Problem with Document Size After Exporting

I created an 8 x 10 document with a .125 inch bleed. When I export it to a pdf, I made sure the crop marks and the use document bleed settings boxes were both checked as they should be. However, when I look at the document size in my pdf, it is about 7.5 x 9.5 rather than the 8.25 x 10.25 it should be (cutting on the crop marks should make it 8 x 10). Any ideas on what could be the problem? Thanks for the help!

Where are you seeing this reduced size?

Similar Messages

Problems with image size after PAL conversion

I edited my movie (captured in 16:9 mini DV) on Final Cut with all the right settings. I ran the video through DVFilm Maker which gives it a 24P/film-like look. In Final Cut Pro, this footage always looks "squished" but after exporting with Compressor (widescreen preset) and droping into DVD Studio Pro, it is in perfect 16:9 and looks fine.
Now I am trying to convert all this to PAL. I use the same company's DVFilm Atlantis to convert to PAL, and it is even more "squished" than the original, but after exporting with Compressor with PAL settings, it still looks squeezed on DVD Studio Pro.
I should say that I export the NTSC as a Quicktime movie (no conversion) with "current settings" and convert that to PAL.
[One of the options in Atlantis when converting is to "squeeze 16:9 into letterbox" I have done that, but the final product is small with a large black letterbox on all sides.]

Nattress' Standards Converter does a bang up job of converting NTSC to PAL. (and his film effects are very good as well) It all can be found at www.nattress.com
Compressor 2 can do this as well but takes longer and the results are less certain.
Cheerios,
x

Problem with document size and images in KM Repository

Hi,
We get a problem in KM that when we upload documents example pdf and so we donot get respective document icon and also the document size always shows as 0 Bytes.
Any suggestions?
Thanks,
Manish

Hi Manish,
I just uploaded a PDF, 2.8 MB. It appears, /irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/public/mimes/images/pdf.gif appears, 2.8 MB are shown.
You are using the standard KM "Folder - New - Upload" component? If yes, it's just a bug. If you use your own component, it's a bug too but then on your individual site.
Here it is tested on EP6 SP2 P4 HF6 / CM6 SP2 P3 HF4.
Hope it helps
Detlev

Problems with IC Web after export

This system is running in CRM 5.0, after that we made a import a system of 32 bits for a system 64 bits
We have a problems with some functionality in IC Web client, please help experts!!!
- Scroll bar, If I can use, I need to push double click
- Catalog of countries, I can't choose nothing, in the page display permission denied
- Catalog of states, I can't choose nothing, in the page display permission denied
Thanks !!!

I tried many Mozilla-based browsers (Mozilla, Netscape, FireFox) - all the same error with ...no properties ...;
I even can't see any IC Web Client window to check what is the situation with _htmlbMessageBar.
IE 6.0 SP1 and SP2 shows main screen but fails when start scripts.

Problems with document flowing after placing a movie inline

I'm trying to place a movie inline and have the contents surrounding it reflow, instead when the movie is placed it overlaps all of the contents above it.
I'm placing a movie using the following code:
paragraph.insertionPoints[-1].place(File("c:\\users\\kurt\\desktop\\movie\\test.flv"));
And this is the resulting behaviour:
The odd part is that when I tested this against blank templates I had these results, which are the result I was hoping for. The surrounding paragraphs simply reflow to accomodate the movie.
Any ideas on why the other document isn't reflowing to the placed movie?

Just to make it a bit easier to refer to anchored object you could probably use
paragraph.insertionPoints[-1].words[0].allPageItems[0].anchoredObjectSettings.anchorYoffset = 10;
Not the best but unlikely to fail and easy.
If you were inserting an oval or the like you would just use.
myOval = paragraph.insertionPoints[-1].ovals.add();
myOval.anchoredObjectSettings.anchorYoffset = 10;
but you can't do that with placed images

Problem with font size, not showing up as expected.

I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
http://www.kgngroup.net/logos_and_packaging.html
I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
Not sure where to go from here. I just want to get the body font down to 10 pixels.
TIA,
Ken

John Waller wrote:
I guess this a follow up to your earlier thread
http://forums.adobe.com/message/3627681
What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
e.g.
The tiny font in the RHS column is affected first by
.style8 {
font-size: 0.5em;
affecting the <td> then by
.style11 {font-size: 75%}
affecting the <p> tag.
End result = tiny text (approx 2px).
In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically starting from the <body> tag downwards.
That'll give you a solid baseline without weird effects.
Ah, I find your answer worth repeating.
Very cool that you have diagnosed so well and spelled it out here.
I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
Thank You,
Ken

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Peggy
You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
Two more questions:
1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
Daveben

Problem with document

Hi All,
I've got error message : "problem with document numbering file. Restore the file and contact your software vendor..." after importing some invoices. The first line of message is 2100oInvoices.
Pls give advice how to resolve it. Thx
John

Dear,
Try below procedure:
Log off by File Exit, restarting the system, and logging on again.
If can't sovle your issue, you have to follow the recommandation from Du or log a message to SAP
Regards
Apple

Problem with documents on iCloud.

I have a problem with documents on iCloud, I can`t use it with Pages on Mac and iOS too, Pages not view any documents and can not approach to save documents and not save new documents to iCloud. Any idea?
Thank you for help.

Hello,
Winston and Shayari,
I have also faced this problem with document on iCloud, I couldn't saved the documents to iCloud,
But I found this article problem posted by Hindi love Shayari San and I found the solution this way:
I signed out, then singed in again renabled the iCloud and it works.
I could do this with the instructions of Winston told to Shayari.
Well, a big thanks from my side.
Veena

Problem with Cell size in Excel output of XML report

Dear all,
I am facing a problem with cell size when i run my XML report in Excel output. I found that it imitates the cell size of whatever i gave in the RTF. I cannot increase the cell size in RTF as my report contains 60 columns and max width of MS Word table is 22 inches.
Can any one suggest a way of doing this which shows full data in Excel sheet depending on the column data size with out any word wrap.
Thanks
RAJ

Hi ,
You can try with
<xsl:attribute xdofo:ctx="block" name="wrap-option">no-wrap</xsl:attribute>
may be helpful to you
Thanks,
Ananth
http://bintelligencegroup.wordpress.com/

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 : Subsequent correction to 1567679
Regards,
Arvind

Problem with iWeb 09, after the publication in a local file.

*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.

I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

Problem with document splitting

Hi,
I am encountering a problem with document splitting, where in while doing clearing of down payment against miro invoice profit center of first line item is over ridding profit center of second line item (line items are two different materials in purchase order).

Hi Milind,
Thanks for the reply.
I've done the below configuration and assigned cost/profit center update. It now works for profit center split. It still does not split accordingly per cost center though.
SAP Customizing Implementation Guide > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers >Ledger > Assign Scenarios and Customer Fields to Ledgers
In the below configuration, cost center is not an available option. Unlike the profit center which is available here.
SAP Customizing Implementation Guide > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting
The profit center split looks fine now, however the cost center split still is only reflected in the expense items and not on the AP item.
Any ideas on how to actually split the AP line items according to the cost center assignments ?
Edited by: Patrick on May 9, 2011 7:46 AM

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Problem with Document Size After Exporting

Similar Messages

Maybe you are looking for