Problem with derived column

Hi friends,
[Reports 6i - 6.0.8.20.1 & DB 9.2.0.8 ]
I have problems in one report to rerieve the value of a column in my Query1 in a derived column.
Let's say that we have a query (Q1) that obtain the departments of a company.
And a second query that obtain certain data for each department of Q1 and (this is important) we can't (due to others requirements) use a "link" to join the querys.
So my idea was to create a formula column (FC1) in Q1 where the departement is stored... and, out of the query, create a derived column that would have the value of FC1.
Then ... in design model... I'll have 2 repeating frames... one based on Q1 and other based on Q2..
Q1 Frame is ok and shows all departments... but... Q2 repeating... only shows values for 1 department... So my derived column seems not to change when the value of FC1 changes...
Any ideas?
Thanks,
Jose

If your query1 is something like
SELECT ...
d.deptno,
FROM
...dept d
WHERE ...
and you want to do query2
SELECT ...
FROM ...
for all departments but then split the output on display by department.
I'd go with the suggestion from the other poster above:
Do your query1 as
SELECT ...Query1Fields,
Query2Fields
FROM Query1Tables, (put query2 here) q2
where q2.deptno = dept.deptno -- or whatever the conditions are
Or use
WITH q2 AS (put query2 here)
SELECT ...Query1Fields,
Query2Fields
FROM Query1Tables, q2
where q2.deptno = dept.deptno -- or whatever the conditions are
That second format should ensure that query2 is done as one whole unit.
Then in the data model drag and drop the query2fields outside the query1 group to form a new group below it. Then in the layout you have a repeating group based on the query1 group and within it a repeating group based on the new "query2" group.

Similar Messages

Can't change the connection string of SSIS package with derived columns?

We upgraded SQL server 2008 to 2012, copied and converted all SSIS packages from Visual Studio 2008 to 2010. When I opened a package in VS 2010 and tried to change the connection string, in the local connection managers, if the data source is another
SSIS package B(.dtsx file) with derived columns, I can't change the connection string of package B. When I opened the file connection manager editor for package B and tried to locate a dtsx file in another location, saved the change, reopened the project.
Package B still pointed to previous file. Other packages without derived columns work fine. Any thoughts?

We are using the package deployment model and refer to other packages in the same project. If
we changed the path of package B (with derived columns) to "D:\Visual Studio 2010\xxxx", and refer it in package A, in the A's connection manager, the connection string of package B is still its previous location "D:\Visual
Studio 2008\xxxx". When we ran the package A in the SQL server agent, the data source is still
"D:\Visual
Studio 2008\xxxx", so how can I change it to "D:\Visual
Studio 2010\xxxx"? Why has the package C (without derived columns) no such problem? thanks.

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

WebRowSet Problem with database columns defined as TEXT??

Hello,
Can somebody help me on this subject. (http://forum.java.sun.com/thread.jspa?forumID=31&threadID=778586)
I have the same problem with TEXT column when I try to populate the WebRowset.
Thanks,
Stephane

OK,
I change my postgresql driver for the lastest version (postgresql-8.2-506.jdbc3.jar) for JVM 1.5 and it's find...
This driver support the javax.sql.
St�phane
Edited by: Borealis on Oct 15, 2007 12:43 PM

Problem with Stacked Columns in Business Graphics

Hi,
Has anyone used the stacked columns chart type in business graphics? Am facing a problem with this.
I am using the SimpleGraphics example demo with 2 dataseries, the values ranging from 0-10. It works fine if the chart type is Columns (this is default). When I change the chart type to stacked_columns, the graph goes for a toss. The y-axis range automatically changes to 0-1 (values as 0, 0.2, 0.4 ... 1.0) and it does not display stacked columns as expected.
Is there any specific property(s) that need to be set for this chart type?
Appreciate any quick response.
cheers,
Vittal

Hi friend,
See the link below it is having the solution of hiding the columns in smart forms
Hide table columns in smart form?
Create a table to display your values with 12 col and hide the columns based on the idea provided in the link above.
I think this will solve your issue if you still have queries please revert back to me i will help you.
Thanks,
Sri Hari

Problem with dynamic columns in smartforms.

