Problem with dual boot after upgrade to Mountain lion

Hello Every One,
I have a Macbook pro from 2009 which had dual boot option Windows 7 + Snow Leopard.
The windows 7 had 2 partitions (C; and D: an extended partition).
I upgraded the OS X to Mountain lion. after upgrade the system showed 3 options at boot time. Mac, Windows and a recovery partition.
when i boot to windows the D: drive is gone...I mean even though i can see the partition in partition software, windows 7 stopped showing D: in "My computer".
So i used testdisk utility to get the D: drive back and now when i boot to mountain Lion i am able to access both C:(BOOTCAMP) and D: drives.
but now the problem is during boot time my Mac Book pro doesn't show the windows option.
Can some suggest a means to boot into windows 7? Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it so that i can go back to my old configuration of 3  primary partitions (1 for windows 7 ...C: bootcamp + MountainLion) + 1 extended partition for D:
any help would be appreciated?
Regards

Ragu79 wrote:
Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it
Leave it: http://support.apple.com/kb/HT4718

Similar Messages

  • MacBook7,1 Will not boot after upgrading to mountain lion

    I have a MacBook7,1 with 2GB of memory and the NVIDIA GeForce 320M with 256 MB.  I just upgraded to Mountain Lion.  However, when it tries to boot it comes up, shows the apple and then restarts.  It does this continuously.  Every once in a while I can login but shortly there after it reboots.
    I booted from a DVD and ran the Disk Utility.  I am able to verify disk permissions and verify disk with no reported issues.
    From what I can tell my MacBook is a supported model but it sure does not seem like it.
    Any suggestions of anything else I could try and/or check would be greatly appreciated.

    I suggest:
    Install or Reinstall Lion/Mountain Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Ipad/Mac not working with Bose Soundlink after upgrade to Mountain Lion

    Since upgrading to Mountain Lion, I can not play through my Bose Soundlink from my Mac and iPad? It finds the device via Bluetooth, connects, but will not play.Anyone else?

    Try to reset the Soundlink. To do this just press the "mute" button for 10 seconds... when all indicators lights appears release the button and you are set.
    Just try to connecto again.
    Hope it works for you as it worked for me.
    Best,

  • Download, battery, and sleep problems on macbook pro with retina display after upgrading to Mountain lion

    After waiting a few days to download OS X Mountain lion, I finally installed it on my new MacBook with retina display a couple days ago. I love the interface and all the new features, but I've noticed some problems I really need to resolve. I'm constantly downloading large files and I noticed thhis change:
    Before, on Lion, I could download files from Safari or the Internet and the computer would sleep whenever it was set to on energy preferences and the download would resume. This would let the computer conserve energy so the download could progress further when on battery. Now, I noticed that my computer never goes to sleep! Its set to have the display sleep in 5 minutes and the computer in 15 on both battery and when plugged in, but it never does either. I don't know if it has to do with the fact that power nap is on even when using battery. So now the Mac is constantly on when downloading something and instead of downloading a one gigabyte file that would take up 15% of my battery, it takes up 60% since it never sleeps. When I tried downloading something and then manually putting the computer to sleep, the download was interrupted and it said Wi-Fi connection lost so I have to start the download over again.
    That's basically all three problems in one situation. I even put the brightness all the way on low so the screen is black when downloading, but it still uses up much more battery than before. Can someone help find a solution?

    Did you try turning off power nap?

  • I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    It would always be easier to fix the Mail problems.

  • After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

    after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Mail sorting problem after upgrading to Mountain Lion?

    I have a strange problem with Mail after upgrading to Mountain Lion.
    Before upgrading, when I tried to search my Mail Inbox for e-mails from a specific sender, the esearch results would be indexed by the name of the sender. For example: when I entered 'John Smith' in the search box in Mail, it would display a list of email from 'John Smith'
    Now after upgrading, the same query indexes the search results by the 'To' address i.e. my email address.For example: if my name is 'Steve Johnson', a search for 'John Smith' in the search box in Mail displays a list of email to 'Steve Johnson' and not from 'John Smith' which is how it used to display before.
    My emails are sorted by Date always, and I am using the default Mail view [not classic view]
    Can someone please help with a fix for this to help me get back to the original display I had while searching? Thanks in advance.

