Problem with dng raw converter

I install 8.5 raw converter but Lightroom did not see that Why?

These are two separate programs that do not know about each other's existence.
You use the DNG converter as a standalone program to convert RAW photos to DNG. Then you import the DNGs into Lightroom.

Similar Messages

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Has anyone else had problems with their RAW editing window?

I'm having real problems with my RAW editing window (the one that automaticaly pops up when you open a raw file). I've opened several images, but when I click on the different thumbnails on the left hand side the large preview image in the center doesn't change. Obviously I need to be able to see this to make the required changes.
Any ideas/help you be greatly appreciated!!!

Hi Kate,
I haven't yet been able to replicate your problem. Will you please describe your workflow? Are you simply selecting multiple files from your computer and double clicking to automatically open in Camera RAW?
Also curious, with all of your images open in the RAW editing window, what happens when you use the arrows near the bottom right? Does your image change?
Cheers,
Michael

Big problem with DNG converter

Hi
I would like to convert all my RAW CR2 canon to DNG (The format RAW CR2 change every time) and work with my PSE
I downloded DNG converter 6.5 and make a test but there is a big problème, the date of the .dng is not the date of the RAW, it's date of the convert...for me, it's impossible i want keep the original date.
Please, could you help me......
Thanks
René

rene_ladole wrote:
The problem is that the file date is changed by dng converter, when I want to rename the file with DNG as a parameter of the date of creation of the photo, the renamer is in the name of the date of creation dng, it can not go to my ranking of my photos ....
There are three potential dates with a digital capture, the Date/Time the file was created, the date/time the file was modified and the EXIF metadata Date/Time Original which is recorded by the camera at the moment of exposure. It is this final Date/Time that you would want to use in a name. Any time you create a new file–which is what DNG Converter is designed to do, you'll get a new date/time of that file's creation. That's not something the DNG Converter can change. If you take the DNG into ACR/Lightroom and modify the settings, you'll get a new date/time of the modification. However, the EXIF metadata will still correctly indicate the moment the capture was created in the EXIF Date Time Original tag.
So, what are you using to rename the files? If you are using Bridge to rename the file, the Date Time option when set to Date Created should be using the EXIF Date Time Original tag as the source of the date/time. Other apps should also be able to be set to use the EXIF Date Time Original tag.

Problem with DNG Color Profiles in Lightroom 5.4

Hello folks,
I recently updated from LR 5.3 to Lightroom 5.4 and since then I am having problem when using dng color profiles which were created with Colorchecker Passport. Every time I use such a profile which was created for my Nikon D 800 I get very greenish tones in the pictures.
I use Windows 7 Pro on a HP Z 210 Workstation. The monitor is a hardware-calibrated Quato which was recently calibrated.
Does anyone have this problem too and - if yes - know how to fix it?
Thanks!
Yours, Albert
PS: As English isn't my mother tongue I apologize for any mistakes in the text above.

Hello Andrew,
I do have a Nikon D 800 and a Fuji X-E1. I haven's noticed a problem with the Fuji so far. I think I will recalibrate my monitor tomorrow and see if the problem still exists.
I can supply raws and DNG profiles but I don't know where I should upload them - I suggest I could do it on my own webspace. Would that be ok?

Problem with recognition raw files from nikon d600

hello everyone, i hope someone can answer my question.
using cs5 with camera raw . camera raw is not able to open my nef files from my new nikon d600 . what can i do to update the plugin??
from the menu help updates in cs5 it tells me that all soft. is updated but it is still not working

You need to upgrade to PS CS6 in order to work with D600 raw files. Else, you can convert your raw files to DNG using DNG Converter.
For more details, check
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
DNG Converter: http://www.adobe.com/products/photoshop/extend.displayTab2.html
[Moved the discussion to Photoshop Forum]

Problem with Canon RAW 5D/7D Raw file and Magenta highlights

Hi everyone,
I've noticed a problem with some Canon RAW nightly shots when in scene are present magenta spotlights (also red and blue):
In the core of light, magenta color become "solarized" and white burned, and there is no way to recover it with any Adjustments. (also but in minor way, Red and Blue lights)
Opening the RAW file in Canon Digital Photo Pro the same images are perfect:
(left image Aperture3 - right image Canon DPP)
Any suggestion?

I have exactly the same problem with the 7D RAW files. I have tried Leopard+ Aperture 2, Snow Leopard + Aperture 3 trial and nothing makes a difference. Horrible magenta colour cast on the neutral tones, yet the blues are over-saturated and total lack of sharpness no matter what you do.
I shot JPEG (neutral) and RAW together so know what they should look like. I don't get any problems with Canon DPP software so the error seems to be in the Aperture RAW converter. The issue seems to be more apparent in low light or images with a lot of neutral tones, other images shot outside in good light appear to be pretty much ok. I even tried the latest version of Lightroom and that can't seem to handle them well either.
The link below was a thread that was running on the 7D problems, but no solution was ever provided.
http://discussions.apple.com/thread.jspa?threadID=2267875&start=0&tstart=0

