Problem with drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA)

Hello
Please help to find drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA) for:
1) ACPI\HPQ6007
2) USB\VID_138A&PID_0050&REV_0060
It is detected as "unknown devices"

Hi:
You need these drivers...
ACPI\HPQ6007:
HP 3D DriveGuard Software
File name: sp67280.exe
USB\VID_138A&PID_0050:
Validity Fingerprint Sensor Driver
File name: sp66110.exe

Similar Messages

Problems with drivers and Windows after restoring

Hey All, I hope you can help because I have myself a confusing problem.
I have a Satellite A500 series laptop running Windows 7 Premium.
I recently had a hard drive fail. I have replaced the hard drive and used the restore/recovery disks provided to me by Toshiba.
My problem is, during the recovery I am informed that two drivers do not have the necessary Digital Signatures. These are the Realtek RTL9191SE Wireless LAN 802.11n PCI-E NIC and the TOSHIBA Firmware 64 bit Drivers.
Once recover was complete I tried to use the computer and had several issues that may be connected:
1. I cannot get any Microsoft updates- which includes any of the troubleshooting options etc. Apparently the service is not running. Even if I got to the website I can't get anything.
2. My Microsoft Office produce key code (printed on the botton of my laptop) is "incorrect"
3. My wireless will not work because there is no digital signature validation (code 52)
I know my wireless if functional because if I press F8 during boot up I get the option to ignore signature validations and can get on the internet. From there I did download and install an updated driver from the TOSHIBA website, which had no effect (I got the same error, even after uninstalling the other driver). Even while ignoring signatures I cannot update windows or use any of the computers troubleshooting or assistance.
I have tried restoring a second time to no avail (got the exact same errors). Any suggestions to getting this computer back to "out of the box?" Or at least functional enought I can surf the web and work on my Excel charts?
Thanks
Loren

In another thread, a similar problem was solved by installing the Intel driver iata_enu.exe from here.
Intel Rapid Storage Technology
That's supposed to take care of a change in the hard drive's properties.
-Jerry

Nokia 5800 problem with drivers windows 7 32-bit

Hi, i have problem with drivers for 5800 in windows 7, all drivers except modem and cdc comms work, how can i update drivers for that, i have installed lates nokia suite 3.3 and newest cable drivers, i try drivers 6.x but then my 5800 is not recognized, what is the solution?

Hi:
You can use the W7 x64 drivers from the 250 G2 support page. They have the 32 bit driver files too.
That would be for all but the graphics if your G2 has a Pentium or Celeron processor.
If your notebook has one of those processors, then download, unzip and run the graphics driver setup exe file from the link below.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23889

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

Cellular data is a feature from your phone carrier. Have you contacted them to resolve your issue.

I am having major problems with the latest update for my itunes!

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'. I have completely uninstalled itunes but now it wont download at all. Have tried downloading it 4 times tonight already. Anyone know how to get it to download? Or what to do?

I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

Problemas with file "ns_emails.xml" for SMTP EXCHANGE

Hi,
I have problems with my ns_emails configuration for a SMTP EXCHANGE Mail Server.
I configured Outlook with this parameters and works: Autenthication: yes, SSL: yes, port: 25, host: gmail.smtp.com.
In my BPEL process is a right msg, but the email doesn`t arrive:
<2008-01-27 19:19:51,781> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
Please, ¿do you see something wrong with this file?
<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
EmailMimeCharset=""
NotificationMode="EMAIL">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Laura</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</User>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">mypass</Password>
</OutgoingServerSettings>
</EmailAccount>
</EmailAccounts>
Thanks,
Laura