Dear SDN Experts,
I have a requirement in smartforms for dynamic columns.
i have used template with 10 columns, So from these 10 columns,Columns may vary monthly MIN 2 to MAX 10 depending on
readings with them for that month.
i cannot fix column headings also,Because headings also changes dynamically.
So Problem is if there is no data in columns,Columns is displayng empty.
For EX: In this month i have 2 columns data remaining all columns is displaying empty boxes.
Please suggest me a solution is this posible in smartforms if i use table also.
<removed by moderator>
Regrds,
MNR
Edited by: Thomas Zloch on Sep 11, 2011 3:50 PM

Hi friend,
See the link below it is having the solution of hiding the columns in smart forms
Hide table columns in smart form?
Create a table to display your values with 12 col and hide the columns based on the idea provided in the link above.
I think this will solve your issue if you still have queries please revert back to me i will help you.
Thanks,
Sri Hari

Problem with shared column mapping

I have a problem with mapping different fields onto the same column. In most cases Kodo handles it very well but one tough case it does not
Modification references contract N-1 using contract_id field
Contract back references two modifications out of all modification owned by THIS contract (last_modification and executed_modifcation)
when both modifications are not null it works fine since I make sure both fields point to modification owned by the same contract
hovewer when I set one of the fields (executed_modifcation) to null (after it was not null) Kodo attempts to set not only executed_modifcation field to null but contract_id as well. Which obviously not desired
I understand that it is a pretty hard corner case. Do you think you can handle it or it is a dead end?
Attached are my files

Abe,
I fully agree with your analysis. In my case we can use precedence of direct
mappings over reference mapping in null situation.
However as you noted, there are cases when we have only references and so
you can not say which mapping is more important. However since we are
resolving NULL issue here, I am not sure we need to know precedence of
references - not null case should always take precedence. In other words:
priority 1: direct mapping
priority 2: not null reference
priority 3: null reference
Of course all three cases are subject rule of not changing value of shared
column
"Abe White" <[email protected]> wrote in message
news:[email protected]...
I admit that I didn't go through all your metadata, but I do believe that
3.0 final will handle this case. My plan is to implement updates such
that direct field mappings always take precedence over foreign key
mappings.
Let's say column CONTRACT_ID is used by int field contractId and is
also used by field lastModification as part of an FK to a Modification
instance (which I believe is close to your mapping). Because contractId
is a simple field rather than a foreign key, Kodo will give it the final
say on nulling/defaulting the CONTRACT_ID column. So if you null the
lasetModification field, CONTRACT_ID will retain the value of the
contractId field. Any non-null value of the lastModification field will
stilly have to jive with the contractId field, though, or else we'll
throw an exception like we do currently when you try to set 1 column to
multiple values.
I believe this solves the common case of shared
columns between direct mappings and FK mappings. There are other cases
in which multiple FK mappings overlap on certain columns, and this does
not solve nulling problems in those instances. However, I think those
cases are very rare and not worth the effort. Correct me if I'm wrong
and your situation actually is one of sharing columns between multiple
FKs and no primitives after all.

