Problem with dropped pixels in video systemwide

I'm noticing pixels in random frames of video which are discolored. To be more exact, the problem occurs in several areas of a single frame, and the discoloration is usually a cluster of pixels - a small square or rectangle which is green or purple, and then after the frame which has multiple bad areas the video is perfect for anywhere from a second to perhaps minutes.
It's not a camera problem - this is showing up in ANY video which is processed by the computer. I have imported clean DV footage through QT Player and seen it. I am seeing it in raw P2 files which are simply copied onto an external disk. I am seeing it in clean files which are compressed into a different format. Once the effect is seen, it is permanently on the frame, and is carried through to FCP without ever going away.
This is really weird. I don't see a way to upload an image, but I have some if there's any way to show anyone what I'm talking about.
Any ideas? Thanks!

I'm pretty sure I've figured it out. The problem seems to be my OWC Express Slot SATA card. The one common element to all the issues are that the bad files have been transferred through that card. I have three eSATA drives, and I can replicate the problem on any of them when I use the card, but when I use the same drives with a USB or Firewire connection they're clean. Different SATA cables too. It has to be the card.
I'll contact OWC today to see about replacing it, and if for some reason the problem persists it Could be the express card circuitry inside the machine... hope not!
Thanks!
Dave

Similar Messages

  • Problems with dropped frames in FCP 4.5 Log & Capture

    Thanks for the advice on my previous post regarding sound problems - those are now sorted, but I am having problems with dropped frames in Log and Capture. I am using FCP 4.5 with OS X 10.4.10 on a Powermac G4. CPU 867 mhz dual processor. L2 Cache 256 kb, L3 cache 1 mb. Memory 1g. Bus speed 133hz. I am capturing from a Canon XM1 via Firewire. The scratch disk is a 500gb Seagate FreeAgent USB 2.0, 7200rpm.
    Basically, the video and audio are fine while playing back in Log and Capture and I can control the device, but any attempt to capture, whether Capture Now or Clip result in a very jerky picture and aborts with dropped frames after a few seconds. The sound is ok for the few seconds before it aborts. There do not appear to be any problems with the timecode.
    My capture preset is DV Pal 48hz.
    Any advice or pointers gratefully received.
    Thanks, Ally

    Well quite. I have just tried it in the internal hard drive and it works fine now. I am going to have to capture everything to my small hard drive and move it across to the external. Then, when I have finished I am going to bang my head against the wall and buy an external HDD with Firewire.
    Thanks,
    Ally

  • Problem with youtube and other video websites

    I have a problem with youtube and other video websites:
    Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
    I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
    I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
    grts,
    agrash

    Hmm, so that person had a conflicting plug in.
    Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash

  • Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

    Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

    There's a good chance that this is a known issue.  We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

  • Problem with dropped connections...

    Hi,
    I'm having a problem with dropped connections. Let me explain...
    I have a computer with Windows XP SP3 where I have installed Toad, PuTTY and Oracle 10g client. I need to connect to several database and Linux hosts and have a strange problem. What happens is the following:
    1 - When I arrive at a customer location, I boot up my computer (I'm not using hibernate or standby) and plug-in to the network.
    2 - After I login to Windows, every session in PuTTY (to Linux), SQL*Plus or Toad (to database) gets dropped after only a few seconds.
    3 - I reboot my computer again, and everything works fine.
    I have no explanation for this beahavior. This happens across different customers, database versions and Linux OS kernels and versions. It seems to be related to something in my computer that is fixed on the 2nd restart.
    Has anybody experienced any similar problem?
    Thank you!

    pmcatarino wrote:
    I plug directly at client's site.
    And I can access the web and messaging on the first reboot... the only thing that appears to be malfunctioning is putty and toad as I stated above.
    Edited by: pmcatarino on Oct 24, 2008 6:25 PMDoes that mean you can ping to the server without problem when putty and toad having problem?
    If you install an Oracle client on your machine and configure TNS, will the sqlplus drop as well? Or download and install SQL Developer, see if SQL Developer having any problem connect.

