Problem with distribution pack install on ios device

I had released the distribution ac hoc package for my mobile app. it works fine on my iphone(ios 4.3.3, jailbreak). However, it can't install on other tester's device(ios 5). the provisioning profiles seen has no problem. Is anyone knows how to fix it?

Similar Messages

Problems with brand new install.. Device ID:5081h ???

Putting together a new system.
K8N Neo2 Platinum
AMD Athlon 64 3200+ Venice 1GHz FSB 512KB L2 Cache Socket 939 Processor
CMX512-3200LLPRO x2 Corsair Ram Sticks (Known good from another system)
ASUS ATI 9600 AGP video Card (Know good from another system)
WD 360 Raptor SATA HD X2 (Connected to onboard SATA)
Getting an odd message durring boot...
Warning:Have Option ROM can not be invoke (vendor ID:10DEh, Device ID:00DFh)
Trying to figure out what the device is, I belive the vendor is NVDIA... but no luck finding device.
Above and beyond this, i'm trying to install this
HighPoint RocketRAID 1820A 64-bit, 66/100/133MHz PCI-X SATA Controller Card RAID 0/1/5/10 JBOD
WD3000 Caviar SE SATA HD x5
When I have it installed, I get this in adition
Warning:Have Option ROM can not be invoke (vendor ID:10DEh, Device ID:5081h)
And no Bios shows up for the raid card.
Any help would be appreciated... If I go through and disable almost everything on the motherboard, the bios from the RocketRAID comes up.. I keep trying to isolate it to a singe device on the MB, but haven't had any luck.
MagnAxiom
P.S.
I've been to the MSI website.. newest bios I could find was 7025v19 I've since upgraded the bios on the MB.. no good.. same issues...
Tried updateing the RocketRAID as well, no good..

I'm suffering from the same problem .
I have an addin pci sata SIL 3112 card with two sata disks connected to it .
Disk 1 has WinXp64bits .
With two sata drives connected to sata 3/4 set in non raid mode i can see the SIL disks in the HD boot order .
But if I enable the Nvidia raid which host my xp32bits OS the disks from the SIL card disappears .
First i thought this was only with the 1.9x -> 1.a3 bioses but infact it like this all the way don to atleast 1.36 .
So if a want to boot my WinXp64 i have to disable the raid in bios , else this has 1'st priority and will always be the bootable MBR
even if the SIL card is visable in boot order on top or non visable at all.
Funky motherboard , and funky bioses .
But live and learn as they say .
Atleast i can have four sata disks and overclock past 230HTT clock reference which is something .
edit:
I just wonder if this "cannot invoke error string" message has been supressed from being displayed in earlier bioses
and infact doesn't change anything at all from pre 1.9x to 1.9 versions .

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

ITunes crashed during transfer purchases now says This computer has previously been synced with an iPhone or another iOS device

The problem that have started when I was going to sync my iPhone 4 with current iTunes running on 64bit Windows 7.
I started iTunes and plugged in my iPhone.
All looked good and the iPhone came up as the device as it should have.
Next I wanted to transfer purchases prior to syncing so I started the Transfer Purchases process.
iTunes stopped working during the Transfer Purchases process
Now when I plug in my iPhone iTunes takes me to the “setup your iPhone” screen and displays “This computer has previously been synced with an iPhone or another iOS device” and only allows me to restore and old backup or setup as new.
Obviously some files were not closed properly when iTunes crashed during the transfer purchases process, how can I cleanup iTunes so that it will allow me to backup and sync my phone.
I am a software developer and am sure that a fix is not in the menu options What I am saying is that I can easily remove or edit corrupt files to get it working.
Thanks, Mike

The error message you're seeing is likely the other way around -- i.e. something like "This iPhone has previously been synced with a different computer". There's no problem syncing multiple iOS devices to the same computer.
However, the reverse is not true for the iPhone -- you cannot connect an iPhone to another computer without it being erased, even if you manually manage music and video. So, it sounds like you've been syncing your iPhone to a different computer?
Also, 5.1 (not 5.0.1) is the latest iOS.

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

Problem with email since installing iOS 6.1.2

Since I installed iOS 6.1.2 on my iPad 2 my email has failed. I get an error message saying the mail server is not responding. Have no problems with this email account (ntlworld.com) on either my iPhone or PC. I've tried resetting the iPad with home/power button with no success. I'm not techy, so need an easy-to-follow solution please!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Problem with downloading and installing apps

When I start download or install new apps after few second whole operation slow down or stop. I have same problem when I start update old version of aplications. Can you please help.
I do not have problem with cnnection to internet.

Try this
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem with n 79 instal java software

hi
i have one problem with my nokia n 79
when i install a java software or game my device ask me where do u wana install? in memory card or memory phone.its natural.but if i select memory card when the installation finished autorun to start the program and software is disable and when i go to the application list are no icon of that progran to run.but in installation list there is it.so there is any icon andany way to run it.
its just abouy java program and install to memroy card
i dont have any problem with symbian in 2 memory and java when i install it in memory phone
please help me
thanks

dear alzaeem i ran java in before this time when i installed it in memory card
i dont know whay u say it doesnt run in memory card
before this i installed every application of java and symbian in memory card with out any problem and after installation icon of them were in application list
when i install java in memry card i dont have problem with installation and its complete installation and there is the name of that software java in installation list but my problem is that there is any icon of software in application list or every where to start or run it.

Problem with contacts after upgrading to iOS 7 (iphone 5)

After upgrading to iOS 7 (iphone 5), the contacts (loaded from icloud) in greek language aren't sorted!!! They are under the # symbol!! Anyone has a solution. I didnt have this problem with previous iOS versions!!!!

My phone was fine after I connected to iTunes. It appeared in recovery mode and then it downloaded the update, installed and all was fine.
Regards,
Jeevan.

Problem with distribution pack install on ios device

Similar Messages

Maybe you are looking for