Problem with disabled code view

Hi,
I've a problem with a template-based website which works fine
in design view but will not allow edits in code view (with the
exception of the contents of the <title> element). The
template has multiple editable regions and has been deployed on
quite a few occasions to multiple authors with varying
configurations without any trouble before, but now it is causing
quite a bit of head-scratching!
The problem originally manifested in Dreamweaver MX 2004 on
Windows 2000. An upgrade to Dreamweaver 8 has taken place and the
issue persists. Testing on a similar computer using a standard
shared drive in Windows shows the same problem in Dreamweaver 8 but
was fine in Dreamweaver MX. Working with a copied set of files on a
remote computer (Win2k and DW MX 2004) seems to somehow resolve /
circumvent the problem and the code view works fine. Unfortunately
this isn't an option for the main authors of the site who have only
their current machines available.
The fifth post down in a
thread
over at DMXzone seems to refer to a similar problem, but the
workaround highlighted there has not worked for me.
I'm not really a heavy Dreamweaver user but I can normally
figure things out. This one however has got me stumped - anybody
got any ideas? (Apologies if it's a really simple setting or flag
that I should know about, but I've not been able to find anything!)
Cheers,
Dan

Ca you post a link to the page, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yorkdan" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> I've a problem with a template-based website which works
fine in design
> view
> but will not allow edits in code view (with the
exception of the contents
> of
> the <title> element). The template has multiple
editable regions and has
> been
> deployed on quite a few occasions to multiple authors
with varying
> configurations without any trouble before, but now it is
causing quite a
> bit of
> head-scratching!
>
> The problem originally manifested in Dreamweaver MX 2004
on Windows 2000.
> An
> upgrade to Dreamweaver 8 has taken place and the issue
persists. Testing
> on a
> similar computer using a standard shared drive in
Windows shows the same
> problem in Dreamweaver 8 but was fine in Dreamweaver MX.
Working with a
> copied
> set of files on a remote computer (Win2k and DW MX 2004)
seems to somehow
> resolve / circumvent the problem and the code view works
fine.
> Unfortunately
> this isn't an option for the main authors of the site
who have only their
> current machines available.
>
> The fifth post down in a
>
http://www.dmxzone.com/forum/topic.asp?topic_id=33748
> seems to refer to a similar problem, but the workaround
highlighted there
> has
> not worked for me.
>
> I'm not really a heavy Dreamweaver user but I can
normally figure things
> out.
> This one however has got me stumped - anybody got any
ideas? (Apologies if
> it's
> a really simple setting or flag that I should know
about, but I've not
> been
> able to find anything!)
>
> Cheers,
> Dan
>
>
>

Similar Messages

Problems with Standard Apps views (eBusiness Suite)

Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.

Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version:    begin
    dbms_application_info.set_client_info(g_user);
    dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
    dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
    exception when others then null;
    end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott

Problem with Local DCs View in NWDS 7.0

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Hi,
This is due to some files missed in Local development.
Let me know Are you able to see <b>.confdef, .syncdb</b> and <b>buildvariant.config </b> files under Local Developement.
If you are not able to see, UnInstall your NWDS, Remove Local developement under .dtc folder, then Re-Install NWDS.
Hope this will help you.
Thanks & Regards
Vasundhara

Problem with Local DCs View in NWDS

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Your setup might be incomplete: The SAR file extraction creates very long paths on your filesystem. If you do not extract to the rootfolder of disk, chances are the paths become too long and the installation exits, without any warning.
If this is not the cause of your problem, check if the .dcdef files for the local DCs (plugin com.sap.tc.ap if I'm correct) were copied during installation.

Problem with php code. Please help!

