Problem with Dunning wizard

After the excution of Dunning wizard, I get the following error :
18/03/2009 19:06:51: Could not commit transaction '' (DWZ2)
Now,
I don't see the register dunning transaction, but all the business partner has been signed has dunned.
I need know to understand what is my problem and this error, and to restore back the situation to the time before the error.
Giuseppe

HI,
The error message is typically caused by approval procedures. Could you
please ask the customer to try the following:
1. Check the approval templates.
2. Log on with the approver user (designed approver in the template).
3. Go to the Approval Templates Setup window, Terms tab.
4. If the radio button 'when the following applies' is checked, please
check if any box was checked on the 'Choose' column and if the Ratio
'Undefined type' is selected. If so, either select a ratio and define
a value, or uncheck the box.
5. Check the last line in the Terms tab ('Undefined type') and make sure
it is not checked.
6. Click on Update.
If the above does not solve the issue, then this may be related to Note
1258519 which is an application error fixed in 2007A, P44.
Also there is a workaround on the Note 1258519.
Regards
Vikas
SAP Business One Forums Team

Similar Messages

PI 7.11 problem with configuration wizard

hello guys,
during the configuration wizard to use PI functionalty of my PI system I receive a massage regarding the not correct registration of my system into SLD
ABAP technical system 'SID on HOSTNAME\SID' not found . But it's correctly in the abap technical systems.
What could be wrong? Is it related to the fact I performed a NAMED INSTANCE installation with MSSQL ?
anyone of us had the same problem?

Hello Bruno,
Please follow the MANUAL wizard from the link below:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/a0/40084136b5f423e10000000a155106/frameset.htm
Perhaps the automatic wizard could lead to a lot of problems.
It should solve the issue with the wizard.
Regards,
Caio Cagnani

Error with Dunning Wizards

Hi
I am using SAP B1 8.8 PL15,
When i use Dunning Wizards, system is not allow me future DueDate and
ERROR: Future Posting Date is not allowed [Message 60014-19]
for postding date am usning past date range and
am reqd future due date
any one else have this error?
is it BUG?
Nilesh Shah

Hi,
Dunning is used to create and send letters to customers that have not paid their debts within a given time range and to remind them of their overdue payments.
In this case the due date selected would be past overdue.
I tested the dunning wizard and in Step 4, the posting date and the due date cannot be after the dunning date appearing in the step 2.
Kind Regards,
Jitin
SAP Business One Forum Team

Please Help... Problems with recovery wizard

Hello,
I got a Toshiba A205-S5804, as long as it was used I'd erase all from the hard disk with the recovery disk. The problem know is when I try to run the recovery disk it gives me a message:
ERROR 08-064B-000
PARTITION CREATION FAILED
And then the computer shut down.
Please help me

A "Partition creation error" sounds like a hard drive problem. See if you can partition and format the hard drive with a different program or operating system. If you can't, it is a hard drive issue. If you can partition the hard drive with some other software, then it maybe a problem with the Recovery CDs. You can order new Recovery CDs at Toshiba's InTouch Center at 800-457-7777.

Problem with payment wizard

Hi Experts,
a customer of ours encountered a strange problem while using the payment wizard.
Testrun was successfull, the real run threw an error with the following message:
If you restart SAP and start the run again, it works perfectly fine.
Anyone an idea what it could be?
Thanks and kind regards
Teresa

I dont have the possibility to get it in English, but I can try to translate.
"number of occurrence of node "MsgId" is outside range "1" to "1"
PmtInf - Number of occurrence is outside range "1" to "infinity"
XML schema error: element "GrpHdr" in namespace 'urn:iso:std:iso:20022:tech:xsd:pain.001.002.03' got an invalid inferior element 'CreDtTm' in namespace (see above).
Expected list of possible elements: 'MsgId' in namespace (same as above).
XML schema error: content of element 'CstmrCdtTrfInitn' in namespace (same) incomplete. Expected list of possible elements: 'PmtInf' in namespace (same).
Internal Plug-In-Error
Error of calling up the Plug-In..'

Problem with Dunning letter

I have printed the Dunning letter to be sent to the customer and when i looked at the signature part there are two signatures are appearing where only one signature is supposed to be there.
could please help how to resolve this like where i need to check for the possibilities?
Thanks in Advance for the help.

