Problem with deleting files from new Zen St

I recently bought a Zen Stone and today needed to delete some files. Did this from Windows (like with my Zen Nano), but this did not free any space on the Stone.
Went to browse files (albums) on Stone and found several names that did not show up in either a Windows Explorer or Media Lite search.
Apparently when I deleted the old files, they did not actually get deleted (guess I have to use Media Lite to do this)
Any suggestions as to how to remove these files without reformatting?

Hi,
Do you expect anyone to read that? Please use code formatting when you post code. See the formatting tips:
http://forum.java.sun.com/help.jspa?sec=formatting
Kaj

Similar Messages

Problem with NEF files from Nikon D4

Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same.

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

Problem moving/deleting files from time machine backup

I recently ran into some problems with my hardrive and had to get it replaced at the mac store.
Unfortunatly, i only ran a partial time machine backup on the hardrive before i lost it.
Fotrunatly though, it did manage to save some important stuff, but now for the next problem....
I have dragged my files from my external hardrive with the partial time machine backup onto my new desktop but it wont let me do stuff with them
this includes;
asking for my password whenever i want to delete one of them
saying "cannnot be modified" whenever i try to drag the files to a new location.
as you can imagine, this is a bit of a pain.
anyone have anything similair?
help would be great
thanks
Chris

That is not how you restore from a Time Machine backup.
Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Problem with downloading file from FTP server

Hello all
I have uploaded a file from an application i developed and i want to download this file from another application. The code is
public static void FTPcon() throws FtpException{
   String hostname = "my.ftp.server";
   String username = "myusername";
   String password = "mypass";
   Ftp ftp = new Ftp(hostname,username,password);
   ftp.setHostname(hostname);
        ftp.setUsername(username);
        ftp.setPassword(password);
        ftp.connect();
        ftp.setBinary();
        ftp.download("file.dat");
        ftp.disconnect();
}The error i receive is java.io.FileNotFoundException: public.dat (The system cannot find the file specified) but the file is on the server.
Thanks in advance for any help

Cotton thank you for your reply
Any other sugestions please?The server disagrees. So...
- the file does not existThe file exists.I checked it with an FTP client program.
- the file has a different nameThe file name is correct
- you are connected to the wrong serverI am connecting to the correct server
- you are in the wrong ftp directoryThe file is placed in the home directory
- the ftp library you are using is broken (less
likely)I am using the library from jscape.I dont think is broken because i can upload the file from the first application.
>
FTP isn't somehow broken in Java. I use it all the
time. The problem is something listed above. I would
check all of the first four if I were you because
that's most likely where the problem is.Message was edited by:
flightcaptain

Migration Assistant Deleted Files from New Mac

I had bought a new laptop and wanted to put the files from my old laptop onto my new one and used the time machine and migration assistant. When I realized that i forgot to transfer a folder, I went back on the migration assistant and only clicked to transfer the desktop folder and no other files. Once the transfer was complete, I realized that all my files that I had accumulated recently onto my new laptop were deleted. Is there anyway to get those files back (they weren't on the time machine, since they were from the past week or so)?

Did you have TM running with the new laptop.. if so you should be able to recover the lost files.. otherwise they could be gone.
Did you have the same user logged on as you had in the original setup.. when you migrate it is so so important NOT to use the same login name.. by doing it twice you might have messed it up. Unless you were backing up the files are gone.. but make sure there is not another user created on the disk.
You might be able to undelete files but I am not very hopeful. That might be the last opportunity though to recover.

Help? Problem with deleting photos from I-photo?

I have created some New Event trash folders to drag all my deleted photos from the trash bin as advised. I had thousands of deleted photos to deal with. Now the problem is that the bin looks empty but it still indicates that there are over 7000 photos left in it. I cannot see those items so I cannot drag them out. Should I start reloading the trash bin (small amounts at a time!!) when there is still an amount in it??? How do I get rid of the remaining items? Should I just go and do a repair or rebuilding now?? Please help! Thanks!

Should I just go and do a repair or rebuilding now?
Yes.

Problems with deleted Podcasts from iPod Touch (Проблема с удалением)

У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.

You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes

Problems with downloading file from database!

I have a table with my files:
NAME     VARCHAR2(256)
LAST_UPDATED     DATE
MIME_TYPE      VARCHAR2(128)
DOC_SIZE     NUMBER
DAD_CHARSET     VARCHAR2(128)
CONTENT_TYPE     VARCHAR2(128)
CONTENT     LONG RAW
BLOB_CONTENT      BLOB
ID     NUMBER
I have a procedure which download file for it's ID:
procedure DownloadFile(id number)
is
v_mime VARCHAR2 (48);
v_length NUMBER;
v_file_name VARCHAR2 (2000);
lob_loc BLOB;
i integer;
BEGIN
i:=id;
SELECT d.mime_type, d.blob_content, d.NAME, DBMS_LOB.getlength(d.blob_content)
INTO v_mime, lob_loc, v_file_name, v_length
FROM documents d, mydocs m
WHERE d.id=m.doc_id
and m.id=i;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
OWA_UTIL.mime_header (NVL (v_mime, 'application/octet'), FALSE);
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
HTP.p ( 'Content-Disposition: attachment; filename="'
|| REPLACE (REPLACE (SUBSTR (v_file_name,
INSTR (v_file_name, '/') + 1
CHR (10),
NULL
CHR (13),
NULL
|| '"'
-- close the headers
OWA_UTIL.http_header_close;
-- download the BLOB
WPG_DOCLOAD.download_file(lob_loc);
end;
And when I press Download button, it open the file content in browser.
But I need save dialog, for saving the file in the clien machine.
How to solve this problem?
Regards,
Kostya!
Message was edited by:
Kostya

How downloaded objects/document are treated in browser is purely "browser defined behavior". Sometime someone said that or these kind of files (recognized by miome contenet - alias file extension) default behavior will be "show inline" or show in browser. This is esspecially true for Adobe 7.x and IE 6.x and Firefox 2.x....
For a test of my thoughts, install new browser (let say Opera or Mozila) and try to download LOB(doc). I'm sure that "Save As" dialog will show!
Hope this helps!