  • [SOLVED]Asus UX32VD, problems with ACPI and Intel video driver

    1. The bigger problem seems to be Intel video driver:
    When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset".  From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
    When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
    In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
    Intel driver version: xf86-video-intel 2.20.1-3
    2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
    [ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    [ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
    [ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
    [ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
    [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
    [ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
    [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
    [ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
    [ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
    [ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
    [ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
    [ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
    [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
    [ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
    [ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
    [ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
    [ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
    [ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
    [ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
    [ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
    [ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
    [ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
    [ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
    [ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
    [ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
    [ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
    [ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
    [ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
    [ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
    [ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
    [ 0.000000] 0000000000 - 00cb000000 page 2M
    [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
    [ 0.000000] 0100000000 - 012f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
    [ 0.000000] RAMDISK: 37a46000 - 37d1b000
    [ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
    [ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
    [ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000c97be
    [ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
    [ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
    [ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
    [ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
    [ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
    [ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
    [ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
    [ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
    [ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
    [ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
    [ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
    [ 0.000000] 0: 0x000ca01e -> 0x000ca032
    [ 0.000000] 0: 0x000ca033 -> 0x000ca045
    [ 0.000000] 0: 0x000ca06b -> 0x000ca07f
    [ 0.000000] 0: 0x000ca080 -> 0x000ca081
    [ 0.000000] 0: 0x000ca083 -> 0x000ca084
    [ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
    [ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
    [ 0.000000] 0: 0x000ca90e -> 0x000cad1d
    [ 0.000000] 0: 0x000caff4 -> 0x000cb000
    [ 0.000000] 0: 0x00100000 -> 0x0012f200
    [ 0.000000] On node 0 totalpages: 1019347
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3016 pages used for memmap
    [ 0.000000] Normal zone: 190008 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
    [ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
    [ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
    [ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
    [ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
    [ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
    [ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
    [ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
    [ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
    [ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.208 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
    [ 0.000032] 00cbc00000 - 00cfe00000 page 2M
    [ 0.151118] Security Framework initialized
    [ 0.151124] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153673] Mount-cache hash table entries: 256
    [ 0.153885] Initializing cgroup subsys cpuacct
    [ 0.153888] Initializing cgroup subsys memory
    [ 0.153897] Initializing cgroup subsys devices
    [ 0.153899] Initializing cgroup subsys freezer
    [ 0.153901] Initializing cgroup subsys net_cls
    [ 0.153903] Initializing cgroup subsys blkio
    [ 0.153938] CPU: Physical Processor ID: 0
    [ 0.153940] CPU: Processor Core ID: 0
    [ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154505] mce: CPU supports 7 MCE banks
    [ 0.154520] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154528] using mwait in idle threads.
    [ 0.155909] ACPI: Core revision 20120320
    [ 0.173638] ftrace: allocating 17828 entries in 70 pages
    [ 0.187014] DMAR: Host address width 36
    [ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
    [ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
    [ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.187127] HPET id 0 under DRHD base 0xfed91000
    [ 0.187335] Enabled IRQ remapping in x2apic mode
    [ 0.187337] Enabling x2apic
    [ 0.187339] Enabled x2apic
    [ 0.187348] Switched APIC routing to cluster x2apic.
    [ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.325337] ... version: 3
    [ 0.325338] ... bit width: 48
    [ 0.325340] ... generic registers: 4
    [ 0.325342] ... value mask: 0000ffffffffffff
    [ 0.325343] ... max period: 000000007fffffff
    [ 0.325345] ... fixed-purpose events: 3
    [ 0.325347] ... event mask: 000000070000000f
    [ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.365318] Booting Node 0, Processors #1
    [ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391966] #2
    [ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418597] #3 Ok.
    [ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.432363] Brought up 4 CPUs
    [ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
