Problem with Dual-SIM

Hi. I have such a problem, that I'm using a dual SIM card in my Nokia E7, but I don't see that they're calling my business or my private number. Is there an app that would show me the number, where to they call?

lauriii89 wrote:
Yes. One SIM card, two numbers on it.
Which network are you on ?

Similar Messages

Problem with dual sim adapter! HELP!!!

Hi everyone,
I have dual sim adapter witch require sim cutting. So on my nokia 2600 it runs fine but on my nokia 6500 slide, it just wont work!
Version of software on nokia 6500 slide is:v 06.60; 07-03-08; RM-240c) Nokia. The 6500 slide is runing fine on SIMORE website with this adapter.
Any clue???
Thanks!

Hi extreme1984
I have recently updated my N82 to v30.0.019 and have had no issues using a pair of 2G SIMs in a 13th Generation STK menu dual SIM holder, so I don't think latest Nokia softwares can be blamed for this unfortunately.
Happy to have helped forum in a small way with a Support Ratio = 37.0

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

"There is a problem with the SIM card in your iPhone"

I'm getting this error when I try to activate my new iPhone 4 through iTunes:
"*There is a problem with the SIM card in your iPhone.*
To activate your iPhone with this account, you will need a new, unactivated SIM card. Please use the SIM card that was provided with your new iPhone. If you are using the new SIM card, and are unable to complete activation, you can go to an Apple Retail Store or an AT&T company owned retail store to request an unactivated SIM. If you would prefer to have a replacement SIM card sent to you via overnight mail, please call us at 1-800-MY-APPLE. We apologize for the inconvenience this has caused."
Now I've already been to AT&T and nothing they could do with the account settings would work, in fact they had never seen the issue before. They gave me a new SIM card and that did nothing as well. Finally they tried out a different SIM tray, and that still didn't work. I have a Genius Bar appointment at the Apple Store tomorrow, but I was wondering if anyone else has this problem. Do you think that the SIM reader inside the iPhone 4 is broken?

I solved a problem I had with activating my iPhone although the error message was different from yours.
I got the message "There is something wrong with your iPhone and it cannot be activated, please bring it to your nearest Apple service".
Via a Chinese forum I found out its the SIM card witch is the problem. If the serial number of the SIM has a "letter" in it it won't work. If only numbers it will work.
I now tried it with 2 SIM cards with letters and got the message over and over again. Than tried with my only numbers SIM card and it activated instantly.

Sim problems- I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

arun kumar chenna123 wrote:
i have updated my iphone to ios4.1. after installation, it is showing as"The SIM card inserted in this iPhone does not appear to be supported. only compatible sim cards from a supported carrier may be used to activate iphone. Please insert the sim card that came with your iphone...."
how to solve this problem. I don't have any sim cards that came with iphone.
Please help out to solve this problem.
It sounds like the phone was hacked or jailbroken, and updating it locked it to the original carrier. As it is not possible to update to any version other than the current one (5.1) the fact that you updated to 4.1 pretty much confirms the phone was hacked. There is no solution that you can get in an Apple forum.

What does it mean when it says there is a problem with the sim card?

What does it mean when it says there is a problem with the sim card?

Exactly that, there is a problem with the sim card.
The sim card is the little chip that links your iPad to the cellular providers network to get internet anywhere.
It may have moved in the tray and lost contact, it may have an actual issue, or it may be deactivated by your cellular service provider.
Contact them to have them look at it or your service and see if there is anything wrong with it.

Problem with dual screen (24" imac 2006 ver)

hi
i've got a 24" intel imac (2006 ver) and i've connected it using apple's mini-dvi => vga adapter to my 2nd 22" lcd monitor, a samsung 2232GW, which is set to 1680 x 1050.
however, the samsung lcd displays (when i'm using as dual screen) is quite blur and double imaged. quality is readable but very irritating. i'm also using the same monitor for my ps3 (uses the DVI side) and have no problem with any visual aspect. I've tried playing around with the settings like resolution and calibration and tuning but didn't help at all.
anyone might have any ideas and enlighten me on this issue?
thanks
Message was edited by: Treon

