Problem with E71 detecting photos in Memory card

I have a Nokia E71.
I tried encrypting the memory card first. After this i could not access my data on the memory card hence I decided to decrypt it.
Everything on the memory card seems fine except that the Gallery is not recognising the photos on my memory card. I can access the data through the File Manager.
Have tried switching d phone On and Off several times but to no avail.
Even removed the memory card and re-inserted it but no use.
The songs are detected by the music player.
When i scan my memory of the card it shows used space but 0 bytes for Images, 0 for Sound files and 0 for Video files.
Also my Phone has slowed down since then. Some of the images are also corrupted
Please help me ASAP!!!

Try to transfer your data to computer , recovering as much as possible , and then format the card

Similar Messages

  • Problem with new Scandisk 32GB CompactFlash Memory Card Extreme Pro 600x UDM

    Canon provides an XF utility to read, combine, and export video files from the card to the computer. The utility works well with every CF card that I have used until I bought a new Scandisk CF card. The utility can access the XF files on the card but it cannot play them. Actually it does start to play then stops and starts. When I try to export a file to the computer it will not finish with even the smallest file. There is no problem with any of my other CF cards. Has anyone else seen this problem?

    Now that I am in the correct forum the question is for those users who use the Canon XF Utility - is there any reason for it to act differently with one type of CF card as opposed to another? I have sort of solved the problem by using the PP Media Browser instead of the Canon Utility to read my CF cards.

  • Problem with 5300 and 2 GB memory card

    Hi,
    I just bought 5300 phone and 2 gb micro sd card, sandisk.
    And I am now storing music files to the card via usb connection and phone is shown to pc as a disk.
    It transfers 990 MB of music and after that is says card is full.
    From gallery it shows memory card as 2 gb card, and full status is 990 MB, free fine also. I tried transfer also with music manager same result. Like the 1 gb is the limit somehow.
    Is it ?
    /Harri

    13-Jun-200709:39 PM
    stgotio wrote:
    I also have problems with my new Kingston 2GB micro SD card on Nokia 5300. However quite different. I uploaded appr. 1.5 GB music and it worked fine. Then I switched the phone off. When I tried to switch it on again the screen started to flash and after 15 sec the phone switched off itself. It took for a while till I discovered that the problem somehow relates to the memory card. When it was removed the phone worked fine (no flashing, no switch off). I reformatted the memory card and everything worked fine till the next switch off. Then it started again. I updated the software (V 04.70), but it didn't help. I'm not 100% sure but it seems to me that the problem relates to the music player which tries to update the music library after the switch off and somehow it freezes the phone.
    Any idea how to solve this?
    In short because I don't have a 5300 - No ...
    However - something to try is to see if your card works without problems on a PC (via USB card reader) or laptop (some have memory card slots built in)
    Lastly on Nokia's 5300 webpage it states that they only recommend using authorised cards ... it might be worth seeing if you experience the same issue with Nokia's own 2Gb microSD card ?
    Regards,
    Edward

  • During import Aperature wont show all photos on memory card.

    During import Aperature wont show all photos on memory card. Typically loads the previews of the first 15 photos only showing "loading assets" and spinning wheel. Running Aperature 3.2.3 on MBP 2.16 core duo 2gb ram importing from a SD card reader contining approx 300 nikon d3100 NEF files. Created a new user account and new library with same results.

    Could be the card.  Transfer the files to your HD using Finder, and then import into Aperture.  All OK?
    Then reformat your card in your camera, and see if the problem recurs.  Also: does it happen with other cards?  Does it happen with the card in the camera (instead of in your card reader)?

  • How do you download photos ffom memory card tocomputer

    How do you download photos ffom memory card tocomputer. When I insert the card the only destination for the photos is Snapfish. Does not  go directly to my photo files as my previous HP 209 photosmart...thanks, Mark

    An easy solution would be to install Picasa 3. When you load the program, you can import.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

    Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

    W dniu 2013-06-16 15:36, dj_paige pisze:
    >
    Yes, I did it long ago.

  • Problem with corrupted iPhone photo albums

    I have a problem with my iPhone "Photos" app.
    When I open it is see hundreds of "ghost" albums in the Albums tab.
    I have tried to turn off syncing photos in iTunes and then turn it back on again, and so deleting all albums and photos and then re-applying- but no luck.  I also tried to sync with an empty folder on my Mac instead of the iPhoto library, but this still does not delete the albums.
    Anyone know how to nuke the photos on an iPhone and start from scratch WITHOUT having to restore the iPhone to its factory state?

    Here is what I see when I go to delete some of the rogue albums:
    I could keep doing this but there are probably 300-400 of them!!!!!

  • How to not delete photos on memory card once uploaded to iphoto??