Hi,
You need to check the program which is generating dunning notice in your case. You can reach your dunning form in following way:
1. T-Code FBMP
2. Select your dunning procedure
3. Click on Dunning texts
4. enter your co.code & select account type
5. You will find forms corresponding your dunning levels
6. Select the level you get two signatures then
click Goto (on top) > Display Form
7. now click on utilities > Form info
This will bring out detailed info about your form.
You can review the footer of this with your ABAPer and thus would be able to find the root cause of the issue.
Please let me know if this helps
Warm Regards
Harpreet

Problem with Wlan Wizard

I have an N85. Sometimes when I want to connect to Wlan network through Wlan Wizard , my device becomes restarted. Please help me

Hi,Try this
Wireless LAN connection problem can be cause by a firmware failure and can be easily be fix by restoring, updating the phones firmware again. But after doing any firmware repair and the problem still exists the problem may certainly lies on the hardware components failures.Try updating your phone
PRANAVCR7

Migration from Access to Oracle 10g (Problem with migration wizard)

Hi
I have an access database which I want to migrate to Oracle DB.
I have created 2 connections.
1. Access connection with the source database
2. Oracle connection.
I have associated the oracle connection to the repository.
When I go through 'MIGRATION WIZARD' process. I am not able to view the source database file while capturing. Tried it several times.
Need a help in this
Regards,
Arjun
Edited by: 919650 on Mar 9, 2012 2:47 AM

Arjun,
you cannot do an online migration with MS Access as you can do with other foreign datasources. You can only do an offline migration.
The first step that you need to do is to call the Microsoft Access Exporter. Click on Tools - Migration - Microsoft Access Exporter and chose the exporter of the MS Access version that you are using.
The exporter creates an xml file for you. After the exporter has finished you can do the migration, click on Tools - Migration - Migrate, but in Step 4 please select "Offline", and then you can select the xml file that the exporter has created. The following steps in the Migration assistant are then doing the migration for you.
You might also want to read the chapter "Before Migrating From Microsoft Access" in the online help of SQL Developer.
Regards
Wolfgang

Problems with setup wizard

Hey I just got a blackberry curve 8520 and when i try to set up my email address the only option that comes up is the "I want to use a work email account with a Blackberry Enterprise Server" and I need the first option due to the fact that i dont have the enterprise password. What should I do?

Hi paulina01,
I would advise contacting your wireless provider to verify that you have the correct data services for personal email.
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Dunning wizard doesn't work for the patners who have already dunned

Hello everyone,
I have a problem with dunning wizard, I have 2 dunning level :
Level 1, 1 day
Level 2, 2 days
I launch once dunning yesterday, all parteners who have invoices no paid pass to level1
Today, I lauche again the wizard, there are no result at the end the wizard, it means it can not pass to level2
there are on option "block dunning" for any partner
Anyone has a solution?
thx in advence

anyone can help me?

Problem with the importing wizard

Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the help

Can you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Problem with a BAPI collecting dunning levels

Hello all experts,
I am having a problem with BAPI DebtorCreditAccount (called from a VB program), collecting dunning levels.
The BAPIs is called like follows (only the essential code is shown):
The first function (GetCustomerCurrentBalance) works fine but the second (GetCustomerHighestDunningLevel) doesnt work.
    Public Function GetCustomerCurrentBalance(ByVal strCustomerID As String) As Decimal
        Dim objARAccount, objReturn, objActualBalance As Object
        Try
            objARAccount = Me.p_sapBapi.GetSAPObject("ARAccount", "1000", Me.ConvertCustomerID(strCustomerID))
            objARAccount.GetCurrentBalance(Return:=objReturn, ActualBalance:=objActualBalance)
            Return CType(objActualBalance.Value("TOTAL_BAL"), Decimal)
        Catch ex As Exception
            Return 0
        Finally
            objARAccount = Nothing : objReturn = Nothing : objActualBalance = Nothing
        End Try
    End Function
    Public Function GetCustomerHighestDunningLevel(ByVal strCustomerID As String) As Integer
        Dim objDebtorCreditAccount, objReturn, objHighestDunningLevelD As Object
        Dim objTEST1 As Object
        Try
            objDebtorCreditAccount = Me.p_sapBapi.GetSAPObject("DebtorCreditAccount", Me.ConvertCustomerID(strCustomerID), "0001")
            objDebtorCreditAccount.GetHighestDunningLevel(Return:=objReturn, HighestDunningLevelD:=objHighestDunningLevelD)
            Return CType(objHighestDunningLevelD.Value("DUNN_LEVEL"), Integer)
        Catch ex As Exception
            Return 0
        Finally
            objDebtorCreditAccount = Nothing : objReturn = Nothing : objHighestDunningLevelD = Nothing
        End Try
    End Function
The error message I get is:
Message: The runtime object of type DebtorCreditAccount with the persistent key 00000480060001 could not be created in the Business Object Repository.
Message-Nr: 826
Workarea: OL
R/3 error message: Object does not exist
Please give me some input on how to proceed!
Best Regards,
Niklas