Problem with last column in footer - 11G

Hello,
I have a problem with displaying sum in footer for af:table .
The footer connected to attributeValues which defined in the pageDef.
I have 3 columns in the footer, the two first are shown fine, but last one is empty , althouh they are defined the same way.
Replacing the order of columns did not resolve the problem, because still the last column is not shown.
Any help will be appriciated.
pageDef:
<attributeValues id="BalancesDetailsViewSumCountUsed"
IterBinding="InitBvBalancesDetailsViewIterator">
<AttrNames>
<Item Value="SumCountUsed"/>
</AttrNames>
</attributeValues>
<attributeValues id="BalancesDetailsViewSumDifference" IterBinding="InitBvBalancesDetailsViewIterator">
<AttrNames>
<Item Value="SumDifference"/>
</AttrNames>
</attributeValues>
Jspx:
column c2 is fine , but c3 is empty
<af:column sortProperty="CountUsed" sortable="false" id="*c2*"
headerText="#{res['balances.countUsed']}" width="80px">
<af:outputText value="#{row.CountUsed}">
<f:convertNumber groupingUsed="false"
pattern="#{bindings.BalancesAMBalancesDetailsView.formats.CountUsed}"/>
</af:outputText>
<f:facet name="footer">
<af:outputText value="#{bindings.BalancesDetailsViewSumCountUsed.inputValue}">
<f:convertNumber groupingUsed="false"
pattern="#{bindings.BalancesDetailsViewSumCountUsed.format}"/>
</af:outputText>
</f:facet>
</af:column>
<af:column sortProperty="Difference" sortable="false" id="*c3*"
headerText="#{res['balances.difference']}" width="80px">
<af:outputText value="#{row.Difference}">
<f:convertNumber groupingUsed="false"
pattern="#{bindings.BalancesAMBalancesDetailsView.formats.Difference}"/>
</af:outputText>
*<f:facet name="footer">*
*<af:outputText value="#{bindings. BalancesDetailsViewSumDifference.inputValue}">*
*<f:convertNumber groupingUsed="false"*
*pattern="#{bindings. BalancesDetailsViewSumDifference.format}"/> </af:outputText>*
*</f:facet>*
</af:column>
Thanks!

Thanks you all!
I found the problem. The iterator which sum the coulmn was at the last after the second sum, so it return null.
So I replaced the hasNext() function with getAllRowsInRange() and now it is OK.

Problem with two-column layout

Hello,
I've done table-based layouts for several years, but I'm
trying to switch to CSS. I still have a lot to learn...
I'm trying to create a web site as a favor for a friend. She
hasn't figured out what she wants yet, so I've just been creating
some pages using canned designs. I created one using "Two-column
left nav" under Dreamweaver's "Page designs (CSS)":
http://www.alcie.org/demo2/
I want a fixed-width left navigation column and a fluid
content column.
I ran into several problems with the original design. The
most notible was that if I changed the browser window width, both
the content and nav columns would resize. I didn't want that, so I
set "navBar" width: 150px. That worked, but if I make the window
too narrow, the content starts to overlap the navigation column in
Firefox 1.5.0.6, and the navigation DIV drops to below the content
in IE 7 rc (I think) 3 and IE6. I tried removing the width
altogether, but that made things worse.
What is wrong with this picture? Is there a cleaner way to
solve my problem?
Thanks.

> Is there a cleaner way to solve my problem?
Yes - dump that layout. It's too quirky. Go here and grab one
http://www.maxdesign.com.au/presentation/page_layouts/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Clean & Sober" <[email protected]>
wrote in message
news:edgvl4$akl$[email protected]..
> Hello,
>
> I've done table-based layouts for several years, but I'm
trying to switch
> to
> CSS. I still have a lot to learn...
>
> I'm trying to create a web site as a favor for a friend.
She hasn't
> figured
> out what she wants yet, so I've just been creating some
pages using canned
> designs. I created one using "Two-column left nav" under
Dreamweaver's
> "Page
> designs (CSS)":
>
>
http://www.alcie.org/demo2/
>
> I want a fixed-width left navigation column and a fluid
content column.
>
> I ran into several problems with the original design.
The most notible
> was
> that if I changed the browser window width, both the
content and nav
> columns
> would resize. I didn't want that, so I set "navBar"
width: 150px. That
> worked, but if I make the window too narrow, the content
starts to overlap
> the
> navigation column in Firefox 1.5.0.6, and the navigation
DIV drops to
> below the
> content in IE 7 rc (I think) 3 and IE6. I tried removing
the width
> altogether,
> but that made things worse.
>
> What is wrong with this picture? Is there a cleaner way
to solve my
> problem?
>
> Thanks.
>

Problems with varchar2 column and a select statement

Hi to all,
I am new to ODP...so I would really appreciate your help..
I am having problems with using the following code:
con.ConnectionString = "User Id=bla;Password=bla;Data Source=bla;";
string cmdQuery = "SELECT * from try where data ="+textBox1.Text+"";
OracleCommand cmd = new OracleCommand(cmdQuery);
cmd.Connection = con;
cmd.CommandType = CommandType.Text;
OracleDataReader reader = cmd.ExecuteReader();
while (reader.Read())
MessageBox.Show(reader.GetString(0)+"");
cmd.Dispose();
con.Close();
where:
data is the name of a field in the table
textBox1 is the name of a text box where the user inserts the values..
The error that appears is "Invalid identifier"..
I hope it makes sense...and please help...

