Problem with deleting images on IPod

Hello,
I uploaded some images from laptop to IPod, and now I can't delete them anymore.
How do I get them removed from the IPod?
the images are in stored in Photo's, together with images taken with the IPod's camera, which can be deleted.

Thank you for helping.
But it is not completely helping.
from steps:
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply.
with step 2 my windows does show an other pop-up: There are not anymore photos of your iPod synchronised. Do you like to delete or keep the photos that were synchronised some hours ago?
I choose Delete, but then the pictures are still on the iPod

Similar Messages

  • Problems with deleted Podcasts from iPod Touch (Проблема с удалением)

    У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
    Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
    С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
    I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
    Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
    Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.

    You can only sync with one computer. I would backup to one computer and then restore from backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes       

  • Problem with deleting images from iPhone with Mac

    When I connect my iPhone 5 to macbook pro Image Acquire opens. I want to delete all images of my iPhone but with it (Image Acquire) I can't because  the delete button is disabled. Why? Maybe because I noticed a locker near the images? Don't know, can help me?

    Image Acquire or Image Capture?
    Launch Image Capture located in your Applications folder.
    Make sure your iPhone is turned on then connect the iPhone to your Mac.
    Make sure the iPhone is selected under DEVICES.
    See if: Delete after import   is available now.

  • Problem with Loading Images?

    <pre><i>Locking duplicate thread.
    Please continue here: [[/questions/982030]]
    </i></pre>
    Hi,
    I'm using Firefox 26.0 and I'm kinda new user to Firefox.
    I'm having this random issue with facebook (sometimes with other websites too),
    Sometimes when I open a page, the Images doesn't show as usual.
    Sometimes it takes up to 10sec - 2 mnts to finish loading all the images.
    My internet is 8Mbps so I don't think its due to that?
    Here is a screenshot of the exact issue: http://i.imgur.com/I3eOQaI.jpg
    But it get fixed for a while (say 1-2 days) if I clear the cookies and caches. I visits a lot of webpages so clearing cookies and caches all the times is kinda not pretty possible.
    I also tried disabling all my add-ons, and ran a full scan with McAfee.
    Can anyone tells me what exactly could be the issue? It gets pretty annoying sometimes!
    Thanks in advance!
    Regards,
    Abey

    '''Hi, Thanks for Visiting this Question. But it was a duplicate of https://support.mozilla.org/en-US/questions/982030 (The Same question) Accidentally posted twice''' and I couldn't find an option to delete it, so please '''ignore''' this :-)
    Original thread: [[https://support.mozilla.org/en-US/questions/982030|"Problem with Loading Images"]]
    Warm Regards,
    Abey

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

  • Hi I am having a problem with viber on my iPod touch can u help?

    i Am having a problem with viber on my iPod touch could you help

    Hi there ciarafrombalbriggan,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    -Griff W.

  • Problem with Gif image

    Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
    JPanel toolBarsPanel = new JPanel();
    javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
    JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
    JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
    JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
    JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
    toolbar.add(zoomin);
    toolbar.add(fullext);
    toolbar.add(identify);
    toolbar.add(btn);
    add(toolbar, BorderLayout.NORTH);
    Thanks again for any help!

    I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
    The only two things I can recommend are:
    - complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
    - assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
    As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
    HTH,
    Manuel Amago.

  • For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file.  I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

    I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
    Bad Image
    There was a problem with the image file. 
    Please help.

    Can you drag it to the Desktop?

  • I have a problem with vertical images burned on a cd

    I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
    John

    Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
      Charge Information:
      Charge remaining (mAh):    4356
      Fully charged:    Yes
      Charging:    No
      Full charge capacity (mAh):    4356
      Health Information:
      Cycle count:    813
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    0
      Voltage (mV):    12571

  • I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

    I have problems with uploading images to my internet printing company when  the images have been manipulated through CS6 and  i have saved images as jpeg  the printer company tell me they are not j peg,
    but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

    Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
    There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
    Take your pick.

