Problem with Elements 5 and DNG 5.4 converter.

Never been in this forum, but in a photo site that i do participate they told me i could ask it here...So, can anyone tell me if the new dng converter-5.4, convert dng files that cannot be open in photoshop elements 5? The previous version converted raw from panasonic G1 fine(but turned the files into 40MB ones)...now it converts into 12mb files, but photoshop is not opening them....Thanks a lot for any inputs...

For some camera models, setting the Compatibility popup to an older version of Camera Raw will force it to convert the file to linear mode (a fully demosaiced image), so that an older version of Camera Raw will be able to open the image. If this happens, the resulting DNG file is larger than it would otherwise be, and you lose the ability to take advantage of newly developed demosaic algorithms, which might result in better results in the future.
So don't set the Compatibility popup to a version lower than you need to. Unless you are in the habit of installing older and older versions of Adobe software as time goes on, I don't see any reason to worry about future compatibility.

Similar Messages

Crash problem with elements 10 and mac mini lion 10.7.3

since i download element 10 into mac mini lion10.7.3 my system crashing all the time. i re installed adobe nothing happend. only solition so far shut down the mac and resart it again. and thats give me another 30 min fast work.
i tried CS4 AND CS5 had same problem.
does anyone know an answer?
thank you.

Working with Photoshop can tax a system, and if there are weak links, as Chris Cox alludes to, that can push the computer over the edge. It is not that the program (PSElements in this case) is "causing" the problem, only that it is revealing the weakness, where other programs, say e-mail reader, Web browser, wordprocessor, etc., will not tax the computer enough to point out the problem.
I agree with Chris in that it sounds like you have a hardware issue, such as a bad stick of RAM. That might not get used with regular computing tasks, but then PSE needs more RAM, so suddenly that stick is put into use.
There are several RAM test software programs (some better than others, and often by a great margin), but I do not know what is available for a Mac. Maybe others will have a rec. for you. Also, Chris has commented on some PC RAM test software, and does not like some of those applications, so if he recommends something for the Mac, go with his recs, as he knows what he's talking about.
Good luck, and wish that I had more to offer. I have several articles on tracking down hardware and OS errors, but all are for the PC, and hence, of little use here - sorry.
Hunt

Problems with elements 13 and uploading to Facebook and costco Photo center

I have had this problem for months since I started using the software. Above help on chat tells ne they are not trained on elements 13 so they cannot help - but wasted 4 hours of my time trying to fix this. Adobe has worst support of any company I know of.

Thank you John! You sure know what you are talking about.
After reading your review of the Organizer part of PSE8 I think I will pass on using it and will set up my own system at least for images I take from now on. I am also upset about being enticed to upgrading and having to pay the full amount each time!
As to your suggestion to installing PSE7 first in order to find the catalogue file I hate to find myself getting into more trouble! Do you suggest that I uninstall PSE 8 and then install PSE 7? And then proceed with the other part of your trouble shooting suggestion?
Thanks for your help.

Memory problem with Elements 8 and Windows 7

Hi,
I have a copy of Elements 8 running on Windows 7. When I open the organiser a large amount of RAM (about 1 GB) is grabbed by a SVCHost process. The memory assosiated with the SVCHost builds up over time. When I close the application the memory is not released. It can get realy bad if I run it over night.
I have started going in and killing the process as it can effect the performance of my PC depending on what else I have running at the time.
Anyone got any ideas why this might be happening and how can I stop it. I thought it might be connected with the face recognition feature or the auto analyze cataloging feature but I have turned both of these features off in the preferences control panel.
Any ideas would be welcome, thanks in advance.
Geordie

Thank you John! You sure know what you are talking about.
After reading your review of the Organizer part of PSE8 I think I will pass on using it and will set up my own system at least for images I take from now on. I am also upset about being enticed to upgrading and having to pay the full amount each time!
As to your suggestion to installing PSE7 first in order to find the catalogue file I hate to find myself getting into more trouble! Do you suggest that I uninstall PSE 8 and then install PSE 7? And then proceed with the other part of your trouble shooting suggestion?
Thanks for your help.

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Has anyone had a problem with elements 9? I am in editor and cannot get out. It states I have to com

I am having a problem with Elements 9. It states the editor command is busy and cannot process my next request. If their is anyone out there that can help I would appreciate it. I am presently lockout from performing any other function. Cheryl

This is an Adobe Acrobat forum not a PhotoShop Elements forum. You might want to repost in the appropriate forum.

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Photoshop Premiere 9 vs 13? Are there any problems with CPU usage and crashing?

I stopped using Premiere, because they the computer would freeze and/or the program. I was curious if there was any issue with people currently using Version 13? I think I loaded it on this computer along with Photoshop Elements 9. After a while I just kept Photoshop Elements.
System Specs:
Windows 7 premium home edition
Processor Intel R Core TM i5-2410M CPU @ 2.30 GHz 2.30 GHz
Installed Memory 6.00GB 826 GB free
64 Bit Operating system

stephanies
If 64 bit, while 9 will be a 32 bit application with the limitations of a 32 bit application on 64 bit system, 13 will be a 64 bit application which translates into more computer resources available to 13.
Elements Organizer 9 will not integrate with Elements Organizer 13 although you can convert the 9 catalog in Elements Organizer 13. And there is a marked difference in the workspace between the two versions. Principles tend to stay the same, but features can be moved, changed, or discontinued.
I would have expected Premiere Elements 9/9.0.1 to have worked in your computer environment. Since it did not, I would strongly suggest that you look at the free 30 days tryout of Premiere Elements 13/13.1 in your computer environment to assure the compatibility of it with your computer environment and project goals.
Lots of causes for program crashes (any version).
a. Conflicts with antivirus program.
b. Problem with video card graphics card
c. Use of a pen and table device instead of mouse
d. Problematic source media and format conflicts
e. Not running program as Administrator
f. Poor installation
g. Failure to install QuickTime along with Premiere Elements on the computer
h. Not meeting System Requirements in some way.
i. Other
https://helpx.adobe.com/premiere-elements/kb/system-requirements-premiere-elements.html
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
Thanks

You have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
    for(int k = 0; k < symbols.length; k++){
        String symbol = symbols[k];
        if(s.equals(symbol))
            return k;
    }You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
}

Problem with AI cs5 and windows7

Hi
I had to format my PC few days ago.
I had no problem with intallation: ID and PS work, but i've some problem with AI.
if I work on a new file it's all OK, but if I try to modify and than save a file that I created before format, or if I copy an old element in a new file the program crash.
there is some people that can help me?
many many thanks
martina

Moving this discussion to the Illustrator forum.

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problem with Elements 5 and DNG 5.4 converter.

Similar Messages

Maybe you are looking for