Hi,
I know about domain.log file. In my first post, I put the message that I get.
The problema is with the SMTP Exchange MS Server.
I tried with a Local Mail Server with this parametes and its right.
<GeneralSettings>
<FromName>Laura Garcia</FromName>
<FromAddress>testuser@lgrico-port</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>lgrico-port</SMTPHost>
<SMTPPort>25</SMTPPort>
<UserName>testuser@lgrico-port</UserName>
<Password>laura</Password>
</OutgoingServerSettings>
But with this configuration its wrong:
<OutgoingServerSettings>
<SMTPHost>smtp.gmail.com</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>true</AuthenticationRequired>
<UseSSL>true</UseSSL>
<UserName>[email protected]</UserName>
<Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">pass</Password>
</OutgoingServerSettings>
My company has the same kind of mail server than gmail, so I,m trying to configure this first.
This is domain.log and it`s right, I can´t see where is the problem.
<2008-01-29 09:26:05,006> <INFO> <default.collaxa.cube.services> <Utils::initNotificationMode> Notification via voice, fax, SMS, IM or pager will be sent. Emails will be sent with the current settings. If you would like to enable them, please configure accounts in ns_iaswconfig.xml and then set the NotificationMode attribute in ns_emails.xml to either NONE, EMAIL or ALL.
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Creating connection pool for java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory initial size 20
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=19
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 50d528357d42a957:-4d67d6df:117c49fc103:-7fcf
<2008-01-29 09:26:05,053> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> End Persisting notification in database
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message)
<2008-01-29 09:26:05,100> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Released queue connection to pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=20
Thanks for your answers,
Laura

Hi I have a problem with my licence number for Lightroom

Hi I have a problem with my licence number for Lightroom, has been forced to re-install lightroom again but, have downloaded a trial version of adobe but now works license number are not, there are some who can help me with what is going wrong. Thanks Henrik

Download Lightroom 5 from Product updates and install, use your serial number

Is there a problem with JFrame and window listeners?

