Problem with E72 incoming calls ID

hello,
i have a problem with my E72 for some days now. it doesn't show the names of the contacts that are dialing me (almost all incoming calls) even when i have them stored in my phone memory or sim card.
please advise

I guess they only show as numbers? It's most likely duplicated contacts or you have most of your numbers stored on both phone memory and sim card memory and the phone is set to show both.
So what happens is that if one number is saved twice under e.g 'Dad' and 'John' the phone doesn't know what name to show and shows only number.
Make sure your phone is set to only show contacts from phone memory first and then go through your contact list and make sure there are no duplicates.
If your phone is just showing the word "calling" or something like that, you will have to call your operator, but I guess that's not in this case as you wrote almost all incoming calls.

Similar Messages

Problems with 3-way calls, merge calls?

loving my iPhone but having problems with 3-way calling and merging calls. tried to be on one call and have another person call (from a regular land line) and it went straight to voicemail for them. in addition, was on a regular call and tried to add another call AND tried to merge, none of the above has worked. i know this is included in the calling plan.
anyone having similar problems?

Per the Apple note in the link below, "Note: While iPhone is actively transferring data over EDGE—downloading a webpage, for example—you may not be able to receive calls. Incoming calls may go to voicemail."
Perhaps this is what was happening.
http://docs.info.apple.com/article.html?artnum=305711

I have to select bluetooth audio with every incoming call (instead of the call automatically going to bluetooth, which i want) -- is there something I'm missing?

Just got new Bose bluetooth headphones, which work great -- can pair with iPhone 6+, mac, car -- the pairing is fine, sound is great, function is fine. The problem is exclusively INCOMING calls. Unless I see the call on the phone, I cannot hear it through the headset (therefore rendering the bluetooth for incoming calls useless).
Sequence is:
Incoming call
I have to manually select the bluetooth pair for the headset when the call is accepted
Anyone know of something I'm missing here?
It's not the headset -- it's working and pairing fine, sound is fine, AND i can make a call.
Thanks.

Thank you for using the Apple Support Communities
This sounds like a bug and I would recommend filling out a feedback form letting Apple know what your problem is. https://www.apple.com/feedback/iphone.html

Having problem with siri on calling someone

Hi.. i'm having a problem with siri when calling someone..it says " i can't call using that number "
Im from Mauritius, our mobile number having been migrated into 8-digits since 1 month. I'd turn off siri, reset setting.. its the same!
whats wrong with that?

i"m from Mauritius also having the same problem when calling someone using siri.
i think its because, of the 8 digits number.

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

Contact the email provider for assistance with their service.

I just had problems with a game called call of duty 4, modern warfare. I decided that if I deleted it, I could reinstall it, I could get it back to normal. After I deleted it,I went to to the appstore and went to purchases and accidentaly deleted it/help

I just had problems with a game called call of duty 4, modern warfare. I decided that if I deleted it, I could reinstall it, I could get it back to normal. After I deleted it,I went to to the appstore and went to purchases and accidentaly deleted it. please help me!

You have not deleted it from the purchases list, it is just hidden. To unhide an app, open the Mac App Store app, click the Account link in the Quick Links to the right of the pane and go to the iTunes in the Cloud section where you can manage hidden apps.

My iphone will not ring with an incoming call or an incoming text

My iphone will not ring with an incoming call or an incoming text

Hello tmacmillin,
Thank you for the question. It sounds like there is no sound with an incoming phone call or text. Have you checked to see if Do Not Disturb was accidentally enabled? You will see a "moon" icon in the status bar if it is enabled.
You can disable Do Not Disturb in Settings > Do Not Disturb or in the Control Center as described in the following articles:
iOS: Using Do Not Disturb
http://support.apple.com/kb/HT5463
iOS: Understanding Control Center
http://support.apple.com/kb/HT5858
If you are not hearing any sound from your speakers, I suggest reviewing the following article:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am having problem for my incoming call while accessing in GPRS or WIFI with my iphone 3g so plz help

I am having regular problem with my iphone i am not able to get my incoming call while i am surffing on my iphone 3g, if sum one call me he get the message that the person u r calling is out of coverage area.
And after completing my work on iphone i have to every time reset network in my iphone manually now its every day's problem, so if u have solution plz give me
THANKS.........