    Hello!
    I have checked the box that said DELETE PHOTOS ON MEMORY CARD ONCE UPLOADED ON IPHOTO, and I did check "don't ask me again"... and now I do not know how to undo this mistake I made.
    Please help?
    Thanks!!
    -Emilie

    What OS and version of iPhoto  --  prior to Lion
    A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN

  • Problems with Photoshop CS6 Recognizing Multiple Graphics Cards

    Hi,
    I have a quad monitor setup with two graphics cards with the latest drivers downloaded today and installed directly off of the manufacturer's websites:
    1) AMD Radeon R9 200 Series 4GB GDDR5
    2) NVIDIA GeForce GTX 460 1GB GDDR5
    I have Photoshop CS6 64-bit (along with the rest of the Adobe Design and Web Premium) installed on my computer - which I uninstalled and reinstalled today also - and it's claiming that it has detected an error with my display driver. The Graphics Processor Settings box in Preferences is greyed out, and I've used the shift+ctrl+alt to reset preferences and check again to no avail. I've also set both of my graphics cards to turn on OpenGL Triple Buffering and to let the 3D application decide the image settings. Here's my system info, where you can see that the GPU sniffer crashed and that no video card is detected:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: AMD CPU Family:15, Model:2, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 4018 MHz
    Built-in memory: 16349 MB
    Free memory: 12120 MB
    Memory available to Photoshop: 14671 MB
    Memory used by Photoshop: 70 %
    Image tile size: 132K
    Image cache levels: 4
    Photoshop crashed on 12/5/2014 at 9:37:01 PM (GetImageViewResourceSharingGLContext)
    The GPU Sniffer crashed on 12/5/2014 at 10:47:20 PM
    Display: 4
    Display Bounds:=  top: 0, left: 1920, bottom: 1080, right: 3840
    Display: 3
    Display Bounds:=  top: -1080, left: 0, bottom: 0, right: 1920
    Display: 2
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Display: 1
    Display Bounds:=  top: -1080, left: 1920, bottom: 0, right: 3840
    No video card detected
    Serial number: 90148051671449209572
    Application folder: E:\Program Files (x86)\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\April\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 111.7G, 8.82G free
    Required Plug-ins folder: E:\Program Files (x86)\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: E:\Program Files (x86)\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.8428  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Camera Raw 7.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE
    Please help!

    Yes Adobe states if you use more then one GPU adapter they should be the same else Photoshop may have problems. Photoshop CC and CC 2014 GPU FAQ
    Are you using more than one video card?
    Multiple video adapters can cause problems with GPU-accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model.
    Otherwise, crashes and other problems can occur in Photoshop.
    Note: Using more than one video adapter does not enhance Photoshop's performance.

  • How to upload photos from memory card to computer on new Officejet 8500A Plus?

    I recently replaced an older HP psc 2410 photosmart printer with a new Officejet Pro 8500A Plus printer.  The installation went fine without error messages, and it prints, scans and copies just fine.  When I insert a memory card into the slot, the printer itself recognizes the files and displays them on the LCD screen and offers to print them.  BUT ... what I want to do is upload the files to my PC (running Windows XP), and I can't figure out how to do it!  There is no HP program that pops up and offers to transfer the photos like with my old printer.   I was also expecting to see the card slots shown as a removeable drive like I did with my old printer, but I don't see them.  Also, my Photoshop Elements program doesn't recognize the card slots either.
    Then it dawned on me that my computer doesn't "see" the card slots because it's not connected directly to the printer!  I set this up as a wireless printer and I am totally new to this, so pardon if this is a dumb question... but is there no way to transfer files from the card slot to the PC in a wireless setup??  I'm totally confused...
    This question was solved.
    View Solution.

    Hi,
    If your printer is connected thru network or wireless network, you have to access it thru the IP address.
    Find out the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.
    Open Windows explorer and type \\xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the ip address of the printer.
    You'll see the memory card slot there.
    You can do a "map network drive" to it if you want your printer card slot to be listed there permanently.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Transfer photos to memory card

    I have a 2GB memory card. I am trying to load it with 144 MB of photos. It accepted about half of the photos and now, after exporting the photos to my desktop and trying to copy them onto the memory card, I get the message: "cannot be copied because there is not enough free space."
    Clearly it is lying, but I don't know what to do about it.

    Welcome to the Apple Discussions. Memory cards are formatted for PCs, FAT 32, and as such do not allow many files in its root directory. The simple solution is to add all photos you want to a folder and put that folder on the memory card.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Problem with application and storage and memory.

    I NEED HELP!! I am trying to add more application s to my Blackberry Curve 8330. My problem is I don't have enough storage to even add a couple of application s and their updates to my phone. I have an 8GB media card with like 7.3GB of free space. Also, I only have 3.7MB of free space on my device. One of my questions is, How do you add things to your memory card instead of your device memory? Second thing is, if anyone decides to respond to this discussion, please use simple steps. Thanks soooo much.
    ~Robin

    Hello!
    There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory
    Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
    Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
    SD/Media Card Memory -- This is what it says...your SD card, for you to store files, media, pictures, etc. It cannot be used as the target for installing applications (only App Memory can be used for that). It can be as large as your BB OS can support...see this KB:
    http://www.blackberry.com/btsc/KB05461
    On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
    http://www.blackberry.com/btsc/KB15345
    http://www.blackberry.com/btsc/KB14320
    http://www.blackberry.com/btsc/KB14213
    Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
    Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
    Best!
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • E72 - Cant view photos on memory card

    Hey,
    Any photos or backgrounds I put on my memory card are not viewable in the image gallery and If I move a image from the phone memory to my memory card in the image gallery It just disappears. I tested the memory card in another phone and it works fine. What am I doing wrong?

