Problem with Decoder DDTS-100

Hi,
I bought the decoder about 3 months back and it was working fine until I recently noticed that there was no output coming from my rear left speaker. I checked the connection and the speakers and found that the speakers was working perfectly as I use the speakers for my pc as well. Subsequently I ran the test function on the decoder and all my speakers produced sound except for the rear left speaker. Is there anyway to repair the decoder?

yup, by creative if you're under warranty. no point opening the product and diy repair when you just purchase it.

Similar Messages

  • Problems with TD7700 + DDTS-100

    hello everybody, i just bought my new speakers but it seems that i have some problems.
    I have connected all the speakers wires, all the wires between the bass, the decoder and switch box. Moreover i have connected my decoder with my soundcard via a coaxial cable and i have chosen coaxial conectivity in my decoder but i can't hear sound.
    I suspect that in some way my bass is cut off from electricity but i can't figure it out.
    Is there any led light that informs me that the bass is turned on? Maybe on the Audio Control Pod? The decoder is turned on properly.
    Please Help me.
    Thank you all in Advance

    Oh and something else tht i forgot. I'm not sure ow these 5.1->7.1 , upmixes etc work.
    My sound Card is a 5.1 Audigy A400
    Can someonw also help me with this?

  • Can I replace the Inspire 5500 decoder with a DDTS-100

    Hi,
    All I want to do is replace the decoder that comes with the Inspire 5.1 Digital 5500 set with a DDTS-100, and continue to use the same speakers. Is this possible?
    The only thing I can see preventing this is that at the moment the the sub and the decoder have to be connected via a din socket (for control and power), but there is no din input on the DDTS-100. Will this be a problem?
    Thanks in advance.

    Google is a wonderful tool... Tried it's
    http://www.hardwareluxx.de/akaspar/r...s00/back_s.jpg
    Message Edited by rico01 on 08-17-2005 05:09 PM

  • Connecting to my T6060 5.1 speakers with a DVD player thru Decoder DDTS-100

    Hi, I have a DVD player which has 2.1 audio output (left and right), a coaxial and an optical audio output. Can you tell me how to connect the creative T6060 (5.1) speakers with the DVD player. Can I connect the speaker with the DVD player with the decoder DDTS-100 to get 5.1 effect. Will the speakers would be working. Thanks,Jwell

    Your speakers should have a cable with 3 plugs on the end (orange, green and black). That plugs into the matching sockets on the DDTS-100, and you set the switch to 5.1. Then you need a lead to connect the dvd and its up to you if its coaxial or optical. For coaxial you can use pretty much any phono to phono lead, which you may already have. Ive got a feeling the DDTS-100 comes with one of each anyway. Thats all there is to it.

  • Creative Decoder DDTS 100,

    Hello,
    I.m using a creative decoder DDTS 100. When i switch on the decoder i set the volume, in which mode it should be, the volume of center and rear speakers. My problem over here when i switch off and switch on the decoder it comes to the default setting. What i want is my settings needed to be saved each time time i switch off and should come up with the same setting when i power on. Please provide me with a solution for this.
    Thank you.

    hi,
    i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
    i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
    if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
    sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
    my email address is [email protected], if you are interested please get in touch.
    thanks
    katherine x

  • Creative Decoder DDTS-100 parts list ??

    'Creative Decoder DDTS-100 parts list mspecifially the value for the capacitor "C06 "? this one is at the front of the unit.
    or if any one still has a working DDTS-100, and they don't mind taking it apart to read the value of this cap, that would also work as well.
    also, maybe? some one could also help me with the issue i have. regardless of the source, both headphone jacks on the front work as they should, the issue is with the audio outputs on the back, center/sub, rears , and the front right, no sound output, the front left, has sound output but it is very faint only can be heard when all volumes are set to max. could this be releated to the possible missing capacitor, C06 ? or could this be related to something internal, like one of the wire connectors that connect each board to each other ?
    ANY help would be awesome, thanks :-)

    hi,
    i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
    i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
    if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
    sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
    my email address is [email protected], if you are interested please get in touch.
    thanks
    katherine x

  • Problem with DECODE block in WHERE clause

    Hi,
    I'm facing problem with DECODE statement. I just simulated my problem in the simple way as follows. If I execute this following query, I should get "hello", but I'm not getting anything (ZERO rows returned).
    SELECT 'hello' FROM DUAL
    WHERE 'sample1' in (DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',
    2, '''sample4'', ''sample5'', ''sample6'''
    I think some problem is there in my WHERE clause.
    But When I'm exeucting the following query as a seperate query, then I'm getting the value of DECODE block properly, but didn;t understnad why its not returning the same way when I'm putting the same DECODE statement in WHERE clause.
    SELECT DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',
    2, '''sample4'', ''sample5'', ''sample6'''
    FROM DUAL;
    Please help me to get out of this problem. Thank you so much in advance.
    Thanks,
    Ramji.

