainFun()
this.windowRef = null;
mainFun.prototype.run = function()
/*----- UI -----*/
var retval = true;
var win = new Window("palette", "Check option", [150, 150, 460, 455]);
this.windowRef = win;
win.checkPanel = win.add("panel", [25, 150, 285, 265], "Checkbox");
win.checkPanel.chkOne = win.checkPanel.add("checkbox", [10, 15, 125, 35], "Checkbox One");
//win.checkPanel.chkTxtOne = win.checkPanel.add('edittext', [140, 15, 230, 35], '');
win.quitBtn = win.add("button", [110,275,200,295], "Close");
checkMe = 11; //any value for the first time running
if (app.settings.haveSetting("savea", "chck")) {
checkMe = app.settings.getSetting("savea", "chck"); // get saved value, else 11
alert("checkMe = "+checkMe)
if(checkMe == 11){
checkMe= false; //if there is no saved settings, checkbox value will be false/ unchecked
alert("You run this script first time, so manual value will be 'false'")
}else{
checkMe = app.settings.getSetting("savea", "chck"); // if saved settings exist, get true or false
alert("Yes, checkMe will = "+checkMe)
win.checkPanel.chkOne.value = checkMe; /// checkbox value will equal saved checkMe
var fff = win.checkPanel.chkOne.value; // string for alert
alert("aha! but checkbox value is = " +fff+ "\n Why so?") // here we`ve got always "true"
win.checkPanel.chkOne.onClick = function () {
var path11 = win.checkPanel.chkOne.value; // checkbox value to variable
app.settings.saveSetting("savea", "chck", path11); //saving checkbox value
alert("Saved this value - " + app.settings.getSetting("savea", "chck"))
win.quitBtn.onClick = function() {
win.close();
win.center();
win.show();
return retval;
if(typeof(mainFun_unitTest) == "undefined") {
new mainFun().run();Played around with different values, combinations...
Doesn`t work too:
checkMe = 111; //any value for the first time running
if (app.settings.haveSetting("333", "check")) {
checkMe = app.settings.getSetting("333", "check");
alert(checkMe);
if(checkMe == 111){
win.checkPanel.chkOne.value= false;
}else{
if (checkMe != false){
win.checkPanel.chkOne.value= true;
}else{
win.checkPanel.chkOne.value= false;
win.checkPanel.chkOne.onClick = function () {
var path11 = win.checkPanel.chkOne.value;
var path12 = path11.toString();
app.settings.saveSetting("333", "check", path12);
alert("Saved value - " + app.settings.getSetting("333", "check")) -
Problem with decimal in Japan currency
Hi Gurus,
I have a problem with Japan currency that when When i take the printout of document with JPY 5,168,277 it is wrongly printing as 51,682.77 but in document display it is showing correclty as 5,168,277. But when i check this in BSEG table it was wrong updated as 51,682.77 (WRBTR field) i hope it is picking the amount from this field for printing .
For the above i made changes in OY01 but i find there was no use.
In OY01 the decimal place setting is 1,234,567.89 the middle one of the three.
When i post the same amount to japan co code in currency JPY and if i check in BSEG table
Amount in LC 51,682.77
Amount (WRBTR) 51,682.77
Orig.reduction 0.00
G/L amount 5,168,277
When i post the same amount in non japan co code in JPY Currency and check in BSEG(area where i am facing problem)
Amount in LC 47,550.22
Amount (WRBTR) 51,682.77
Orig.reduction 0.00
G/L amount 5,168,277
Please tell me how to correct this.May ne u can check this OSS note also 137626
Summary
Symptom
1. Which currencies have to be defined separately with regard to the number of decimal places?
2. What do I need to observe when maintaining decimal places for currencies?
3. Which Customizing presettings does SAP deliver in table TCURX (decimal places for currency codes)?
4. Does SAP deliver the Customizing presettings of decimal places for currency codes (Table TCURX) for upgrade installations?
5. Which information does SAP use for the specification of these Customizing presettings?
Solution
1. question: Which currencies have to be defined separately with
regard to the number of decimal places?
Answer:
The number of decimal places can vary for currencies. Currencies which do not have two decimal places must be defined in table TCURX (decimal places for currency codes).
