Problem with Digital Out

I have installed drivers on my Sound Blaster Creative Audigy2 Value.
I have digital output pins on my soundblaster , but the tick to ENABLE Digital Output is missing ..
How to enable my digital Output ??

Similar Messages

Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Problems with filling out PDF forms

We have problems with filling out PDF-forms. Aotomatic filling of forms is deactivated and we use the Adobe Reader 11.0.05. The problem is: After some time the inputs are wrong put down in the form. For example: I write 120 and in the form stands 125. We have already extinguished the cache. Thanks for your help in advance.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Problem with Digital Signature strategy in Document Managment System

Hello ALL,
I am facing problem with Digital Signature strategy in DMS. If any help its greatly appreciated.
I have senario where Approvers in DMS will review the document and approve the document and put on their digitial signature. if i have multiple approvers maintained in the characterstics it has to check weather it has been approved by all approvers otherwise it has to reset the status to for approval.
My problem is i am able to reset the status back from approved to for approval using the badi document_status01 but when the next approver logs in to the document and change the status to approved he is not able to get the digital signature pop up which it comes only first user approves it.
can any one help me out on whats going wrong in it.
Thanks
Srikanth Aduri.

Hi,
maybe the reason for this is that the status of the digital signature is not changed. Then the system thinks that the digital signature is still completed and therefore the user is not getting the pop-up again. The database table for the digital signature for documents is TC77. I hope this information is usefull for you.
Best regards,
Christoph

PROBLEM WITH DIGITAL EDITIONS

Hi,
I've always encountered this problem with digital editions: Adobe Digital Editions 2.0 has encountered a problem and needs to close. We are sorry for the inconvenience.
I'm using Windows XP pro 2002, service pack2 on an old computer AMD Duron 901 Mhz , 384 mb RAM.
is there a solution ?
Thanks

Hi
I had the same problem, ADE 2 won't work with older AMD computers. See http://forums.adobe.com/thread/1081859
Older version that does work at: http://kb2.adobe.com/cps/403/kb403051/attachments/setup.exe
good luck

Problems with TV Out signal after upgrading to iOS 5.1

Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

Problem with fading out particles in cs5

I have a problem with fading out particles or anything for that matter in my CS5 after effects! I set up the key frames right. O opacity at first and whatever number at next and it fades in fine, But when I try to do the reverse it will not fade out and only stops the effect if I cut its durration at the red par representing it on the top of the time line. This produces and rough aburpt cut of the effect which will not due. Please can anyone tell me what I am doing wrong that I can't fade out particles with opacity?

First question: What OS and what's the build of CS5.5?
Second question: What effect are you using? There are a bunch of ways to generate particles.
Last question: if you turn off the effect can you get the layer to fade out? Pressing Alt/Option + t will set a keyframe for opacity on your layer and reveal the keyframe in the time line. Do that, set the value to 0, then move down the timeline a few frames and set the value to 100. This should generate another keyframe. Now move down a few more frames and press Alt/Option + t or change the value for opacity to anything and then back to 100, or copy the previous keyframe and paste to set a 3rd keyframe. Finally move down a few more frames and set the value to 0. You should have 4 keyframes in your tlimeline for opacity. If you want to clean up the layer press Alt/Option + ] to set the out point for the layer.
Everything should work just fine. Turn on the effect and your layer and the effect should fade out.
If you want to do something else with the particles, like fade out a particle over the lifetime of the particle we'll need to know which plug-in you're using.

Has anybody had a problem with greyed out wifi on i phone 4 gs

Has anybody had a problem with greyed out wifi setting on iphone 4gs

Forty four in the last week.
wifi greyed out

Problem with Digital Cinema Desktop Preview on Macbook Pro

I hava a Macbook Pro 2.2 GHz with 2 GB RAM. I would like to use a connected 24"-Display for preview of my HD-Material (ProRes and HDV). Unfortunately I am not getting my Macbook Pro to playback all frames. Whend Digital Cinema Desktop Preview is activated, there are only still frames displayed. No smooth playing back neither in the canvas window nor the 24" display. I have External Video -> All Frames checked.
Does the Macbook Pro 2.2 not meet the specs for this feature?
Or is it a problem with Leopard? Is anyone with Tiger able using Digital Cinema Desktop Preview with succes?
Regards,
Joerg

