Problem with dual audio jack after Bootcamp installation

Hello,
I have installed windows 8.1 via via Bootcamp on my macbook pro (Retina, 15 inch, medio 2014 with Yosemite 10.10.2).
Everything works fine except 1 thing.
Problem: The audio of my steelseries headphones are really crappy now. In windows and on Mac. It sounds really cold. This is only with my steelseriesv3 headphones with the new 3,5 mm dual jack. I tested it with an old headset with only audio and that works fine.
Before i installed windows via bootcamp it worked fine! I think the problem is that the new 3.5 audio port software on doesn't work with bootcamp???
Help is much appreciated.
Kind regards,
Tom

Can you uninstall the SV3 software and use the default BC drivers? I use the Optical (and power Amp) or USB DAC with headphones. I have an older Sennheiser headset.

Similar Messages

Problems with the audio jacks

I just received my factory refurb Thinkstation C30. I'm having problems with the integrated audio. I'm using Windows 8.1 Pro, installed myself over the factory Windows 7. It seems to be detecting the headphones incorrectly. The internal speaker never does anything, in any case. When the headphones are plugged into the front headphone jack, the Realtek control panel thinks its the pink jack, and the microphone tab appears. Plugged into the microphone jack, it thinks its the green and pink jack, and flickers rapidly between plugged in and not plugged in on the pink jack, microphone tab appears on and off.
Now for the back jack:
Blue identifies as blue, line in tab appears.
Green indentifies as both pink and blue (somehow), line in and microphone tab appear.
Pink idenfies as pink, with rapid on/off disconnecting. Microphone tab appears and disappears repeatedly.
The behavior seems to be the same with the generic Microsoft high definition audio driver, I installed the specific one off of the driver page to after I observed this behavior.
No sound ever happens from the headphones or internal speaker. In the sound control panel, my options are speakers on Realtek High Definition Audio, and AMD HDMI output (which I use for my speaker system). On my previous computer, plugging in headphones to the front panel would switch the output from HDMI to headphones automatically.
I do have 99 days left on the warranty if I need any parts for this, I'm wondering if the wiring in the USB/headphone jack assembly is whacky.

Silly question, but have you checked the orange connector that runs from the front panel to the motherboard to ensure it's plugged in correctly?
The fact that you're seeing ports flip back and forth between two different kind if inputs (or outputs) is odd. These ports do support jack sensing, but I would expect the flickering symptom you're describing. The fact that you're also not getting any output from the internal speaker in any condition is also concerning.
I'd inspect the cabling carefully to ensure everything is connected correctly and there is not apparent damage to the cables themselves. If everything looks good there, I'd probably go the warranty route. The problem certainly seems HW related from what you're describing.

My iphone 4G has problem with the audio jack flex cable.

Hello,
My iphone 4G has a problem and its already been out of warranty and i dont know which carrier it was purchased since its 2nd hand when i bought it.
This audio jack flex cable had a tear and does not function anymore including the volume buttons and the mute switch as well as the headphone jack. Kindly see link for sample picture of the part i am referring.
http://www.sulit.com.ph/index.php/view+classifieds/id/4143121/iPhone+4+headset+f lex+cable+original?referralKeywords=iphone+4G+headset+flex
I was wondering where i can buy that spare part here in Saudi Arabia particularly in Jubail and if also apple has a service center here...
Thanks and Best Regards,
Mothball

There are no legitimate sources for iPhone parts anywhere. Apple does not sell parts.

Is anyone having a problem with the audio jack?

My phone audio jack is not working. When connecting, the sound only comes out of phone not device cord is connected to like car stereo. Please help. I rebooted, checked settings to no luck.

I was very disappointed to discover that the link provided by Verizon Customer Support above does not take you directly to information on how to do a "master resetting your device" as prescribed. So I gave up on that option and I am glad I did.
Motorola's support recommends cleaning lint out of the headphone jack.
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/85247/p/30%2C6720%2C8417/kw/lint/session/L3RpbWUvMTM2Mjc3MTM1OS9zaWQvNUpPRS1Ga2w%3D
Turning it off and cleaning out the headphone jack worked for me.

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

Hi all,
I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
All help would be appreciated, looks like I'm going back to 10.5.1 though.

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

After upgrade to iTunes 11 "iTunes has detected a problem with your audio configuration"

After upgrading to iTunes 11 I have lost all sound on my PC running Windows XP. When I try to open iTunes I get the following message: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I have also lost sound when I attempt to listen to audio from a Website while in a browser session. I notice I have also lost the volume setting icon from the system tray in the lower right corner of the screen.
Please advise.

Something went wrong during the upgrade to iTunes 11. I have lost audio on my desktop PC running Windows XP. No sound in iTunes: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." No sound during browser sessions. The volume control icon disappeared from the system tray in the lower right corner of the screen.
It seems that an audio driver(s) were damaged or deleted. When I go into the Control Panel and check the reading for the audio hardware, the entry for the DVD/CD-ROM drive says:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click Troubleshoot to start the troubleshooter for this device."
Please advise.

ITunes has detected a problem with your audio configuration, audio/video

When i open iTunes i recieve a message saying "iTunes has detected a problem with your audio configuration, audion/video playback may no operate properly." iTunes opens fine after i click ok on the message. However when i push play to hear a song nothing happens, the time for the song remains at zero's.

This error can be caused by a bad installation of QuickTime. Remove iTunes and QuickTime, and reinstall iTunes (which will reinstall QuickTime). You can find the steps to remove and reinstall near the bottom of this article in the Apple knowledege base.

How Do I Add Partitions After Bootcamp Installation?

I want to have Windows 7 on my late 2013 Macbook Pro 13 to run applications not available on OSX. I need a small separate partition to store files for one of the applications that runs under Windows. On my older PC Windows machine I have C:\ that contains 98% of the data and a separate partition that acts as a separate drive (M:\) to store library files. This is a local copy of a server that I carry on my MBP, and doing this as I've done keeps the configuration files (that point to the server M:\) on my MBP consistent with desktop machines that actually point to a network shared drive (M:\). I just sync my small partition with the server every so often to keep my MBP functioning when I'm disconnected from the server. Now the problem. I can install Windows via bootcamp and that creates a C:\ (Windows partition) and gets Windows up and running. I have already learned the hard way about adjusting the partitions after bootcamp installation (I've rebuilt my Mac about 3 times ). I have been able to create the correct number of partitions by running the bootcamp assistant, creating the bootcamp partition, rebooting and <option> booting back to OSX, before installing Windows to add this 10GB partition (as FAT32) for my "M drive". Now after creating the "M drive" partition, I booted back into the Windows install disk (which has issues with USB drivers not functioning which I got past) and now I find out Windows will not install because it can't format the bootcamp partition since it will be a 5th primary partition and Windows 7 only supports 4 primary partitions on a drive. Is there a better way (without virtual OSs)?

Not possible. Boot Camp only works for two partitions - the OS X one and the Windows one. That's it. If you attempt to put a third partition on the drive, then Boot Camp is no longer able to manage the drive and you will lose the required boot loader for Windows. Getting things back to normal will then require repartitioning the drive back to one volume and reinstalling OS X from scratch.

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

My ipod touch is having problems with the headphone jack when I rotate a little song stops

my ipod touch is having problems with the headphone jack when I rotate a little song stops

Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Problem with dual audio jack after Bootcamp installation

Similar Messages

Maybe you are looking for