Problem with delta on Business Partner on CRM
Hi all!!
I´m trying to send delta from Business Partners on CRM. I have activated the change pointers for the message type BUS1006, object BUPA_BUP and for table BUT000 on transaction BD52.
When I create a new Business Partner an entry must be inserted on BDCPV view and is not, however When I modify a Business Partner, its corresponding entry is inserted on view.
I have seen for other message types this doesn´t occur.
Can somebody help me, please???
Thanks in advance and regards.
Hi, Ralf
Thanks ! It worked ! I had to repair the function module. I assigned the points
Edited by: Frédéric GAUTHIER on Jan 29, 2010 11:12 AM
Similar Messages
-
Transfer deltas on Business Partner from CRM to MDM
Hi all!!
I have to send the deltas on Business Partner from CRM to MDM. I know this is done with Change Pointers and the extractors.
I have the FM CRM_BUPA_EXTRACT to extract the data but I don´t know how do it.
Can someone guide me on this, please??? Is urgent.
I will be very thankful with your help.
Thanks in advance and regards,
ManuelHi Ahmed,
Check out the Delta Load settings on the CRM side.
Take input from the functional consultants around you.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra -
Problems with Import of Business Partner Marketing Attributes
Hello everyone,
I've a little problem. We are on CRM 5.0 now and I want to migrate the business partners with marketing attributes in the new system via LSMW. I've therefore wanted to implement the SAP message 609236. But I've problems with creating the function module ZCRM_MKTBP_CRMOU_WRITE 'Write marketing attributes for BP (event)'.
I copied all the source of the SAP message and I've create the export and changing parameters. But the checking programm tells me that he can not loop over the
'C_BP_STRUCT'. It 'is not defined as internal table and not in the table parameters'. But if I want to create it as a table parameter (instead of changing parameter), the following error message arrises: "Only table types may be used as the reference type for a table parameter"
What can I do here? Perhaps anyone of you has already implemented this SAP message.
Thanks in advance
NicoleAre you moving data from a SAP CRM to a SAP CRM system, or from a legacy system to a SAP CRM system?
Michael. -
To Get the list of sales orders for a Business partner in CRM.
Hi all
Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
Can anybody tell me if there is an inbuilt function module or BAPI available?
If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.Hi Jessica,
Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
You'll get a table with the documents associated to that partner, where you can work on.
Kind regards. -
I have a query relating to creation of Business Partner in CRM
Hi Group,
I have a requirement that, I need to created a Business Partner in CRM by using a BAPI. I don't have an idea of which BAPI to be used for doing this.
So please kindly provide me the details of the BAPI to fulfil this requirement.
I need your valuable suggestions on this issue.
thanks in advance.
Regards,
Vishnu.Vishnu,
You can use 'BAPI_BUPA_CREATE_FROM_DATA' to create BP's in CRM .
Look under CRM General&Framework forum,search for this BAPI you get tons of threads with examples.
Thanks,
Thirumala. -
Hi all!!
I´m trying to send delta from Business Partners on CRM. I have activated the change pointers for the message type BUS1006, object BUPA_BUP and for table BUT000 on transaction BD52.
When I create a new Business Partner an entry must be inserted on BDCPV view and is not, however When I modify a Business Partner, its corresponding entry is inserted on view.
I have seen for other message types this doesn´t occur.
Can somebody help me, please???
Thanks in advance and regards.Hi Sundeep,
Please check this PDF document on SAP business partner.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABP/CABP.pdf
Regards,
Ferry Lianto
Please reward points if helpful. -
Create or Update Business Partner in CRM ?
Dear Folks ,
Scenario is to Create or update Business partner in CRM from thirdparty system via PI
It would be great if you could clarify the following
Hope we have BAPI to create and Update Business partner in CRM system but my question is
1. Can we use any predelivered PI content - Message Interfaces - as proxies ( Server proxies ) to create BP from system ?
2. Same interface will work for Update as well ?
IF so what is that content ? where to find for our PI System ?
3. Can we use the same way for Client proxies as well when we want to update the business partner ?
4. What are the inbound and outbound Message Interfaces are available ?
Any help will be highly appreciated
Thanks.,
ShivaHi Ravi ,
I think that i am not described my question properly , Say i have CRM system where i have to create BP for this input comes from external system (forget about the system ) , Here i want to use Proxy (Server proxy ) which helps me create Business partner in CRM system .