Hello!
I'm using the following syntax to bring content into my
websites' layout template:
Code:
<?php //check in the root folder first
if(file_exists('./' . $pagename . '.php'))
include './' . $pagename . '.php';
//if it wasn't found in the root folder then check in the
news folder
elseif(file_exisits('./news/' . $filename . '.php'))
include './news/' . $pagename . '.php';
// if it couldn't be found display message
else
echo $pagename . '.php could not be found in either the root
folder or the news folder!';
} ?>
What it's essentially saying is, if you can't find the .php
file in the _root folder, look for it in the /news/ folder.
It works perfectly if loading something from the _root folder
but I get an error if I need to bring something from the /news/
folder.
Can anyone see any potential problems with my code?
Thank you very much and I hope to hear from you.
Take care,
Mark

I've never seen the code written like that before, but I'm
assuming it's
legal?
Perhaps try:
<?php
$newsroot = $_SERVER['DOCUMENT_ROOT']."/news";
if (!file_exists("$pagename.php")) {
elseif (!file_exists("$newsroot/$pagename.php")) {
else
Or the other thing you can try is replacing the elseif
statement with:
elseif (!file_exists("news/$pagename.php"))
If not - I'm sure Gary will be on here soon...
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Spindrift" <[email protected]> wrote in
message
news:e5mled$272$[email protected]..
> Hello!
>
> I'm using the following syntax to bring content into my
websites' layout
> template:
>
> Code:
>
> <?php //check in the root folder first
> if(file_exists('./' . $pagename . '.php'))
> {
> include './' . $pagename . '.php';
> }
> //if it wasn't found in the root folder then check in
the news folder
> elseif(file_exisits('./news/' . $filename . '.php'))
> {
> include './news/' . $pagename . '.php';
> }
> // if it couldn't be found display message
> else
> {
> echo $pagename . '.php could not be found in either the
root folder or
> the
> news folder!';
> } ?>
>
> What it's essentially saying is, if you can't find the
.php file in the
> _root
> folder, look for it in the /news/ folder.
>
> It works perfectly if loading something from the _root
folder but I get an
> error if I need to bring something from the /news/
folder.
>
> Can anyone see any potential problems with my code?
>
> Thank you very much and I hope to hear from you.
>
> Take care,
>
> Mark
>

Problem with pdf chrome viewer and javascript

I have a problem with chrome pdf viewer. We have created a form with acrobat 9 pro, this form contains a javascript. When the form is printed or saved the javascript checks that all the mandatiry fields are completed and displays a message if some fields are uncompleted. The chrome pdf viewer doesn't display the warning message when the form is saved, and doesn't display the check box included in the warning message pop up to confirm that the user accepts to print the form. The control is correct with FF et IE
Thanks for your help

There are many PDF viewers. Adobe's, third party downloads, things that come with systems (Apple Preview, Microsoft 8 Reader), things built into browsers (Chrome, Firefox...) Adobe's software understands the full set of JavaScript. Some ignoresJavaScript altogether. Some do selected JavaScript. This is a bit of a mess, but nothing can be done about it EXCEPT that you can demand your users use Adobe Reader. Whether they actually will depends on how important your needs are to them.

Please tell me what is the problem with this code

Hai,
Iam new to Swings. can any one tell what is the problem with this code. I cant see those controls on the frame. please give me the suggestions.
I got the frame ,but the controls are not.
this is the code:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ex2 extends JFrame
JButton b1;
JLabel l1,l2;
JPanel p1,p2;
JTextField tf1;
JPasswordField tf2;
public ex2()
setDefaultCloseOperation(EXIT_ON_CLOSE);
setTitle("Another example");
setSize(500,500);
setVisible(true);
b1=new JButton(" ok ");
p1=new JPanel();
p1.setLayout(new GridLayout(2,2));
p2=new JPanel();
p2.setLayout(new BorderLayout());
l1=new JLabel("Name :");
l2=new JLabel("Password:");
tf1=new JTextField(15);
tf2=new JPasswordField(15);
Container con=getContentPane();
con.add(p1);
con.add(p2);
public static void createAndShowGUI()
ex2.setDefaultLookAndFeelDecorated(true);
public static void main(String ar[])
createAndShowGUI();
new ex2();
}

import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ex2 extends JFrame
    JButton b1;
    JLabel l1,l2;
    JPanel p1,p2;
    JTextField tf1;
    JPasswordField tf2;
    public ex2()
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        setTitle("Another example");
        b1=new JButton(" ok ");
        p1=new JPanel();
        p1.add(b1);
        p2=new JPanel();
        p2.setLayout(new GridLayout(2,2));
        l1=new JLabel("Name :");
        l2=new JLabel("Password:");
        tf1=new JTextField(15);
        tf2=new JPasswordField(15);
        p2.add(l1);
        p2.add(tf1);
        p2.add(l2);
        p2.add(tf2);
        Container con=getContentPane();
        con.add(p1, BorderLayout.NORTH);
        con.add(p2, BorderLayout.CENTER);
        pack();
        setVisible(true);
    public static void createAndShowGUI()
        ex2.setDefaultLookAndFeelDecorated(true);
    public static void main(String ar[])
        createAndShowGUI();
        new ex2();
}

Vector, what is the problem with this code?