  • Problem with displaying image

    Hello!
    Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
    So.. I have the interactive report
    table test (
    NAME NOT NULL VARCHAR2(4000)
    ID NUMBER
    BLOB_CONTENT BLOB
    MIME_TYPE VARCHAR2(4000))
    I need to display the column blob_content.
    Thnks a lot.

    1009316 wrote:
    Hello! Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "1009316".
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
    So.. I have the interactive report
    table test (
    NAME NOT NULL VARCHAR2(4000)
    ID NUMBER
    BLOB_CONTENT BLOB
    MIME_TYPE VARCHAR2(4000))
    I need to display the column blob_content.This is described in the documentation: About BLOB Support in Forms and Reports and Display Image. There's an OBE tutorial that followed the introduction of declarative BLOB support in 3.1 as well.

  • I how problems with delete/ fix alias

    I how problems with delete/fix alias. Somehow, I am trying to delete or fix alias by clicking the icon it show a pop-up saying to click "delete alias" or "fix alias." When I click "delete alias", it wouldn't let me. When I click "fix alias" I could not find what I am looking for. I try clicking different icon, but is show a pop-up saying "it could not be found (error code-43). Can someone help out????

    Moved to InDesign forum.
    You can start by telling us what the problem is.

  • Problem with scramb image MULTI DISTORTION COLOR

    PROBLEM WITH IMAGE,  SOMETIMES ITS DISTORTIONATED, AND SLOW

    Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
    It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
    Clinton

  • Problem with Atf, Image distortion

    I got a problem with image Distortion
    Here my atf in atf viewer: [IMG]http://i.imgur.com/d75aU.png[/IMG]
    Heres my atf in FLashPlayer using 11.4.402.287: [IMG]http://i.imgur.com/H2vEV.png[/IMG]
    notice the red pixel in the green part of the texture.
    Im using png2atf with no parameters.

    Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
    It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
    Clinton

  • I am facing a Problem with reading images from database

    Hi everybody..
    any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code... 
                    string connect = "datasource = localhost; port = 3306; username = root; password = ;"; 
                    MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
                    MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
                    MySqlDataReader reader; 
                    try
                        conn.Open(); // Opening Connection
                        reader = sda.ExecuteReader(); // Executing my Query..
                        while (reader.Read())
                            byte[] imgg = (byte[])(reader["Picture"]);
                            if (imgg == null)
                                pc1.Image = null;
                            else
                                MemoryStream mstream = new MemoryStream(imgg);
                                pc1.Image = System.Drawing.Image.FromStream(mstream);
    It says Parameter not Valid... i am reading all the images from database

    I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
    to compare the imgg array data with the data before it was written to the database to see if the data matches.  I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
    byte count.
    An image is binary data.  The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data.  The solution usually is to use UTF8 encoding instead of the default ascii encoding. 
    Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
    jdweng

Maybe you are looking for

  • Inspection type 01 - inspection lot creation based on vendor batch number

    Hi Guys, this topic has been discussed several times here, but I was not able to find a suitable answer for my question. I am facing the folowing requirement: I have activated inspection type 01 for a raw material. I am receiving a firs goods receipt

  • Profile pictures not loaded after ios8 update

    Hi, I've just updated to iOS 8 on my iPad, and upon opening skype, none of the profile pictures for my contacts have loaded. Since then, I have added 2 people as a contact and their profile pictures load up fine. Is anyone experiencing a similar prob

  • Tree, msut be a seen across multiple transaction.

    Hi, After a considerable time i amable to develop a Tree in a dockig container and populate it. Now the requirement is this tree mut be alive across mutiple Transactions. Yes, i am calling docking container across two transactions. so the docking con

  • V_R_System operatingSystemServicePac0 and operatingSystem0

    A customer was asking why their production SCCM system had v_R_System with extra fields operatingSystemServicePac0 and operatingSystem0, but their lab system didn't.  I checked several other systems, all at R2, and none of them had these fields, one

  • Transferring Photos from MacBook Pro to my Tower

    Need a little assistance with this. I would like to transfer the iPhoto library from my laptop to my tower. Is this a simple process? How would I go about doing this? Thank you for your help in advance.