Problem with DynamicLink on cs6

I can't import video frames to layers, because it says that the DynamicLink isn't available. What can I do to make it work?

Please refer to http://forums.adobe.com/message/4444125 and http://forums.adobe.com/message/4402388.

Similar Messages

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

Problems with Adobe Speedgrade CS6 in Windows 7

I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
Windows 7 Ultimate SP1
Gateway FX 6800-01e
2.67 GHz i7 Quad-core processor
16.0 GB RAM
750GB primary hard drive (Seagate ST3750528AS)
2 - 2TB secondary hotswap drives
NVidia Quadro 4000 w 2GB dedicated RAM
2 Acer 231SHL HD monitors running in extended dual screen mode
Adobe Speedgrade 6.0.4x25
It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference. I have also tried uninstalling it and reinstalling it. I have also applied the latest update through the program interface. The other components of the suite I have installed are:
Premiere Pro CS6
After Effect CS6
Acrobat XI
Audition
Bridge
Photoshop (32-bit and 64-bit versions)
Lightroom 4.3
Prelude
The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped. Thanks in advance!
-Carl Hayes
"What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

Hi,
Have you get rid of the problem ?
I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
It's on windows 7 pro.
Thanks in advance

I have a problem with my photoshop CS6 retina display

I have a problem with my photoshop CS6 retina display. my photoshop doesn't support retina on my Macbook pro 15 retina. the version I have in my laptop is 13.0v. I was trying to update to 13.1 from my photoshop through > help > update but this option is off. it is appear gray color. I couldn't click on it. please help me.

Mac Perpetual CS6 current version is 13.0.6 the subscription version is version 13.1.2. How are you trying to update to 13.1.?? do you have a Creative Cloud Subscription?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Problem with starting Photoshop CS6 in Windows 8.1 after PC weak up from sleep

Hello,
I have continuously problems with Photoshop CS6. After weak up my PC from sleep mode Photoshop take ages to start. It take about 15 minutes than it starts. After restart it's just fine and Photoshop start up in few seconds. Before with Windows 8 was everything ok.
I tried reinstall whole Creative Suite, delete all files from system folders of Photoshop, no plugin used, all is up to date!
CS used: Creative Suite Design Standard CS6, Czech language (Photoshop 13.01 64 bit and 32 bit - both do the same)
System: PC, Windows 8.1 64bit Czech language, system and program discs: Intel and Corsair SSD, CPU Intel i7 4Ghz, 24GB RAM, Graphic - Nvidia Geforce 580 GTX (graphic drivers up to date).
Adobe need to fix that.
Thanks for help, it's really annoying problem.

Martycz wrote:
Adobe need to fix that.
Along with all the other problems in this world that are all Adobe's fault.
OK so this all went pear shaped after updating Windows to 8.1? Have a look at Preferences > Performance and see if Graphics acceleration is still checked. Or it might even be greyed out. Apparently the 8.1 installer arbitarily installs a generic graphics card driver, so you might find that your drive is not so up to date as it used to be.
You know that you need to update it from the card maker's site?

Problems with running Photoshop CS6 and Bridge with Lightroom 4 also on the same PC

I was running Photoshop and Bridge, then purchased Lightroom 4. Before installingt 4 I had no problems with Bridge, but since installing 4 all of the photo's that were held in bridge are now gone, but they are in Lightroom. With Lightroom, you are able to edit photos out of Lightroom and into Photoshop when necessary, save and close and it automatically changed the Lightroom picture.
I have two PC's, one has Bridge on it (this one) and the other without, but both have both editing prgrams installed. On the other PC I can switch between Lightroom and Photoshop with no problems, but when I try to switch with this PC, the one with Bridge installed, it will open Photoshop, but the photo will not transfer. If I close Photoshop program and go back to Lightroom, it will tell me that the picture could not be transfered to Photoshop because it would not launch. If I close that message window, it will then launch Photoshop and the picture transferes over allowing me to edit and save as normal.
My question is; does anyone know if Lightroom and Bridge should run side by side, or should I delete Bridge from this PC and see what happens. Bridge is just a holder and organizer of photos, wherease Lightroom does the same, but also has post editing capabilities. The two programs seem redundant, but if your running Photoshop, it's hard to get files out of Lightroom. It seems that you need to open Lightroom first, then you can view and chose a photo to work on, then move it back and forth between the two programs. This seems to make Bridge redundant.
Thanks for any help or suggestions.
he_b_gb1947