    [ 0.436881] devtmpfs: initialized
    [ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
    [ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
    [ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
    [ 0.439159] NET: Registered protocol family 16
    [ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.439288] ACPI: bus type pci registered
    [ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488790] PCI: Using configuration type 1 for base access
    [ 0.489423] bio: create slab <bio-0> at 0
    [ 0.489488] ACPI: Added _OSI(Module Device)
    [ 0.489490] ACPI: Added _OSI(Processor Device)
    [ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600414] ACPI: Dynamic OEM Table Load:
    [ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601622] ACPI: Dynamic OEM Table Load:
    [ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.602615] ACPI: Dynamic OEM Table Load:
    [ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.603483] ACPI: Interpreter enabled
    [ 0.603488] ACPI: (supports S0 S3 S4 S5)
    [ 0.603522] ACPI: Using IOAPIC for interrupt routing
    [ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.709614] ACPI: No dock devices found.
    [ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
    [ 0.710683] PCI host bridge to bus 0000:00
    [ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
    [ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
    [ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
    [ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
    [ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
    [ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
    [ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
    [ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
    [ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
    [ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
    [ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
    [ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.475460] vgaarb: loaded
    [ 1.475461] vgaarb: bridge control possible 0000:00:02.0
    [ 1.475508] PCI: Using ACPI for IRQ routing
    [ 1.477328] PCI: pci_cache_line_size set to 64 bytes
    [ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
    [ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
    [ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
    [ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
    [ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
    [ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
    [ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
    [ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
    [ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
    [ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
    [ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
    [ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
    [ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
    [ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
    [ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
    [ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
    [ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
    [ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
    [ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
    [ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
    [ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
    [ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
    [ 1.477696] NetLabel: Initializing
    [ 1.477698] NetLabel: domain hash size = 128
    [ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.477713] NetLabel: unlabeled traffic allowed by default
    [ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.479760] Switching to clocksource hpet
    [ 1.485853] pnp: PnP ACPI init
    [ 1.485869] ACPI: bus type pnp registered
    [ 1.486219] pnp 00:00: [bus 00-3e]
    [ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
    [ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.533253] pnp 00:02: [io 0x0000-0x001f]
    [ 1.533255] pnp 00:02: [io 0x0081-0x0091]
    [ 1.533257] pnp 00:02: [io 0x0093-0x009f]
    [ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.533262] pnp 00:02: [dma 4]
    [ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.533487] pnp 00:05: [io 0x002e-0x002f]
    [ 1.533489] pnp 00:05: [io 0x004e-0x004f]
    [ 1.533491] pnp 00:05: [io 0x0061]
    [ 1.533493] pnp 00:05: [io 0x0063]
    [ 1.533495] pnp 00:05: [io 0x0065]
    [ 1.533497] pnp 00:05: [io 0x0067]
    [ 1.533498] pnp 00:05: [io 0x0070]
    [ 1.533500] pnp 00:05: [io 0x0080]
    [ 1.533502] pnp 00:05: [io 0x0092]
    [ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.533506] pnp 00:05: [io 0x0680-0x069f]
    [ 1.533508] pnp 00:05: [io 0x0200-0x020f]
    [ 1.533510] pnp 00:05: [io 0xffff]
    [ 1.533512] pnp 00:05: [io 0xffff]
    [ 1.533514] pnp 00:05: [io 0x0400-0x0453]
    [ 1.533518] pnp 00:05: [io 0x0458-0x047f]
    [ 1.533520] pnp 00:05: [io 0x0500-0x057f]
    [ 1.533522] pnp 00:05: [io 0x164e-0x164f]
    [ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 1.533579] system 00:05: [io 0xffff] has been reserved
    [ 1.533581] system 00:05: [io 0xffff] has been reserved
    [ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533606] pnp 00:06: [io 0x0070-0x0077]
    [ 1.533620] pnp 00:06: [irq 8]
    [ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.533685] pnp 00:07: [io 0x0454-0x0457]
    [ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.533764] pnp 00:08: [io 0x0010-0x001f]
    [ 1.533767] pnp 00:08: [io 0x0022-0x003f]
    [ 1.533769] pnp 00:08: [io 0x0044-0x005f]
    [ 1.533771] pnp 00:08: [io 0x0072-0x007f]
    [ 1.533773] pnp 00:08: [io 0x0080]
    [ 1.533774] pnp 00:08: [io 0x0084-0x0086]
    [ 1.533776] pnp 00:08: [io 0x0088]
    [ 1.533778] pnp 00:08: [io 0x008c-0x008e]
    [ 1.533780] pnp 00:08: [io 0x0090-0x009f]
    [ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
    [ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
    [ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
    [ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
    [ 1.533858] pnp 00:09: [irq 13]
    [ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.533945] pnp 00:0a: [irq 12]
    [ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.534008] pnp 00:0b: [io 0x0060]
    [ 1.534010] pnp 00:0b: [io 0x0064]
    [ 1.534017] pnp 00:0b: [irq 1]
    [ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.534823] pnp: PnP ACPI: found 15 devices
    [ 1.534824] ACPI: ACPI bus type pnp unregistered
    [ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
