Problem with Delivery due list VL10b for STO's - Orders not disappearing

Hi
We have a problem where some 'Stock Transfer orders' are not disappearing from the delivery due list VL10b
Collective processing of documents due for delivery - Purchase orders
hence we have had two deliveries created for one STO order, which in turn has been goods receipted
Any ideas on what the cause of this problem could be ?
The quantities have not been changed on the STO
Please help
Thanks
Tony

Hi
Checked OVLP item category NLN standard stock Trans item IS relevant for picking
Over delivery Option is blank currently - what will happen if i change to B ?
Thanks
Tony
Edited by: Tony Lannon on Aug 5, 2009 3:33 PM
Edited by: Tony Lannon on Aug 5, 2009 3:34 PM

Similar Messages

Problem with Billing due list, relating to Returns Credits

Hi
I have a query/ problem with the billing due list
I cannot seem to be able to create billing documents via VF04 for Returns credits, only via VF01
I have changed Billing relevance of Item category REN to be A - Delivery related,
As we previously had problems with incorrect qty being billed IF returned delivery quantity was different to Returns order quantity - this resolved the problem but I now cannot create billing via billing due list
Messsage appears ' delivery type LR cannot be invoiced with billing type F2'
If i enter billing type RE then the document is not gettting picked up at all
when Billing relevance of item category was B, order related - all seemed to be working ok
I have copy controls set up from LR to RE with item category REN, with pricing type G
Please advise how i can get the Returns to appear in the billing due list
many thanks for your help
Tony

Hi,
In copy controll VTFL
LR to F2 at item level
REN >>> Deatila >>> Put billing quantity as - D delivery related
Kapil

More problems with security update 2007-008 for 10.3.9 not solved by reboot

I did this update and now even though airport says it's connected to my network safari will not connect to the internet. Also, internet connect and the keychain application both go to "application not responding". Any help is appreciated. Can I uninstall it?

Okay, so it was keychain that was the problem... it needed access but it took like 5-6 restarts to get the program to ask for permission, weird...
Also, sorry for topping other post as it does now seem that it was the same problem after all.

Log from delivery due list processing

Hi All,
Where I can see the log from the delivery due list processing for * the deliveries that could not be created* ?
And also the log from the delivery due list processing for * successfully created deliveries* ?
Thanks & Regards,
Raju.
Moderator message: not directly related to ABAP development, please have look in the appropriate functional forum.
Edited by: Thomas Zloch on Nov 23, 2010 12:56 PM

hi,
this is to inform you that,
you can see * the deliveries that could not be created*: in VL06F you will find in STATUS OUTBOUND DELIVERIES FUNCTION.
you can see * successfully created deliveries* : in VL06F you will find in STATUS OUTBOUND DELIVERIES FUNCTION
in the above you will find 4 options
NONE: not relevant.
A: not yet processed
B:partial processed
c:completley processed.
take a pick of the options which ever you want to you can find out.
regards,
balajia

Order related invoice created still showing in delivery due list

Dear All,
i am having an order type as ZSCR
which is both order related billing and delivery related billing type assigned to it.
both the order related and delivery related invoice is ZSCR
the problem is that when ever i am creating a order related invoice the order still showing in the delivery duelist even the invoice is already created.
so how to stop the order to come in delievry due list after it has invoiced.
Thanks With Regards
Subrat

hi,
if i understand correctly order related billing is done while you go for third party scenariio and delivery related billing is done when you deliver the goods
if i am right in understanding, in third party scenario you change the item category from TAN to TAS whicn automatically will create a PR the schedule line category changes to CS which implies order is not relevant to delivery as your third party vendor will be doing the delivery so you dont do the delivery and your order willnot be shown in delivery due list.
in the other case you follow the normal OTC cycle.
regards,
krishna

Delivery Due list need plants

Hi all,
In Delivery due list Vl10A, i need to show the plant in the due list. Problem is multiple plants are assigned to the same shipping point. Currently, the list is showing shipping point and a plant. For example, Shipping point S100 with 2 plants P100 and P200 will show S100 and P100. I like to add another line to show S100 and P200 in the due list.
Any suggestions as to where i can make the changes ? I see that the vepvg is only for shippping point with no plant.
CT_POSTAB does have plant but it comes from vepvg.
thanks
Joyce

Hi Please check this link .
delivery due list!
Apart from there is one tab called user role . Many atime thing are controlled from here as well so please check the role .
Hope this help

Sales order in Delivery Due List.

Hi Gurus,
I have an issue with the delivery due list, T. Code used is VL10G.
Issue :
A sales order 'X' is created and is completely delivered and also billed. The same is also confirmed if you look throught the document flow of the sales order but strangely when we execute VL10G transaction code by just entering the shipping point the sales order gets displayed.
Also there are many orders with similar order type created,delivered and billed but none of them get displayed when VL10G is executed execept for the sales order which is pointed out above.
Kindly let me know what could be the problem related to this. i.e why is that order getting displayed when VL10G transaction is executed?
Thanks.