Hi, Yes, but that actually wasn't the problem. I start out in Lightroom,
then move to Photoshop if I have something that can't be fixed in
Lightroom. The problem was that when I tried to edit, out of Lightroom and
into Photoshop, I was getting an error message that Lightroom couldn't
prepare files for transfer because Photoshop wouldn't open. But, it had
opened, the picture just wouldn't transfer. If I closed Photoshop,
Lightroom would try again and it would open and transfer the second time. I
ended up going to the Adobe help, chat line, and they looked into my PC and
located the problem, it's now working fine. Thanks to everyone for your
inputs. Most appreciated.
Gary

Problems with printing in CS6 64bit

When we open a Design in Photoshop CS6 (64bit mode) the design is not printable.
When you open the Printer properties an error message say that no Printer exists.
When you create a new design, and open then your old design you can sometimes print it.
Photosoh was reinstall and Printer Driver too (changed with some Version) no Change!
In Photoshop 32bit it works.
Have someon same Problems?

Give us more details, please.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win), [OK, I know you're on Windows since you refer to a 32-bit version of CS6]
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6 or 13.0.1) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, version of your printer driver, type of connection to your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Problem with CC to CS6

I created a project in Premiere Pro CS6. Today when it suddenly crashed, I could only re-open it in Premiere Pro CC. Every time I try and open with CS6, it tells me that the project has been damaged and cannot be opened. Could someone please tell me what the problem might be.

I found the following work-around: not perfect, but quite good.
Premiere 6.5 projects can be directly opened in CS6 or earlier just by changing the extension from .ppj to .prproj
Make a copy of the original .prproj file and name it Name_audio-only.prproj
Export sequence(s) as FCP XML from CC - multiple sequences can be selected OR select Project Panel to export entire project (Attention: Most video - even intrinsic ones like motion, opacity etc. and audio effects are not correctly translated! Check beforehand that all 3rd party plugins are installed in all versions of PPro!)
Save a copy of the project as Name_video-only.prproj and delete all audio tracks or audio clips from all sequences that contain video effects
Close PPro CC project
If the PPro CC project file is compressed, add .gz as extension and extract with 7zip
To disable compression in CC:Ctrl + F12 to open Console, switch to Debug Database View: BE.CompressProject> false
Open in Notepad++
Edit version number change (4th line) from 26 to 23 or 24 and open the project in PPro CS5.0.3 or PPro 5.5.2 and save it.
If there should be a color picker dialogue box while opening click Cancel (as this is most probably for Adjustment Layer which are not supported in CS5.5)
If PPro CS5.5 shows a Log of non-translated effects etc., copy and paste them into a text file with the project name for later reference.
PPro Version numbers:
23>CS5
24>CS5.5
25>CS6
26>CC
27>CC 2014
A simple change to 23 and opening it directly in Adobe Premiere Pro CS6 does not work! (Liegt wahrscheinlich an den Audiotracks, da Projekte mit Sequenzen, die nur Video enthalten, teilw. geöffnet werden können.)
It is possible to open a PPro CS6 project directly in CS5.5 by editing the version number from 25 to 24.
Open this project Name_video-only.prproj in Adobe Premiere Pro CS6 and convert it to CS6 project - now you have all the sequences with the supported video effects
Import FCP XML project file(s) into PPro CS6 and copy the audio tracks from the corresponding sequences (or vice versa: copy video tracks so they align synchronously again)
Gotcha’s:Through Edits, Adjustment Layers, Time Remapping, 3rd party filters, plugins, transitions may not be correctly translated!
PRPROJ File Associations
After installing an update to PPro, Windows will change the default program to the latest program version, e.g. CC. If you want to revert those to CS6, you cannot simply do it with Rightclick>Open with>C hange default program..
There is a way to change the setting in the Windows Registry:
Open regedit.exe as Administrtor
HKEY_CLASSES_ROOT/Adobe.Premiere.Pro.Project. > shell/open/command and change the path in “” to the correct program version.
You can also do a search in the section of HKEY_CLASSES_ROOT/Adobe.Premiere.(with various endings following the word "Premiere") and change all remaining instances.