So are you saying that the DVI output on my MacBook Pro IS true HD resolution and not a proxy like the canvas?
What I am saying is that the video feed coming out of the DVI port is YUV. Computer monitors take that YUV information and convert it to RGB for displaying purposes. So if you connect an Apple monitor to the DVI port, and then use that for Digital Cinema Preview, you are seeing a converted proxie image. The MXO takes the actual YUV footage and outputs that to the Apple display as YUV, and therefore presents full quality broadcast colors. And it does it pixel for pixel...the 23" display is 1920x1200, so there are thin black lines on the top and bottom.
AND the MXO software has a proc amp for adjusting color bars, and a BLUE ONLY option for proper monitor calibration. THis really is an amazing little box.
I'm using a Dell ultrasharp 20" that looks very good that way; I just didn't think it was HD.
It is, but it is a converted RGB image...and since it is 20", it isn't pixel for pixel (well, it would be for 720p, not 1080), and if it isn't pixel for pixel, then it is a converted image. Not suitable for color correction.
then using a DVI to HDMI cable I should be seeing HD from my Sony bravia also?
Yup...sure can. It will look pretty good too. But it being a consumer set, and again having a YUV>RGB converted image, it won't look as good as it could. The MXO would feed it a proper YUV signal, as would an Decklink HDP (but you need a decklink card with SDI out for that).
Shane

Having problem with optical out on HD rental movie

Hi all, I just bought an Apple TV for myself for the holidays. I have the optical out going to a DAC then to my stereo, and it works fine for music, Netflix, and iTunes Radio. However, when I rented a movie via iTunes (The Wolverine), optical out no longer worked. I did get sound through HDMI (and thus through my TV--not great, but usable).
Because this is a pure DAC (no Dolby), I had to turn Dolby Digital to Off to get Netflix to work. I tried Audio Output as both Auto and 16 bit, and neither setting worked. Audio Output = Auto works fine for everything else.
Anybody else have a similar issue? Thanks!

Turning Dolby Digital off shouldn't mean not getting any signal out of optical out. I turned it off when I had problems with Netflix movies, but now Netflix movies are fine. I'm getting sound out of optical out with them, which means that something is converting the sound signal to PCM.
The problem is that the conversion doesn't appear to be happening for iTunes movie rentals for some reason.

10.4.9 - Major audio problems with digital audio

I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
Anyone else have any problems with their digital audio input/outputs?

I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

Problem with digital samples of NI 9425 in windows 7 on usb 3.0 ports

I have a program in C that reads the digital samples of a device 9174 module 9425 in windows 7 x64 which has no problems with the USB 2.0 ports but with the 3.0.
When I connect the device to a USB 3.0 port errors in the samples appear, are activated or deactivated lines uncontrollably.
The PC is Artigo A1250, Drivers NI-DAQmx9.6

Hey vic22,
Sylvia is correct -- the 9174 has been thoroughly tested on the USB 2.0 standard. But we still expect it to communicate properly with USB 3.0 ports. We have seen a few cases in which specific host controllers cause unexpected behavior similar to what you describe, but in general, our USB devices are compatible with USB 3.0.
Of course, if sticking with a 2.0 port works for your application, that will be the quickest/simplest recommendation that we can make. If you need to move your cDAQ to a 3.0 port, let us know -- there are some troubleshooting steps we can take to figure out why you're seeing errors.
There are some additional details in this somewhat related article. Upgrading the drivers for your USB Host Controller might be worth a shot.
Kyle B | Product Support Engineer | ni.com/support

Audigy 2 problems with spdif out not working and cracking appear

Hello everyone,
I am new in this forum but after searching through it i decided to post as i din't find a problem exactly similar to mine.
I have a Creative audigy 2 ZS plugged on my computer with this configuration : Gygabyte P35 DS3, Quad core Q6600, Kingston 2 gb.
From the beginning of my purchase i did not have any problem of cracking or connection problems in spdif with digital din in either XP or Vista. Last week end i decided to re install XP after a virus infection with XP SWEET wich install directly the drivers of my peripherals like the audigy.
The audigy is connected to my speakers : Creative? 5. kit 5700 via the digital din connection and without any analog connection as i selected digital out only in my settings.
Everything was working fine until 2 days ago when? while watching a divx the sound stopped working. i checked everything in m connection and everything was good as well as my speakers. finally i connected the audigy via analog cables to the speakers to find that, if i select digital out only no sound could be heard and finally that poping and cracking sounds started to appear.
I don't know what happened with my system as it never did that before in any of my configurations.
When i reboot my computer, the digital out start working again to finally stop 5 minutes later.
If somebody can help me is help would be most welcome.
Thank you!