    [ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
    [ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 1.541791] NET: Registered protocol family 2
    [ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.544346] TCP: reno registered
    [ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544464] NET: Registered protocol family 1
    [ 1.544482] pci 0000:00:02.0: Boot video device
    [ 1.579823] PCI: CLS 64 bytes, default 64
    [ 1.579868] Unpacking initramfs...
    [ 1.651952] Freeing initrd memory: 2900k freed
    [ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
    [ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
    [ 1.652909] audit: initializing netlink socket (disabled)
    [ 1.652920] type=2000 audit(1343310419.543:1): initialized
    [ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.655215] VFS: Disk quotas dquot_6.5.2
    [ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.655387] msgmni has been set to 7683
    [ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.655616] io scheduler noop registered
    [ 1.655619] io scheduler deadline registered
    [ 1.655674] io scheduler cfq registered (default)
    [ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 1.656047] efifb: probing for efifb
    [ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 1.658532] efifb: scrolling: redraw
    [ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.661755] Console: switching to colour frame buffer device 128x48
    [ 1.664865] fb0: EFI VGA frame buffer device
    [ 1.664872] intel_idle: does not run on family 6 model 58
    [ 1.664905] GHES: HEST is not enabled!
    [ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.665554] Linux agpgart interface v0.103
    [ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.668518] mousedev: PS/2 mouse device common for all mice
    [ 1.668581] rtc_cmos 00:06: RTC can wake from S4
    [ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.668766] cpuidle: using governor ladder
    [ 1.668768] cpuidle: using governor menu
    [ 1.668897] TCP: cubic registered
    [ 1.669011] NET: Registered protocol family 10
    [ 1.669206] NET: Registered protocol family 17
    [ 1.669210] Registering the dns_resolver key type
    [ 1.669345] PM: Hibernation image not present or could not be loaded.
    [ 1.669352] registered taskstats version 1
    [ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
    [ 1.670074] Initializing network drop monitor service
    [ 1.671692] Freeing unused kernel memory: 740k freed
    [ 1.671810] Write protecting the kernel read-only data: 8192k
    [ 1.677537] Freeing unused kernel memory: 1588k freed
    [ 1.680114] Freeing unused kernel memory: 640k freed
    [ 1.688393] systemd-udevd[48]: starting version 186
    [ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.729878] usbcore: registered new interface driver usbfs
    [ 1.729905] usbcore: registered new interface driver hub
    [ 1.729967] usbcore: registered new device driver usb
    [ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.733581] SCSI subsystem initialized
    [ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
    [ 1.735298] libata version 3.00 loaded.
    [ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.743591] hub 1-0:1.0: USB hub found
    [ 1.743601] hub 1-0:1.0: 2 ports detected
    [ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
    [ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.756431] hub 2-0:1.0: USB hub found
    [ 1.756436] hub 2-0:1.0: 2 ports detected
    [ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
    [ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.757594] xHCI xhci_add_endpoint called for root hub
    [ 1.757598] xHCI xhci_check_bandwidth called for root hub
    [ 1.757646] hub 3-0:1.0: USB hub found
    [ 1.757657] hub 3-0:1.0: 4 ports detected
    [ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.757848] xHCI xhci_add_endpoint called for root hub
    [ 1.757851] xHCI xhci_check_bandwidth called for root hub
    [ 1.757894] hub 4-0:1.0: USB hub found
    [ 1.757905] hub 4-0:1.0: 4 ports detected
    [ 1.759643] ahci 0000:00:1f.2: version 3.0
    [ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.766833] scsi0 : ahci
    [ 1.766937] scsi1 : ahci
    [ 1.767022] scsi2 : ahci
    [ 1.767101] scsi3 : ahci
    [ 1.767184] scsi4 : ahci
    [ 1.767262] scsi5 : ahci
    [ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
    [ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
    [ 1.767505] ata3: DUMMY
    [ 1.767507] ata4: DUMMY
    [ 1.767508] ata5: DUMMY
    [ 1.767510] ata6: DUMMY
    [ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
    [ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
    [ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.087320] ata2.00: configured for UDMA/133
    [ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087920] ata1.00: configured for UDMA/133
    [ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
    [ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
    [ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.095497] sda: sda1 sda2
    [ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.096681] sdb: sdb1 sdb2 sdb3
    [ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.173153] hub 1-1:1.0: USB hub found
    [ 2.173332] hub 1-1:1.0: 6 ports detected
    [ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
    [ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.415509] systemd-udevd[144]: starting version 186
    [ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.465658] [drm] Initialized drm 1.1.0 20060810
    [ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.482290] ACPI: Lid Switch [LID]
    [ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.483119] ACPI: Power Button [PWRB]
    [ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.484548] ACPI: Sleep Button [SLPB]
    [ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 2.494298] ACPI: Requesting acpi_cpufreq
    [ 2.507995] i915 0000:00:02.0: setting latency timer to 64
    [ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
    [ 2.530047] ACPI: AC Adapter [AC0] (on-line)
    [ 2.532019] Monitor-Mwait will be used to enter C-1 state
    [ 2.532089] Monitor-Mwait will be used to enter C-2 state
    [ 2.532122] ACPI: acpi_idle registered with cpuidle
    [ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.561573] wmi: Mapper loaded
    [ 2.564667] iTCO_vendor_support: vendor-support=0
    [ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.587955] MXM: GUID detected in BIOS
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120

    Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
    I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M"  as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
    gnome-session[1269]: DEBUG(+): Enabling debugging
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
    gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1269]: DEBUG(+): fill: *** Adding required components
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1360
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1279
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    gnome-session[1269]: DEBUG(+): Got callback for signal 15
    gnome-session[1269]: DEBUG(+): GsmManager: Logout called
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1269]: DEBUG(+): Unreffing manager
    gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    PolicyKit daemon disconnected from the bus.
    We are no longer a registered authentication agent.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.

  • Problem with Cross Dissolve: The video cuts out during the transistion

    I'm encountering a problem with the Cross Dissolve transistion wherein during the period in which the transition should be happening the video instead drops out.  There's plenty of heads and tails available on both clips, but as soon as the timeline hits the start of the transition "from' clip cuts out, revealing the background or black if there's no background underneath and then the "go-to" clip cuts in at the end of the transition.
    Any help would be appreciated.

    I've been having this issue and it's driving me crazy.  It's random, that some cross dissolves work, and others don't.  Seems to affect AVCHD footage.  Adobe seems to be aware of the issue.
    The work around that I've seen posted by a forum user "Mitch W" is to apply a GPU accelerated effect to one of the clips in the pair.  The effect can be turned to "0" so as not to alter the video.  The act of doing this, makes premiere see the clip differently, and render the cross dissolve correctly.
    Fast Blur, set to "zero", seems to do the trick, and allows it to work with CUDA acceleration turned on.  I did notice that the work around was broken by changing the playback resolution in the viewer window.  In that situation, I had to apply the GPU effect to the other clip in the pair to make it work again.
    I don't know what will happen if I change my playback resolution again...

