Problem with Dreamweaver & csv file!!!!

Working on website...
www.banners4churches.com
Website has special pricing matrix...
http://www.banners4churches.com/current/banners/order_custombanners.php
Excel .xml file is run through Linux Fedora 10 wKDE and cli.sh to create .csv file for Dreamweaver. The .xml file was updated and the new .csv file was inserted back into the root folder for DW. Was working properly before changes, but now it shows error message "call."
Been working on this problem for days!!!! Any help is greatly appreciated. Thank you.
Mike

tiggercald wrote:
Been working on this problem for days!!!! Any help is greatly appreciated. Thank you.
What is the problem? The pricing matrix at the URL you provided is working. If it's something not working on your local system, nobody can help unless they see the code you're working with. In any case, it sounds as though there's something wrong with the CSV file, not with Dreamweaver.

Similar Messages

Vista problem with Dreamweaver locking files indiscriminately - I'm not alone

I've seen questions posed in the past about Vista locking files - and I am having the exact same problem, which I posted about a while ago. Today it happened to me again.
There appears to be no pattern as to why this happens. Was happening to me continually until a few weeks ago. Then it stopped without me taking any course of action (just putting up with the annoying bug is all I could do).
You just have to remember to save the file under a different name to ensure that you don't lose your original file. The original file does not appear in the File Manager window (after you close down DW, nor does it appear in the Trash bin - it's just gone).
Initially I thought it may be due to having the file open, checking it in Firefox and possibly FF taking over the file, so it gets locked by DW. Today, I only opened the file (no checking in a browser at all) made a minor correction and I was locked out of the file.
Co-incidentally, a few hours ago, I found a website via twitter where this seems to be a known issue, but no there appears to be no response from Adobe about this bug. http://www.sherylcanter.com/wordpress/2009/05/locked-vanishing-files-in-dreamweaver-and-in design/
Previously, I used to restart the pc and I'd lose the file altogether (as explained above). After reading the above website, I'm going to leave DW open for a while to see if it's true about the file 'unlocking itself'. Thankfully,, this time, I did backup the file just in case. In the past I'd lost a fair amount of work, that I'd had to recreate - very annoying !!
I thought I'd post up a graphic of the error messages - to see if others are seeing the same thing. This will need to be bought to the attention of the DW tech team, but not sure how they can address the issue as it is a difficult thing to reproduce on a consistent basis.
AN UPDATE; Checked for the file in Windows File manager - the index.html page is not listed in the sitefolder. Back to Dreamweaver, you can still see the locked file, do a refresh and the index.html file has disappeared.
I open index2.html (the resaved version of index,html), rename it to index.html and it allows me to do so this time round.
PS: At the same time I opened inner.html, made a change, no problems with the file locking.
Weird !!
Further update:
Just found a reply by David Powers here: http://forums.adobe.com/thread/437034?tstart=30
I had tried to do a search using similar keywords when this started happening to me months ago - couldn't find anything at the time.
I even posted to a private forum where people should have known about this issue - but it was never responded to.
Will see if this fix works for me.... though I can't understand why it only does this occasionally - if someone needs to take control of the folder, surely it should be happening all the time.

Nadia,
Although Dreamweaver "reveals" and demonstrates it, I think that it's a deep-seated Vista permissions issue.
It's random and occurs on files I create from scratch and files I receive from others.
Full permissions for every single user and group on my PC doesn't work.
"Take ownership" by my account or Administrator or Administrators or System or Everyone or Authenticated Users doesn't work.
UAC deactivation doesn't work.
Command prompt to unset attributes (like read-only) says it ISN'T read-only, but the right-click properties show that it is.
Only this works so far.
Activate Vista's Administrator account (be sure to then set a password for it).
Log in as Administrator, and the issue no longer occurs.
Here's a link for instructions on how to activate the Vista Administrator account.
Enable the (Hidden) Administrator Account on Windows Vista [The How-To Geek]
I'm open and hopeful for a better solution, but for now I've got work to do, so I'm using Dreamweaver logged in as Administrator.

Problems with a .csv file in an AP conversion.

Hi,
I'm trying to upgrade an Ap1240AG, from stand alone to LWAPP.
The question is â¦ in the process of upgrading we have to create a .csv file to put some information in the WLC to manually associate the AP (now an LWAPP AP).
That .csv file has the mac address of the AP, their certification type, and public key hash values.
Who can I get this .csv file?
Thanks in advance,
Rui CapÃ£o

Hi Rui,
The .csv is generated when running the Upgrade Tool (check the first doc linked below) :)
Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp176272
LWAPP Upgrade Tool Troubleshoot Tips
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml#prob
Hope this helps!
Rob

Problems with importing csv file

Ive just thought of a problem i may have importing a csv text file into java and then tokenizing it to be used to as a query to insert the data into a sql database.
if the fields are surrounded in quotes (which sometimes they are) this means usually because there is a comma within the cell
e.g.
"1","myname","10 address road,addressington","55512345"
now when i tokenize that i will get the wrong result as it will store
1
myname
10 address road
addressington
55512345
when i want it to store
1
myname
10 address road,addressington
55512345
Does anybody know a way round this.
and can anybody suggest any good examples or tutorials on how to import a delimited data text file into java and then upload the data to a sql database.