You can maintain this table via the R/3 Implementation Guide (Global Settings -> Currencies, Transaction OY04).
If a currency is not defined in Table TCURX (decimal places for currency codes), this currency is regarded as currency with two decimal places.
2. question: What do I need to observe when maintaining decimal places
for currencies?
Answer:
During operation, you must neither delete currencies used nor change their definition of decimal places. Amounts in posted documents could become invalid or incorrect as a result.
3. question: Which Customizing presettings does SAP deliver in table
TCURX (decimal places for currency codes) ?
Answer
At present, SAP delivers the following Customizing presettings for table TCURX:
ISO Currency Decimal places
Code
ADP Andoran Peseta 0
AFA Afghani Afghani 0
BEF Belgian franc 0
BHD Bahraini dinar 3
BIF Burundi franc 0
BYB Belorussian rubel (old) 0
BYR Belorussian rubel (new) 0
CLP Chilean peso 0
COP Columbian peso 0
DEM3 (Internal) German Mark (3 Dec.) 3
DJF Djibouti franc 0
ECS Ecuadorian sucre 0
ESP Spanish peseta 0
GNF Guinea franc 0
GRD Greek drachma 0
HUF Hungarian forint 0
IDR Indonesian rupiah 0
IQD Iraqui dinar 3
ITL Italian lira 0
JOD Jordan dinar 3
JPY Japanese yen 0
KMF Comoros franc 0
KRW South Korean won 0
KWD Kuwaiti dinar 3
LAK Laos new kip 0
LUF Luxembourg franc 0
LYD Libyan dinar 3
MGF Madagascan franc 0
MZM Mozambique metical 0
OMR Omani rial 3
PTE Portugese escudo 0
PYG Paraguay guarani 0
ROL Roumanian Lei 0
RWF Rwanda franc 0
TJR Tadzhikistani rubel 0
TMM Turkmenistani manat 0
TND Tunesian dinar 3
TPE Timor escudo 0
TRL Turkish lira 0
TWD New Taiwan dollar 0
UGX Uganda shilling 0
USDN (Internal) US Dollar (5 dec.pl.) 5
VND Vietnamese dong 0
VUV Vanuata vatu 0
XAF CFA Franc BEAC 0
XOF CFA Franc BCEAO 0
XPF CFP Franc 0
4. question: Does SAP deliver the Customizing presettings of decimal
places for currency codes (Table TCURX) for upgrade
installations?
Antwort
Table TCURX (decimal places for currency codes) is a client-independent table of the delivery class "C" (Customizing table). Therefore the table contents for this table can only be delivered with new installations.
For upgrade installations, new or changed contents of Table TCURX are not delivered.
5. question: Which information does SAP use for the specification of
these Customizing presettings?
Answer
Currency codes and decimal places for currency codes are defined in ISO standard 4217. For the specification of decimal places for currency codes, SAP uses this ISO standard.
For some currencies, for example, for the "Turkish lira", the decimal places which are used in reality deviate from the ISO definition. In many of these cases, SAP decided to adhere to the definitions generally used.
Example:
ISO standard 4217 defines two decimal places for the Turkish lira (TRL), however in reality zero decimal places are being used for the Turkish lira. SAP delivers zero decimal places as Customizing presetting for "Turkish lira".
Header Data
Release Status: Released for Customer
Released on: 14.08.2007 13:12:09
Priority: Recommendations/additional info
Category: FAQ
Primary Component: XX-CSC-XX Country specific Customizing & Functionality (Standard R/3)
Secondary Components: FI Financial Accounting
Releases
Release Independant
Related Notes
434349 - Change of decimal places of currencies
126531 - Collective note preliminary availability Colombia
Print Selected Notes (PDF) -
Problem with the Value property node (MacOS)
As far as I have tested it, Value Property nodes (and Value (signaling)) don't work in MacOS : The value property appears as a boolean, the value(signaling) as a cluster (width, height).
Even with boolean controls, the node is not working.
No such problem in LV 8.6.
Am-I missing something ? Is that some "intended use" ? Or simply a bug ?
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Solved!
