Problem with Design View display

Hi,
Working happily in Design view using RH 10, and from one moment to the next the Design View display changed. The font display has changed to a truncated style and the word wrap has disappeared.
I tried rebooting and then reinstalling and no luck in getting rid of the issue.
The output is fine and as expected, so I am presuming that it isn't the CSS. Which I haven't edited for eons anyway so it really shouldn't be that anyway.
This is happening on all my help projects - each with a different CSS - so it can't be the css unless RH did some sort of strange global change behind the scenes without my knowledge.
Any thoughts on how to get Design View to display normally would be much appreaciated,
Thanks,
Tannis

Hi there
One possible suspect you may be unaware of is pressing and holding the Ctrl key as you rotate the wheel of a mouse. There may be a keyboard shortcut that would do this too.
Cheers... Rick

Similar Messages

Problem with Design View in DW5

I've recently inherited responsibility for my group's website (despite the fact that I'm kind of a noob at all this) and am dealing with an interesting challenge that I hope someone can help me with.
It seems that our pages are based on a number of templates that for some reason were not saved along with the rest of the site. Short term this is not a huge issue, as the pages have the source code from the templates embedded in them, but this code is not editable and I can't figure out a way to override the fact that I'm "locked out" from making any changes (at least from within Dreamweaver). Up to now I've just been editing the pages individually in Komodo, which is tedious but not horrible, given that our site isn't that big, but it's clearly no way to do business in the long term.
So I'm trying to re-engineer some templates that I can work with. What I did was use Komodo to strip away all of the template-related language from one of the site pages, and re-imported the code back into Dreamweaver, in the hope that I can then save that as a new template. I'm close, but not quite there. My problem is that DW's Design View isn't rendering the page properly, even though it displays fine in Live View and in browsers. Maybe this isn't a huge deal, but it's really bugging me because: 1) I do rely on Design View, since I'm not an experienced programmer; and 2) I'm kind of anal retentive.
To see what I'm talking about, here is the page I used as the foundation for creating a new template:
http://iodp.ldeo.columbia.edu/TOOLS_LABS/TRIPLE/aps.html
... and here is my new "template" (although I haven't saved it yet as a DW template):
http://iodp.ldeo.columbia.edu/TOOLS_LABS/TRIPLE/test3.html
The second page displays correctly in Live View, Safari and Firefox, but not in DW's Design View, where it looks like this, at least on my computer:
As you can see, there's an odd "break" between the banner image and the menus on the left, and the body of the page, which should appear to the right of the menus on the left, is instead underneath them. I'm at a loss as to why the same code displays properly for the first page, but not the second.
I guess my questions are as follows:
1) Does anyone else get the same messed up display in DW's design view if they import the second page into DW?
2) And if so, can you pinpoint where the problem is?
I hope I've explained this clearly and would really be grateful for help. Thanks!

Validate your code and fix errors. #1 problem is the lack of a valid Document Type Declaration (DTD) on line 1 of HTML code.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
To add a DTD in DW:
Go to Modify > Page Properties > Title/Encoding.
Select document type from drop list. I recommend HTML 4.0 Transitional.
Hit Apply & OK.
Repeat Steps 1 - 3 on remaining site pages.
I'm not a huge fan of DW Templates (.dwt). I don't know how big your site is but it might be simpler to disconnect from Templates, giving you freedom to edit anything you wish. Then use Server-Side Includes (SSIs) for common site wide elements such as menus, headers & footers.
The great thing about SSIs is that you only need to edit one file, save it and upload to server. Site pages are automatically updated by the server. With Templates, you have to upload every child page each time you change your template. Even on small sites, this is tedious.
Server-Side Includes
http://www.smartwebby.com/web_site_design/server_side_includes.asp
More on Server-Side Includes
http://forums.adobe.com/message/2112460#2112460
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Problems with design view after moving to new imac

Moved CS4 Dreamweaver from my Mac Mini intel duo to a new i5 Imac last night: suddenly design view is not showing various CSS styles, especially certain links.
For example, instead of this:
HOME | ABOUT | CONTACT | HELP
it will show this in design view:
|||
Meanwhile, in a browser live on the web, everything is fine.
I did a fresh install of dreamweaver CS4 last night from original install disks to new i5 Imac.
Help!

Culprit is the classic MS Windows font ARIEL. I installed it one at a time from two different sources (a 1999 TT build and a 2001 TT build) and both immediately caused problems, particularly in Dreamweaver with vanishing text in design view for any fonts setting sassigned the "ariel, helvetica sans serif family").
Since problem only is happening on the 2011 i5 Imac (but not on my old Mac Mini 1.6 or emac G4) I will guess the dilemma resides with fontbook or something peculiar to font management on the iMac.
Removing font of course solved all problems.