    I'm having the same problem.  It's incredibly annoying!!!  Did you find an answer?

  • Dashboard widget with streaming video breaks after upgrade to Mountain Lion

    Hi.  I recently upgraded from Snow Leopard to Mountain Lion.  Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera.  When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg". 
    After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge.  After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
    Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too.  (I did make sure that, where needed, the username/password for accessing the video are included in the URL.) 
    I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up.  So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
    Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
    Thanks,
    Chris

    Hi James
    I have exactly the same problem with the same "Loading clip" then blank.  I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done.  By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this.  I never had a streaming video while  I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion.  I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
    I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu".  Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
    I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
    Have you come any closer in your research?
    I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
    trelements

  • ITunes doesn't sync iCal with iPhone after upgraded to Mountain Lion

    iTunes doesn't sync iCal with iPhone after upgraded to Mountain Lion. I even tried to use Replace Information On This iPhone and it doesn't work. Any idea guys?

    I'm having the same problem. It's as if my iPhone and MacBook Pro now have two separate calendars.
    Basically, I have a MacBook Pro (Mountain Lion, 13", late 2011) that I sync via USB with an iPhone 4S (iOS 5.1.1). Before upgrading to Mountain Lion, all of my iCal events would sync flawlessly. But none of the events I've created in iCal (Calendars) since upgrading have synced to the iPhone. Likewise, no new events that I create on the iPhone Calendar will sync to iCal. Also, changes to an existing event (even one created before upgrading to Mountain Lion) don't get synced either.
    Everything else seems to be syncing just fine though (music, apps, contacts, etc).

  • Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

    Hi !
    I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
    Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
    I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
    Anybody got a solution to this other than using the iMac for offline use only ?

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem?

    After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is going on.

    http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
    See if you have supported applications > http://www.roaringapps.com

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Google Talk not working with Messages after upgrade to Mountain Lion

    After upgrading to Mountain Lion, I'm no longer able to use Google Talk with the new Messages App.  It worked fine on iChat, but now I cannot enable the account.  When I try to check the enable box, it immediately unchecks itself and nothing happens.  Any suggestions?

    Welcome to Apple Communities
    Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.imessage.bag.plist and com.apple.imservice.iMessage.plist

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • How to correct battery drainage problem after upgrade to mountain lion

    My macbook pro battery drains very fast, just used 3% as I am entering this question. This rapid battery drain started after upgrade to mountain lion. Any advice?

    This appears to be a problem that's affecting a number of users and has been widely reported. My guess is you're going to have to wait till they do a software update.
    There's general tips for conserving battery power on my page here that might ameliorate matters in the meantime:
    http://applehelpwriter.wordpress.com/2012/04/23/how-to-make-your-battery-power-l ast-a-bit-longer/
    Be sure to report the problem to Apple directly here:
    http://www.apple.com/feedback/
    - every extra complaint helps to add a little urgency.
    (ToU Disclaimer: this link to my site contains other links which promote my services as a technical writer)
    Message was edited by: softwater

Maybe you are looking for

  • Infoobject change for extracting texts data.

    Hi BW guys, Here is my requirement. I have one info object 'salesmen', which is already used in some other ODS & Cube's. Now I want to extract texts data for the object 'salesmen', for that I will need to change my infoobject (changes are : adding cr

  • New Safari on IOS8 on iPad air.

    Hi. I just upgraded to IOS8 on my iPad air yesterday and wish I never bothered because the new Safari is ridiculously annoying to use. The address bar disappears when u scroll down and reappears when u scroll up. This is largely pointless to begin wi

  • Questions on SortedMap & regards on implementing compareTo.

    the problem: im trying to run search algorithms on TreeMaps which contain string keys and values. these algorithms generally require the known first and last key. the interface Sorted Map, implemented by TreeMap, gives the methods firstKey() and last

  • Problem with TFRM table active indicator in pricing routine RV80HGEN

    Hi experts, I have created few custom routines in VOFM tcode, and trasported to Q system. In DEV in program RV61ANNN and in VOFM tcode, i can see the new includes and new routines. But when i check in Q system in VOFM  tcode the new routines are not

  • Itunes store comes up in foreign language!!

    Although my itunes is set to english the store comes up in what i think is spanish. So I can't use it. Any suggestions?