Go to Solution.That sounds like some sort of indexing problem with the property nodes like somesort of corrupted installation. What if you just delete the property node and recreate it?
I dropped a numeric control and looked at the shortcut menu for the list of property nodes. Right below Value and Value (signalling) are Visible (which would be a boolean) and Xcontrol, which when you step down through the submenus, the first choice is Container bounds, a cluster of Width and Height. So these 2 datatypes that are 2 lower on the list match the ones you are getting.
What happens if you pick another property node a few elements up or down on the shortcut menu? Does is happen for some other properties, and if so, are thereany properties that are okay?
Here is what my property nodes look like for a numeric and I draggged the box up and down to show the natural order of the property nodes. Note that I have scripting installed, so there are a few more property nodes (and the blue box at the top) that you might not have.
PS. Check you signature. The Kudos button is now moved to the left since the forum upgrade.
Attachments:
Example_VI_BD.png 4 KB -
Problems with F4 Value Help in NW2004s Portal
Hello,
we are having some troubles with the F4 ValueHelp Extension from the Advanced BSP Programming book (and the blogs of course).
We've implemented the solution on a 4.7 backend and portal 6.0. No problems there, everything was working fine.
We now moved to erp2005 (WebAS 700) and NW2004s Portal (7.0).
The popup shows and I can select entries from the list. But when clicking the ok icon a javascript error is thrown stating that 'parent.document.getElementById(...)' is null or no object.
I think the problem is, that by making a call to 'parent' we are searching in the portal frame and not the BSP. There (in the portal frame) the element is not known so the error is thrown.
I allready changed from the dialog_ie6.js provided on the BookCD to the one delivered by SAP. Did nothing regarding the error.
I also tried changing ZCL_BSP_M_INPUT_HELP->BUILD_ACCEPT_SELECTION_SCRIPT. I changed all the "parent.document.get..." "to document.get...". The error message was still the same, 'parent.document.getElementById(...)' is null or no object.
So now I'm kind of stuck. If I try the example outside the portal everything works as expected. So this clearly seems to be a problem with the portal integration. All involved BSP-Apps are marked as "supports portal integration".
Any ideas on this topic?
Thanks and kind regards,
Alexander SperlingI have a working solution to the problem. It isn't the nicest solution because it will probably require some modifications to the application that hosts the value help, but we will get to that in a second.
I tried many different ways to come up with a solution that would still work via JavaScript. The portal is now loading the popup javascript in the master frame. It registers event handlers so that if any application triggers a popup internally it "hi-jacks" the event. So regardless of what I change in the BSP javascript library, it gets overriden by the portal one. The portal also now even enforeces its theme on the inner page in the popup. Truly the portal takes complete control over the inner html of the popup.
To make things worse the popop has not path to reach the source that triggered it. The source objects are tracked in the javascript, but because the master frame takes over; the popup window only has access and visibility to the master frame and the navigation frame. In essence in the DOM it is now higher in the stack than the object that actually triggered it.
Web Dynpro gets around this because it doesn't use any client side mechanisms to communicate it results back to the source frame. Web Dynpro has the luxury of always being stateful and therefore can make certain assumptions that would never work in BSP. The hi-jacking is an excellent solution for Web Dynpro. The portal can then override the functionality of Web Dynpro - providing the new functionality of floating the dialog box over the entire portal - without having to make any changes to the Web Dynpro Framework. However they never had our little BSP solution in bind obviously.
It might be possible to completely rewrite the popup_ie.js and popup_ns.js to use all different event, method and variable names. This separate version could then provide complete separation from the portal script. However this is just a theory. I'm afraid that I wouldn't have the bandwidth to rewrite the entire script right now so I focused on a quicker solution.
The only approach that I could come up was to follow the Web Dynpro approach and return to the server with the value. To do that I used Portal Eventing. Portal Eventing allows us to pass a value to the source frame regaurdless of our relative positions in the DOM.
In my inner BSP application for the value help (ZES_VALUEHELP), I made the following change in the model method BUILD_ACCEPT_SEL_SCRIPT_V2. At line 141 I changed the logic. Instead of using JavaScript to write the selected value back into the source element, we will just trigger a Portal Event:
****With an InputField we write the contents directly back into the element
ELSE.