Hi,
I'm fairly sure it IS the single quotes actually. Print out the string you're trying to excute, then try it outside odp.net, does it work?
For example:
SQL> select * from dual where dummy=foo;
select * from dual where dummy=foo
ERROR at line 1:
ORA-00904: "FOO": invalid identifier
SQL> select * from dual where dummy='foo';
no rows selected
Cheers,
Greg

Problem with checkbox column in ALV popup (ABAP)

Hi, the problem is: I've created the code below for maintaining a popup with an ALV table inside. One of the column is a checkbox field. When I run first time the popup, it run well, when I clode the popup window and then I run for second time the popup, i see all the columns except those with the checkbox. Someone else have encountered the same proble, if yes someone could me explain that? Here's the code:
method WDDOINIT .
data: l_ref_cmp_usage type ref to if_wd_component_usage.
l_ref_cmp_usage =   wd_This->wd_CpUse_ALV( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
DATA: l_ref_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
l_ref_INTERFACECONTROLLER =   wd_This->wd_CpIfc_ALV( ).
data:
l_VALUE type ref to Cl_Salv_Wd_Config_Table.
data: l_tabset type ref to IF_Salv_Wd_Table_SETTINGS.
l_VALUE = l_ref_INTERFACECONTROLLER->Get_Model( ).
l_tabset ?= l_value.
l_tabset->set_read_only( abap_false ).
l_tabset->SET_VISIBLE_ROW_COUNT( 15 ).
l_tabset->set_width( '500' ).
l_tabset->SET_DESIGN( VALUE = CL_WD_TABLE=>E_DESIGN-ALTERNATING ).
data:
    lr_std_functions type ref to if_salv_wd_std_functions,
    l_table          type ref to if_salv_wd_function_settings.
lr_std_functions ?= l_value.
lr_std_functions->SET_EXPORT_ALLOWED( Abap_false ).
lr_std_functions->SET_VIEW_LIST_ALLOWED( Abap_false ).
lr_std_functions->SET_PDF_ALLOWED( Abap_false ).
lr_std_functions->SET_DIALOG_SETTINGS_ALLOWED( Abap_off ).
lr_std_functions->SET_DIALOG_SETTINGS_AS_POPUP( Abap_off ).
lr_std_functions->SET_DISPLAY_SETTINGS_ALLOWED( abap_off ).
lr_std_functions->SET_EDIT_APPEND_ROWS_ALLOWED( abap_off ).
lr_std_functions->SET_EDIT_APPEND_ROW_ALLOWED( abap_off ).
lr_std_functions->SET_EDIT_CHECK_AVAILABLE( abap_off ).
lr_std_functions->SET_EDIT_DELETE_ROW_ALLOWED( abap_off ).
lr_std_functions->SET_EDIT_INSERT_ROWS_ALLOWED( abap_off ).
lr_std_functions->SET_EDIT_INSERT_ROW_ALLOWED( abap_off ).
lr_std_functions->SET_PDF_ALLOWED( abap_off ).
data: lr_column   type ref to cl_salv_wd_column.
instancing check box
data: lr_checkbox type ref to cl_salv_wd_uie_checkbox.
create object lr_checkbox
          exporting
            checked_fieldname = 'CHECK'.
lr_checkbox->set_read_only( value = abap_false ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'CHECK' ).
lr_column->set_cell_editor( lr_checkbox ).
endmethod.
Thanks for answers.

This is just some guessing - but try and set a breakpoint in the wddoinit of your popup. I'm betting that it isn't being executed on the second call because the original instance is reused.
Take a look at the properties on the view for the popup. You might try changing the lifetime of the view from "framework controlled" to "when visible".

