Problem with delete index of cube in process chain

HI ,i have a problem with my process chain,here on process name as delet index is ther which has been turned to red.when iam going inside of that in Display message iam getting the msg as"Indexes for InfoCube SMS_C06 have been deleted successfully".
since the process is in red next process is not been triggering,but i have to continue the process chain.
can anybody put some light into it.its very urgent........

Hi,
I ran into the same situation with one of my process chain that is part of a metachain. The process chain has the Delete Index that turned red. But the messages show that the indexes on all the cubes were deleted sucessfully.
As suggested, I did a repeat on the delete index variant, but no luck as it turned red again.
Anyone aware familiar with this issue?
Thanks,
Briston

Similar Messages

Problem with Construct DB Statistics varaint in Process Chain.

Hi Experts,
I try to create a variant Construct DB Statistics over Info Cube. my PC is as follows:
1. Start
2. Delete Index
3. Load data into Info Cube (Full Load).
4. Create Index
5. Construct DB Statistics
6. Delete Overlapping Requests from InfoCube .
I got the error message: No type "Delete Index" process can be in front of process "Construct Database Statistics" variable XXXXX in the chain
I* While creating the variant construct DB Statistics shall I take the object type as Info Cube or Info Package?*
Because when I use the InfoPackage as the Object Type I won't get any error message.
I need the clarification that:
Shall we Construct the DB Statistics over Info Cube or over the Info package?
Any suggestions please.
Thanks & Regards

We had the same problem. This had to do with a support package. Implement note 1122289 or BI Patch 17 (SAPKW70017). This solved our problem.
Regards,
Freek

Issue with Delete Index in process chain

Hi All,
I have a situation with Delete Index in my process chain.
Delete Index step, before loading data to cube, is taking around 2Hr to complete but some times it completes within 5 mins.
Anyone faces such issue? If yes, how can I fix it?
Thanks and Regards,
Alok

Hi,
If Statistics are not maintained for the cube then also it might casue the high run time in index deletion.
if its urgent then, can u try doing it manually form performance tab....
or once process chain step is complete, create statistics for the cube. Next run should take less time
Please try.
Regards,
Gaurav

Delete request in ODS and Cube from process chain

Hi Experts,
I have the next situation: I have a process that each month need to extract data with a selection criteria of fiscalperiod and fiscalyear, only I can maintain a data request with this selection. For this, I need a delete the old request when I am extracting new data with the same selection criteria, in ODS and Cube.
Is it possible?
Thank you very much for your collaboration.
Regards,
Jeysi

Hi Jeysi,
DSO works on 'Overwrite' principle.
You need to check your data source.(The images your data source sends).
Even if your updating the key figures using addition method, the data source will send you the correct images and correct delta to keep your DSO as a reflection of the latest image of your source system.
Hence you would not require to delete a request with the same selection in the DSO.
Moreover, if you have a cube at the downstream of the DSO, loading deltas from the DSO to cube would alone be sufficient and you would not need to use delete overlapping request.
However, if you are loading full request to the cube from the data source with the selections of fiscal year and fiscal period , then yes you do require delete overlapping selections.
In 3.x data flow, this was configured in infopackage in data target tab there is one column for automatic deletions, here you could set the conditions on which the overlapping request in the data target(cube) in this case should be deleted.
In process chain, you can use , delete overlapping request from the process chain.under application node, load process and post processing.(This can be configured for both infopackages and DTP's)
Hope this helps,
Regards,
Sunmit.

ABAP Routine for Deleting and creating index for ODS in Process chains

Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.

Hi Sachin,
find the following ABAP code to delete ODS ondex.
data : v_ods type RSDODSOBJECT.
move 'ODSname' to v_ods .
CALL FUNCTION 'RSSM_PROCESS_ODS_DROP_INDEXES'
EXPORTING
I_ODS = v_ods.
To create index:
data : v_ods type RSDODSOBJECT.
move 'ODSname' to v_ods .
CALL FUNCTION 'RSSM_PROCESS_ODS_CREA_INDEXES'
EXPORTING
I_ODS = v_ods.
hope it helps....
regards,
Raju

I how problems with delete/ fix alias

I how problems with delete/fix alias. Somehow, I am trying to delete or fix alias by clicking the icon it show a pop-up saying to click "delete alias" or "fix alias." When I click "delete alias", it wouldn't let me. When I click "fix alias" I could not find what I am looking for. I try clicking different icon, but is show a pop-up saying "it could not be found (error code-43). Can someone help out????

Moved to InDesign forum.
You can start by telling us what the problem is.

Have a problem with deletting a folder that has lots over 100+ folders in it that are locked, please help

Have a problem with deletting a folder that has 100+'s folders in it that are locked. Please help.

Put the folder into the trash - go to the Finder menu and hold down the alt key whilst selecting Empty Trash.
I've never tried this with a folder full of locked files, but it certainly works with a single locked file.
Hope that helps!

Cube compression process chain creating

Hi,
I want to create Cube compression process chain so that it will automate the process to compress the cube.
Could any please provide me the steps to create Process chain to automate the cube compression.
Regards,
Prem.
Please search the forum
Edited by: Pravender on Aug 27, 2010 11:54 AM

Hi,
You can modify ur process chain in RSPC.
Get into change mode in planning view and in the left side check for the different process where you can find the Compression process.
Drag the same to right section and create a variant for the same and give the cube name. Once done then you can put the same after the cube load process (If roll up is there then it shud be after rollup if not then cube load process).
Once all changes are done then, activate it and collect the same in transport to move the changes to next level.
Hope this helps.
Murali

Error in generating/deleting the index of the cube in Process chain

Hi All,
I am getting an error in the process chain during the deletion/generation of index in the cube....
error says: " Deleting/reconstructing indexes for InfoCube 0CSAL_C01 is not permitted "
Need your input for the same.....
Thanks & Regards,
Anup

Hi Anup,
Try to analyse the error in the manage tab of that cube, and try to do the reconstruction of indexes manually.
Good day!!!
Regards
Arun S

Apple please read: Serious problem with Spotlight indexing!