    I face a similar problem. Heres the history.
    There was a virus on my cell phone, because of which a folder by the name 'RECYCLER' appeared on my phone. I did a hard reset (Format). Since then, I believe the virus is gone (since I cant see the Recycler folder any more), but my images cant be viewed in the Gallery. If I use my phone in mass storage mode, I can see the pictures that I had taken. But they dont appear in my Gallery. Any ideas how to solve this problem.
    Also, if I take my phone to a Nokia Service Center, can they format and reinstall the entire software, so that the phone is just like it was on the day I purchased it?

  • Viewing photos from memory card (n97)

    i have photos on my memory card but when i put it in my fone my photos dnt show up any ideas?
    my tones on the memory card show up

    You can not in iPhoto - it is NOT a photo viewer - it is a database program and ONLY works with photos that have been imported into it
    Use a photo viewing program to view the photos where ever they are - preview should work if your camera mounts to the desktop - if it does not mount then you will have to import them either to iPhoto or to the desktop (use image capture) to view them at all
    LN

  • X38 Platinum: Problem with CPU detection

    Hi everybody,
    I've got a little problem with my newly acquired x38/platinum...
    I'm currently assembling a new PC on my own... So far all the component have been plugged-in EXCEPT the memory modules (I haven't purchased them yet).
    Despite this complete lack of memory, I try to test the correct boot-up of the system.
    And then the following problem occurs: the "lcd post" display hang on "CPU" (before rebooting indefinitely)... Not "DRAM" as expected...
    The CPU is a Core 2 Quad, and is correctly powered with a 8-pin/12v connector. The CPU-Fan is powered from the correct on-board pins (cpufan). The speakers are plugged, but no specific "beep" are emitted.
    One possible mistake I've made: the CPU-Fan is not fully plugged with the 4 "screws": i only (and hardly) manage to clip 2 of them, I'm afraid of breaking the board if y try too hard with the two others.
    Could this problem be caused by the absence of DRAM? Or more likely by the the fact that the Fan is not fully clipped? By the way, is that normal that the CPU Fan is so Hard to plug correctly?
    Any comments or idea would be greatly appreciated
    Thanks (and sorry for the approximate english)
    MH.

    Quote from: Jack the Newbie on 23-January-08, 22:03:59
    mhz42, please provide full system specs.  Otherwise it is very hard to help you with your problem.  What brand and type of memory are you using?  What other components are part of your system configuration?
    The mb is a x38 platinum 1333. The proc is a quad core qx8650, 1333fsb. The hd (western digital caviar) and optical drive (lg h66n) are both on sata and plugged. The memory used is 2go Kingston ddr3 1375mhz... (plugged in DIMM 1/2).
    Anyway, I frankly doubt that the problem could come from anywhere else than the cpu (considering the post message)...
    Quote from: Jack the Newbie on 23-January-08, 22:03:59
    What PSU are you using?
    A seasonic M12-500w... brand new...
    Quote from: Jack the Newbie on 23-January-08, 22:03:59
    Did you properly plug in ALL power connectors?
    The powering should be ok... (the MB, the proc, the cpufan and the graphic card are plugged) The processor seems to be correctly powered, if it was not the case, the post process wouldn't even start (tested)...
    Quote from: Aaron Yuri
    You could just buy a cheap Pentium 4 and flash it with that.
    That's an idea. Or i could directly ship the mb back to msi and thell them to do it themself... After all the spec says cleary "quad core compatible"...
    So?
    Just to be sure: the "since 1.1" from the compatibility table from MSI, refeers to the bios version right? Not a sort of MB revision or something?

Maybe you are looking for

  • Update a block without navigating to it.

    I have a table with several integers in it and a Form that reads the table. The Form has to translate the integers into things the user wants to see, so I hide the actual database field, do a translation into the user friendly string and display it i

  • How to handle the Inputstream as "html"

    Sorry for my poor English. PC A get a inputstream from URL and transfer it to PC B. How to display the inputstream as a "html" on PC B. R there some classes to deal with the problem?

  • How do I get Favorites to appear like in SDN?

    How do I get the Favorites link to appear as it is displayed in the SDN Home page (instead of a square box that need a right mouse click, which is the portal default)? Thanks Patrick

  • Podcasts with passwords

    Hi, I've seen a couple of other posts on here asking about issues with iTunes not actually storing the password for a protected podcast even when you select the checkbox to keep it. Neither question was really answered, so I was wondering if anyone e

  • Will Civilization IV for MAC play on version OS 10.7.2?

    Just bought an Intell Mac with 2.7 GHz and 4GB.  Want to get Sid Meier's Civilization especially with the expansion pack of Colonization. As of November 11' Civ V is out but there are some complaints of compatibility, plus it doesn't come with Coloni