  • MacBook Pro display....problem with coloured pixels appearing

    I wonder if anyone can help - I have recently noticed on the left hand side of my display on my MacBook Pro that there is a large number of coloured pixels appearing more and more by the day. I have had the MacBook since Christmas, and it has been treated very well, i have never dropped it or damaged it in any way etc. At the moment the pixels aren't causing too much of a problem but i don't want it to get any worse. Has anyone had similar problems, and if so any suggestions?
    Many thanks in advance

    I haven't had any luck what so ever - only thing left for me to try is to completely wipe the system and re-install everything from scratch, if that doesn't work then i think i'll be contacting Apple..... which i should have done already to be honest, would have saved a lot of time and hassle! Only difference between mine and what your describing on your Mac is that the pixels are visible at all times on mine, no matter what apps i'm running etc, it is definately a problem with the screen.....i'll keep you updated with any developments

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Major problems with dropped frames while trying to capture

    Are there any settings where you can change the sensitivity of FCP HD or any settings that I am not aware of?
    Trying to capture from DigiBeta through a Sony J30 SDI, the whole thing wount go for a minute without intruption and dropped frames.
    I have tryed several tapes and finally I tried to copy through FireWire on to MiniDV on my XL1on a new unused DV-tape and then from there on capture into FCP but the problem remains.
    I have had some minor problems with this earlier but never as severe.
    I am capturing onto a Lacie BigDisc hooked up through Firewire 800 and there ia 170 GB free so thet should not be a problem.

    Andreas,
    The J30 specs state "All standard definition, half-inch Betacam format tapes, dating back some twenty years, can now easily be converted to a 25 Mbps DV signal and transferred to a compatible DV device via a single digital interface cable.", but you say you've tried that, and from the specs I'm assuming you'd need some conversion from the deck to go straight into FCP...like a Canopus or like you did dropping to DV tape.
    Have you tried a different FW port and/or cable?
    Other posts have mentioned changes of FW cables or ports as a solution, so I'm inclined to agree with David that you may require a FW800 card...we purchased one, when we bought our Big Disk Extreme. However, I don't capture to it, only archives and storage.
    Are you trying to capture internally to your system drive? (I'd guess not, as I've read some of your posts and would be surprised if you were)
    Any recent upgrades/updates or other changes in your config?
    K

  • Problem with iOS 7 - picture/video iMessages bug?

    I've been trying to send this in as feedback but it hasn't been going through. So I'll post it here. Maybe someone has an answer, or maybe it's a bug that Apple needs to look at.
    I think these are bugs. First of all, I love that we can now send up to 20 items that include both video and pictures.
    1) When sending images or videos via iMessage, it doesn't always work. It may work after I quit the photos and messages app a few times and then try to send, but if I send some and try to send some more right after (straight from the photos app), they don't go through. I get the message window open and I choose the recipient and I hit send, but nothing happens after that. The only way I've been able to get around it is to select the items and copy and paste them directly into the messages app. Please fix this, it would make things much more efficient.
    2) when there are multimedia messages, the messages app does not archive them in the conversation. Meaning, when you scroll up in a conversation, it continues to scroll up and the app loads every single message at once rather than giving you the option to pull down to load more. I've noticed that is still there when the messages are all text. But when there are pictures/videos involved, they don't get archived and this severely impacts loading time when opening up the messages. Sometimes they won't open at all and freeze because of all the memory it requires just to load everything. It happens on my end as well as with the person on the other end of the conversation - both of us are on iOS 7. I'm on an iPhone 4S and they have an iPhone 5. This has been happening since the upgrade to iOS 7.
    These are pretty big bugs and should be addressed ASAP. Thanks.

    I have had numerous problems with sending media in messages either from messages or from photos app as well.
    In general it seems this new os version was kind of rushed and is still very buggy throughout.  the 7.1 update should rectify the most common issues (i hope), but definitely try the feedback page again.