Thanks Vijaya for your fast reply. The parameters that I am giving as input are however correct.
I have investigated the problem a bit further and tried some other calls.
If I just chose to create an object of the type DebtorCreditAccount (without submitting any parameters) and then use the same method call as before (se code in topic above) I get the following error: Mandatory parameter HIGHESTDUNNINGLEVELA missing. This must mean that it knows that something is missing.
objDebtorCreditAccount = Me.p_sapBapi.GetSAPObject("DebtorCreditAccount")
objDebtorCreditAccount.GetHighestDunningLevel(Return:=objReturn, HighestDunningLevelD:=objHighestDunningLevelD)
If if add the mandatory parameter HIGHESTDUNNINGLEVELA I get the error message "The persistent key for an business object instance of type DebtorCreditAccount has not been set. Cannot invoke method GETHIGHESTDUNNINGLEVEL. This I interpret as the object has not been right instantiated. This brings me back to square one.
objDebtorCreditAccount = Me.p_sapBapi.GetSAPObject("DebtorCreditAccount")
objDebtorCreditAccount.GetHighestDunningLevel(HIGHESTDUNNINGLEVELA:="0", Return:=objReturn, HighestDunningLevelD:=objHighestDunningLevelD)
Grateful for a response!
Regards,
Niklas

Dunning as PDF - Problem with output

Hi experts,
I have a problem with the dunning as email.
Everything works fine here with the dífferent threads (BTE 1040) - but the output is not in PDF-format. When I look at SOST, the attachment ist in *.EXT format...
Does anybody know what's the problem?
Thanks
Michael
Additional information: The file is an .pdf file - when I save it as .pdf, I can open it normally...

Hi,
In transaction SCOT, check the format for Sapscript/Smartforms. Double click on the node for email. e.g .SMTP. In the pop-up window there is a section for supported address types. Beside 'Internet', click on the button SET. In here select PDF as the output format for Sapscript/Smartforms and for ABAP lists.
Also in SCOT, check Setttings -> Device types for Format Conversion, ensure that PDF is the target format.
Regards,
Aidan

Problem removing old versions with customization wizard 8

I'm trying to deploy Acrobat Reader 8 to our XP Professional desktops via Active Directory software installation (Windows Server 2003 domain)
I have obtained the MSI release of Reader 8, customised it using Adobe Customization Wizard 8, and deployed it through AD as per the Adobe documentation. This works as expected for new machines without a previous release of Reader installed.
However for desktops that have Reader 6 or 7 installed, we end up with two versions installed side by side (visible in Add/Remove Programs). Reader 8 works fine at this point. Removing the older version causes the PDF file association that Reader 8 created to be broken, also the Internet Explorer browser plugin is broken. Reader 8 has to be reinstalled manually to fix this issue.
I have read that Reader automatically removes old versions of itself when you install a new version. Additionally, when customising the MSI, "Remove previous version of Reader" is greyed out. However it appears that the installer is not removing old versions.
Any ideas as to a solution?
Thanks a lot
Tom Fanning

I have the same problem and i have wasted like 50 hours on this s**t. I'm trying to deploy reader 8 on our 1800 XP workstations with SMS 2003.
The cutomization tool is totally useless. The only way i have came up with is to create a script wich checks if earlier versions of Adobe reader is installed by looking if the installation folders exists (for example c:\Program Files\Adobe\Acrobat 7.0\Reader ).
If the installation folders exists, the script would run the uninstallatoin string of the reader using its Windows installer product code, like this:
MsiExec.exe /x /qn {AC76BA86-7AD7-1035-7B44-A70000000000}
Now, the problem with the script is that we have several versions of reader 6 and 7 including 3 different languages. The script or the .BAT file would be quite complicated and the testing is allmost impossible.
I think that it would be much more easier to create a script that deletes all the shotcuts for Adobe reader and then installs a Freeware product for openig PDF files.
http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer
In my opinion, adobe products are a nightmare for IT admins and their support system is even worse than Microsofts.

Problem with Dunning wizard

Similar Messages

Maybe you are looking for