Well, I do not know much about the red light thingy, but if the S-Bracket works well, it should be not problem, unless you can't get anything from the S-Bracket.

Problem with Digital Editions page view

I used Digital Editions on two books just recently and was able to fit each page of the ebook to it's full height from top to bottom.
I just downloaded my third book to DE, and I can't seem to find the button to fit each page to their full heights (top/bottom). Instead, it's stuck on dual-page view. The single-page view button option isn't even there on the third book, but IS there on the first two books. I downloaded a fourth book and it's experiencing the same problem; stuck in dual-page view with no single-page option.
If I try to re-size the DE window to force it into a single page view, the page numbers are all messed up appearing at random spots of each page rather than at the top right where they are suppose to be.
I re-installed DE but the problem still persists. Is this a problem with the books in specific? Or something else?
Thanks

http://visguy.com/vgforum/index.php?topic=5849.15
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

Problem with IN OUT Number, OUT RefCursor for EF Model StoredProcedure call

When I call a stored procedure using the EF Model and implicit binding via App.config which has three parameters i.e. 'IN Number', 'IN OUT Number' and 'OUT sys_refcursor', the 'IN OUT Number' is not set correctly on return from the procedure.
The 'IN OUT Number' is for an error code and is set to 12345 on input and is then set to 54321 by stored proceedure for return.
The correct value is returned when the call is via OracleCommand using implicit binding via App.config but remains unchanged when the call is via EF Model and implicit binding via App.config.
The ODP documentaion says you cannot have two OUT RefCursors when using EF Model but does not say you cannot have OUT RefCursor and other non-RefCursor OUT parameters.
The idea behind this type of procedure is to have multiple input parameters to configure and filter the stored procedure and an output result set that consists of an error code and a collection of result rows in a RefCursor.
I am using 11g R2 database and ODP 11g Release 2 (11.2.0.2.30) and ODAC Entity Framework beta.
The query uses Scott/tiger schema with parameters department code, error code and list of employees for department.
code:
PROCEDURE TEST_PARAMETERS
DEPT IN NUMBER,
ERROR_CODE IN OUT NUMBER,
DEPT_EMPLOYEES OUT sys_refcursor
AS
BEGIN
DBMS_OUTPUT.PUT_LINE('DEPT = [' || DEPT || ']');
DBMS_OUTPUT.PUT_LINE('ERROR_CODE = [' || ERROR_CODE || ']');
OPEN DEPT_EMPLOYEES for SELECT empno, ename from emp where deptno = DEPT;
-- set ERROR_CODE for return
ERROR_CODE := 54321;
END TEST_PARAMETERS;
The App.config for implicit RefCursor binding is as follows ...
<oracle.dataaccess.client>
<settings>
<add name="SCOTT.TEST_PARAMETERS.RefCursor.DEPT_EMPLOYEES"
value="implicitRefCursor bindinfo='mode=Output'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.0"
value="implicitRefCursor metadata='ColumnName=EMPNO;
          BaseColumnName=EMPNO;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=number;ProviderType=Int32;
          PROVIDER_DB_TYPE=Int32;DataType=System.Int32;
          ColumnSize=4;NumericPrecision=10;
               NumericScale=3;AllowDBNull=false;IsKey=true'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.1"
value="implicitRefCursor metadata='ColumnName=ENAME;
          BaseColumnName=ENAME;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=varchar2;ProviderType=Varchar2;
          PROVIDER_DB_TYPE=String;DataType=System.String;
          ColumnSize=10;AllowDBNull=true'" />
</settings>
</oracle.dataaccess.client>
When the call is via OracleCommand both outputs are correct i.e. ERROR_CODE gets set to 54321 and the correct emplyees for department 10 are returned
code:
private void TestParametersViaOracleCommand()
try
string constr = "DATA SOURCE=ORCL;PASSWORD=tiger;PERSIST SECURITY INFO=True;USER ID=SCOTT";
OracleConnection con = new OracleConnection(constr);
con.Open();
OracleCommand cmd = con.CreateCommand();
