Problem with elgato eye tv and IMac movie languages

I live in switzerland and we have same movie in tv that we can choose the languages Italian or English.
I have the elgato eye tv Hibrid and I have a problem whith the languages. When we have movie that you can choose the languages the  the Mac and the Elgato spooke simultaneously with both languages. One audio in Italian and the other audio in Inglish. How can I choose only one langueage?

Also, note since you are running 10.6, it can't be on a PPC Mac.  10.6 only runs on Intel Macs.

Similar Messages

  • Problem with epson v300 scanner and iMac?

    My epson v300 scanner worked well with my G4, but when I got the iMac it scanned photos with parallel wavy lines in the pictures' dark areas (looks a bit like wood grain, only wavy like an EKG monitor line). Got a new one since the warranty had run out, but it did the same thing. Called epson It yesterday and their solution was to get another machine (scanner), which seems pointless, since it seems it's more likely a problem with this model. I've used Epson products for years and like them, (except for the cost of printer ink), and would probably get another of their scanners, but want to make sure I'm not doing anything wrong myself first. Any advice?

    Hello
    be sure to use the right driver for your system version ?
    download driver page is here
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 113127&prodoid=63077159&infoType=Downloads&platform=All
    try this one
    ICA Scanner Driver v5.3.0 for Image Capture
    Mac OS X (v10.6 - v10.6.x)
    epson13969.dmg - 8.4MB - posted on 08/27/10
    This file contains the ICA Scanner Driver v5.3.0 for Apple's Image Capture utility.  This driver corrects possible issues when using Apple's Image Capture utility with an Epson scanner.  
    Installation instructions:
    Double-clicking this file creates a disk image on your desktop.
    Open the disk image.
    Double-click the installer icon to begin the installation.
    Please view the Scanning With Mac OS X 10.6 and 10.7page for additional information. 
    Attention Mac OS X 10.6 and 10.7 Users:
    Newer drivers may be available directly from Apple. After installing this file, please view our Mac OS X Software Update Instructions page for details.
    Download Now
    HTH
    Pierre

  • Record TV with Elgato Eye TV and Comcast

    Right now we have a Tivo and we want to get rid of it.
    Our TV is down stairs along with the Comcast DTA100/2305/000 Cable Box.
    Our Mac is upstairs along with the cable modem.
    We also have a Apple TV and not sure if comcast basic cable is encrypted?
    What do I need to do to get this to work?
    Any suggestions?
    Brian

    Again, what does this have to do with the ATV?
    The ATV is a media streaming device, not a cable box replacement or DVR.

  • Problems with printing adobe elements and imac

    elements 13 and new imac.  The printer settings are incomplete.  When I try to make adjustments to the printer settings not all the settings are there (i look on line and I am not seeing what I expect

    Are you new to macs generally, or just to this mac? Assuming the former, in OS X you make most of your choices for print quality, ink, paper, etc. in the OS X print window that pops up after you click Print in the PSE print window. The window usually opens as a little stub and you need to click Show Details to expand the window. Your print settings will be in the pulldown menu in the middle of the expanded window.

  • We have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions

    we have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions?

    Back up all data.
    In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

    I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

    Is there a DropBox icon up in the menubar you can click on & see quit DropBox?
    https://www.dropbox.com/help/41

  • Problem with maps in Mavericks on iMac

    I have a problem with my Maps on Mavericks.
    I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
    As you can see, it just stays blank all the time.
    I'm  also running Parallels 9 and don't know if that has something to do with problem.

    Spent days trying various fixes, but this is the one that did it for me. Thanks!
    livetowin
    Re: Problem with maps in Mavericks on iMac 
    Dec 8, 2013 7:14 PM (in response to robin1943)
    Try this
    Since my date and time were incorrect and imessage was not working as well, I tried this
    1. Go to system preferences and click date and time
    2. Select date and time tab
    3. Uncheck "set date and time automatically" and manually enter the correct time
    4. Go to time zone tab and uncheck the box there too
    5. Go back to date and time tab and now check the box "set date and time automatically"
    6. Then check the box in time zone as well
    Now open maps and see if it works!

  • My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

    My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
    I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
    HELP PLEASE
    Very worried!!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • I have a problem with dust on the monitor (iMac 27).