Problem with loading column chart in flex2

Hi All,
I am facing a strange problem in designing a column chart. I have a page where i have two column charts. The data providr for both the charts is same. I have an xml with three categories of values, and each chart uses two of these with one of them being common and they are actually sorted based on one of those values. The problem here is that one chart shows proper values while the other (though shows proper values) it doesnt render it properly in the sense that the height of the columns and the value of that particular column are not consistent. What could be the issue????

It's necessary to discard the white spaces.
Set the ignoreWhite property to true.
document.ignoreWhite = true;
Regards,
Erick Souza | ericksouza.com

Problem with Incident_date column in CS_INCIDENTS_ALL_B table

Hi everyone,
I am using date range search in CS_INCIDENTS_ALL_B table using the column INCIDENT_DATE. As this is a standard table, a index is already defined there on the column INCIDENT_DATE.
If I am using the following query: [26-OCT-2010 is today's date]
SELECT *
FROM cs_incidents_all_b
WHERE incident_date BETWEEN TO_DATE ('25-OCT-2010 00:00:00',
'DD-MON-RRRR HH24:MI:SS'
AND TO_DATE ('26-OCT-2010 23:59:59',
'DD-MON-RRRR HH24:MI:SS'
the Explain plan is showing following values for Cost, Bytes and Cardinality:
Cost:4 Bytes:559 Cardinality:1
If I am running the same query for the date range '01-OCT-2010' and '02-OCT-2010'
SELECT *
FROM cs_incidents_all_b
WHERE incident_date BETWEEN TO_DATE ('01-OCT-2010 00:00:00',
'DD-MON-RRRR HH24:MI:SS'
AND TO_DATE ('02-OCT-2010 23:59:59',
'DD-MON-RRRR HH24:MI:SS'
Explain plan is showing following values - Cost:3,643 Bytes: 2,217553 and Cardinality: 3,967. [this query is taking more time compared to above one].
As per my notice, this cost is not depending on the number of rows resulting from the query. This is because, the number of rows resulted in first query (25-OCT-2010 to 26-OCT-2010) is 120 where as number of rows from second query (01-OCT-2010 and 02-OCT-2010) is only 2.
If I increase the date range such that the duration is 1 month, the cost is still increasing and Index range scan is not being used at all.
Please suggest me how can I write a query that results in a same cost and execution time for all the date ranges.
Thanks in advance,
Sam

In 11.5.9, the problem and resolution codes are stored in FND_LOOKUP_VALUES table with lookup type as 'REQUEST_PROBLEM_CODE' and 'REQUEST_RESOLUTION_CODE'. I'm hoping you could still use these tables to find problem codes, even if you were on 11.5.10 or R12.
Join would be something like:
WHERE fnd_lookup_values.lookup_type = 'REQUEST_PROBLEM_CODE'
AND fnd_lookup_values.problem_code = cs_incidents_all_b.problem_code
Regarding restricting the query for Depot Repair service requests, you need to restrict by the the incident_type_id for this type of SRs (like id for Depot incident type is 10003 for us).
HTH
Alka

Problem with derivation of tree-like structure by means of query

Hi.
My name is Viktor. I'm from Russia so sorry for my English:)
You know I have the following problem:
Input data: For example, I have the following table with hierarchy (where ParentID is ID of the parent element in the same table, also we dont know the amount of levels in hierarchy previously).
Input table:
ID --------------Name----------- ParentID
1 ----------------Russia------------- Null
2 ----------Centr. Fed.Circle------ 1
3 -----------South.Fed.Circle------ 1
4 -----------Moscow region ---------2
5 --------------Podolsk ----------------4
Tell please how to receive the broach of that table with hierarchy by means of hierarchical query (or group of queries) to the following table:
Result table:
Attribute1------ Attribute2------------ Attribute3------------ Attribute4
Russia--------------Russia ----------------Russia------------------Russia
Russia -------Centr. Fed.Circle -----Moscow region --------Podolsk
Russia -------South.Fed.Circle ------South.Fed.Circle -----South.Fed.Circle
That is I need that the input table with the hierarchy would expand in the corresponding amount of columns in the result table (it depends on the amount of level in the input table) and would in due order, that is where we havenot value for level (for example we havenot values for the element Russia (first row in column Attribute1 in the result table in the following columns: Attribute2, Attribute3, Attribute4) we must fill these columns by the value from previous level.
I think you understood my task. If necessary i can give eхplanation more. Thanks for help.
Best regards, Viktor
Edited by: user8017496 on 10.02.2009 10:39
Edited by: user8017496 on 10.02.2009 10:52