Problems with RAW files from Nikon D4

At the moment I'm using LR 4.1 rc and PS CS 6 beta. I tried to send a D4 raw file from LR to PS, but PS didn't open it.
The next thing I tried was to open D4 raws directly with PS CS 6, no success either.
The raw files from my D200 aren't any problem.
So is there knowledge wether PS CS 6 is supporting Nikon D4 RAWs or not? If it should be supported, what could be my problem?
Thx in advance
Dominik

See this link for full details on camera support in Camera Raw versions:
http://blogs.adobe.com/lightroomjournal/2012/03/raw-support-in-lightroom-and-camera-raw.ht ml
Snip taken from link above:
You’ll also note that ACR7, available with Photoshop CS6 beta, is lagging the most in updated camera support. This is based on when we lock down or “bake” the code for each release. Even though ACR7 was only released last week it was “baked” before Lightroom 4.0 and Camera Raw 6.7. Similarly, Lightroom 4.0 was finalized before Camera Raw 6.7. We’ll get Lightroom and Camera Raw in sync soon but in the interim, here’s the latest incremental support list for each product, relative to Camera Raw 6.6 and Lightroom 3.6:
Photoshop CS6 beta with ACR7
Canon PowerShot S100V
Fuji FinePix X-S1
NOTE:
ACR7.1 will have the superset of all currently supported cameras in ACR6.7 and LR4.1 plus a few extras.

Problem with deleting files !!

I want to delete file, but for some extensions it is not possible, how can I delete all files?
I use
myFile.delete();

How about the return value from your delete call, is it "true"? What happens when you try to delete the file via your OS? Why do you seem to think that this behavior is specific to certain file extensions? Which extensions are you having trouble with?
Sorry for all the questions. Just as a guess, I think the most common reason for a delete call not to work on a Windows box is because the file is in use by some other program - an editor, or maybe a web server. Trying to delete the file via the OS might give you a better idea of why it's not deleting.
good luck
Lee

Working with Raw files from newer camera in CS or CS2

I have a Canon 40d camera. I'm still using CS at home and CS2 at work.
In order to work with these files in these earlier versions of PS, I have to first convert them to DNG files. Though not a complete drag, it is a bit time-consuming. Am I sort of stuck with this unless I upgrade to CS3?
Also, (and I realize it may not be off topic), is there any particular reason Canon can't use the same type of RAW file for all the cameras, instead of a new RAW file type, or why have they not embraced DNG support?
Best, David

freedda,
I know you have probably read this many times before. But ACR in Photoshop CS3 is vastly improved. There are numerous new controls that provide you with much greater flexibility with your raw images. Unless there are other factors preventing you from upgrading, it is my opinion that you would find the upgrade well worth the investment.

Problem with reading files from folders - please help

Hi!
I have 2 folders (folder1 and folder2) on 2 different locations. Now i will say few things about my program.
First folder is input folder. Different applications generate XML files and put them inside folder1.
Then i have my application which i use to manipulate with those folders. Basically, i have 2 threads. One is checking if there are files in folder1 and other thread is moving manipulated files from folder1 to folder2.
I face this problem. XML files are much faster generated then manipulated. Example: for every 3 incoming files into folder1 i have 1 manipulated and stored file into folder2. This way i face problem that some older files are never manipulated, they are stuck in folder1 basically forever.
Could someone help me to solve this problem? I do not know how to select files form folder1 ordered by "date modified time".
Tnx for your time and help!

Do not crosspost! I'll lock this thread.

Problem with JPEG files from Leica M and GPS data

It seems there's a serious bug in Camera Raw 8, hosted in Bridge CS6 on an MS Windows machine, with regard to GPS metadata.
When using a Leica M (Typ 240) with a multi-function handgrip then both the DNG files (DNG is Leica's native raw format) and the JPEG files out of the camera will include GPS position data in the respective EXIF metadata sections. However, Bridge refuses to display the JPEG files' GPS data (while there's no problem with the GPS data in the DNG files). Worse yet—when loading a JPEG file in Camera Raw for some parametric adjustments and saving the file then the GPS data will be entirely gone! (Again, no problems with the DNG files' GPS data.)
I suppose that Camera Raw 8 hosted in Bridge CC as well as Lightroom 5 are suffering from the same issue.

Nobody? Absolutely nobody?? Zalman? Eric? Anyone?
If you need more input from me then please talk to me.

Reoccuring HANGING problem with transferring files from old MACBOOK

ok, so I recently bought a iMac and i wanted to transfer my music and photo files from my older (waterdamaged a while back but still works fine) macbook. I've tried basically every method to try and get this done.
I've tried migration assistant, transferring the files through a shared wireless network, through firewire/disk target mode, but all of those methods i tried resulted in hanging very early on in the transferring and copying operation.
I believe it must have something to do with my macbook's hard drive, but i have no idea what to do at this point. Could someone please help me?

the thing is tho, the hard drive had no problems copying and transferring for over a year after the damage, while i continued to use it. I don't a reason why it wouldn't work now when i finally want to move a larger number of files at once (itunes music folder, iphoto library)

Problem with deleting files from new Zen St

Similar Messages

Maybe you are looking for