Problem with Direct printing of PDF with Barcodes in R12

Hi All,
We are facing a problem in direct printing in EBS R12 with xml pdf reports which contains some barcode fonts. We are using fonts from IDAutomation for barcodes. Printing from request output is working fine. But when it is printed directly everything get printed other than the barcodes. Did anybody face this problem before and fixed it?
Regards,
Benny

Benny,
Output from XML Publisher comes out correctly. The barcodes are stripped off during pdftops conversion. Any idea?
How did you verify the above?
PASTA 3.0 Release Information (Doc ID 239196.1)
BIP PDF Output Does Not Print MICRD Barcode Font - View Output Ok (Doc ID 747195.1)
Thanks,
Hussein

Similar Messages

Can't print to pdf with Acrobat 7.1.0 in Vista

I am unable to print to pdf with Acrobat 7.1.0 in Windows Vista. I used to be able to, now all of a sudden that functionality is gone. I haven't knowingly done any upgrades since the last time I successfully printed to pdf, but I do have autoupdates enabled, so I can't say what Microsoft may have been up to recently. When printing to pdf from Internet Explorer 7, the window simply closes. A printer icon shows up in the system tray but registers 0 print jobs and soon disappears. When printing to pdf from Word (2003), Word crashes with a series of message boxes saying something about attempting recovery. Any suggestions?

AcroTray is running. Thanks for asking that question, as this is one thing that I have disabled on computers running XP, since disabling it in XP doesn't adversely affect my limited use of Acrobat in any way. I have not disabled it with Vista. I tried printing to file, and that also caused the window to close. I happened to have a second IE7 window open when attempting to print to file, and it did not close, so it only affects the active window. I don't know if that helps at all; when a program crashes, I typically observe it take with it all open windows associated with that program, so the fact that this is only closing the active window seems potentially useful to me in my ignorance of what is the root cause.

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

After clean install cannot print to pdf with Acrobat 8 Pro

I recently had to do a clean install on my desktop computer. Is there some way I can print to pdf with my Adobe Acrobat 8 Pro, which was working fine prior to the clean install. I am aware Adobe no longer supports this version, but isn’t this program able to function without being updated? Want to print pdf files from websites and Microsoft office. Am running Windows 7 Ultimate OS.

Hi jadbe,
Windows 7 is not a tested platform for Acrobat 8.

Printing a PDF with Separations

MAC OS 10.6.8
I have a simple illustrator file I'm trying to print to PDF with separations. The file is black with a spot color. When I select the Acrobat 7.0 for the printer it keeps looking for an actual printer. What am I missing here?

Works for me in CS4. Did you set mode to Seperations (Host based)

Problems with print to pdf with Acrobat Pro 9 and FireFox 8

***The page I am using for my base is: http://blogs.adobe.com/digitalpublishing/2010/12/google-ebooks.html
***I have Adobe Acrobat 9 Pro and FireFox 8 installed.
The problem with FireFox is when I select a part of a web page and try to print that selected text the first line gets chopped, if the text is small the first line might even be missing completely. Perhaps it is a margin issue but not sure how to modify this.
I know I am not being very clear but if anybody has any ideas or would like further info please let me know.
Thank you.

I suspect if you do the same process with a print to paper, you will get the same result. I got the same result with SeaMonkey, but IE8 printed the full font to a PDF. That would suggest it is not Acrobat, but the browser. As I said, suggests, so be careful about drawing your conclusions.

Problem with quick printing multiple .pdfs from Outlook 2010

Hi there,
I have a user who is having problems printing multiple .pdf's using the quick print function in Outlook. I have tried reader 9,10 and 11.
11 errors when printing (nothing specific in the error message) and only 1 or 2 documents are printed.
9 and 10 error and report that a file is missing. Yet again, often prints 1 or two of the files.
I have reproduced the problem on my own PC.
Is there some type of bug with Adobe Acrobat printing multiple files using the quick print function within Outlook?
Any help would be very much appreciated.
Kind regards,
Will

I am not very skilled in Adobe by any means, but I was having the same issue. When I did the Control P to print, I went into Print Options, then into Properties. Under Adobe PDF settings, I unchecked the box that said "Rely on system fonts only; do not use document fonts." and that worked for me.
Hope it helps.

How can I/Is it possible to silently print a PDF with specific print settings and obtaining the resulting job id (in windows at least)?