  • Problems with Metadata Set and video clip size... I think....

    Ok, I can't figure this one out... any help would be much appreciated.
    Background:
    I started server using the Video Production default customer profile. Then I created a few new metadata Sets including one called Finished Programs which is a media asset.
    Problem:
    When I upload a video clip and select the Finished Programs metadata set it always changes to the Media metadata set. Now this only happens when I have used MPEG Streamclip to take the video off of a DVD. If I upload a clip (mov) file that I used in Final Cut Pro it works fine.
    My settings in MPEG StreamClip are Apple DV/DVCPRO-NTSC 720x480 Interlaced Scaling and Reinterlaced Chroma.
    If I upload two clips at the same time and select Finished Programs metadata set, one that I used MPEG StreamClip and one that I digitized into FCP, it will place two clips in FCPserver, one with the Finished Programs and one with the Media Set.
    Any ideas on how to fix this????

    Could be. If it's not the metadata it must be something else. You would have to figure it out by trial and error. Maybe you should try giving it the highest priority and maybe turn off all automated scans and see if it works then. just to make sure that nothing intervenes with the process while it is going on and see if you can get it to run fully and see what the outcome is then.
    I have files over 1 GB that get attached to the right medadataset. I have failures on thumbnail creation to, but FCSvr then starts the same job over and over till it succeeds.
    I have never user MPEG Streamclip clips in FCSvr. Hopefully somebody else has and could share their experiences.

  • Since upgrade to FF13: having problems with flash content, especially videos when scrolling/multi tasking--freezing the video and sound for 1-2 sec. Any advice?

    At first, the same night I decided to update--things were fine but after using the browser hours later a second time: some flash scripts would simply not respond and freeze the tab the content is on or like in my question, constantly stutter. The problem for flash videos only seem to occur when I scroll onto links or when moving up/down a page. I encountered similar problem with FF7--like that time, I installed/uninstalled the flash player and even resetted firefox but to no avail--the problem persisted. It is also present while in safe mode. P.s. such problem is seemingly not present in other browsers which brought me to ask this question for assistance.

    I have the same issue. When I scroll past embedded videos, such as YouTube videos, they are torn or disrupted. The video may shrink in size when I scroll, etc. Issues only arise when scrolling past the video. When playing, no issues.
    I've tried the following that did not help:
    Safe mode
    Video driver up to date
    Flash completely up to date
    All plugins up to date.
    Only started happening when I updated to FF13.

  • Problems with ambient noise in video

    Hi,
    I've been having problems with this weird noise. See, I went to an event a few weeks ago and I took one clip of an actor and recorded it on my Panasonic DMC-TZ5 camera and transferred the footage to iMovie. It seemed fine to me but when it reaches 2 minutes there's this noise that blocks out the actor talking and then seems to fade more into the background at over 3 minutes and you can hear him again for the rest of the video. Is there any way I can eliminate this noise problem and if so, what application should I use? I tried to "normalize clip volume" when opening up iMovie but that didn't really do anything. I've heard of Soundbooth and other audio aps but I have never used them before so I have no clue where to start.
    I have uploaded the video on YouTube:
    <object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/7f5ewdeGwVo&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/7f5ewdeGwVo&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
    ...And nothing is more irritating to receive comments from others who complain that the sound is horrible. Any suggestions?
    Thanks in advance!