Problem with design view (DW8)

Page display correctly in IE7 browser but not in design view.
Right sidebar is appearing in the middle of the page. Page is using
CSS and the div is using float left.
Can someone tell me what the possible issues could be?
Thanks

jdrhost wrote:
> Page display correctly in IE7 browser but not in design
view. Right sidebar is
> appearing in the middle of the page. Page is using CSS
and the div is using
> float left.
Design view is not WYSYWYG. It's very good, but not perfect.
Preview in
browser is the only accurate check of how a design will be
rendered.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problem with repaint of display after a click event

Hi,
I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
I don't know why.
Any suggestions?
Please help me.

modified your code little
don't draw in keyPressed
import java.io.IOException;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class PlayerCanvas extends Canvas implements CommandListener{
     Display display;
     Displayable dsp11;
private Image play, pause, stop, next, previous = null;
private int gamcode;
private Command quitCmd = new Command("Back", Command.ITEM, 1);
public PlayerCanvas(Display display,Displayable dsp11){
     this.display =display;
     this.dsp11 =dsp11;
     addCommand(quitCmd);
     createController();
     setCommandListener(this);
     display.setCurrent(this);
          protected void paint(Graphics g)
          g.setColor(255,200,150);
          g.fillRect(0, 0, getWidth(), getHeight());
          if (play != null){
          g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
          if (stop != null){
          g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
          if (next != null){
          g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
          if (previous != null){
          g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
               /////this will draw on key UP
               g.setColor(0,0,0);
               System.out.print(gamcode);
               if(gamcode==Canvas.UP){
                    g.drawString("PROVA",10, 0, 0);
               }else if(gamcode==Canvas.DOWN){
                    g.drawString("DIFFERENT",10, 30, 0);
private void createController()
try {
play = Image.createImage("/icon3.png");//replace your original images plz
pause = Image.createImage("/icon3.png");
stop = Image.createImage("/icon3.png");
next = Image.createImage("/icon3.png");
previous = Image.createImage("/icon3.png");
} catch (IOException e) {
play = null;
pause = null;
stop = null;
next = null;
previous = null;
if (play == null){
System.out.println("cannot load play.png");
if (pause == null){
System.out.println("cannot load pause.png");
if (stop == null){
System.out.println("cannot load stop.png");
if (next == null){
System.out.println("cannot load next.png");
if (previous == null){
System.out.println("cannot load previous.png");
          protected void keyPressed(int keyCode)
               repaint();
               if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
                    gamcode = UP;
                    repaint();
                    else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
                         gamcode =DOWN;
                         repaint();
          else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
          else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
          public void commandAction(Command arg0, Displayable arg1) {
               // TODO Auto-generated method stub
               if(arg0==quitCmd){
                    display.setCurrent(dsp11);
}

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem with hotmail calendar display

Problems with hotmail calendar display.

I am almost a total computer novice and am having what I think is the same problem Just got my first Apple computer (Macbook Pro). MSN Hotmail is my email account. All the events on my 'hotmail' account are now unreadble because they are squished to the left side of the screen and I don't find any instructions as to how to fix this in the system. This problem didn't exist when I first started using my MAC two days ago, but now I'm stuck. Everything else in my 'hotmail' seems to work fine. Don't know what Chrome or Firefox is or if there is a cost for them. Also, have never downloaded a program if any kind.
My calendar is critically important to me and I don't have a clue as to what to do now. Hope you can help.
Thanks. Linda

Problems with Street View

new street view from new google map release shows black screen

I'm having similar problems with Street View on openSUSE. For the time being you can try to switch back to the classic Google Maps.
https://support.google.com/maps/answer/3045828?hl=en&ref_topic=3093612

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

Flickering problem with live viewing with IMAQ Image Display

Hi everyone,
I am trying to write a program to do live imaging with Andor camera. I am using some examples from Andor. The images are acquired in sequence and send into IMAQ Image Display and also Intensity Graph. There is minimal flickering issue in the Intensity Graph but there is very bad flickering problem in IMAQ Image Display. Perhaps I misunderstand how to optimize the vision tools. Does anyone know how to overcome this issue? I have attached the code that I am testing. Thanks in advance.
Best regards,
Han Yen
Solved!
Go to Solution.
Attachments:
iXonRTA_live_0.0.1.vi ‏70 KB

You can use Vision Assistant to test our vision functions. Vision Assistant is really meant to prototype - it does not have all teh functionality of Vision Development Module and is not as flexible as we don't allow you access to all the settings for every function.
I recommend starting in Vision Assistant and then porting over to LabVIEW or C (whatever you are most comfortable with)...this is built-in functionality. There is nothing wrong with using Vision Assistant to do live imaging, just that you run into limitations and you will only be able to use this code on computers that have Vision Assistant.
Hope this helps.
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision

Trouble with Design view

Can anyone tell me why I cant see my table, images and forms
in design view but i can in code view? I cant give you a link to
the page though as I am between hosts at the moment.