Here my question is If sap delivers the Inbound interface ( where server proxy already generated by SAP) , which i will use to create BP ?
Can we do in this way ?
Thanks
Shiva -
Problem with delta load urgent!!
Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank youHi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh -
Delta Mechanism CRM to BW - Problem with delta update
Hi BW Gurus
Delta update from CRM - BW 3.X is not pulling all the newly added records and records which were saved with error, warning in CRM to BW
Can any one suggest me an approch to fix this issue
please let me know if you need more info
Thanks in Advance,
ShilpiHi Shilpi
Did you manage to find a solution for this problem? If so, could you please let me know how you solved it.
I am also having a problem with datasource 0CRM_SALES_ACT_1 - when I do a full load, it works, but when I try to do a Delta load, it does not bring across any data. In transaction RSA7 on the CRM source system, the entry looks like this:
Green: Delta is recorded 0CRM_SALES_ACT_1 BWQCLNT320 0
Regards
Rayan -
How to attach files to a business partner in CRM
Hi experts,
The aim is to develop a program with the same functionality as the way CRM attaches files to business partners (via a browser).
For example, I want to attach an excel file ( or whatever ) to a given Account ID via a program, so when refreshing the browser it appears there.
What steps do I have to do to achieve this?
I read that I should use the class CL_CRM_DOCUMENTS and the method CREATE_WITH_FILE, but I don't know how to link the document with the Account ID (BP)Going ahead in the development of the program I have found a new problem to face.
When seeing the details of a business partner, if I execute the program to attach new files and afterwards go back and get in again in the BP details to see the new attached files, these files aren't refreshed in the DocList.
To see them i have to log out and log in again. In that case i can see the new attached files.
I have seen the method CRM uses to do this. The name of the method triggered when pushing on the button is OP_ADDDOC2DOCLIST( ).
Do I have to use this method to refresh the DocList so i can see the attached files without having to log out?
Thank you again. -
Problems with Delta Extraction for 0CRM_OPPT_H (no data found)
Hi,
I've some problems with the Delta Extraction of the Infosource 0crm_oppt_h (CRM Opportunities Header). After initialization I get no delta data from the CRM system.
What I already did:
Activated 0crm_oppt_h Data Source (checked functionality with rsa3)
Started Info Package (Init) on BW side (worked fine)
Checked the status of the Data Source on the CRM system using BWA7 ("initial upload" is unmarked; "delta active" is marked and what makes me worry is that the column "Queue exists" in <i>unmarked</i>...)
If I change anything (like Phase, Expected Sales Vol.) in the opportunity, the Delta Extraction get no changes.
Could You help me out, please?
Best regards,
Markus Svechi Markus,
try to check oss note 788172
Release Status Released for Customer
Released on 23.03.2005
Priority Correction with high priority
Category Program error
Symptom
No data exists in delta extraction from the CRM server to the BW system for business transactions, if parallel processing is applied as per note 639072. But Data is extracted if parallel processing is switched off.ie. when BWA_NUMBER_OFF_PROCESSES is set to 1,there is data during delta. This applies to the following DataSources:
0BBP_TD_CONTR_1
0CRM_COMPLAINTS_I
0CRM_LEAD_ATTR
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_ATTR
0CRM_OPPT_H
0CRM_OPP T_I
0CRM_QUOTATION_I
0CRM_QUOTA_ORDER_I
0CRM_SALES_ACT_1
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CODES
0 CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Other terms
DataSources, BWA, initial extraction, delta init, parallel processing, no data in delta.
Reason and Prerequisites
There is an update on the generated delta table which causes data corruption in running delta initializations as the changed delta sets will be deleted with every further update on documents. An open cursor statement is there without fetch data in SMOX3_GET_DATA.
Solution
The problem is solved with the attached corrections.After applying the corrections a new initialization of the affected datasources is necessary. -
Problem in Creation of business partner
i create business partner with the help of BAPI_ISUPARTNER_CREATE_FROM_DATA
i want to add mobile number but there is no any field such like mobile number in address data table.
But there is separate table of telephone data. When i use this table to store the mobile or telephone number at that time bapi stores the data on the telephone table in independent communication but not in direct communication fields .