    I have a problem with dust on the monitor (iMac 27). it appeared after half a year of use (in a clean room is not dusty). Replaced by a matrix of times under warranty. But after a while, again, there were shortcomings in the upper corners of the matrix. The guarantee is no longer valid. Am I entitled to free replacement of the matrix or the display?

    Re: I have a 27" iMac that has developed smudges at top left and right of the screen.  Of course it has just gone out of warranty. Anyone had a similar problem or found a solution?
    From the  More Like This  on the right

  • Problems with Apple ProRes 4444 and alpha channels in Motion 4 after upgrade to Snow Leopard.  Has anyone seen this?

    We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4.  A clip with an alpha which keyed perfectly before the upgrade, now will not key.  If I convert the clip to the Animation codec, it keys perfectly.  If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas.  Has anyone seen this or have any suggestions on how to correct this?  Is it a bug? 
    Thanks,

    Motion 4.0.3
    It just doesn't seem to recognize the alpha at all. 

  • Problems with ps elements 10 on imac

    hi,
    i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
    I have the following questions/problems:
    + starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
    + the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
    + I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
    + panorama foto work is mostly running out of memory?! 12gb on board
    Please can anybody help me?
    Thanks
    mikle

    No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
    Von meinem iPad gesendet
    Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
    Re: problems with ps elements 10 on imac
    created by Barbara B. in Photoshop Elements - View the full discussion
    If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problems with FileVault 2 on my iMac mid 2007 with Mac OS LION on it

    Hi guys !
    Get a problem with FileVault 2 on my iMac mid 2007 with MAC OS LION on it. FileVault 2 works, but after rebooting my system, it was unpossible to select an account with the cursor of my trackpad. No chance.
    Before activate Filevault 2 the trackpad works fine. No problems to select an account. Anybody else with the same problem ?
    Regards
    Volker

    Hi EVO67 !
    I checked out your solution, but.... sorry it doesn't works.
    So I cut off the bluetooth connection of the magic trackpad from my iMac and pair it again, but the problem is the same.
    May be it's bigger bug with LION, so I need an update for this function.
    But thank you very much for your help.
    Regards
    Volker

  • I have a problem with my eye tv

    I have a problem with my Eye TV,
    has worked with no problems until yesterday it started giving me an error message:
    "You can't open the application EyeTV because it may be damaged or incomplete."
    Please advise!

    You may want to run Disk Utility and verify your data and permissions.
    The words damaged or incomplete are a hint that Disk Utility could be helpful.

  • Hallo Apple, what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4. Because I have a Problem with my CPU: Kernel_task and corestoraged

    Hallo Apple,
    what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4.
    Because I have a Problem with my CPU: Kernel_task and corestoraged.

    I'm having this same issue. I also have this line in my log, which is curious:
    12/14/14 7:13:07.822 PM netbiosd[16766]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
    Is this related to the problem? What does it mean?
    My 2010 27" iMac running Yosemite won't wake up from sleep.

  • I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

Maybe you are looking for

  • CVP 7.0.2 compatibility with ICM 8.5 or 9.0

    Is there any official documentation on the compatibility of CVP 7.0.2 with newer versions of ICM? I am interested in knowing, if anyone ever successfully connected a CVP 7.0.2 Call server with ICM PG 8.5 or 9.0.

  • How to untagged or remove iPhoto on a previous apple id in the same macbook pro

    hi mac users, i previously used a dummy apple id when i purchased my macbook pro and install iphoto and imovie and garageband. now i want to reinstall this apps using a different apple id that i want to use permanently. but the app store would not al

  • Floating point formats: Java/C/C++, PPC and Intel platforms

    Hi everyone Where can I find out about the various bit formats used for 32 bit floating numbers in Java and C/C++ for both Mac hardware platforms? I'm developing a Java audio application which needs to convert vast quantities of variable width intege

  • ADF graph refresh

    Hi, I am new to ADF and while learning, I am stuck in a problem and couldn't find a solution since long. I am explaining my demo project scenario as below , sorry for making it long ..................... I have two java class, ClassID that returns ID

  • Java SAX mapping "&" problem

    Hi, I'm using SAX mapping, but in case that some field has "&" as content, for example company name,      public void characters(char buf[], int offset, int len)           throws SAXException {           String s = new String(buf, offset, len); for s