Greetings,
I have a specific application for Windows I'm developing where I need to silently print a PDF to a real printer. The trick is I need to set specific printing preferences ... such as color/monochrome, # of copies, page size / source tray, etc. The printer is always set to spool documents, and it is key that I know the job id (even if its already done printing) of the resulting print job.
With windows APIs mixed in, I would imagine something like ...
OpenPrinter(printername)
StartDocPrinter(...)
-----> some SDK call to print the document based on the handles I pass it...or perhaps one page at a time after I call StartPagePrinter()
EndDocPrinter(...)
ClosePrinter()
I've been searching for something for days that would give me this sort of control, but I've been finding the documentation very difficult to find on silently printing a PDF through any means other than a command line which doesn't appear to give me the information or control I need.
Is this possible with the Adobe SDK?
I've seen other posts accomplish this by changing the printing defaults for the printer, and then sending the job silently with a commandline. This has two problems for me: 1) I still don't know the Job ID of the print job, and 2) I can't rely on the idea that other unrelated print jobs will not be sent while I'm processing the PDF ... making it difficult to use defaults as a means of controlling the settings without causing a lot of side effects.
Even just a point in the right direction would be a huge help for how I could accomplish this.
Thanks a lot,
Wayne

You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??

I have the same problem, I usually publish to PDF with my Corel Draw x4 and recenlty no file opens all gets the same error, I am so preocupaid because all my work is based in publish to PDF files, I already reinstall all, also Corel, and is doing the same

I have a problem converting Corel Raw file in addobe pdf 11 someone can hlp me i am lousing all my work
thank you luca

Good to know -
Adobe Reader cannot create PDF files.
As well, Corel uses "in-house" routines to publish PDF from applications; so, no use or reliance by Corel on anything of Adobe's.
Yes, if you have Acrobat XI Standard or Pro installed you can to the traditional "file - print" and in the print dialog you can select the Adobe PDF virtual printer to print to PDF.
(But not with Adobe Reader as Reader does not provide, in and of itself, any means of creating PDF -- Reader is your PDF viewer.)
From what you have written it appears that you've an issue with your Corel product's featues; so, best is to visit Corel's customer support for the product.
Be well...

Blue screen while printing to PDF with Adobe

Hi,
I'm using Adobe Acrobat to produce PDF files. A few days ago, all of the sudden, each time I try to create a PDF with the virtual printer, I get a "Blue Screen Of Death" reporting some problem on the win32k.sys file.
I'm using Windows Vista Professional 32 bits and Adobe Acrobat 9.
Best regards.

Which version of AA9. There have been 7 updates or so. You might try a repair and then do any uninstalled updates (in order, they are not cummulative). The repair may resolve the issue or you may have run into some other bug that the updates might fix.

How to "Print to PDF" with property "Signing: Allowed"

Print to PDF generates a file with the security document property "Signing: Not Allowed". These Properties are only visible in Acrobar reader -> File -> Properties; you can't see these in Preview.
Is there a way to change Mac OS X Print to PDF, that it generats PDFs with "Signing Allowed"?

Thomac:
After further review I discovered that it isn't the PDFs you are creating that has the problem, it is the limitations of Adobe Acrobat Reader to perform the ability to do the functions of Document Assembly, Commenting, Signing and Create Templates. If you had Acrobat Professional and opened your PDFs and checked the properties, you would discover that all these would be allowed.
Initially, I was looking at my test files with Acrobat Professional. But, when I opened the same PDF with Reader on a different machine, I was getting the same summary as well.
Adobe Reader is just that: a READER.
You can feel safe that your PDFs allow signing.

Why I cannot print a PDF with markups?

We use Acrobat Standard 7.0.8 and cannot print a PDF document form with markups. We found a "quick fix" to print it, which was to select in the print dialogue to print Document and Markups.
Question:
Because we've sent the form to our clients, they several have reported this about the form. Do you know why this would happen? Is it that they are using a different version of Adobe? Or what is the problem?
Joe

That's the way the application works. If you think the default should be to print the markups send a feature request to Adobe, but I doubt it will happen. You just need to explain to your clients how to do it. It's quite simple.

How to print a PDF with equal white borders

Hello,
When I print my flyer the white borders on the top and bottom are unequal. How do I make it so all 4 sides have the same width for the white border? The print preview is unequal too.
Thanks

Thank you Michael
My problem is, I need to print the document with the mm items. I work
in a print & copy shop, we must deal with whatever the customers send
us.
I actually stumbled around and found I could do it with the MultiMedia
Flash Tool, editing the poster options. It's a tedious process though,
and I'd like to find a way to set this for the whole PDF file at once.
If you know how to do this I'd appreciate the info.
Thanks again,
Mark

How to print a PDF with multimedia content?

I have a 127 page PDF with flash files and other multimedia embedded. How do go about printing this to a laser printer?

Thank you Michael
My problem is, I need to print the document with the mm items. I work
in a print & copy shop, we must deal with whatever the customers send
us.
I actually stumbled around and found I could do it with the MultiMedia
Flash Tool, editing the poster options. It's a tedious process though,
and I'd like to find a way to set this for the whole PDF file at once.
If you know how to do this I'd appreciate the info.
Thanks again,
Mark

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Problem with Direct printing of PDF with Barcodes in R12

Similar Messages

Maybe you are looking for