Problem with Desktop Integrator

Hi,
I want to use the "Desktop Integrator " In oracle applications R12.
But i get this error message :
Desktop Integration is not a valid responsibility for the current user. Please contact your System Administrator.
Help,
Saad

Is this module installed in your instance?
Can you reproduce the issue with other users?
Please see if the suggested solution in (XML Publisher Administrator is not a Valid Responsibility for the Current User [ID 1192054.1]) or (How to Enable a New Function to be Available for Other Responsibilities [ID 307970.1]) is applicable.
Any other details about the error in Apache log files?
Thanks,
Hussein

Similar Messages

Problems with accounting integration cProjects

Dear Sirs,
I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
The project is unknown in Accounting
Message no.
DPR_FIN_GECCO006
Diagnosis
Etc..
In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released replicated.
No company code could be determined. Message No IAOM_CPROJECTS001.
In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
Best regards,
Jørgen Ruud

Hello Jørgen,
It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
logic: CPR1 -> model order -> company code
Would you please try the note 875275, if it can help.
In case that it does not help, you can eithter use the Badi method to set it hardly, or create a customer message to let SAP check it.
name of Badi DPR_FIN_GECCO_ATTR
code like following:
      ls_attribute-data_element     = space.
      ls_attribute-value            = '1000'.
      ls_attribute-field_name_orext = 'BUKRS'.
      ls_attribute-fldname_receiver = space.
      ls_attribute-struc_name_copa = space.
      ls_attribute-field_name_copa = space.
      ls_attribute-ext_attr_name    = space.
      ls_attribute-ext_attr_value   = space.
      INSERT ls_attribute INTO TABLE ct_attributes.
regards!
Zhenbo

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error with Desktop Integration on Macs

My JWS program runs fine on several Macs (running on 1.4.2-XX and 1.5), however, whenever I try to use the desktop integration, I get an error creating the shortcuts. There are no problems on Windows clients.

I would suggest you use the clean uninstall link and downloading 4.5. It has proved very stable with XP I use it.
I would strongly advise against loading the media manager though, It is less that stable software. I take it you know where to download 4.5?
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=SAL_Pub...
Let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem with desktop aplication

Hello, I have a problem with logging in creative cloud desktop applications.
when I enter an Adobe ID and password, so do not register the application and return me back to re-enter your username and password, and so forth ..

http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

Problem with Xelsius Integration

Hi,
I have installed licenced version of Business Objects Edge Client tools and also integration kit and Xelsius. When I open the xelsius and trying to connect through manage connection - Data manager -Query As A Web service - getting problem with URL ,which URL do I need to use ?? and also I tried using SAP netweaver connection selected query and its throwing #2302 error,searched forums and found few answers for this error but still not able to fix the issue.Please let me know how to connect to xelsius to QAAWS and also to SAP netweaver connection.
Thanks in advance

Hi
#2032 can have multiple root causes. I would suggest you search on service marketplace for the error #2032 - you will find several entries. Take a look at those use cases and the corresponding solutions.
Ingo