Problems with distortion / pixelation CS6

Hi,
When I look at my video as I am editing it in Premiere Pro CS6 the picture looks great....very clear with no distortions. However, when I encode it in Adobe Media Encoder and then I play the finished video I see ssome distortion / pixelation in the background....Are there any settings that I can tweak to help get rid of the distoration? As I said.....in Premiere the distoration is not there, but after it is encoded in Adobe Media Encoder the distortion is in the finished/encoded video.....HELP PLEASE.

Thank you for the video....it gave me some things to think about about, but I have not solved the problem....my cuurent export settings are:
Format: FLV
Preset: Web 512x288
The finished video will be on a website. Any thoughts??

I have a problem with Adobe Photoshop CS6

I have a MacBook Pro 13" Dual-Core i5 2.5GHz/4GB /Intel HD 4000/SD I don't know why the scrubby zoom does't work for me.
Please help me..

It's supported when the GPU reports to Photoshop it can provide what Photoshop needs. Adobe lists those they have tested toward the bottom of this page:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
Near as I can tell, yours is listed.
If you are not able to enable the Use Graphics Processor setting, it's likely because either something's installed that interferes with the driver on your system - or the driver is faulty and needs to be updated. Mac users must get driver updates through Apple with OS updates.
To diagnose the issue further will require a Mac expert, which I am not.
-Noel

Problems with trial PS CS6 questions

In the trial version of PS CS6 I am getting errors when I select some tools or some effects. The program wants to shut down. What's happening and can it be fixed?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
However, the detials you provided are not sufficient enough for us to help you. Please read through this article and provide any additional relevant details including:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Printing problem with cc and cs6 with epson 7890

Hi everyone,
I am having a serious printing problem. I use CC (14.2.1) and CS 6 (13.0.6) on Mavericks 10.9.1 on an iMac. If I try to make a print on a 24" roll I get an error message: cupsRasterinterpretPDD has an error = page header unsupported values. If I print A2 or A3 sheets everything works fine.
I contacted Epson because I thought it was a printer problem, but they insist it is a photoshop problem. I updated to the latest printerdriver.
Does anyone have any ideas or even better a solution?

I feel your pain, but I don't know the solution, sorry. Our Mac guru who primarily serves designers is not upgrading any of his clients to Mavericks so far, due to printing (and other) issues. Se we're still on 10.8.4 here.
This might help: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967522
Or this: https://discussions.apple.com/thread/5546441
If those don't help, you might want to post your issue in the Apple Support Communities: https://discussions.apple.com/index.jspa
Good luck. :+)

Hello, we have a Problem with Adobe Photoshop CS6 and VM Ware.

Hello,
our Problem is:
A user uses VM Ware and the OS: WIN7
She made Screenshots in the VM Ware, the Screenshots she want to edit in Photoshop, but then Photoshop lag a lot.
The PC has 16 GB RAM, but uses just 9 GB ( 6 GB for the VM(she needs 6 GB , because a Program needs so much GB) and 3 for the normal PC).
Does anybody know an answer?

Turn off hardware acceleration in the PS prefs.
Mylenium

TOC or Menu problem with an EPUB CS6

Hello !
I have created a Book with multiple documents (*.indd).
Now when I export it to EPUB, and I open the file in Firefox (for example) in the left menu, I see the names of my documents (*.indd) instead of the titles, subtiltles etc...
How can I change this ?
Thank You

The left menu is called a Navigational TOC. To create a navigational TOC, you need to create a Table of Contents Style in InDesign. Do this by choosing Layout > Table of Contents Style. Use the TOC features and add paragraph styles to includes the headings or subheads you want in your navigational TOC. Then when you export the EPUB, select the name of the Table of Contents Style:

Problem with In Design CS6 Unexpected Quit and will not re start up, even after computer restart?

In Design CS6 Quit Unexpectedly and will not start back up, even after restarting computer. Tried to do a CS6 re-install. It finished and said ready to use, but still getting same Unexpected Quit and In Design will not work. Did not "Un-install CS6 first" Should I try installing CS6 again, un-installing version on computer first?

Hi Ivesprepress,
You might also try resetting your user preferences
You can delete the replaceable InDesign SaveData and InDesign Defaults files by holding down the following keys while InDesign is launching:
Windows: Shift+Ctrl+Alt
Mac OS: Shift+Control+Option+Command
Taken from: InDesign preferences and support file locations
- Dave

Problem with DynamicLink on cs6

Similar Messages

Maybe you are looking for