As the subject implies, i'm having a problem with my JFrame window and the window listeners. I believe i have implemented it properly (i copied it from another class that works). Anyway, none of the events are caught and i'm not sure why. Here's the code
package gcas.gui.plan;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.event.WindowEvent;
import java.awt.event.WindowListener;
import java.util.Hashtable;
import javax.swing.JDialog;
import javax.swing.JFrame;
import gcas.plandata.TaskData;
import gcas.util.GCASProperties;
import gcas.gui.planlist.MainPanel;
* MainFrame extends JPanel and is the main class for the plan details window
public class MainFrame extends JFrame implements WindowListener
     * the container for this window
    private Container contentPane;
     * a string value containing the name of the plan being viewed
    private String labelText;
     * a string value containing the name of the window (GCAS - plan list)
    private static String title;
     * an instance of JDialog class
    private static MainFrame dialog;
     * hashTable that correlates the task name to its id as found in the
     * plan
    private Hashtable taskNameToId = new Hashtable();
     * an instance of taskSetPane. This is the current instance of taskSetPane
     * being viewed
    private PlanTaskSet currentPane;
     * instance of TaskData class. Each instance will hold information on
     * an individual task
    private TaskData taskData;
     * hashTable containing instances of the taskSetPane class
    private Hashtable taskSetPanes = new Hashtable();
     * an instance of the OuterPanel class
    OuterPanel mainPanel;
     * an instance of the ButtonPanel class
    ButtonPanel buttonsPanel;
     * an instance of the LeftPanel class
    LeftPanel leftPanel;
     * an instance of the the GCASProperties class
    GCASProperties gcasProps;
    private static MainFrame thisPlanMain = null;
    private MainPanel planListMain;
     * constructor for MainFrame
     * @param frame the parent frame calling this class
     * @param locationComp the location of the component that initiated the opening of the dialog
     * @param labelText the name of the plan that is being viewed
     * @param title title of window
    private MainFrame(JFrame frame, Component locationComp, String labelText,
            String title)
        super(title);
        gcasProps = GCASProperties.getInstance();
        mainPanel = new OuterPanel(labelText, currentPane,
                taskNameToId, taskSetPanes);
        leftPanel = mainPanel.getLeftPanel();
        System.out.println("LABLE: " + labelText);
        leftPanel.setMainPanelContents();
        buttonsPanel = new ButtonPanel(labelText, taskSetPanes,
                taskNameToId, leftPanel);
        contentPane = getContentPane();
        contentPane.add(mainPanel, BorderLayout.CENTER);
        contentPane.add(buttonsPanel, BorderLayout.PAGE_END);
        this.addWindowListener(this);
        this.labelText = labelText;
        pack();
        setLocationRelativeTo(locationComp);
        this.setVisible(true);
        planListMain = MainPanel.getInstance();
        planListMain.setVisible(false);
    public static MainFrame getInstance(JFrame frame, Component locationComp, String labelText,
            String title)
        if (thisPlanMain == null)
            thisPlanMain = new MainFrame(frame, locationComp, labelText,
                    title);
        return thisPlanMain;
    public static MainFrame getDialogObject()
    {   //from the location this is called (ButtonPanel), this will never
        //be null
        return thisPlanMain;
    public static void setABMDDialogNull()
        thisPlanMain = null;
     * returns an instance of MainFrame
     * @return MainFrame instance
    public static MainFrame getDialog()
        return dialog;
     * setter for MainFrame
     * @param aDialog a MainFrame instance
    public static void setDialog(MainFrame aDialog)
        dialog = aDialog;
     * window opened event
     * @param windowEvent the window event passed to this method
    public void windowOpened(WindowEvent windowEvent)
     * The window event when a window is closing
     * @param windowEvent the window event passed to this method
    public void windowClosing(WindowEvent windowEvent)
        gcasProps.storeProperties("PlanList");
        MainPanel abmd = MainPanel.getInstance();
//        planMain = this.getDialogObject();
//        if(planMain != null)
//            planMain.setVisible(false);
//            abmd.setVisible(true);
//            planMain.setABMDDialogNull();
        if(this.getDialogObject()!= null)
            abmd.setVisible(true);
            setVisible(false);
            setABMDDialogNull();
     * Invoked when the Window is set to be the active Window
     * @param windowEvent the window event passed to this method
    public void windowActivated(WindowEvent windowEvent)
     * Invoked when a window has been closed as the result of calling dispose on the window
     * @param windowEvent the window event passed to this method
    public void windowClosed(WindowEvent windowEvent)
     * Invoked when a Window is no longer the active Window
     * @param windowEvent the window event passed to this method
    public void windowDeactivated(WindowEvent windowEvent)
        System.out.println("HI");
     * Invoked when a window is changed from a minimized to a normal state
     * @param windowEvent the window event passed to this method
    public void windowDeiconified(WindowEvent windowEvent)
        //we could have code here that changed the way alerts are done
       System.out.println("Invoked when a window is changed from a minimized to a normal state.");
     * Invoked when a window is changed from a normal to a minimized state
     * @param windowEvent the window event passed to this method
    public void windowIconified(WindowEvent windowEvent)
        //we could have code here that changed the way alerts are done
//        System.out.println("Invoked when a window is changed from a normal to a minimized state.");
}anyone know whats wrong?

It turned out that my ide was running the old jar and not updating it, so no matter what code i added, it wasn't being seen. Everything should be fine now.

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

Problem with touchpad and Windows 8.1. Acer Aspire E5-511

I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).

SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

Problem with the Finder window in Chrome

Hello,
I have a problem with my finder window in Chrome.
Since the window isn't a separate window anymore, but stuck to the top of the webpage, my finder window is too big. I can't read the "Cancel" or "Send" (I have no idea what's supposed to be there in English but I assume it's something like "send" and "cancel") buttons. I have provided some images of the problem, even if I make the Chrome window as small as possible, the finder window still is too big for my screen. I can resize the finder window from lest to right, but not up or down, which is extremely irritating for me.
If anyone can help me how I can solve this problem.
Thanks!

I found the solution on another thread...Here it is.
"I was having the same problem. I found a way to make it smaller. First, I opened chrome and clicked the green button on the window to make chrome go into full screen. Then I tried to save a file to make the finder window open in chrome. When it opened in full screen I could see the bottom of the window so I resized it to make it a little smaller. Once I did this it remembered the size so now I can access the bottom buttons when I take it out of full screen mode. Hope this helps."
Worked like a charm!

Problem with drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA)

Similar Messages

Maybe you are looking for