Creating LOVs with "Desktop Integration Manager" in EBS 12.1.x

After some struggling getting the "Desktop Integration Manager" to work (due to some obscure hard-coded security checks) I was able to create an Upload Integrator. The next step is now to add some LOVs on the upload spreadsheet.
I managed to create a Gender Popup LOV using a table (e.g. FND_LOOKUP_VALUES). Here is how to do that:
Desktop Integration Manager => Manage Components
Navigate to your attribute (your interface column) and click Update. Enter the following:
Val Type      = Table
Id          = LOOKUP_CODE
Meaning     = MEANING
Desc          = DESCRIPTION
Val. Entity     = FND_LOOKUP_VALUES
Where clause     = lookup_type = 'IGW_SUBJECT_TYPE' and enabled_flag = 'Y' and meaning <> 'Unknown or not reported' and sysdate between start_date_active and nvl(end_date_active, hr_general.end_of_time)
Lov Type      = Pop List
Type your custom Header in the ‘Prompt above’ field if required.
So far so good. However, I am not able to create a simple date picker or a Java validation. Somehow you need to create (or choose) a ‘Component’ with the ‘Manage Components’ function. But exactly how do you set the Component & Attribute up to make this work? For the date picker I chose:
Validation Type = Java
Component Name = Date Picker for From Date
LOV Type = Blank
I get a Popup Date Picker in my sheet now, however when I select a date is does not return it to the spreadsheet.
Can someone provide some screenshots how to create a date picker and/or a Java validation using seeded or custom Components?
I have read the documentation in the Desktop Integration Framework Developer's Guide Release 12.1 (December 2009) but that didn’t get me much further as there are no examples at all.
Thx
Jeroen

Hi, with 'hard coded security check' I meant that some parts of the "Desktop Integration Manager" only work if you have responsibility "Application Developer" attached to your User.
You can change a 'seeded' integrator with:
update BNE_INTEGRATORS_B
set
created_by = <your user id>
,last_updated_by = <your user id>
,display_flag = 'Y'
,source = 'C'
where integrator_code = <your code>
;

Volume problem with Desktop Theatre 5.1 DTT2200

Hi,
I'm experiencing problems with my Desktop Theatre 5.1 DTT2200's volume. It goes up and down with no sense. Doesn't matter if I'm watching a movie, listening to music, playing games or whatever. The speaker system is connected to a SB Live! Sound card but even if I disconnect it and I use the onboard sound plugs it is still happenning the same problem.
Can anyone help me with this?
Thanks in advance!

I Have the same problem, really a shame cause the soundquality is very good, but if i have too keep adjusting the volume it's not really serving it's purpose.
The potmeter of the volumecontrol is malfunctioning. You could try disasssembling it and clean it but that didn't work for me till yet. Best is to replace the potmeter but it is impossible to find a replacement. I'm told it's a very (too) cheap component unsuitable for frequent use so i think Creative shouldn't had used it in the first place. I'm told it's a ct. component fot the far east.
I contacted Creative but they can't supply me with a substitution, either a potmeter or volumecontrol.
The volume control can't be found elsewhere because Creative designed their own connector i think.
Guess i have to annoy the crap out of myself before i buy another set.

Timezone problem with Desktop 6.2 calandar and outlook 2007 after HotSync

After recently being upgraded to Desktop 6.2 I have a problem with Hotsync Palm-calendar and outlook 2007.
When I create a new appointment in outlook 2007 and next do a HotSync it is stored in PalmTungsten-E2 calendar with a timezone CEST (=2 hours earlier than it should be).
At least I won't be late for these appointments, but its a bit annoying.
I already tapped and untapped the box -New events use time zones- in the Calendar Preferences, but that does not help.
Louis
Post relates to: Tungsten E2
This question was solved.
View Solution.

Thanks Colapop for you suggestion.
I had already tried that option and it gave no good result.
Yesterday I bought KeySuite from Chapure and now everything works fine again.
I do regret a bit I upgraded to PalmDesktop 6.2 because that was the start of my problems. The reason for updating to 6,2 was that I wanted to make use of outlook 2007 instead of palmCalender.
Cheers
LouisK100

Problem with Desktop sync with Torch 9810

I recently acquired a Torch 9810 (upgrading from a Curve 8900).
Sometimes, when I try to sync the Torch using my Macintosh (OS 10.6.8) I have the following problems:
1. When backing up calendars the desktop software warns me that if I continue 487 entries will be deleted on my desktop computer. But I have the Blackberry and my Mac iCal program set so as not to delete old files. There seems not to be an option just to update the Blackberry and leave my desktop computer alone. The choice seems simply to sync or not to sync. How can I ask Blackberry Desktop to modify my handheld device ONLY?
2. If I try to cancel a "sync" functions, sometimes the program just hangs, then I have to use "Force Quit."
3. Then when I reconnect the Blackberry the Mac OS tells me the Blackberry memory is corrupted and I should re-format the disk.
I did not have this problem with my Curve 8900. What is happening? How can I prevent this from happening again?
Eric

hello,
there is an article in the public knowledge base :
http://www.blackberry.com/btsc/KB14924
"Error Encountered 0x8004FD2B, Check Documentation"
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Problems with desktop/app sharing/viewing through conference