Did you get any resolution to your question? I have the Samsung monitor almost like yours, and I posted two seconds ago. I think I have a similar problem. I had been using my Samsung with my PC, and just switched to Mac. I loved my Samsung, but now ,for the first time using as a second. Hooked up to mini dvi to dvi, and reported a glow, or tinge coming around any window that I may place on the Samsung.Also, when Ilook at the background around the window I can see that the resolution is not perfect and is breaking up a little. Did you try VGA? and did it help? Curious to know

Player compatibility problem with dual layer media

I've created a dual layer DVD and there is a problem with compatibility from player to player.
It plays fine in one of my DVD players but will not load in the other.
The duplicators tested my master on 2 players and it loaded on both, but would lock up if a chapter was selected from the submenu.
It has 4 tracks of content. 3 menus, and a bunch of chapter markers. The original build had stories (replaced with standard chapter markers) but I removed them hoping it would solve the problem.
The imported video tracks were created with Compressor. MPEG-2 2 pass VBR max bit rate 7.5. AC3 audio tracks. 7.7 GB on disc.
I'm already way over my deadline and ahve no idea what to do next other than maybe recompress so the disc is not so close to being maxed out.

Thats just how compatible that media is... +R DL (double layer) & -R DL are not that compatible. Recordable media is less compatible that replicated discs but double and dual layer media can be 50% compatible at best (depending on your target market...)
Good quality media, Verbatim +R DL for example burnt at slow speeds helps improve things,
-Jake

Problem with dual graphic

I own HP PAVILION G6 1202TX model.It is built with dual graphics INTEL and RADEON. INTEL - INTEL(R) HD Graphics 3000 and
AMD- RADEON(TM) HD 6470M.earlier accidently i lost my windows and its all drivers but my main issue is with ts graphics.If i install AMD drivers a notification bar shows problem with INTEL graphics and if i install INSTALL it shows issue with RADEON.After installing the driver every time i restart my pc AMD shows a dialogue box and if i have installed AMD ,INTEL keeps poping up notification bar in right lower corner of pc it something related to INTEL SYSTEM TRAY GRAPHICS.
Now i have installed INTEL graphics driver i and every time ii restart my pc it shows a dialogue box
this dialogue box appers every time i start my pc
PLEASE HELP ME
Hope for a freequent action
THNK YOU.
This question was solved.
View Solution.

Hi ashwani26596,
Let's start by using the HP Support Assistant to check for any updates and drivers to see if that resolves the issue. If that doesn't work then go your Control Panel and then Programs and Features and uninstall the Catalyst Control Center. Then try installing both the Intel High-Definition Audio Driver and the AMD High-Definition Audio Driver.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

N80 problems with 02 sim

When my N80 has an 02 pay-as-you-go sim card in, I get a "General: System Error" every time I try to read an SMS message. This effectively hangs the phone and I have to remove the battery to stop the beeping and carry on the error causes.
If I put in my Telstra sim card, then there is no problem (even with the same messages).
I used the Nokia Software updater to confirm that the firmware was current (it is) but tried reinstalling it all anyway, which made no difference.
Any clues as to what I can do to correct this problem? My N80 was purchased in Singapore, and is not under contract to any UK service provider.

Is it something to do with the sim having to be registered for the 3g network? I'm sure somebody had the same problem when they first got an N80 as the sim supplied was not 3G
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

HT1937 iphone model A1387 problem with "invalid sim" card. How to reset

After about three months of trouble free use suddenly I have lost connection with cell phone carrier with a "invalid sim". I now understand its my model phone, A1387, so now how to fix this problem?

No not yet, its my understanding that this problem has been documented and their is fix out there somewhere. I bought this phone from Apple while on leave. Now I live in Kyrgyzstan, cell phone cariers are rare and to trouble shoot by purchasing another sim card, may work again but also may not work. So Iam seeking help with a more permanate fix/upgrade. I heard this is a problem with this model or this OS.

Problem with Micro Sim release Mechanism. Please help?

I am using Ipad2 and tried to change the Micro SIM using the Pins to release it. The Micro Sim holder is not coming out as usual and there seems to be an internal problem with the release mechanism. For now, I can't access my Micro Sim. Please help?

Tried as suggested but it does not work. Something seems wrong in the release mechanism. Thanks anyway. Is there any other option? If I bring it the Apple Service Center, will they be able to work it out?