Vector, what is the problem with this code?
63 private java.util.Vector data=new Vector();
64 Vector aaaaa=new Vector();
65   data.addElement(aaaaa);
74 aaaaa.addElement(new String("Mary"));on compiling this code, the error is
TableDemo.java:65: <identifier> expected
                data.addElement(aaaaa);
                               ^
TableDemo.java:74: <identifier> expected
                aaaaa.addElement(new String("Mary"));
                                ^
TableDemo.java:65: package data does not exist
                data.addElement(aaaaa);
                    ^
TableDemo.java:74: package aaaaa does not exist
                aaaaa.addElement(new String("Mary"));Friends i really got fed up with this code for more than half an hour.could anybody spot the problem?

I can see many:
1. i assume your code snip is inside a method. a local variable can not be declare private.
2. if you didn't import java.util.* on top then you need to prefix package on All occurance of Vector.
3. String in java are constant and has literal syntax. "Mary" is sufficient in most of the time, unless you purposly want to call new String("Mary") on purpose. Read java.lang.String javadoc.
Here is a sample that would compile...:
public class QuickMain {
     public static void main(String[] args) {
          java.util.Vector data=new java.util.Vector();
          java.util.Vector aaaaa=new java.util.Vector();
          data.addElement(aaaaa);
          aaaaa.addElement(new String("Mary"));
}

I have a problem with disable my account in apple store

hi i got a problem with disable my account apple store... so what should i do?

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it.
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Problem with the crystal viewer

Hi there,
I have a problem with thw crystal viewer. I have reports developped in Crystal XI that run in vb.net within the "CrystalDecision.Windows.Forms.CrystalReportViewer" object. On all computer client everything works fin except on one of them. When the print button is pressed, it gave a "Object reference not set to an instance of an object" error. Since this error is raised by the "Crystal report windows form viewer" preview window i have no idea why this occured. We tried to uninstall the viewer and reinstall it without chance.
The only thing i can tell is that this client use a "HP deskjet 3420 series" printer. that's the only difference there is on this computer. Anyone as an idea?
Thanks
Ben

Hi Ben,
Try moving that printer to another PC and install the print driver. If it fails there it's likely a driver issue. HP and Cr has a history of problems. Mostly it's HP drivers returning the wrong memory structure size.
If you can find someone who is using Windows XP and Windows 2003 and see if either work. Or possibly plug the printer ina print server and see if that works.
Next option is if you wrote the software you are running run it in debug mode and see if it captures anything when printing. If did not write it then ask the person who did to test it also.
Next option if you want to dig deeper into the cause is go to Windows site and download a program called DebugDiag. Run this program and set it to capture crashes. It will generate a dump file which can be analyzed. It should tell you which API or function caused the crash.
Thank you
Don

Problem with character code NCR (example : cộng h�a x� hội)

Dear
I have problem with character code NCR when display this string "cộng h�a x� hội" on web page using JSF. I print out like this c & # 7897 ; ng h � a x � h & # 7897 ; i
Thanks for help

jverd wrote:
A better approach would be to take a char rather than a String in that method, since it's a better model for what you're converting. A char would also let you use switch statement.I was going to say this as well but you beat me to it.
@OP, you really should use char for this. You're unnecessarily taking each char, converting it to a string, and working with the single-character string. That's not very efficient.

What is the problem with the code?