    You shouldn't have used 'Normalize' with video like this, which has a very low speech volume (..the mic seems to have been pointed towards the audience, not the actor).
    'Normalize' brings everything up to a constant, "solid" volume level. So if a voice is quiet, all the background hiss is brought up to a higher volume along with the quiet voice itself. Where a speaker pauses, and the voice is absent, the background hiss and noise may become even LOUDER to bring everything up to a standard high volume level!
    So if it's not too late - but I suspect it is! - you should really Undo the 'Normalize' setting ..but once things are Saved it's probably impossible to Undo that.
    The noise which starts at 2mins and runs to 3mins may be some artifact produced by the software which did the Normalization ..I don't know for sure. It's a weird "artificial" sound, rather similar to repeated "out-of-phase" abnormalities, and has many characteristics of having been created by sound-manipulation software.
    Because that extra noise is not completely solid, regular and constant (..like a solid constant hum, or a constant buzz..) it would be very difficult to remove it ..and removing it would remove virtually all of the actor's voice, because the weird noise is so much louder than the actor's voice.
    Programs like 'SoundSoap' (..click on that blue link for info..) promise to "remove noise" ..but they can only remove regular, constant, single-frequency noise well.
    Even 'SoundSoap Pro' wouldn't be able to remove that noise and leave the actor's voice behind, as so many of the frequencies (..highs and lows..) of that noise coincide with his, and others', speech frequencies.
    So you'd end up - if you did try removing the noise - with an extremely faint and "thin" sounding voice, which came and went, pretty much disappearing into some background hiss, and it would sound as if it were heard coming out of a water pipe.
    If you can go back to your original camcorder recording (..before 'Normalization'..) I suggest chopping out that one minute which has the "noisy" material (..if it really was there on the original). Then use the free 'Audacity' program..
    (..click on that pic, above, for a larger, clearer image..)
    ..to remove the background hiss and to boost mid-range sounds, then the actor's voice would come out much clearer, and you could also increase the overall volume, too - but without 'Normalizing' it until you'd first removed as much background hiss as possible, and had boosted his mid-range voice to greater prominence.

  • Nasty Safari 5.1 problem with drop-downs on Lion

    There appears to be a nasty bug in Safari on Lion related to certain types of drop-downs where clicking on the drop-down resets the entire page. I have already encountered it on several webpages. Here is a link to a webpage which shows this behavior.
    http://www.sonos.com/login/
    If you scroll to the bottom half and try to create a new account, you are unable to do so since the required Country value (via drop-down) cannot be set as it resets the page whenever you click or try to access it via keyboard. I guess it is good to keep Chrome and Firefox around for pages that Safari can't handle, but it would seem that this is something basic that Apple's automated test suites should have caught. Again, it does not happen with all drop-downs, only certain types.

    I had the same problem with a site I developed. I found out how to fix the problem here: http://stackoverflow.com/questions/7165086/clicking-safari-5-1-select-menu-refre shes-page
    It's a problem with using webfonts on select forms in the CSS. If you disable the webfont on select forms, the problem goes away. Hopefully, Apple fixes the problem soon since it's a major bug. It doesn't just reload the page but it logs you out if you're signed into the site.

Maybe you are looking for

  • HT201250 Transferring files from a Seagate external drive

    I have a seagate external backup drive (from my PC) There are some files I want to transfer to my new IMac, before using this external drive as the normal back-up, with Time Machine. But how do I first transfer over these data files?

  • Newbie - help with a SQL query for a bar chart  - Originally posted in APEX

    I originally posted this in the APEX forum but someone there suggested this is more of a SQL question.  Anyone out there who can provide some assistance? Hi, I'm a new user on APEX with no real SQL knowledge and I'm trying to build a dashboard with c

  • Facebook login

    Hi, Has anyone created an app for iOS and/or Android which successfully logs a user into Facebook and therefore has an access token? The AS3 FB api requires the FB popup to work which is fine but, it doesn't work on iOS during my tests. Any clues? Ca

  • Error in importing ST-A/PI

    Hi Guru,   I am getting error whileexecute  RTCCTOOL program in se38. Error: Table contents for table /SSF/PTAB from addon ST-A/PI are missing So i checked in SAINT queue ST - A/PI(latest 01L_ECC600) component OCS package is missing. so I load latest

  • Custom class template/wizard?

    I am using JDeveloper10gPreview. Coding standards require me to add substantial header comments including CVS fields to all of my classes. What I would like is to have JDeveloper fill in my new class with a standard template which I provide. Is there