Problems with Dual 2.0 G5

Hi,
I'm having a couple problems with my Dual 2.0 Power Mac G5 (early 2005) and wondering how I can fix them and if they might be related.
Problem 1:
My 20" Apple Cinema Display keeps going black. I'll come back to my computer after it has been on, thinking the display has gone to sleep. But when I move the mouse, nothing happens. The computer is set to never sleep, only the display. So then I shut the computer down by holding the power button for 5 seconds, and try to turn it back on after a minute. I can hear it starting up, but again, the screen stays black.
This has happened a few times over the past 6 months, but turning it off and on a couple times would eventually get the display to work again. This time, however, I'm having no such luck. Is my graphics card dying?
Problem 2:
Again this has happened a few times over the past 6 months, but now it has happened twice in a row. After not using the computer for a while, I will notice the fans starting to run really loudly. At first, I just thought it got hot and the computer was trying to cool down. But they would run really loudly for a pretty long time, so I would check the computer to find it has locked up.
So now I can't get my computer to turn on and function properly. I'm not sure what to do or if these two problems are related. A couple days ago I installed a new SATA hard drive in the second hard drive bay. The installation went fine and I have already transferred some files over to the new drive, but I've got to wonder if the drive might have something to do with it. The problems have occurred before I installed the drive, but now they are occurring more frequently.
Any help is greatly appreciated.
Thanks,
David

I've got a dual 1.8 I bought in Dec. 2005. It's always been a might twitchy, but lately I get Kernel Panics regularly. Sometimes the HD is damaged and I have to run Disk Warrior to get it back.
I have had some serious issues with the HD in this machine. I might zero it out and start over.... or just buy a new one.
Can anyone tell me what the panic log means? I'll add memory... sero out or replace the drive... whatever it takes. I just want to find a clear path to freedom. Any help would be appreciated.
Description: Panic (system crashes) log
Size: 6.14 KB
Last Modified: 4/9/07 7:25 PM
Location: /Library/Logs/panic.log
Recent Contents: ...
Proceeding back via exception chain:
Exception state (sv=0x505F1280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x4F81E000)
PC=0x9003C0EC; MSR=0x0000F030; DAR=0xE0006000; DSISR=0x42000000; LR=0x00002FEC; R1=0xBFFFFD80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x505F1280)
PC=0x000A4BEC; MSR=0x00001030; DAR=0x0000FF1C; DSISR=0x0A000000; LR=0x0002D120; R1=0x3717BB70; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0023A820 0x000A4498 0x000E5654 0x000E46DC 0x00231ED4 0x000F9360
0x000EC65C 0x000E8E20 0x000EC6A8 0x002AB7F8 0x000ABB30 0xFFFFFFFF
backtrace terminated - frame not mapped or invalid: 0xBFFFFD80
Exception state (sv=0x4F81E000)
PC=0x9003C0EC; MSR=0x0000F030; DAR=0xE0006000; DSISR=0x42000000; LR=0x00002FEC; R1=0xBFFFFD80; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC

A problem with the sim card

I appeared an update of ios 6.0 (IOS) gave OK and then once completed almost said failed and was restored completely normal good but after turning on the phone and restore it and he said OK and then di to follow a step says that does not read the sim and not let me do anything

I solved a problem I had with activating my iPhone although the error message was different from yours.
I got the message "There is something wrong with your iPhone and it cannot be activated, please bring it to your nearest Apple service".
Via a Chinese forum I found out its the SIM card witch is the problem. If the serial number of the SIM has a "letter" in it it won't work. If only numbers it will work.
I now tried it with 2 SIM cards with letters and got the message over and over again. Than tried with my only numbers SIM card and it activated instantly.

I have a problem with my SIM card

I bought my iPhone 4S last year directly from Apple. I worked beautifully until I changed providers, from Orange to Jazztel. My phone is blocked. I cannot use it with their SIM card, even though I bought the phone and paid €599.00 to Apple.
I have now been 13 days without a line, and Apple do not seem to be able to resolve this problem.
Short of going to court, are there any senior management contract that may help me solve this problem?

What did AppleCare say when you contacted them? Ask them to escalate the issue if you're not satisfied or call and ask to talk to someone in customer relations.
You do not specify what country you are in or were, exactly, you bought the phone. In some locations, and from some retailers (CarPhoneWarehouse in the UK is a prime example) iPhones will lock to the first carrier used to activate them.
Why don't you just contact orange and ask about having it unlocked instead of beating your head against a wall?

Problem with Dual-SIM

Similar Messages

Maybe you are looking for