Hello, the following is a segment of code that I have written recently:
        IF DATA+1(5) <> TEXT-035.
          CATCH SYSTEM-EXCEPTIONS WEIRD_ERROR = 4
                                 OTHERS = 8.
            END CATCH.
          ENDIF.
When I tried to compile the code, it says:
Unable to interpret "SYSTEM-EXCEPTIONS". Possible causes: Incorrect spelling or comma error.
May I know where is the problem with this code? Thanks a lot!
Regards,
Anyi

Here is a list of the system exceptions.
Alphabetical List of Catchable Runtime Errors
,,ADDF_INT_OVERFLOW
Overflow in addition with type I ( ADD ... UNTIL / ADD ... FROM ... TO)
,,ASSIGN_CASTING_ILLEGAL_CAST
The offset and type of the source field and the target type do not match exactly in the components that are strings, tables, or references.
,,ASSIGN_CASTING_UNKNOWN_TYPE
The type specified at runtime is unknown.
,,BCD_FIELD_OVERFLOW
Overflow in conversion or arithmetic operations (type P with specified length)
,,BCD_OVERFLOW
Overflow in conversion or arithmetic operation (type P)
,,BCD_ZERODIVIDE
Division by 0 (type P)
,,CALL_METHOD_NOT_IMPLEMENTED
Call of a non-implemented interface method
,,COMPUTE_ACOS_DOMAIN
Invalid call of mathematical function ACOS
,,COMPUTE_ASIN_DOMAIN
Invalid call of mathematical function ASIN
,,COMPUTE_ATAN_DOMAIN
Invalid call of mathematical function ATAN
,,COMPUTE_BCD_OVERFLOW
Overflow in arithmetic operation (all operands type P)
,,COMPUTE_COSH_DOMAIN
Invalid call of mathematical function COSH
,,COMPUTE_COSH_OVERFLOW
Overflow in mathematical function COSH
,,COMPUTE_COS_DOMAIN
Invalid call of mathematical function COS
,,COMPUTE_COS_LOSS
Result of COS function is inexact
,,COMPUTE_EXP_DOMAIN
Invalid call of mathematical function EXP
,,COMPUTE_EXP_RANGE
Over- or underflow in mathematical function EXP
,,COMPUTE_FLOAT_DIV_OVERFLOW
Overflow in division (type F)
,,COMPUTE_FLOAT_MINUS_OVERFLOW
Overflow in subtraction (type F)
,,COMPUTE_FLOAT_PLUS_OVERFLOW
Overflow in addition (type F)
,,COMPUTE_FLOAT_TIMES_OVERFLOW
Overflow in multiplication (type F)
,,COMPUTE_FLOAT_ZERODIVIDE
Division by 0 (type F)
,,COMPUTE_INT_ABS_OVERFLOW
Integer overflow when calculating the absolute value
,,COMPUTE_INT_DIV_OVERFLOW
Integer overflow in division
,,COMPUTE_INT_MINUS_OVERFLOW
Integer overflow in subtraction
,,COMPUTE_INT_PLUS_OVERFLOW
Integer overflow in addition
,,COMPUTE_INT_TIMES_OVERFLOW
Integer overflow in multiplication
,,COMPUTE_INT_ZERODIVIDE
Division by 0 (type I)
,,COMPUTE_LOG10_ERROR
Invalid call of the mathematical function LOG10
,,COMPUTE_LOG_ERROR
Invalid call of the mathematical function LOG
,,COMPUTE_MATH_DOMAIN
Invalid call of a mathematical function
,,COMPUTE_MATH_ERROR
Error executing a mathematical function
,,COMPUTE_MATH_LOSS
Result of a mathematical function is inexact
,,COMPUTE_MATH_OVERFLOW
Overflow of a mathematical function
,,COMPUTE_MATH_UNDERFLOW
Underflow in a mathematical function
,,COMPUTE_POW_DOMAIN
Invalid argument when raising powers
,,COMPUTE_POW_RANGE
Over- or underflow when raising powers
,,COMPUTE_SINH_DOMAIN
Invalid call of the mathematical function SINH
,,COMPUTE_SINH_OVERFLOW
Overflow in the mathematical function SINH
,,COMPUTE_SIN_DOMAIN
Invalid call of the mathematical function SIN
,,COMPUTE_SIN_LOSS
Result of the function SIN is inexact
,,COMPUTE_SQRT_DOMAIN
Invalid call of the mathematical function SQRT
,,COMPUTE_TANH_DOMAIN
Invalid call of the mathematical function TANH
,,COMPUTE_TAN_DOMAIN
Invalid call of the mathematical function TAN
,,COMPUTE_TAN_LOSS
Result of the function TAN is inexact
,,CONNE_IMPORT_WRONG_COMP_LENG
Import error: A component in a structured type in the dataset has an incorrect length
,,CONNE_IMPORT_WRONG_COMP_TYPE
Import error: A component of a structured type in the dataset has an incorrect length
,,CONNE_IMPORT_WRONG_FIELD_LENG
Import error: A field in the dataset has an incorrect length
,,CONNE_IMPORT_WRONG_FIELD_TYPE
Import error: A field in a dataset has the wrong type
,,CONNE_IMPORT_OBJECT_TYPE
Import error: Type conflict between simple and structured data types
,,CONNE_IMPORT_WRONG_STRUCTURE
Import error: Type conflict between structured objects
,,CONVT_HEX_CONFLICT
Conversion conflict (Type X)
,,CONVT_NO_NUMBER
Value for conversion cannot be interpreted as a number
,,CONVT_OVERFLOW
Overflow in conversion (all types except type P)
,,CREATE_DATA_NOT_ALLOWED_TYPE
The statement CREATE DATA cannot be executed with a generic type.
,,CREATE_DATA_UNKNOWN_TYPE
The statement CREATE DATA cannot be executed with an unknown type.
,,CREATE_OBJECT_CLASS_ABSTRACT