Please , suggest me what i do to store the data in direct communication instead of indirect communication.
Thanks for review my post...Hi ilesh,
There are 2 kinds of communication data -
1. Address dependent- this is linked to the address, and would need to be created / changed using BUPA_ADDRESS_CHANGE. You need to pass the BP number and the address number to which you want to link the tel / mobile number.
2. Address independent - this is directly linked to the BP, without dependency on the BP's address. You can modify such data using BUPA_CENTRAL_CHANGE.
Now, you can decide which fields you want filled, and accordingly use the correct FM. Second point - how to make sure the number gets created as a mobile, and not normal telephone. There is a field called R3 user in the table ADR2, and also in the Telephone structures that you fill while calling the FMs mentioned before. Make sure you pass the correct value of R3 user ( i think it is 2 for mobile, but you can check it by looking at the value range for this element in ADR2 through transaction SE11).By default, R3 user is 1, which denotes landline telephone. To create mobile numbers, pass R3 user = 2 (or whatever value you look up from the value range).
This should solve your problem.
Cheers,
Rishu. -
Problem in Creating a Business Partner Role
Hi Frns,
I am trying to create a BP Role from CAC->SAP Business Partner->Business Partner->Business partner Roles->Define BP Roles.
I copied BUP003 and given my BP Role name as ZEmp.
When i try to save it, it is giving an error message saying
"NO STANDARD ASSIGNMENT DEFINED FOR BP ROLE CATEGORY BBP003".
I have checked in BBP003 Category in the same.
What could be the problem?
Thanks in Advance
RohanHi Roshan,
You have Created a BP Role,
You must also have assgned the Same to a BP Role Category Check the Settings for BP Role Category Assignment and when Appropriate you shall Assign Std Assignment of BP Role Category to your BP Role by Selecting the Check Box
Referal Notes:
BP Role Category
Attribute of a BP role.
Use
The role category makes it possible for SAP and customer programs to program on the BP role.
Dependencies
The role category depends on a differentiation type.
Any number of BP roles can be assigned to a role category, with one role always acting as the standard role per role category.
It is possible to control the update of a role by assigning a role category to a role.
Hope it Anwers your Queries..
Thanks and Regards,
RK. -
Unable to create Business Partner in CRM
Hi I am unable to Create a Business Partner (BP)in CRM though I could see that the INBOUND IDOC ( Msg type : CRMXIF_PARTNER_SAVE_M ) is getting posted.I created the IDOC through the test transaction (we19).Also i dont have any data to give in the field PARTNER_GUID without which the IDOC was failing.So i took an existing value from the table BUT000 and used it and it posted successfully but still the BP is not getting created in the system.Request you to pls suggest a solution..
Kanth,
You dont have to populate BP IDOC with partner guid.System generates partner GUID whenever BP is created.
Try to create a BP without populating guid.
Thanks,
Thirumala. -
Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)
Good afternoon !
We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.
When we create an order and insert one item at this order, this item is processed and the price is calculated and shown correctly, both in the item and in the table of totals at the right corner(where is the Total Net Price, freight value, etc).
If we change the quantity of this item, or insert more one item(with the same or other product), the price turns to zero, both in the item(s) and in the table of totals mentioned above. Also, in the table of totals, the freight value remains being calculated, even in this cases when the prices is turned to zero.
What can be happening in this case ? What can I check to determine the cause and solve this problem ?
Thank you in advance !
WilsonGood afternoon !
This problem was solved adjusting some parameters of partner determination.
Maybe you are looking for
-
Rounding the Total Scores for Objectives and Competencies in application
Hello Where does one change the format of the total scores for the Overall Ratings and Comments in the front end /application? Currently the total scores are in the format Objectives: Total Score 3.375 Competencies Total Score 2.69230769230769 HR wan
-
Query of blanket purchase order
Hi experts can anyone explain how to do invoice verification for blanket po? thanks in advance!
-
Cross Platform HTML Email Questions
Hi, I am creating new html emails from within dreamweaver for use in a service like constant contact. The service I use is COMF5. They have a rudimentary (but nice) WSYIWYG editor so I am giving it a whirl in Dreamweaver. I first made the mistake of
-
what is an error sign 13019
-
Video lags when playing .rmvb
I have tried VLC and Boxee to stream some .rmvb videos, and there are many lags. thanks