Problem with earphone when plug in Ethernet cable!!!

Hi guys, I bought the macbook pro 15 couple days ago. And I realize that whenever I use my Ethernet cable, my earphone has strange sound, so I unplug the earphone and plug it back, it's ok, but after few minutes (when I play a song) I hear that sound again. It doesn't happen when I use wifi (ethernet cable isn't plug in) and I also check it with another earphones but it's just like the first one . I just wonder if anyone have the same problem? Should I bring it to Apple? Thanks all.

I do not understand. Without third-part programs, the iPod will show up as a camera for get photos and videos off the iPod and it will show in iTunes for file transfer/syncing.
For photos/videos, the iPod shows up in My Computer and you see the photos/videos in the DCIM folder

Similar Messages

  • System froze when I plugged in ethernet cable, was this the cause?

    I had wifi on when using the net, and then I plugged the ethernet adaptor into the thunderbolt port and plugged the ethernet cable into the adaptor, the system froze, the mouse or pad wouldnt work, so I forced shutdown,
    was plugging in ethernet the cause of the system freeze? Should I have turned off wifi prior to plugging in ethernet?
    Or should I not plug in ethernet while the laptop is on?

    System.log  -- I'm using Lion, not Mountain Lion, but for me, one opens the Console application (in the Utilities folder) and look along the left side panel for system.log.
    Also in the Console application you can look at DIagnostic and Usage Messages and also at All Messages. You'll be looking for something that sounds like a problem at the exact time that your freeze occured.
    I've been doing this "hot plugging and unplugging" of the ethernet cables for years with several Mac laptops going through 10.6 and 10.7 (probably have done this a few thousand times) and have never actually experienced any issues while doing it. The area where I have seen some issues is with the laptops sleeping and not waking up properly, once in a while this has happened, but that's not related to what you had happen. Again, I was using 10.6 and am now on Lion (10.7) [employer hasn't upgraded us all to Mountain Lion, although that will happen shortly], so 10.8 might be a little different.

  • New Mac User - Problem connecting to Internet via work Ethernet cable.

    Hi all.
    I am having problems connecting to the Internet through my work ethernet cable.
    When I plug the cable in, Network settings tells me it's there and working, all of the ip numbers conform to what the IT dep say they should be, but safari won't connect to any site.
    I can see the shared folders on the Exchange Server, and access the files no problem, but cannot get any connection to the internet.
    Have called Apple Support and they seem to think the issue is with my work's Network which I am starting to agree with. We went through all of the settings together and they said it all looked ok. Then we tried deleting and re-installing the system configuration folder. Still no joy.
    Airport works fine, (have tried it on three different routers), as long as the Ethernet cable is unplugged.
    If I plug the Ethernet cable directly into a router, it works fine also.
    I connect to my work network by running an ethernet cable from the wall socket to my Macbook. It's the same cable that I connect my PC with, and works fine on my PC.
    Anyone come across anything similar?
    My Macbook is just over a day old and running OS X 10.5.5.
    Thanks

    For some reason (and it's nothing to do with me) it's all working fine now.
    Thanks for your help nonetheless.
    Stu:-)

  • Problems with Epson Stylus 3000 IP Ethernet

    Problems with Epson Stylus 3000 IP Ethernet
    The printer stops processing after reaching 1,72% of printing.
    The Ethernet Cards led is on and blinking green.
    I am running
    Powerbook G4
    OSX 10.4.5
    Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
    I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
    I can se it as well in Safari under the ip adress 10.0.0.6
    I have tried to test the printer in the Common Unix Printing System
    I can see the printer there as well.
    A test print here results in
    "ipp" stopped unexpectedly with status 1
    All my other printers work well and prints test sheets.
    The printer has not worked since Tiger.

    Can you please help me....
    I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
    I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
    When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
    Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
    Here's what I'm doing:
    - I go into Printer Setup Utility
    - I choose Add Printer
    - I choose IP Printer
    - I choose Line Printer Daemon - LPD
    - I pop up the "Print using" and select the "EPSON".
    - Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
    - THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
    Where did you find the:
    Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
    Thank you for you help in advance!
    Micdim
    G4 Dual 1.42 gig   Mac OS X (10.4.5)   1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004...

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Problems with navigation when deploy application on WebLogic 10.3

    Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
    Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
    Best regards!

    I have in log:
    2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
    l setLifecycleContextBuilder
    WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
    nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
    2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
    lize
    INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
    2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
    sourceProvider <init>
    INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
    2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
    trap add
    INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
    2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
    tchCredential
    WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
    mains\base_domain\config\oracle.
    2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
    Exception
    WARNING: Incomplete connection information
    Edited by: Debuger on Mar 26, 2009 11:18 AM

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE.   What should I do?

    I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
    What should I do?

    It's a scam. Have a look at this thread:
    https://discussions.apple.com/thread/6058094?tstart=0

  • Problem with SDO_relate when using polygons with holes.

    I'm having a problem with sdo_relate. I'm trying to extract all elements from a point table (bdtq_batim_p) that are inside a specific polygon from another table (SDA_MUNIC_SS). The spatial index for both table have been rebuilt and the data from both table is valid.
    When I do a count on the query, I know the answer should be 1422 elements (Counted in ArcGIS). However, sdo_relate gives a smaller number of elements in the result set.
    The query :
    SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and sdo_relate( t.SHAPE,s.SHAPE,'mask=anyinteract querytype=window') = 'TRUE'
    returns 282 elements. The query with mask=inside, SDO_Anyinteract() and SDO_inside() all give the same result.
    I did a test with the following query and the result is 1422 (which is the good result).
    SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE';
    It's important to note that the polygone (from SDA_MUNIC_SS) that is used for this query have holes in it. I have the same problem with all the polygons from the SDA_MUNIC_SS table that have holes in it. For the polygon without holes, the results are the same for the 2 queries.
    My question are :
    Why are the result from the two queries different? A query with a buffer of 0 should always return the same result as a query with Anyinteract.
    Is there a known problem with SDO_RELATE when using a polygon with holes in it?
    Do you have any idea how to solve my problem.

    Since i don't have much control on the version of Oracle and Patches that we use in the system, we used a workaround that detects the polygons with holes and uses the SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE' operator in those case. We saw a slight decline in performance but it now returns the right results. When the system will be patched, we'll come back to the original version and see if the problem is solved.

  • I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

    I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

    Hi
    Can You
    Go up to File Menu in iDVD - and here down to
    Save as a DiskImage
    If this works - You can burn Your DVD in another way via Disk Util tool
    Yours Bengt W

  • Strange problem with SQLPLUS when client and server on the same box

    Hi,
    I have the problem with SQLPLUS when clinet and server on the same machine.
    With client and server on the same machine i am running the command
    sqlplus -l username/password@connect_identifier as SYSDBA.
    With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
    Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
    How to get rid of this behaviour. Is there any way to do this.
    I am running this command by creating a process in C#
    Edited by: user11000236 on Jun 16, 2009 10:31 AM

    user11000236 wrote:
    Thanks for the info.
    How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
    This is explainted in the above mentioned link:
    Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

  • CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there

    CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there a way around this?  Is there a patch to correct it?

    To build CD's???
    What problem does Encore have with DL?
    If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

  • I am having problems with Photoshop and plug ins

    I am having problems with Photoshop and plug ins

    what plug-ins? what version of PS? What system? You need to be much, much more specific.
    Mylenium

Maybe you are looking for