Attempt to instantiate an abstract class.
,,CREATE_OBJECT_CLASS_NOT_FOUND
The class specified with a dynamic CREATE OBJECT was not found.
,,CREATE_OBJECT_CREATE_PRIVATE
Attempt to create an object of a class defined as 'CREATE PRIVATE'.
,,CREATE_OBJECT_CREATE_PROTECTED
Attempt to create an object of a class defined as 'CREATE PROTECTED'.
,,DATA_LENGTH_NEGATIVE
Invalid subfield access: Negative length
,,DATA_LENGTH_0
Invalid subfield access: Length 0
,,DATA_LENGTH_TOO_LARGE
Invalid subfield access: Length too large
,,DATA_OFFSET_NEGATIVE
Invalid subfield access: Negative offset
,,DATA_OFFSET_TOO_LARGE
Invalid subfield access: Offset too large
,,DATA_OFFSET_LENGTH_TOO_LARGE
Invalid subfield access: Offset + length too large
,,DATA_OFFSET_LENGTH_NOT_ALLOWED
Invalid subfield access: Type not appropriate
,,DATASET_CANT_CLOSE
Unable to close file. There may be no space left in the file system
,,DATASET_CANT_OPEN
Unable to open file
,,DATASET_NO_PIPE
The FILTER addition to the OPEN DATASET statement is not supported on the current operating system
,,DATASET_READ_ERROR
Error reading a file
,,DATASET_TOO_MANY_FILES
Maximum number of open files exceeded
,,DATASET_WRITE_ERROR
Error writing to a file
,,DYN_CALL_METH_CLASSCONSTRUCTOR
Attempt to call the class constructor
,,DYN_CALL_METH_CLASS_ABSTRACT
Attempt to call an abstract method
,,DYN_CALL_METH_CLASS_NOT_FOUND
Attempt to call a method of a non-existent class
,,DYN_CALL_METH_CONSTRUCTOR
Attempt to call the instance constructor
,,DYN_CALL_METH_EXCP_NOT_FOUND
Attempt to catch an unknown exception
,,DYN_CALL_METH_NOT_FOUND
Attempt to call an unknown method
,,DYN_CALL_METH_NOT_IMPLEMENTED
Attempt to call a method that has not been implemented yet
,,DYN_CALL_METH_NO_CLASS_METHOD
Attempt to call an instance method via a class
Attempt to pass a parameter with an incorrect parameter type
,,DYN_CALL_METH_PARAM_LITL_MOVE
Attempt to pass a constant actual parameter to a formal EXPORTING, CHANGING or RETURNING parameter
,,DYN_CALL_METH_PARAM_MISSING
An obligatory parameter was not supplied.
,,DYN_CALL_METH_PARAM_NOT_FOUND
Attempt to pass an unknown parameter
,,DYN_CALL_METH_PARAM_TAB_TYPE
Attempt to pass a parameter with an incorrect table type
,,DYN_CALL_METH_PARAM_TYPE
Attempt to pass a parameter with an incorrect type
,,DYN_CALL_METH_PARREF_INITIAL
An initial data reference was passed for an mandatory parameter.
,,DYN_CALL_METH_PRIVATE
Attempt to call a private method from outside
,,DYN_CALL_METH_PROTECTED
Attempt to call a protected method from outside
,,DYN_CALL_METH_REF_IS_INITIAL
Attempt to call a method with an initial reference
,,EXPORT_BUFFER_NO_MEMORY
The EXPORT data cluster is too large for the application buffer
,,EXPORT_DATASET_CANNOT_OPEN
The IMPORT/EXPORT statement could not open the file
,,EXPORT_DATASET_WRITE_ERROR
The EXPORT statement could not write to the file
,,GENERATE_SUBPOOL_DIR_FULL
The system cannot generate any more temporary subroutine pools
,,IMPORT_ALIGNMENT_MISMATCH
Import error: Same sequence of components, but with type conflict or different alignment in structured data types
,,IMPORT_TYPE_MISMATCH
Import error: Only with IMPORT...FROM MEMORY | FROM SHARED BUFFER...
,,MOVE_CAST_ERROR
Type conflict when assigning between object and interface references (only MOVE...?TO... or operator ?=)
,,OPEN_DATASET_NO_AUTHORITY
No authorizatino to access the file
,,OPEN_PIPE_NO_AUTHORITY
No authorization to access the file (OPEN DATASET...FILTER...).
,,PERFORM_PROGRAM_NAME_TOO_LONG
Invalid program name with PERFORM statement
,,RMC_COMMUNICATION_FAILURE
Communication error with Remote Method Call
,,RMC_INVALID_STATUS
Status error with Remote Method Call
,,RMC_SYSTEM_FAILURE
System error with Remote Method Call
,,STRING_LENGTH_NEGATIVE
Invalid access with negative length to a string
,,STRING_LENGTH_TOO_LARGE
Invalid access to a string (length too large)
,,STRING_OFFSET_NEGATIVE
Invalid access with negative offset to a string
,,STRING_OFFSET_TOO_LARGE
Invalid access to a string (offset too large)
,,STRING_OFFSET_LENGTH_TOO_LARGE
Invalid access to a string (offset + length too large)
,,TEXTENV_CODEPAGE_NOT_ALLOWED
Character set is not released in the system (SET LOCALE...)
,,TEXTENV_INVALID
Error setting the text environment (SET LOCALE...)
,,TEXTENV_KEY_INVALID
With SET LOCALE...: Value of LANGUAGE, COUNTRY or MODIFIER that is not allowed in the system.
,,TEXTENV_LANGUAGE_NOT_ALLOWED
With SET LOCALE...: Invalid value of the LANGUAGE addition.
What version of SAP are you on?   If on a newer version you may be able to create your own exception class.
Regards,
Rich Heilman