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Pending calls, problem with distinguishing which call that was disconnect

Hi everybody,
I have an application that gets triggered by incoming calls. When the calls are rejected a menu will show up. When users have pending calls however the menu should only be triggered when the newly arrived call is disconnected not if the ongoing call was disconnected and the user switched to the new call.
If two calls are active on the phone, is it possible to distinguish which call an event belongs to?
I have not been able to find any information about which tags that comes with EVENT_EVENT_DOWNLOAD_CALL_DISCONNECTED and EVENT_EVENT_DOWNLOAD_MT_CALL. I guess that there is no TAG_ADDRESS in EVENT_EVENT_DOWNLOAD_MT_CALL right? Maybe it is possible to check that both events occurs in the same channel (?) or something?
Thanks in advance,
Henrik

Hi,
Thanks a lot!
I guess that the Transaction Identifier might be solution to my problems. It is the only field present in both MT CALL and CALL DISCONNECTED.
Do you (or someone else) know more about how this field is used? To me it seems from the info in the document like it have one value per telephone call and this is what I am looking for. For MT call it says that it "shall contain one transaction identifier" coming from the network. For call disconnected it says that it "shall contain a list of the transaction identifiers for each of the calls being disconnected". In the document it also says for this field "Coding according to specific technology". Is it always one byte?
When running in the Gemalto simulator the transaction identifier is always 00. On a mobile it doesn't work however, the MT CALL transaction identifier is there 00 and the CALL DISCONNECTED transaction identifier is 80. These value does not change when I test with more calls unfortunately.
Best regards,
Henrik

Problem with messages and calls,, please respond

Problem with my iphone is that the messages are sent and received very late, it hangs while sending, when delete a message it takes time to open messages firstly... messages in the thread disappear and such abnormalities.
and in Calls, i receive notification when the call is missed.
help!

I would do a full restore using iTunes (backup first, of course)

Problem with messages and calls

Problem with my iphone is that the messages are sent and received very late, it hangs while sending, when delete a message it takes time to open messages firstly... messages in the thread disappear and such abnormalities.
and in Calls, i receive notification when the call is missed.
help!

Ritu Parchure wrote:
I have ulmocked and restored the iphone.
I assume you mean "unlocked and restored." My apologies if I msunderstand, but if you unlocked it yourself, then you must have hacked it. If it was originally locked at the time of purchase, only that carrier can unlock it.

Problem with ALV_GRID and CALL TRANSACTION.

Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield   "Information cursor position ALV
    , w_aufnr     LIKE aufk-aufnr.     "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40.     "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_structure_name        = 'aufk'
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_COR3'
     TABLES
          t_outtab         = itab
     EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
FORM user_command_cor3 USING u_ucomm     LIKE sy-ucomm
                             us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      gs_selfield = us_selfield.
      IF gs_selfield-fieldname = 'AUFNR'.
        SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
      ELSE.
        MESSAGE w208(00) WITH 'Select by Order only!'.
      ENDIF.
ENDCASE.
ENDFORM.

Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield   "Information cursor position ALV
    , w_aufnr     LIKE aufk-aufnr.     "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40.     "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_structure_name        = 'aufk'
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_COR3'
     TABLES
          t_outtab         = itab
     EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
FORM user_command_cor3 USING u_ucomm     LIKE sy-ucomm
                             us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      gs_selfield = us_selfield.
      IF gs_selfield-fieldname = 'AUFNR'.
        SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
      ELSE.
        MESSAGE w208(00) WITH 'Select by Order only!'.
      ENDIF.
ENDCASE.
ENDFORM.

