Problem with document dates

Hello dear friends,
I have a little problem with some document dates
I've created a sales order (tcode: VA01) on 07.05.2009
After creating delivery on 25.06.2009 and doing PGI at the same day, I've created billing invoice (tcode: VF01).
I've noticed in invoice header data the following:
System shows that the invoice was created on 01.07.2009.
But, under "accounting data" tab, the system shows billing date: 26.06.2009
What's going on ? I don't seem to understand !
Regards,
Bahia.
Edited by: Bahia M. on Jul 15, 2009 3:07 PM

Dear Bahia,
> My request is: I would like to make the system brings the sales order's date as the princing date in the invoice.
While maintaining the Sales order type in VOV8 we generally maintain the setting for Pricing date proposal., please check this, i guess this is blank in your case that is why system is proposing Todays date as pricing date Please change it to B.
in Invoice as the pricing in billng is copying from the Sales order date. This control is in copy control.
For this please check these
Goto VTFL,
Select Delvery and sales document type, Click on item right side, Select the correct item category, generaly it will be TAN.
Now there is two things One is pricing source and the other is pricing type.
Make the relevant setting and try to do the cycle again and give us your feedback, i guess it will help.,
Thanks,
Raja

Similar Messages

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Problem with input data format - not "only" XML

Hi Experts,
I have problem with input data format.
I get some data from JMS ( MQSeries) , but input format is not clear XML.
This is some like flat file with content of XMLu2026.
Example:
0000084202008-11-0511:37<?xml version="1.0" encoding="UTF-8"?>
<Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
...content....
</Document>000016750
Problems in this file is :
1. data before parser <? xml version="1.0"> -> 0000084202008-11-0511:37
2. data after last parser </Document> -> 000016750
This data destroy XML format.
Unfortunately XI is not one receiver of this files and we canu2019t change this file format in queue MQSeries ( before go to XI) .
My goal is to get XML from this file:
<?xml version="1.0" encoding="UTF-8"?>
<Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
...content....
</Document>
My questions:
1. Is any way or technique to delete this data 0000084202008-11-0511:37 in XI from this file ?
2. Is any way to get only XML from this file ?
Thanx .
Regards,
Seo

Hi Buddy
What is the XI adapter using?
If you use inbound File adapter content conversion you could replace these values with none and then pass it to the scenario.
Does that help?
Regards
cK

MIRO (Invoice Date) should be updated with Document date in MIGO Transactin

Hi all,
Please helo me in the issue . I need to replace the MIRO (Invoice Date) (INVFO-BLDAT)with Document Date in MIGO Transaction (MKPF-BLDAT). Can anyone suggest me the Userexit/ BADI for acheiving the same.

Hi,
We have same requirement that MIRO date should not be lesser than GRN date. How could you solve your problem/
rajeswari

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

Problem with documents on iCloud.

I have a problem with documents on iCloud, I can`t use it with Pages on Mac and iOS too, Pages not view any documents and can not approach to save documents and not save new documents to iCloud. Any idea?
Thank you for help.

Hello,
Winston and Shayari,
I have also faced this problem with document on iCloud, I couldn't saved the documents to iCloud,
But I found this article problem posted by Hindi love Shayari San and I found the solution this way:
I signed out, then singed in again renabled the iCloud and it works.
I could do this with the instructions of Winston told to Shayari.
Well, a big thanks from my side.
Veena

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Problem with document splitting

Hi,
I am encountering a problem with document splitting, where in while doing clearing of down payment against miro invoice profit center of first line item is over ridding profit center of second line item (line items are two different materials in purchase order).

Hi Milind,
Thanks for the reply.
I've done the below configuration and assigned cost/profit center update. It now works for profit center split. It still does not split accordingly per cost center though.
SAP Customizing Implementation Guide > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers >Ledger > Assign Scenarios and Customer Fields to Ledgers
In the below configuration, cost center is not an available option. Unlike the profit center which is available here.
SAP Customizing Implementation Guide > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting
The profit center split looks fine now, however the cost center split still is only reflected in the expense items and not on the AP item.
Any ideas on how to actually split the AP line items according to the cost center assignments ?
Edited by: Patrick on May 9, 2011 7:46 AM

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Problem with the date conversion

Hi Friends,
i am facing the problem with the date conversion, Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01).
I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFAULTS, The function module picks the exact user date setting (Like as MM/DD/YYYY, MM.DD.YYYY, DD.MM.YY).
After that i have implemented the FORMAT_DATE_4_OUTPUT funciton module for converting of the user role setting date format into system date format.
for the english language case the funciton module FORMAT_DATE_4_OUTPUT works fine but the funciton module not supported for other languages
Can you please provide the Function Moudle for user setting date conversion.
The funciton module is most important for us,
Thanks
Charan
Moderator message: date conversion questions = FAQ, please search before posting.
Edited by: Thomas Zloch on Dec 21, 2010 2:19 PM

Hope this logic helps you.
DATA LF_DATE TYPE DATS VALUE '21122010'. " 21-dec-2010
DATA LF_DATE_BI(10).
WRITE LF_DATE TO LF_DATE_BI. "Now LF_DATE_BI contains the date in user format
"Now populate the value LF_DATE_BI to the screen field

Problems with Document Connect

I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

Problem with a data set: DIAdem crashes

Hi,
I've got a problem with a data set. When I want to zoom in DIAdem-View, DIAdem crashes with the following message (translated from German ;-):
error type: FLOAT INEXACT RESULT or FLOAT INVALID OPERATION or FLOAT STACK CHECK
error address: 00016CB8
module name: gfsview.DLL
I've got some similar data set not showing such problems. Further on I scanned the data a bit, but in the 59000 points I didn't see anything special. I did try to delete "NOVALUE"s as well, but after that there still exist "NOVALUE"s.
Does anyone have an idea what to look for?
Thanks,
Carsten

Carsten,
Could you please upload you Citadel database to the following FTP site:
ftp.ni.com/incoming
If you want to compress (ZIP) and/or put a password on the data, that's fine. Please send me a private email at [email protected] (with the file name and password if you put one on the file) once you have uploaded the file and I will check it out.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Problem with document dates

Similar Messages

Maybe you are looking for