My MacPro has a serious problem and I don't know what to do: Spotlight has been indexing for two weeks now, day and night. When I click the spotlight icon, the info box says that it is "calculating time", which I guess means that OSX tries to find out how long the indexing will take. Consol reports this line again and again (for the last two weeks):
"...pple.launchd(1) (com.digidesign.fwfamily.helper (10466) posix_spawnp/"/Library/Application Support/ Digidesign/fireWire/DigidesignFireWireHelper", ...): No such file or directory"
I removed Digidesign ProTools from this Mac two months ago, and I thought every files were removed. Obviously, Spotlight is trying to remove a file it cannot find... When I set all files to visible (with Terminal), there is NO file with the required name on my Mac.
What is the solution? How do I get rid of this problem? It creates other problem, like stopping any security update I try to install. It also makes saving files veeeery slow, and applications freeze with the spinning wheel for half a minute or more quite often.
I tried to reinstall MacOSX (archive and install), but it did not help. Then I had to authorize lots of plugins (for my music software) again, very annoying (and I lost some authorizations).
Any serious help is what I need.
Message was edited by: Helge Krabye

Helge Krabye wrote:
"...pple.launchd(1) (com.digidesign.fwfamily.helper (10466) posix_spawnp/"/Library/Application Support/ Digidesign/fireWire/DigidesignFireWireHelper", ...): No such file or directory"
Hi!
This is another problem that is not related to Spotlight...
launchd is the (sort of) mother of all processes on Mac OS X.
It looks for "LaunchDaemons" and "LaunchAgents" in two folders "/Library" and "/System/Library" (there should be subfolders with the name "LaunchDaemons" and "LaunchAgents").
Go into these subfolders and delete any trace that's left from Digidesign Protools...
That should help to get rid off the error messages.
Then look for other Console messages that start with "mds", "mdworker" or alike. The name of every process that is related to Spotlight starts with the letters "md" (metadata)...
Check with the utility Activity Monitor which process is hogging CPU and/or disk...
Cheers,
Walter

How to delete InfoCube data in a Process Chain with restictions?

Hi Friends!
My process chain is a full update in the cube
I need delete the data everyday except the last day in the month.
How can I do this in 7.0 release?
Thanks!

Hi,
Please use the option Delete of overlapp requests process type
Take the following conditions as :
1) Only delete request from same DTP
3) Only Full DTP
3) Only Delete DTP requests from same souce
Selections are
Overlapping
Request date
Is in the current month
based on the month
Hope this helps out
Thanks
PT
Edited by: PT on Feb 23, 2010 7:18 PM

Problems with delete overlapping requests from InfoCube in PC

Hi guys,
Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
For example:
I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
Is this possible? If yes how?
Thanks in advance
Jão Arvanas

It will not work that way.
It will look if the selections are same then it wil delete if not then it will not do that activity.
Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
So in this case the selections are different and hence its not possible.
Thanks
Murali

Problems with deleted outbound deilverys

Hi all,
I have the following problem with a deleted outbound delivery. The issue is that a sales order was created and a outbound delivery was assigned to this sale order, but somebody deleted the outbound delivery, unassigned the corresponding material and the shipping person assigned this outbound to another sale order believing that there were still plenty of material to cover both sales orders.
The help needed here is how do I know which user deleted the outbound delivery is there a record for that??
I'll appreciate your help a lot.
Best Regards,
Erik Espinosa

Malice is seldom behind stuff like this, from my experiences.
Prime candidate is human error (possibly with an attempt to fix it, which also includes hiding it...).
=> Send the sales folks a mail with the order number and description in it and ask them whether any of them know about it or are aware that an error might have been made. This gives them the opportunity to realize the implications of their mistake, or "own up" to it.
Depending on how your system is integrated and how many "cowboy" developers you had / have around, faulty config and even naive user-exits cannot be completely excluded.
=> Hard to find (better to prevent), but doing a where-used-list on the related VK* tables to see whether any Z-programs turn up is a start.
Either way, with the sales order number, you should be able to find the user context which performed these actions via the business change documents.
=> Take a look at the SCD* transactions, and the CD* tables.
If it was a batch user at midnight... then see "Hard to find..." above.
Cheers,
Julius

Problem with delete operation

Hi all,
Jdev version(11.1.1.3.0)
I have a <af:table> with a check box.I can select the rows
by checking check box and delete those rows.
Sometimes am facing a problem in deleteing the rows.
The viewobject that binded to the table,is based on two
Entity Objects A&B.The table B has no primary key field.But
it has a dynamic row_id as key fileld.
The problem is am not able to filter
the query results,when I select dynamic "Row_Id" in the select
query,I can't filter the records.(In the VO if I unselect the ROW_Id,
got an error like"Row_id missing in the view oject")Because of
this issue am not able to delete the records.Due to
this problem,delete works only in random.
Please share the ideas..
Thanks
Swapna

Try selecting a different attribute for EntityB as a key field

Problems with deleted Podcasts from iPod Touch (Проблема с удалением)

У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.

You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes

Problem with delete index of cube in process chain

Similar Messages

Maybe you are looking for