[svn:fx-trunk] 8277: Use blendMode="normal" to fix problems with disabled appearance when baseColor is set.

Revision: 8277
Author:   [email protected]
Date:     2009-06-25 17:46:00 -0700 (Thu, 25 Jun 2009)
Log Message:
Use blendMode="normal" to fix problems with disabled appearance when baseColor is set.
Bugs: SDK-19745, SDK-19762
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19745
    http://bugs.adobe.com/jira/browse/SDK-19762
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextInputSkin.mxml

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Problem with the Code in exercise 1.2

In this exercise:
http://www.adobe.com/devnet/flex/pdfs/exercise1.2.pdf
the first part is easy. Then you are instructed to go to the
Debug
Perspective and set a breakpoint that is below the function
you defined, but
ahead of the variable array.
You are shown that the variables window is populated in debug
view ..but
this is just not true. I did this myself .. and then I did it
again by
copying and pasting the code directly from the PDF into the
application and
I got the same result. The application is halted with an
empty variables
window. The example says it should be populated.
I suspect the problem is that the breakpoint was set too
early .. but it is
where it is supposed to be. Is my problem the example (my
code is identical
.. has to be since the second try is copied) or is my problem
the debug
player? I have always had problems with debugging in Flex.
Thanks!
Nancy

Hi,
Flex Builder 3 and Firefox 3 indeed do work together.
But there are some issues when certain extensions are used:
See
http://bugs.adobe.com/jira/browse/FB-13064
which led to a bug being filed against Firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=441424

Problem with disabled code view

Similar Messages

Maybe you are looking for