    The value returned by SELECT DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',2, '''sample4'', ''sample5'', ''sample6''') FROM DUAL;
    'sample1', 'sample2', 'sample3' is a single string. Consider it x.
    SELECT 'hello' FROM DUAL WHERE 'sample1' in ( DECODE(1, 1, '''sample1'', ''sample2'', ''sample3''',2, '''sample4'', ''sample5'', ''sample6'''));
    is like SELECT 'hello' FROM DUAL WHERE 'sample1' in ('x');
    or
    SELECT 'hello' FROM DUAL WHERE 'sample1' in ('''sample1'', ''sample2'', ''sample3''') and not
    SELECT 'hello' FROM DUAL WHERE 'sample1' in ('sample1', 'sample2', 'sample3');
    For this same reason SELECT 'hello' FROM DUAL WHERE 'sample1' in (select '''sample1'', ''sample2'', ''sample3''' from dual);
    also does'nt work.
    Please use INSTR to find whether 'sample1' exists in the string 'sample1', 'sample2', 'sample3'.

  • Problems with decoding an latin1-encoded url

    Hi,
    i have a problem with decoding german umlaut-characters from an URL.
    I'm using Tomcat 5.5 on a Linux server and one on a windows machine for development. Both webapps have the same configurations.
    A servlet decodes the URL-String, parses it and stores the parsed data into a mysql-DB.
    For decoding the query-string i'm using org.apache.commons.codec.net.URLCodec.URLCodec.decode .
    Here's the code:
    String unparsedParameters = request.getQueryString();
    URLCodec codec = new URLCodec("ISO-8859-1");
    result = codec.decode(unparsedParameters);Here an example for a query-string: http://servername:8080/servlet/Import?Etwas%20wurde%20am%2025.08.2010%2010%3A16%3A50%20*ge%E4ndert*
    On the windows machine the word "*geändert*" is decoded correctly. But on the linux server i get "*ge?ndert*". It makes no difference if i write the result into the database or just into a logfile.
    Can anyone help?
    Thanks in advance.
    Edited by: sol1640 on Aug 26, 2010 5:59 AM

    Problem resolved.
    Instead of using the decode-method as described in my fist message now i'm doing the folowing:
    fURLDecodigCharset = "ISO8859-1";
    byte[] bytes = originalParam.getBytes(fURLDecodigCharset);
    byte[] decodeUrl = URLCodec.decodeUrl(bytes);
    result = new String (decodeUrl, fURLDecodigCharset);because the method "decode" decodes the string by using the defaultcharset. And that was the problem.
    >
    The default charset is determined during virtual-machine startup and typically depends upon the locale and charset of the underlying operating system.
    >
    Thats why i've got different behaviours on different systems.
    Thanks

  • Problem with decode!!!

    Hi guys,
    I have a problem with "decode"!
    How can I tell the decode expression
    that if a rowset don't exists --> then doing something.
    I've tried that with "NULL" but that don't works.
    here my code:
    I wanted that if tx.text doesn't exists then
    it returns fs.anlageschwerpunkt_lang, and otherwise
    it returns tx.Text.
    select
    decode(tx.Text,NULL,fs.anlageschwerpunkt_lang,tx.Text) Anlageschwerpunkt_1 from
    POI.Fondsstamm fs,
    Texte tx,
    Texttypstamm txy
    where
    tx.match='amfcomm'
    and tx.match=rtrim(fs.match)
    and tx.TEXTTYPID=txy.TEXTTYPID
    and txy.BEREICHSID=14
    and txy.texttyp='Marketingstrategie'
    I hope somebody of you can help me
    thanxx
    Schoeib

    I read Schoeibs question differently; no ROWS are being returned. In that case you cannot expect DECODE or any other function to do anything. Assuming that rows always exist in fs and txy and are only missing in tx, then you need an outer join. Note that the join of tx.match = rtrim(fs.match) has been altered to avoid outer joining to more than one table. As mentioned before, although the decode is OK, NVL could be used instead.
    select
    decode(tx.Text,NULL,fs.anlageschwerpunkt_lang,tx.Text) Anlageschwerpunkt_1 from
    POI.Fondsstamm fs,
    Texte tx,
    Texttypstamm txy
    where
    tx.match(+)='amfcomm'
    and rtrim(fs.match) = 'amfcomm'
    and tx.TEXTTYPID(+)=txy.TEXTTYPID
    and txy.BEREICHSID=14
    and txy.texttyp='Marketingstrategie'

  • Decoder ddts-100 found

    Hey all, I just thought that you all might want to know that I found a website that has the decoder ddts-100 for sale. According to the site there are 67 in stock. http://www.thenerds.net/index.php?pa...de=2-3477390-2 this is the website to go straight to the decoder.