We have a problem with viewing shared desktop/app with external contacts in a conference. We're able to share/view desktop/app directly with an external users, but not in a conference. We get the error message: "Sharing failed to connect due to network
issues. Try again later."
If we're using the web app on the same computer where we have the problem, we're able to view the content in the conference.
It's working fine internally, it's also working fine when users are outside of our office.
All other functions in Lync are working fine.
We have 1 standard Lync server and 1 Edge, we don't have a reverse proxy but multiple IPs with port forward to corresponding ports on each server.
How does the Lync client connect the shared content?

To Fix your issue, you can follow below steps
A common root cause for this error occurs when required ports are not available. Begin troubleshooting by verifying required ports.
Public --> Edge server:
TCP/443
UDP/3478
TCP/50,000-59,999 (Outbound only)
Determining External A/V Firewall and Port Requirements
Topologies for External User Access
From the Front End pool to the internal Edge:
TCP/5062
TCP/443
UDP/3478
From the internal Edge to the Front End Pool:
TCP/5065
TCP/49152-65335 (Inbound/Outbound)
Ports and Protocols for Internal Servers
From the internal Client to the internal Edge:
TCP - 443
UDP – 3478
Also you can refer below link
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Problems with Lync integration in App-V Package for Office 365 ProPlus

We have problems with setting Lync 2013 to automatic start after Windows start with Office 365 ProPlus App-V Package made by Office Deployment Tool. We use latest version for both (ODT and download package) at Windows 7 Enterprise 64 bit.
We have done this for Lync 2010 and also for Lync 2013 (MSI installations) and it works correctly.
User can choose to start Lync automatically, but this settings is ignored and in virtual registry is set wrong. We look for possible ways to set this by GPO (in ADMX is not this option available) by inserting in virtual registry with Package ID and user
SID in registry path.

Usually setting apps to auto start sets a registry key under HKCU\Software\Microsoft\Windows\CurrentVersion\Run, but since this registry key is inside the virtual environment, Windows does not read it at logon.
The workaround is to either set this key in the native registry (perhaps by an App-V script), or easier still, just copy the shortcut to the Start Menu\Programs\Startup folder. Since you can't really modify Office 2013 packages with the sequencer, you'd
have to add this shortcut by modifying the deployment config file.
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Manage integrators with "Desktop Integration Manager"

Hi,
I am trying to get to the Desktop Integration Manager menu as described in the Desktop Integration Framework Developer's Guide Release 12.1 (on page 17 / 2-1):
To manage integrators:
1. Navigate to the Integrators page from the Oracle E-Business Suite Navigator by
choosing either Desktop Integration Manager: Manage Integrators or a custom
responsibility and menu path specified by your system administrator.
However "Desktop Integration Manager" is not a responsibility I can find in our 12.1.2 environment.
Does anyone has a clue where to find it?
thx
Jeroen

Hi,
Please make sure you have (Patch 9055234 - DIF: NEW RESPONSIBILITY AND FUNCTION FOR DESKTOP INTEGRATION MANAGER) applied.
Please see these docs for details (search for the patch number).
List of Patches in Web Applications Desktop Integrator (Web ADI) for Releases 11i and 12 [ID 726989.1]
Oracle Web Applications Desktop Integrator Release Notes, Release 12.1.2 [ID 950876.1]
Thanks,
Hussein

Problem with Desktop Integrator

Similar Messages

Maybe you are looking for