Problem with depositioned picture boxes after export or printing

I have created a template with 20 boxes (4x5) defined as placeholders for pictures. The alignment and margins between the boxes are set to be exactly equal (it's one millimetre actually). On the screen of my MBP everything looks good. But when I print or export the file the margins start to vary. What is to be done? I have tried grouping, but it doesn't help.
Thanks for your support!

Changing the unit is not sufficient, it would be useful to check if the picts are really given the same coordinates.
Working with mm may give differences in these coordinates.
You may compress a sample document as a zip archive, attach this one to a mail and send them to my mailbox.
Click my bluename to get my address.
I would be able to look in the beast and, maybe, discover the wrongdoer.
Yvan KOENIG (from FRANCE lundi 20 octobre 2008 15:30:58)

Similar Messages

Problem with displaying picture.

I use PS-CC and LR5.on a HP i7 computer and windows 7.Camera D-800, pictures in raw.
I usually import pictures in nef in LR5,. After some corrections, I export my pictures to DNG format. I sometimes do a little bit of work in camera raw then go into Photoshop.
My problem: When in photoshop, I get a grainy version of my photo which wasn't the situation in LR5 or Camera raw, Hard to work with. The grains will disappear when I enlarge the picture but then I have to enlarge it so much that I only see or can work with only part of my picture. The problem does not appear in CS6.
Hope somebody can help me.
Thanks
Jacques Legault

I should clarify this.. When I import photos into LR5, I always use copy as
DNG. I know that NEF and DNG are the same for photoshop and I always shoot
in raw.
One thing I do not know is how to do a screen shot. I will get back tro you
on that. When I say grain, or noise if you like, I mean that, if i relate
to films, my picture in LR5 would be at ISO 100 and my screen shot in
photoshop would look like it was boosted to 1200 or worse.
See you soon I hope with a screen shot.
2014-06-14 13:43 GMT-04:00 twenty_one <[email protected]>:
Problem with displaying picture. created by twenty_one
<https://forums.adobe.com/people/twenty_one> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/6458682#6458682>

Has anyone had a problem with depositing a check with the app for Bank of America?

Has anyone had a problem with depositing a check on a bank app?

Is the check something like a payroll check where its digitally printed and all in text?, or is it a handwritten check?
from my experience handwritten checks rarely work, myself and friends have always recieved an error stating the picture was to blurry no matter how many times we took a picture. From what i have read with others who have issues with depositing handwritten checks, some checks are deemed to blurry based on the handwriting, therefore the app wont accept the check, while other handwritten check will be accepted just fine, i hope this resolves your issue's and concerns

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Problems with HP Probook 6475b after swiching computer off during full system restore

Can anyone help?I have a problem with my HP Probook after it was accidently switched off during the running of an inbuilt recovery disc to restore the computer to its original instalation. When I switch it on now it goes straight to a message that says 'Windows is loading files' and after a short while comes up with a screen which says: Windows 7RECOVERY DISC***WARNING***You are about to erase your hard drive. click the greencheck box to proceed. Performing this action will restorethe computer back to it's original Windows installaltion there is the choice of three check boxes - one green with a tick, one red with a cross and one c:\ When I click the green box after about 5 seconds there is a dialogue box entitled ' Restore Error Message'and in the box it states Error 1, with a box to click that says 'ok' If I click the ok box it returns back to the same message that Windows is loading files and goes through the same loop.I cannot get past this point. If I click the c:\ box it goes to a black dialogue box which has the following: Microsoft Windows [Version 6.1.7600]X=\windows\system32> If I put sfc/scannow the message is as follows: There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again Can anyone advise how I can get out of this 'Error 1' loop and complete the system restore?

I do have a backup of the files, but the biggest issues come with the computer shutting down. I try to save frequently, but it makes it very tedious when I have to wait for the computer to reload, relaunch photoshop and redo my work. These frequent interruptions are hurting my productivity.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Problem with flash on IE11 after using adobe cleaner

Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

I have a problem with a chart refreshing after its bound data provider changes.

I have a problem with a chart refreshing after its bound data
provider changes. After the subsetHighLowData.refresh() is called I
would expect the chart to redraw, but it still looks the same. I
even inspected the debugger to see if the slice had taken place and
it had.
Any ideas coding friends?

"nikos101" <[email protected]> wrote in
message
news:gib6aa$prr$[email protected]..
>I have a problem with a chart refreshing after its bound
data provider
>changes.
> After the subsetHighLowData.refresh() is called I would
expect the chart
> to
> redraw, but it still looks the same. I even inspected
the debugger to see
> if
> the slice had taken place and it had.
>
> Any ideas coding friends?
>
> subsetHighLowData.source =
>
highLowData.source.slice(slider.values[0],slider.values[1]);
Just use the ArrayCollection's removeItemAt, and it should
handle the event
dispatching for you.
HTH;
Amy

I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Problem with depositioned picture boxes after export or printing

Similar Messages

Maybe you are looking for