    Yes and Yes. I've found that it sounds better though to simply copy the front channels to the rear, which neither of those matrix modes will do. Your best bet though is to get a sound card that does dolby digital li've encoding such as the auzentech xplosion or ht omega striker.

  • Decoder DDTS-100 upmix problem w analog inputs

    I've had the decoder for some time and it works fine with everything else (real sorry to see it's discontinued!!). But now I have a digital radio (WorldSpace.com with a Tongshi DAMB-R receiver) which outputs 2 channel stereo analog output, and the decoder only plays subwoofer, left, rt, and center channels in my 5.1 system -- i.e. there's no rear sound at all. Other analog stereo inputs to the decoder give me fine 5.1 sound. It seems to me, naive at these things as I am, that any 2 channel analog stereo should upmix to 5.1 like any other. But perhaps there's some funny bandwidth compression going on in the radio so it won't upmix to 5.1 There aren't any settings on the radio to adjust things that I can see.
    Any ideas on a workaround or at least illuminate me why this might be/is happening?
    Thanks,
    BaliDave

    First of all, the ddts-100, is just a 6.1 decoder, and doesnt really support 7.1.
    To get sound through every speaker, you will need to activate the 6.1-7.1 upmix, via the upmix switch on the back of the subwoofer. Then the rear right speaker should play when the rear left speaker does, as the 6.1-7.1 upmix, splits the 6.1 signal, and makes it 7.1.
    Also, for movies with 5.1 sound, like Dolby Digital or DTS, you will need to set the switch to 5.1-7.1, unless you want to upmix the 5.1 sound to 6.1 via DTS ES Matrix or Dolby Digital EX.
    When connected to the soundcard via digital spdif, you will only get stereo sound, as long as the sound isnt in digital AC3 (dolby digital/dts), so to get true surround sound in games, you will need to connect via the switch box with a analog connection and bypass the decoder, by setting the switch to "PC".
    But when wathing DVD's, I recommend using the digital connection. (You can allways use the analog connection though, but if you do, the soundcard will do the decoding, and this can cause some quality loss at times.)

  • Decoder DDTS-100 + digital out(audigy 2)via coaxial

    hi, if i connect ddts-100 decoder with audigy 2 via digital out(coaxial), can i mix stereo sound to multichannel witch DTS 6 neo or Dolby Pro Logic II? and if i send via coaxial AC3(movie witch AC3 or music from winamp surround edition) sound ddts-100 recognize this signal and play at all channel?Message Edited by mariuszkom on 07-19-2007 10:41 PM

    Yes and Yes. I've found that it sounds better though to simply copy the front channels to the rear, which neither of those matrix modes will do. Your best bet though is to get a sound card that does dolby digital li've encoding such as the auzentech xplosion or ht omega striker.

  • Anyone bought the Gigaworks speakers + Decoder DDTS-100 Packa

    Hi everyone,
    Anyone bought the Gigaworks speakers + Decoder DDTS-00 Package but dun need the decoder? Please let me know? I need a decoder badly.. thanks..
    Kekin

    To connect your Soundblaster NX to your DDTS-100 decoder, and let the decoder handle the DD/DTS decoding, you have to connect a digital/optical/coax cable, from the digital output of the NX, to one of the digital inputs on the decoder.. Also make sure you have set the settings on the souncard, to "digital output only", so that the decoder can decode the encoded digital streams, sendt by the soundcard..
    if you want to connect your soundcard to the decoder via analog cables, and let the soundcard do the decoding it self, you will need to use a 7.1 analog-audio cable, that comes with both the decoder and the speaker system. Connect the audio cable from the analog output on the soundcard, to the input "switch-box", and set the switch-box to "PC-audio". Also make sure you have connected your speakers to the "switch-box".

  • Creative decoder DDTS - 100 replacements? or new model?

    Well I wanted to buy ddts-100 but i guess i was too late and it got discontinued . I was about to get it on E bay but it went for too much. Can you guys recomend something as good or better to get then ddts-100 decoder? is its replacement coming soon? I have creative inspire T7900 speakers just in case thanx.

    hi,
    i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
    i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
    if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
    sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
    my email address is [email protected], if you are interested please get in touch.
    thanks
    katherine x

  • Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

    My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

    Sorry you are having problems with printing from the internet.  I have a few more questions to ask you before I can be of much assistance.
    What web-browser are you using?  
    Do you have any problems printing from Word or other non-internet documents?  
    What did you do to fix your computer (system restore, clean install of the OS, etc)?  
    Have you tried an alternate web-browser?
    Make sure to install all of your Microsoft updates to see if that helps.  Otherwise, answer those questions for me please and I will be happy to help.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

Maybe you are looking for