OracleDataAdapter adapter = new OracleDataAdapter(cmd);
DataSet ds = new DataSet();
cmd = con.CreateCommand();
cmd.CommandText = "SCOTT.TEST_PARAMETERS";
cmd.CommandType = CommandType.StoredProcedure;
cmd.BindByName = true;
OracleParameter dept = cmd.Parameters.Add("DEPT",
OracleDbType.Int32,
ParameterDirection.Input);
dept.Value = 10;
OracleParameter errorCode = cmd.Parameters.Add("ERROR_CODE",
OracleDbType.Int32,
ParameterDirection.InputOutput);
errorCode.Value = 12345;
// RefCursor output parameter implicitly bound via App.Config
adapter = new OracleDataAdapter(cmd);
adapter.Fill(ds);
// should be 54321 and is ...
Console.WriteLine("after call errorCode.Value = " + errorCode.Value);
Console.WriteLine("list size = {0}", ds.Tables[0].Rows.Count);
// only one table
DataTable deptEmployeesTable = ds.Tables[0];
for (int ii = 0; ii < deptEmployeesTable.Rows.Count; ++ii)
DataRow row = deptEmployeesTable.Rows[ii];
Console.WriteLine("EMPNO: " + row[0] + "; ENAME: " + row[1]);
catch (Exception ex)
// Output the message
Console.WriteLine(ex.Message);
if (ex.InnerException != null)
// If any details are available regarding
// errors in the app.config, print them out
Console.WriteLine(ex.InnerException.Message);
if (ex.InnerException.InnerException != null)
Console.WriteLine(
ex.InnerException.InnerException.Message);
output:
before call errorCode.Value = 12345
after call errorCode.Value = 54321 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
However when call is via EF Model the correct employees are returned but the ERROR_CODE parameter is unchanged on return.
code:
private void TestParametersViaEFModel()
var context = new ScottEntities();
Decimal dept = 10;
ObjectParameter errorCodeParameter = new ObjectParameter("ERROR_CODE", typeof(decimal));
errorCodeParameter.Value = 12345;
Console.WriteLine("before call errorCodeParameter.Value = " + errorCodeParameter.Value);
// RefCursor output parameter implicitly bound via App.Config
var queryResult = context.TestParameters(dept, errorCodeParameter);
// should be 54321 and is ...
Console.WriteLine("after call errorCodeParameter.Value = " + errorCodeParameter.Value + " (should be 54321!)");
List<TestParameters_Result> deptEmployeesList = queryResult.ToList();
Console.WriteLine("list size = {0}", deptEmployeesList.Count);
for (int ii = 0; ii < deptEmployeesList.Count; ++ii)
TestParameters_Result result = deptEmployeesList[ii];
Console.WriteLine("EMPNO: " + result.EMPNO + "; ENAME: " + result.ENAME);
output:
after call errorCodeParameter.Value = 12345 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
errorCodeParameter.Value IS NOT CORRECTLY RETURNED!
If there is no RefCursor then both outputs are identical i.e. the parameters are being passed in correctly and the problem is not with the 'IN OUT' parameter. Also same thing is true if ERROR_CODE is made an OUT parameter. Also tried changing the position of the parameter in the list but still get same problem i.e. works when OracleCommand but not when EF Model. Also note that the RefCursor results are correct for both types of call i.e. it is just a problem with the value of the 'IN OUT ERROR_CODE' parameter.
I have also enabled debug stepping from Visual Studio 2010 into Oracle PL/SQL as described in
"http://st-curriculum.oracle.com/obe/db/hol08/dotnet/debugging/debugging_otn.htm"
and have verified by inspection that the correct values are being passed into the stored procedure and that the stored procedure is definitely setting the ERROR_CODE to 54321 prior to return.
Most of our stored procedures have these type of parameters i.e. several IN params to configure the work of the stored procedure, an OUT NUMBER parameter for the Error_Code if any and a RefCursor for the result list.
Is this a bug or a feature? Am I doing something wrong?

Just to clarify ....
If the ERROR_CODE parameter is made an 'OUT' parameter instead of an 'IN OUT' parameter the correct return value is given for the OracleCommand invocation but the WRONG value is still returned for the EF Model invocation i.e. just changing the parameter from 'IN OUT' to just 'OUT' does not fix the problem.

Problem with Digital Out

Similar Messages

Maybe you are looking for