Some of the checks you need to carry out are:-
- In document flow what is the status of the sale order ??
- Go to customer master Sales Area Data under Shipping tab, and check whether you have maintained "D" for the field "Partial delivery per item". It should have been blank.
- In copy control VTLA, for item category, field Update document flow should have been ticked and Pos./neg.quantity field should be assigned with plus indicator.
- In VOV7, for your item category, Completion Rule should be B
thanks
G. Lakshmipathi

Delivery due list not showing not confirmed parts - VL10E

Gurus,
I need some help on the delivery due list (VL10E), currently it is showing all the confirmed schedule lines but i want to see all the lines (confirmed and not confirmed). Is there any user exit we can use. Any help would be appreciated.
Thanks
Aman

Hi Amandeep,
I agree with Sai because there is no value addition to the user to see confirmed and unconfirmed lines in delivery due list.
As you already know purpose of the delivery due list is to create delivery for confirmed lines and therefore SAP shows only confirmed lines in the delivery due list. User can see all the lines in VA05 or VA05n (only available in ECC). However, if he wishes to deliver he can use VL10E which will show only confirmed lines. I don't see that there is any real use by adding unconfirmed lines to the delivery due list. Perhaps you need to convince the business on this.
Regards,
Sachin

I had problem with my apps,they open for a while and closes with in seconds i cant acess them

i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

Automatic creation of deliveries in back ground through delivery due lists

Hi ,
We are generating the delivery due list by scheduling the Vl10C tarnsaction.But Vl10C tarnsaction only generates the delivry due list.Our requirement is to create deliveries automatically through scheduled background job from this delivery due list.
Can you please let me know how can I achieve this?
regards,
sachin

Hi Sachin,
You can set up a batch job AUTO DELIVERY GENERATE using SM36 T-code
Here you can give the variant of your choice. You can make the system create delvieries based on shipping point or sold to parties or plant. All this can be set up in a variant.
To set up variant use SE38 T-code input program RVV50R10C and then select Variants radio box and then click on create.
You can also create a variant with sales organization or distribution channnel.
Once you schedule this batch job in SM37 T-code using menu and immediate schedule or on periodic basis, system will call for VL10 T-code or VL10C based on variant and will automatically generate deliveries in background. Manual interference is NOT required.
Feel free to revert back with questions if any!
Regards,
Syed Nasir

Wrong SHipping point in delivery due list VL10G

Hi All,
We are facing vague issue related to delivery due list where it shows worng shipping point with respect to order.
Order has shipping point XXXX where as in deliverydue list it shows YYYY....
We checked the table responsible for showing values (Table VEPVG) in delivery due list.. It shows wrong shipping point YYYY as well...
Any idea why there is discrepancy...
Thanks in advance for help
Ghassan

Is it possible that you have different shipping points on the sales order, i.e. different at header and item level?

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Regarding TC: VL04 execution in back ground (runing delivery due lists

Dear SAP Experts,
I have a query regarding delivery due lists.
TC: VL04 .
When I enter the shipping points ,sales area ,office and other mandatory feild and execute in foreground the deliveries are shown.
But when I do the execution in background .
In the SM37 screen the job gets cancelled.
The job log says :
Job started
Step 001 started (program RV50SBT1, variant &0000000000003, user ID PWC)
Fill in all required entry fields
Job cancelled after system exception ERROR_MESSAGE
Please explain how can I run the delivery lists without errors &
as there no incomplete procedure predefined in the VL04 screen what would be the possible solution.
Thanks in advance.
Please help me out
regards,
Amlan Sarkar

Dear friend !
Even after filling the mandatory fields the messege again pops up and job is cancelled.
When the jon ncan be executed in the foreground with all the lists of deliveries to be created appears .why do the background job scheduling not possible.
Please help?
regards,
Amlan Sarkar

Apex 4.1 - problem with navigation component LIST after upgrade

There seems to be problem with Tags in LIST component, after upgrade from 4.0 to 4.1 release

Right, we verified a problem for migrated lists.
We have lists of links, that are not based on a specific template. After upgrade to 4.1, they stopped from rendering in their region. Found out that the tag <TABLE> was not included in the HTML Source, hence the list body was not built to render.
The only way we found to include it was to create a template for Lists (there is not one by default in Apex in certain themes), edit it and include the tag (in the section "Before List Entry" > "List Template Before Rows" - the tag itself is not present in the newly created template, too). Then, you need to assign the template to the existing Lists to make the list body re-appear: it doesn't seem to be a good practice to create a list without a template, but Apex should at least provide 1 by default.
Edited by: Kleber M on Oct 28, 2011 9:03 AM

Delivery Due List Error

Hi Experts
When I try to create delivery due list from the Transaction Code "VL10C" i will get below mentioned display and from where i cannot proceed further. Kindly help me to resolve this issue.
"ACTIVITIES DUE FOR SHIPPING " SALES ORDER ITEMS"
"ORIGINDOC. SOLD- TO PA SATY"
"ITEM GI DATE DB MATERIAL OPEN QTY BUN CUMQTY SU"
+"LIST CONTAINS NO DATA"
Thanks and Regards
M.Dheerendar Jain

HI,
I think your selected the future date under Deliev.Creation date and those dates doesn't have any Deliveries , try to remove and also try like that enter the shipping point and remove all the data which is there in VL10C like delivery creation date and CalcRuleDefltDlvCrDt
Revert
Regards,
prasanna
Edited by: prasanna_sap on Aug 22, 2011 2:58 PM

Problem with Delivery due list VL10b for STO's - Orders not disappearing

Similar Messages

Maybe you are looking for