Problem with desktop resolution in the masthead area

Hi,
One of my clients is having a big monitor and when he tries to access portal some of the screen elements in masthead are appearing twice but in smaller monitors it is coming correctly.
So how do i rectify this problem
Thanks
Bala Duvvuri

Hi Bala,
Make sure all attributes concerning your images in the masterheader, starting with "Repitition..." in the theme editor under System Administration -> Portal Display, are set to no-repeat.
This will solve your problem.
Hope this helps.
Regards,
Alain

Similar Messages

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

It was because the problem was major. If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel. The common way to solve that is to rebuild servers and put back into service. That takes time.
Apple did not want to admit this problem. My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed. To reveal this would be to cast into doubt their future revenue.
Either way. Run do not walk away from Icloud products and services. Apple has demonstrated they can not be a business partner.

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
In i-Movie there is no problem with this film, but the problem begins by exporting to iDVD and making there a project.
Who can help me, then I cann't find everything about this in any forum?

Hi
Can be a problem that get multiplied and visible when iDVD encode for DVD.
A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
C. Does this problem arises what ever encoding quality You use ?
Yours Bengt W

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help Apple support team!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B...)

Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

Check the Adobe website for compatibility.
Ciao.

HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words.

Problem with desktop icons

Hi,
Hope someone can help, my desktop icons have turned into these wierd square buttons with a grey background - The icons are no longer draggable but simply work as buttons.
Basically everything that I dump on the desktop turns into one these grey square buttons.
I've never seen this before - maybe it's a simple solution to solve.
It quite suddenly began doing this when I still had OS 9.0 - can't remember the circumstances since it was quite a while ago...I thought the problem might have gone away when I updated to 9.2.2, but it's still there.
Any suggestions would be welcome.
cheers
Andrew

OS9er...
Have you attempted to change your buttons back to icons?

Chart - problem with realize one of the function under CR XI

Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
       year ,
      month
Second query
"SELECT
       year + FLOOR({month + offset} % 13),
      {month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.

I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you.

Need to add a link to the masthead area of the Portal

Hi
I need to add a link to the masthead area of the portal. That link needs to be able to print the content of the current page.
Ihave downloaded the com.sap.portal.navigation.masthead into the NWDS.
Can anybody please let me know where exactly to modify the code.
i am guessing i may need to use window.print() to print the page.
Thanks
Sharath
Thanks
Sharath

Step 1: Adding new link in the masthead
1. Rename the par file to your own namespace and import the PAR using eclipse
2. To add your link - modify HeaderiView.jsp appropriately
3. Build the PAR and export using Eclipse
Step 2: Create an iView
1. Content Administrator -> Portal Content -> Select the folder in which you need to create the masthead iView. Right click on the selected folder and "Select New From PAR" -> iView
2. Select the PAR file name created by you in Step 1 a
3. Choose "default" in Portal Component Selection
4. Provide the properties for the iView and save
Step 3: Modify Portal Masthead
1. Add the iView created in Step 2 to the Framework Page of your application
2. Remove the existing Masthead iView from the framework page and add iView created in Step 2 in the framework page.
3. Note that the position should be the same where the previous masthead is removed.
Logoff and logon with the user who is assigned the framework page - you should be able to see the new masthead with links
Incase you are changing the default framework page and default masthead ensure that you have a backup so that you can revert.

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

A problem with PoE devices in the Topology view (LMS 3.1)

Hello,
the customer has a problem with PoE devices in the Topology View. :-( He doesn't see the 2960 PoE devices with the PoE filter enabled in the topology view:-( He uses LMS 3.1 on Windows.
In the NetPro discussion I found that the list of PoE devices is in the following file:
POECapableDeviceTypes.properties
but I cann't to find thid file in the campus directory. In the campus folder are following folders: bin, etc, lib and www.
Thank you
Roman

The file is in NMSROOT/campus/www/classpath/com/cisco/nm/ani/clients/campus/main/filters/POECapableDeviceTypes.properties.

Problem with desktop resolution in the masthead area

Similar Messages

Maybe you are looking for