Problem with desaturation when opened in ACR
When I open a .jpg image as camera raw (v. 6.2.0.29), then immediately save that image as a .jpg (quality 12) from CS5 (v. 12.0.1x32) without any edits (but as a different file name), the newly saved .jpg is significantly desaturated in color when compared with the original. This does not occur if I open the .jpg without going through ACR and then immediately save (as a new file name) without any edits.
In puzzling over this, I've also noticed that when I open a .jpg in CS5 as a camera raw, then immediately open the same .jpg without going through camera raw and compare them side-by-side, there are significant differences between the two histograms.
What in the world am I doing wrong? Since it only happens when I open a .jpg as camera raw, and not in CS5 apart from ACR, I'm guessing that it has to be something in ACR. However, I have not yet been able to find a problem with the settings in ACR, and no changes I have made in ACR seem to affect the outcome.
Any ideas what I'm doing wrong, or where I might go looking?
Thanks in advance...
ACB
Check the ACR output colorspace; it's identified in the link at center bottom. If it's ProPhoto then your jpegs will look very unsaturated when viewed in a non-color managed application, such as Internet Explorer. Click on the link to change to sRGB for general email and web output.
Richard Southworth
Similar Messages
-
Problem with fonts when opening a pdf in Illustrator
Hi all! I'm working on a pdf. I do NOT have the original. So I've found it's easier to open the pages in Illustrator, make edits, and resave as a pdf. The problem is that Illustrator is converting some text to outlines. It is saying I don't have the font, but I do. In fact, on the same page I'll have 4 lines... and some will be converted to outlines and some won't... and they are all the same font. Is there a way to tell Illustrator to NOT convert the font to outlines? I don't mind if it uses a substitute font... it's easy to go in and change the font to the right font. But I don't want the text converted to outlines. Thanks.
Julie
PS I'm using CS 4 on a Mac.Thanks, Scott. But I'm not sure what you mean by "pretty standard." Are you saying this is, in fact, default behavior in AI 14?
I'm still at AI 12 (CS2), and "standard" behavior (when the font is not available) is for Illustrator to do a font substitution, not automatically convert the type to outlines.
Is this, perhaps, what the new 'Missing Glyph Protection' does in AI 14 (as Myle suggested in post #1)?
If, in fact, this is the new default behavior, I would hope that Illustrator provides a warning (and an option to not proceed) given the highly destructive nature of converting type to outlines. -
Problems with Siri when opening apps?
I was wondering if anyone else might have some insight on this. Whenever I try to have Siri open an app for me, it tells me that I don't have an app with that name. It doesn't matter what app it is, it always tells that i don't have the app. It's working fine everything else. Just not for opening apps. It's on my iPhone running IOS 7.0.4
Hello, Wildwestgunner.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through as it may help with this issue.
iOS: Troubleshooting Siri
http://support.apple.com/kb/ts4079
Cheers,
Jason H. -
When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?
Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN -
I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
What should I do?It's a scam. Have a look at this thread:
https://discussions.apple.com/thread/6058094?tstart=0 -
CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?
To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore. -
I have problems with Gmail when I open it in Firefox. The button "write a letter" doesn't work
Dear Firefox team,
I have problems with Gmail when I open it in Firefox. The button "write a letter" doesn't work. On the page it is seen as if the page is being downloaded but in fact not. As a result, I can't neither write new letters no reply to received mail.
Best regards,
Alla Khv-> If images are missing then check that you aren't blocking images from some domains. See:
http://kb.mozillazine.org/Images_or_animations_do_not_load
-> Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
-> Check that images are enabled: Tools > Options > Content: [X] Load images automatically
-> Check the exceptions in Tools > Options > Content: Load Images > Exceptions
-> Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
-> There are also extensions (Tools > Add-ons > Extensions) that can block images.
Troubleshooting extensions and themes
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working. -
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
Hi I have problem with itunes, i opened by mistake song in itunes and after my itunes were like deleted ? Can you help me please ?
For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps youshouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
Problems with navigation when deploy application on WebLogic 10.3
Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM -
Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?
Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Problem with SDO_relate when using polygons with holes.
I'm having a problem with sdo_relate. I'm trying to extract all elements from a point table (bdtq_batim_p) that are inside a specific polygon from another table (SDA_MUNIC_SS). The spatial index for both table have been rebuilt and the data from both table is valid.
When I do a count on the query, I know the answer should be 1422 elements (Counted in ArcGIS). However, sdo_relate gives a smaller number of elements in the result set.
The query :
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and sdo_relate( t.SHAPE,s.SHAPE,'mask=anyinteract querytype=window') = 'TRUE'
returns 282 elements. The query with mask=inside, SDO_Anyinteract() and SDO_inside() all give the same result.
I did a test with the following query and the result is 1422 (which is the good result).
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE';
It's important to note that the polygone (from SDA_MUNIC_SS) that is used for this query have holes in it. I have the same problem with all the polygons from the SDA_MUNIC_SS table that have holes in it. For the polygon without holes, the results are the same for the 2 queries.
My question are :
Why are the result from the two queries different? A query with a buffer of 0 should always return the same result as a query with Anyinteract.
Is there a known problem with SDO_RELATE when using a polygon with holes in it?
Do you have any idea how to solve my problem.Since i don't have much control on the version of Oracle and Patches that we use in the system, we used a workaround that detects the polygons with holes and uses the SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE' operator in those case. We saw a slight decline in performance but it now returns the right results. When the system will be patched, we'll come back to the original version and see if the problem is solved.
-
I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.
Hi
Can You
Go up to File Menu in iDVD - and here down to
Save as a DiskImage
If this works - You can burn Your DVD in another way via Disk Util tool
Yours Bengt W -
Strange problem with SQLPLUS when client and server on the same box
Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AMuser11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.
Maybe you are looking for
-
Constructing a buffer to hold bytes going to socket
I'm a newbie and struggling with a project to construct a multi-threaded Web server that enables a browser-client to access an HTML file. I've constructed a 1K buffer, but if I want to examine various file transfer rates with different file sizes, I
-
Applying payments against Sales Orders
In 2005A SP01, you can't apply an incomming payment to a Sales Order. In the US version of 2007A, it seems that you can apply a payment to the Sales Order. I haven't been able to get this to work in the Australian version of 2007A. Anyone know if it
-
Is it possible to Add to Multi-Select Lov through Customization?
Hi All, I have a Oracle Seeded page( Oracle Training Administrator). Clients wants a new field with Multi-Select LOV on that. Is is possible to create Multi-Select LOV through Customization or changing the page in JDeveloper? As per OAF Developer gui
-
I'd like to make a script that can find paragraphs I have given tags. The script is also going to replace those. Would appreciate anything on the topic that could get me started.
-
1. Is there anyway to make what you write on the PDF with the marker tool permanent? 2. Is there a way to make it so the form can have an area for the user to upload a file?