Problem with dsc shared shared variables and error 1950679023

I'm having trouble using shared variables on my laptop PC (with Windows XP) using Labview 8.2 and DSC.   I've set up a simple project with one VI and one shared variable library.  In the VI, I have  a while loop that writes a number from a front panel control to the shared variable.  Another loop running in parallel reads the shared variable and displays to an indicator on the front panel.   The VI resides on my PC (no remote targets). This program executes just fine on my desk top PC; however I get the following error codes out of the shared variable nodes when I run the project and VI on my laptop for the write and read, respectively: ni_tagger_lv_Write 180121604 ni_tagger_lv_Read -1950679023 I've tried to manually deploy the shared variable library without success. The NI knowledge base  and other entries on this forum suggested that the Windows firewall should be disabled for a quick fix, however, the firewall was already disabled on my lap top. I didn't see any entries regarding the 180121604 error code.
Any suggestions would be appreciated.

The problem has mysteriously gone away.  For about the 10th time, I manually deployed the share variable library, and it started to work properly.

Similar Messages

  • Problem with Internet connection sharing between eMac and Powerbook G3

    Hi,
    I seem to be having a slight problem with internet connection sharing.
    My eMac is the main machine with the internet connection, and its running 10.4.6, the Powerbook G3 is running 10.2.8.
    I can connect them all up and get online with both, but I the problem I am having is when I turn the Firewall on on the eMac, the powerbook can't connect.
    Is there anyway I can keep the Firewall enabled and still use internet connection sharing?

    How do I know which ports the Powerbook is using?
    Also I had web sharing enabled on the eMac and it made no difference at all.
    Plus I don't know if this means anything to you, trying to decipher it myself, all I can make out myself on there is port 80.
    May 31 21:26:30 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
    May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49531
    May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49532
    May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49533
    May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49534
    May 31 21:26:42 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
    May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49535
    May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49536
    May 31 21:29:12 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1
    May 31 21:29:15 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • Problem with installing Photoshop elements 9 and adobe support advisor

    Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
    I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
    I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
    cpsid_82829s5 Missing installation file bootstrapper error occured
    with this code for a support from adobe 00-67325-032018052012
    I unistalled it and retried, but nothing.
    Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
    Thank you

    In the error message it doesn't tell me
    "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
    neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
    and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
    Messaggio originale----
    Da: [email protected]
    Data: 18/05/2012 22.20
    A: "Questionlady"<[email protected]>
    Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
    Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download &amp; Install FAQ - View the full discussion
    Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor?  If so can you please list each step and the result of those steps.  This will allow us to best advise you on your next steps.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Trial Download &amp; Install FAQ by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with use of COM+ Transaction and DB Transaction

    Problem with use of COM+ Transaction and DB Transaction
    We build a Web site that use sometime COM+ Transaction and sometime DB
    Transaction. If we use a COM+ Transaction and a few seconds later we try to use
    a Database Transaction (OracleConnection.BeginTransaction), we get the error
    Connection is already part of a local or a distributed transaction
    Of course the error does not produce everytime; it takes some try before we get
    the problem. And of course, if i use pooling=false on the connection string,
    the problem does not appear.
    i run the Web page
    and push the COM+ Transaction and DB Transaction one after the other for some
    times and the problem should appear.
    Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
    Database Server 9.2.0.4

    > Why in form builder can't I...
    Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
    Regards,
    Robin Zimmermann
    Forms Product Management

  • Problem with Xsan 2.1.1 and Mac Os server 10.5.6

    Hi,
    We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
    - We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
    - We have some problems, one of them is:
    odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
    This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
    - Another problem is with AFP service, suddenly the service stop, and the error is :
    mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
    -What of the meaning of (ipc/send) invalid port right??.
    And the last error is:
    -com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
    Need Help please!.

    My configuration:
    - Master Directory:
    Hardware Configuration:
    Model: Xserve
    Processor: 2x2,8 Ghz Quad-Core Intel Xeon
    Memory 8 Gb
    Disk: 70,04 Tb
    Software:
    Kernel Version: 9.6.0
    System Version: Mac OS X Server 10.5.6
    Xsan 2.1.1
    Services: AFP, DNS, Open Directory RADIUS
    Status: connected Users: 37
    This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Problems with creation of catalogue XPGrpwise and temporary

    Problems with creation of catalogue XPGrpwise and temporary files.
    I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
    Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
    Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

    Cvetaev,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

    Hello,
    we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
    Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
    We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
    - Thanks in advance for a tip !
    Best Regards,
    Ralf

    Hello Ameya and hello Shao,
    we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
    We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
    Thank you for your helping.
    Best Regards,
    Ralf

  • I have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending

    i have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
    Also the mail is acting very funny by not getting the rules work in a proper method.  Is ther a software to repair mail.

    i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check. 
    This problem just started for about 3 to 4 days now.  earlier it was working normally.

  • Problem with QT 7.1.5 and Sorensen codec?

    Has anyone noticed a compatibility problem with Sorensen video 3 codec and Quicktime 7.1.5? This problem did not seem to exist in prior versions (hence have been asking how to reinstall previous version but seems impossible). Some of the earlier postings discuss software that may be designed with Sorensen codec... these may be the ones not functioning properly now (video no longer works). Does this sounds plausible?
    Mac Mac OS X (10.4.8)
    Mac Mac OS X (10.4.8)
    Mac   Mac OS X (10.4.8)  

    That may be true, Jack, but Edmund said that the movie played in QuickTime Player. So his problem is most likely not a bug in QuickTime, though I can't say for certain.
    And as I said above, I have no problem playing Sorenson-encoded content on my Intel-based Mac with QuickTime 7.1.5, so more details about your content and setup (including any third-party codecs you may have installed) so that people can determine what the difference might be between the content that plays and the content that does not, or what's different in the systems, would be helpful, I'm sure.

  • I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE.   What should I do?

    I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
    What should I do?

    It's a scam. Have a look at this thread:
    https://discussions.apple.com/thread/6058094?tstart=0

Maybe you are looking for