Same solution for you as for others. Check your Display
Styles enabling.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ProfFritz" <[email protected]> wrote in
message
news:[email protected]...
>I am having a similar problem: I cannot see any of the
changes in design
>view
> but when I F12 into a browser window all of the changes
are there. This
> is
> happening to all my documents.
>
> Here is the code from the latest one which I constructed
from the 2 column
> fixed layout with header and footer.
>
> Prof. Fritz
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
> <style type="text/css">
> 
> </style></head>
>
> <body class="twoColFixLtHdr">
>
> <div id="container">
> <div id="header">
> <h1>The Lives of the Buddha</h1>
> </div>
> <div id="sidebar1">
> <h3>Sidebar1 Content</h3>
> <p>The background color on this div will only show
for the length of
> the
> content. If you'd like a dividing line instead, place a
border on the left
> side
> of the #mainContent div if it will always contain more
content. </p>
> <p>Donec eu mi sed turpis feugiat feugiat. Integer
turpis arcu,
> pellentesque eget, cursus et, fermentum ut, sapien.
Fusce metus mi,
> eleifend
> sollicitudin, molestie id, varius et, nibh. Donec nec
libero.</p>
> </div>
> <div id="mainContent">
> <h1> Main Content </h1>
> <p>Lorem ipsum dolor sit amet, consectetuer
adipiscing elit. Praesent
> aliquam, justo convallis luctus rutrum, erat nulla
fermentum diam, at
> nonummy
> quam ante ac quam. Maecenas urna purus, fermentum id,
molestie in,
> commodo
> porttitor, felis. Nam blandit quam ut lacus. Quisque
ornare risus quis
> ligula.
> Phasellus tristique purus a augue condimentum
adipiscing. Aenean
> sagittis.
> Etiam leo pede, rhoncus venenatis, tristique in,
vulputate at, odio.
> Donec et
> ipsum et sapien vehicula nonummy. Suspendisse potenti.
Fusce varius urna
> id
> quam. Sed neque mi, varius eget, tincidunt nec, suscipit
id, libero. In
> eget
> purus. Vestibulum ut nisl. Donec eu mi sed turpis
feugiat feugiat.
> Integer
> turpis arcu, pellentesque eget, cursus et, fermentum ut,
sapien. Fusce
> metus
> mi, eleifend sollicitudin, molestie id, varius et, nibh.
Donec nec
> libero.</p>
> <h2>Theravada</h2>
> <p>Lorem ipsum dolor sit amet, consectetuer
adipiscing elit. Praesent
> aliquam, justo convallis luctus rutrum, erat nulla
fermentum diam, at
> nonummy
> quam ante ac quam. Maecenas urna purus, fermentum id,
molestie in,
> commodo
> porttitor, felis. Nam blandit quam ut lacus. Quisque
ornare risus quis
> ligula.
> Phasellus tristique purus a augue condimentum
adipiscing. Aenean
> sagittis.
> Etiam leo pede, rhoncus venenatis, tristique in,
vulputate at, odio.</p>
> <h2>Mahayana</h2>
> <p>Mahayana Buddhism predominates in East
Asia.</p>
> </div>
> <br
> class="clearfloat" />
> <div id="footer">
> <p>Footer</p>
> </div>
> </div>
> </body>
> </html>
>
>

Problem with data not displaying in website

Hello All,
I am having a problem with one of our applications. It is written in ColdFusion and uses SQL server. The problem that we are having is when we use the URL Http://bma.com (that is not actually the site name) we cannot see all the data that it is suppose to pull in. I get an error on page and when I select to view the error this is what I get
Message: 'WddxRecordset' is undefined Line: 184 Char: 2 Code: 0 URI: http://bma.com/user_maintenance.cfm and Message: 'jsusersTLV' is undefined Line: 3208 Char: 6 Code: 0 URI: http://bma.com/user_maintenance.cfm
If I put the IP address in the URL for example http://165.83.109.246/bma/login.cfm all of the data is displayed as it should.
Any thoughts or sugguestios on how to correct this?
Thanks

Yes, the user_maintenance.cfm is one of the forms that the data is not displaying on. There are multiple forms in the application and that just happens to be one of them. the login.cfm is just the login screen. Once you select your name and enter your password to the application then you can select the user maintenance form. If you select someones name the application should pull in all of that persons information. That is the problem, it is not pulling in any information on the user. We get a blank screen where data should be. When we use the IP address in the URL and select someones name in the user manintenance form, it pulls in all the data from that user as it should.

Problem with Design View display

Similar Messages

Maybe you are looking for