XSLT Mapping - problem with prefixes when calling template

Hi all,
I am having a problem with using an XSLT mapping in XI to combine various fields from 2 input messages of different structures into a single output message. I understand that XI puts a wrapper around the 2 input messages so the structure of the XML I am mapping is:
<?xml version="1.0" encoding="UTF-8"?>
<ns2:Messages xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
<ns2:Message1>
<ns:(root of first message)>
</ns:(root of first message)>
</ns2:Message1>
<ns2:Message2>
<ns:(root of second message)>
</ns: (root of second message)>
</ns2:Message2>
</ns2:Messages>
Currently my XSL looks like the following:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge" xmlns:javamap="java:systemDate.CurrentDate" version="2.0">
<xsl:output method="xml" version="1.0" encoding="UTF-8"/>
<xsl:param name="inputparam"/>
<xsl:template match="ns2:Messages">
...<xsl:calltemplate name="FormattingTemplate"/>
</xsl:template>
<xsl:template name="FormattingTemplate">
</xsl:template>
</xsl:stylesheet>
When I test the mapping it works fine until it calls the FormattingTemplate. Then it throws out a "transformer exception" error saying the prefix 'ns2' is not mapped to a namespace.
If anyone could tell me where I am going wrong I would be very grateful.
Thanks,
Mike

Hi Udo,
Thanks for your reply.
When testing the stylesheet locally with XMLSpy, it works fine, but I have just noticed that it adds information in the root tag of the target message as follows:
<(root of target message) xmlns:javamap="java:systemDate.CurrentDate" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
I checked the root tag of the target message in XI and it does not automatically add this information. Thus I added it in my stylesheet so the information above is projected in the target message, but the same error message appears when the call template function is called. Do you know if I need to somehow add a namespace to templates other than the main one? If so, do you know how I go about doing that?
Thanks,
Mike

Problem with JDBC results calling simple stored procedure in VC 7.0

Hi all,
I am building a simple VC model which calls a stored procedure on a JDBC database. I have created the system in the portal, defined the alias and user mapping, the connection test is fine and the VC "find data" lists my bespoke stored procedure.
The stored procedure is :
CREATE PROCEDURE dbo.dt_getBieUsers
AS
select * from dbo.emailuserlink
GO
When I test it using query analyser, it returns 3 records each with the two fields I expect - user and email address.
I drag the model onto the workspace in VC and create an input form ( with just a submit button ). i drag the result port out to create a table. This has no fields in it.
I build and deploy as flex and the app runs, I click the submit button and SUCCESS! I get 3 records in my table each with 2 fields. The data is all correct. The problem with this is the fields are determined at runtime it seems.
I go back to the table and add 2 columns "email" and "address".
i build and deploy and run the app. Again I get 3 records, but this time the contents of all of the rows is not data, but "email" and "address". The data has been replaced by the header texts in all of the rows.
Can anyone help? Why isn't the data being put in my columns as I would expect?
I tried to build and deploy the app as Web Dynpro rather than Flex to see if it was a bug in Flex. The application starts but when I click the submit button to run the JDBC stored procedure I get a 500 Internal Server Error
com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry JDBCFunction
    at com.sap.tc.wd4vc.xglengine.XGLEngine.createComponentInternal(XGLEngine.java:559)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstanceFromUsage(XGLEngine.java:362)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstance(XGLEngine.java:329)
    at com.sap.tc.wd4vc.xglengine.wdp.InternalXGLEngine.getCompInstance(InternalXGLEngine.java:167)
    at com.sap.tc.wd4vc.xglengine.XGLEngineInterface.getCompInstance(XGLEngineInterface.java:165)
The JDBC connection I am using has a connection URL of jdbc:sap:sqlserver://localhost;DatabaseName=BIEUSERS
and a driver class of com.sap.portals.jdbc.sqlserver.SQLServerDriver
Can anyone solve my wierd problems?
Cheers
Richard

Hi Richard,
After you drag and drop the data service, right click on it and choose "Test data service". Then click on "Execute" and after you see the result on the right, click on "Add fields" button (inside the same window). Now you'll see that the fields are on the tabel. This is required only for JDBC data services, since this data (how the resultset is built) is not know in DT and it needs to be run firest - then analysed and only then you have to add the fields to the table).
Regards,
Natty

Problem with E72 incoming calls ID

Similar Messages

Maybe you are looking for