Hi,
Below is a dynamic solution for SQL*Plus.
If you want to do this in PL/SQL, this should show you how.
--     ***** Start of dynamic_pivot.sql *****
-- Suppress SQL*Plus features that interfere with raw output
SET     FEEDBACK     OFF
SET     PAGESIZE     0
-- Preliminary query to write 2nd, 3rd, ... SELECT columns
SPOOL     p:\sql\cookbook\dynamic_pivot_subscript.sql
WITH     got_path     AS
     SELECT     LEVEL                     AS lvl
     FROM     input_table
     START WITH     parentid     IS NULL
     CONNECT BY     parentid     = PRIOR id
SELECT     ',     MAX (NVL (REGEXP_SUBSTR (path, ''[^/]+'', 1, '
     ||      TO_CHAR (LEVEL + 1)
     ||     '), name))     AS attribute'
     ||      TO_CHAR (LEVEL + 1)
FROM     dual
CONNECT BY     LEVEL     <     (
                    SELECT     MAX (lvl)
                    FROM     got_path
SPOOL     OFF
-- Restore SQL*Plus features suppressed earlier
SET     FEEDBACK     ON
SET     PAGESIZE     50
-- Main Query
WITH     got_path     AS
     SELECT     name
     ,     LEVEL                    AS lvl
     ,     SYS_CONNECT_BY_PATH (name, '/')     AS path
     FROM     input_table
     START WITH     parentid     IS NULL
     CONNECT BY     parentid     = PRIOR id
,     cntr     AS
     SELECT     LEVEL     AS n
     FROM     dual
     CONNECT BY     LEVEL     <=     (
                         SELECT     MAX (lvl)
                         FROM     got_path
SELECT     MAX (NVL (REGEXP_SUBSTR (path, '[^/]+', 1, 1), name))     AS attribute1
@p:\sql\cookbook\dynamic_pivot_subscript.sql
FROM     got_path
JOIN     cntr          ON n     <= lvl
GROUP BY     name;When I used the dynamic_pivot_subscript.sql on the folder p:\sql\cookbook, you can use any file on any folder available from your SQL*Plus client machine.
I'm not saying that there's anything wrong with 3 rows of output. I'm only saying that I don't understand why you want 3 rows, and why you want those 3 rows. If I understood the problem, then I could probably show you a solution.
I don't mind explaining things that you don't understand, but I don't want to waste time explaining things that you already do understand.
Fell free to ask specific questions.

Problem with Matrix columns of type Float

Hi all!
I need to show in a matrix column a quantity with the number of decimal set in SBO. My code is:
Dim dt As SAPbouiCOM.DataTable = oFrm.DataSources.DataTables.Add("PCKG")
dt.Columns.Add("clQta", SAPbouiCOM.BoFieldsType.ft_Float, 30)
oCl = oGrid.Columns.Add("clQta", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oCl.Width = 100
oCl.TitleObject.Caption = tr.getTranslation("clQta") '"Quantità"
oCl.DataBind.Bind("PCKG", "clQta")
In this way the number of decimal that i see is 2 because the field type is Float, but in SBO parameterization i have set 4 decimal and would like to see the same number of decimal set in SBO parameterization.
How can I do?
Thanks

Hi,
If i know well, this is now a limitation of B12007 version. in 8.8 this problem will be resolved.
othwewise of you set all the prices, Quantities, Sumarizes to 4 it will display for. I think it is now displaying the Quantity settings. (float)
Regards,
J.
Edited by: János Nagy on Oct 7, 2009 12:50 PM

Problem with derived column

Similar Messages

Maybe you are looking for