You need to upgrade from StringTokenizer to ...
(dum dum DUM)
StreamTokenizer. It will pull tokens as you'd like to see them, but it's a lot more complex. Check it out.

Problems with Exporting CSV files

When I tried to export the Project Management Sample Table, I noticed that the last five unchecked check boxes weren't part of the exported file. I should have seen the value False. Instead there was no value provided. This seems like a bug.
1019,Cell Editing,Text & Cell Styling ,"Font styling (Bold, Underline, Italic), Background color, Alignment, Cell border",Future,Hickey,Woodmansee,160,150,Within Budget,
1020,Formulas,Robust formula engine ,"Support for significantly more math, statistics, financial and logical formulas",Enhancement,Qualizza,Woodmansee,120,130,Over Budget,
1021,Formulas,Formula copy and paste,Ability to reuse a formula by simply copying 'n pasting it in a different cell,Future,Qualizza,Woodmansee,30,25,Within Budget,
1022,Cell Editing,Hyperlinks,Recognize http or WWW in text and make it clickable,Future,Rein,Parmar,40,30,Within Budget,
1023,Cell Editing,Choice List,Select a value from a pre-specified list of choices in a column,Future,DeHoyos,Parmar,40,30,Within Budget,

I have just replicated this issue with the Excel export as well.

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

How can I email using UTL_SMTP with a csv file as an attachment?

Dear All,
It would be great if someone could help me. I am trying to use UTL_SMTP to email with a csv file as attachment. I do get an email with a message but no attachment arrives with it.
In fact the code used for attaching the csv file gets appended in the message body in the email.
CREATE OR REPLACE PROCEDURE test_mail
AS
SENDER constant VARCHAR2(80) := '[email protected]';
MAILHOST constant VARCHAR2(80) := 'mailhost.xxxx.ac.uk';
mail_conn utl_smtp.connection;
lv_rcpt VARCHAR2(80);
lv_mesg VARCHAR2(9900);
lv_subject VARCHAR2(80) := 'First Test Mail';
lv_brk VARCHAR2(2) := CHR(13)||CHR(10);
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25) ;
utl_smtp.helo(mail_conn, MAILHOST) ;
dbms_output.put_line('Sending Email to : ' ||lv_brk||'Suhas Mitra' ) ;
lv_mesg := 'Date: '||TO_CHAR(sysdate,'dd Mon yy hh24:mi:ss')||lv_brk||
'From: <'||SENDER||'>'||lv_brk||
'Subject: '||lv_subject||lv_brk||
'To: '||'[email protected]'||lv_brk||
'MIME-Version: 1.0'||lv_brk||
'Content-type:text/html;charset=iso-8859-1'||lv_brk||
' boundary="-----SECBOUND"'||
''||lv_brk||
'-------SECBOUND'||
'Some Message'
          || lv_brk ||
'-------SECBOUND'||
          'Content-Type: text/plain;'|| lv_brk ||
          ' name="xxxx.csv"'|| lv_brk ||
          'Content-Transfer_Encoding: 8bit'|| lv_brk ||
          'Content-Disposition: attachment;'|| lv_brk ||
          ' filename="xxxx.csv"'|| lv_brk ||
          lv_brk ||
'CSV,file,attachement'|| lv_brk ||     -- Content of attachment
lv_brk||
'-------SECBOUND' ;
dbms_output.put_line('lv_mesg : ' || lv_mesg) ;
utl_smtp.mail(mail_conn, SENDER) ;
lv_rcpt := '[email protected]';
utl_smtp.rcpt(mail_conn, lv_rcpt) ;
utl_smtp.data(mail_conn, lv_mesg) ;
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
NULL ;
WHEN OTHERS THEN
dbms_output.put_line('Error Code : ' || SQLCODE) ;
dbms_output.put_line('Error Message : ' || SQLERRM) ;
utl_smtp.quit(mail_conn) ;
END;

LKBrwn_DBA wrote:
Use UTL_MAIL instead.That package is an utter disappointment - and an excellent example IMO of how not to design an application programming interface. Even the source code is shoddy.. I mean, having to resort to a GOTO statement....!!?? The person(s) who wrote that package are sorely lacking in even the most basic of programming skills if structured programming is ignored and a spaghetti command used instead.
No wonder the public interface of that code is equally shabby and thoughtless... The mail demo code posted by Oracle was better written than this "+package+" they now have bundled as the official Mail API.
I dunno.. if I was in product management there would have been hell to pay over pushing cr@p like that to customers.

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

InDesign CS5 causing problems with InCopy assignment file but not content files

I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
Andrea

Thanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea

Problem with Dreamweaver & csv file!!!!

Similar Messages

Maybe you are looking for