Acrobat 11 Pro - problem with right-click "Convert to Adobe PDF" output folder

I'm migrating from one machine running Windows XP Pro with Acrobat 8 Pro to Windows 7 Pro with Acrobat 11 Pro.
On the XP machine, when I right-click on a document and select "convert to Adobe PDF" the process works just fine - it always outputs the file to the target destination I have set in the Adobe PDF printer definition.
On the Windows 7 Pro/Acrobat 11 Pro machine, the exact same settings are ignored: the PDF will always end up in the same folder as the source file.
Both the source folder and the destination folder are on one of my office's networked drives.
Under the Printing Preferences, I have the output folder address set the same on both machines, so it *should* go to the right location on the new machine.
Oddly enough, on the Acrobat 11 Pro machine, if I select Adobe PDF as the default printer and do a test print, it *does* print to the correct folder!
This has got me stumped!
Thoughts?
(update from later in the day)
If Adobe PDF is selected as the default printer, I *can* select a bunch of documents, right-click, select "print", and Word will open up, and they'll print to the correct target folder.
So, it's "just" the right-click "Convert to Adobe PDF" that doesn't work correctly.

The reinstall is typically the last ditch effort to do. The first step is Help>Repair and Help>Updates. As far as Office 2013, the PDF Maker of AA X is not compatible and you can only print. In your list of errors it showed a problem with AcroTray.exe. As a first step, go to the print and select print-to-file. The file will be a PS file (maybe with a PRN extension). Once the printer if finished, open the file in Distiller to complete the process. If that is successful, then the problem is with AcroTray. Check your running tasks to be sure AcroTray is indeed running. If not, that is likely the problem. If it is, then restart it (it is located in the Acrobat folder). AcroTray provides the interface between the PS creation and Distiller to automate the process of creating the PDF.

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Problem with S-raw from 1Ds mark III and Lightroom 2.5 (ACR 5.5)

Hello,
We develop over 100000 Raws per day using Lightroom 2.5 and a Canon 1 ds mark III. For the past six months we have been using the S-raw format for compatibility with our program Workflow. We’ve been having stability problems linked to luminosity, particularly differences in yellows, reds, oranges, and beiges.
This artefact lightens the whole of the image, which gives us several light densities within the same image series.
We’ve done several tests with photos shot in S-raw and JPEG simultaneously. The problem does not appear in the JPEGs, or in JPEGs generated by the S-raw format.
This is why we have concluded that the problem comes from Lightroom’s calculation algorithm for S-raw. This hypothesis is confirmed as the problem is only in Lightroom 2.5 (we’ve tested 5 competing programmes and have not had the same problem).
Ciao.

Problems with Lightroom should be posted in the Lightroom forum.
If you are having similar problems with some version of ACR, check the FAQ (http://forums.adobe.com/thread/311515?tstart=0) and provide more details, samples, etc... in a later post.

Apache/PHP - Problem with shell_exec - ImageMagick - convert

Hi,
I have a problem with running external commands from a webpage written in php using Apache. In this case I'm trying to run convert, which is a program in ImageMagick.
I can run most commands without any problems but when running these I get errors.
shell_exec("/usr/bin/convert -alpha Set -filter bessel -resize '200'x'200' -density '200'x'200' 'image.eps' -channel A -fx 'B' -negate '/var/im/4.png' 2>&1");
shell_exec("/usr/bin/convert 'image.eps' -alpha Set -filter bessel -channel A -fx 'B' -negate '/var/im/4.png' 2>&1");
shell_exec("/usr/bin/convert '/var/im/4.png' -density '200'x'200' -resize '200'x'200' '/var/im/5.png' 2>&1");
Error:
convert: Error when saving the profile into a file '.' @ warning/opencl.c/autoSelectDevice/2303.
The first command generates the new image but it is incorrect. The two others together gives me an output which looks correct but I still get the errors.
Running either of these commands directly via shell works great and generates the correct output and no error messages.
I would guess that the issue is how Apache handles the execution of shell_exec and the user that is used to run Apache. There is probably some restrictions that creates the issue but I'm note sure what.
I have tried running Apache using a new user I created which can run the commands correct directly in shell or by running "php -f testfile.php" but not through a webpage via Apache.
Any suggestions?
I also asked in the ImageMagick forum if anyone wants to check that they think so far.
http://www.imagemagick.org/discourse-se … =1&t=25418

are your files being uploaded correctly ?
i think u need to determine that first.

Problems with hyperlink when converting .docx to .pdf using Word 2010

I have a Word 2010 .docx document that has a link to a web site in it. The link works fine in Word, but does not work after the conversion to PDF. I am using the Acrobat add on in Word to create the PDF.
There is a pound sign ( # ) in the Word doc hyperlink and it is being changed to a percent sign ( % ) during the conversion to PDF. Any suggestions?

I will report the bug. I had read about some other problems with .docx files so I saved the .docx to .doc and then converted but I got the same results.
Thanks for the feedback.

I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

A Canon EOS D60? It had support since Camera Raw version 1.0.

Problem with Camera Raw update in Elements 11

I need to update the raw plug-in in elements 11, but when I go to the update section, I just keep getting an error message (which says server busy or might be prevented by firewall). I suspect that my firewall is stopping the updates, but I don't know how to over-ride this. Can anyone explain it please? (I have managed to 'allow' certain things on the firewall, but for this update, I don't know what I'm looking for to 'allow'!

I know nothing about Photoshop Elements. But, according to this list, Photoshop Elements can only work with Camera Raw through version 8.0.
Camera Raw-compatible Adobe applications

Problem with dng raw converter

Similar Messages

Maybe you are looking for