CONCATENATE me->js_close1
`portalFireEvent('com.sap','`
me->element_id
`',"`
key
`");`
INTO me->js_close1.
EXIT.
The other change is within the Element handler class for inputHelpV2 - ZCL_ES_BSP_ELMNT_INPUT_HELP_V2. We need to register the listener for the Portal Event. Therefore in DO_AT_BEGINNING we will add the follwing at line 23 (right after we place the Element Id into the URL Parameters Table.
data: portal_event type ref to cl_portal_event.
portal_event = cl_portal_event=>factory(
name = <wa_params>-value
namespace = 'com.sap' ).
while m_page_context->element_process( element = portal_event ) = co_element_continue.
endwhile. "End portalEvent Render
Overally using the portal eventing actually is an intersting approach. There is only one drawback, now we have a server side event. That being the case, our application now needs some event logic to process this event and populate the value. Depending upon if you are using MVC, Data Binding, or Flow Logic this could vary - and would have to handled by each application. The nice thing about the old approach was that it all happened via JavaScript on the Frontend and didn't require the application programmer to do anything - that was obviously its weakness as well. -
Problems with numeric values in the barcode
Hi
I have a problem with the data from a numeric field, when it is encoded in the barcode the validation pattern seems to be ignored.
I have set the validation pattern of the numeric field to be
num{9999}
And when I enter a value like "0200" it is displayed in the form as "0200", which is correct.
BUT in the barcode the value is captured as "200", which i NOT what I want. I need all four characters to be in the barcode. Even when the first one i 0 (zero).
How can I do that?
KirstineCan you send the form to [email protected] and I will have a look. Please include a description of the issue in the email as the email and this forum are not tied together.
paul -
Problem with RGB Values for Canvas Type ‚Horizontal Toolbar' in Webforms 10
Hello,
I have a problem with the canvas type ‘Horizontal Toolbar’ in Webforms 10g.
When I try to set or change the RGB value of a ‘Horizontal Toolbar’ with the forms function
Set_Canvas_Property(‘my_horizontal_toolbar’, BACKGROUND_COLOR, rgb-value)
(at runtime) it has no effect in Webforms 10g for the canvas type ‘Horizontal Toolbar’ (the background color of the horizontal toolbar doesn’t change).
But it works fine for other canvas types like ‘Stacked’ or ‘Content’.
In Oracle 6i (Client / Server) this function works quiet well (even for the ‘Horizontal Toolbar’ canvas type).
The reason why we are using rgb values instead of visual attributes in this case is, that the color of the ‘Horizontal Toolbar’ should be customizeable (via a RGB Field) for our customers (at runtime).
Further more we are using the same technique for Text-Field-Items, Content- and Stacked-Canvases (and all works fine).
Maybe it has something to do with the pre-configured IAS color-schema (blaf).
But changing the color schema (e.g.: from 'blaf' to 'red') has no effect also.
Thanks for your help.This is probably bug 777312. Call Support for the latest info on this bug and for help getting it fixed.
Maybe you are looking for
-
Urgent ! how to put check box in the smartform
<b>can anyone tell me how to display a check box (unselected) in the smartform.....</b>
-
I have windows 7 and i get this messagethere is a problem with adobe reader if it is running please
I have windows 7 and i get this era messwage when i try to open a pdf there is a problem with adobe re ader if it is running please exit and try again. (103:103). Already uninstalled and reenstalled adobe reader
-
Hi there, I have a discrepancy among the reports S_ALR_87012082 and FS10N starting from the first period of 2008. The "result" should be same according to the selection criteria done: - S_ALR_87012082 - Selected all the vendors for the specific compa
-
Embed Photoshop Web Gallery Into Site
I have been furiously scouring the internet for a tutorial, walk though, or simply any information at all on how to embed a Photoshop Web Gallery into a website that I'm creating using Dreamweaver; unfortunately, I have found nothing of value. The cl
-
hi, i've been having this strange problem with java applets and applications. happens with all versions except the microsoft VM in IE. As soon as an applet opens or an app is launched, the screen freezes. I have to suspend and wake-up windows to rest