Problem with embedded captions in quicktime export

Hi,
I'm trying to add embedded closed captions to a video. I just installed the latest version of Premiere Pro yesterday on my Mac. Should be simple, but alas!
I have this 3 minute video file: https://www.dropbox.com/s/5t9s1kgpa8s3f76/Revver%20Introduction-1080p.mp4
To which I added this .scc caption file: https://www.dropbox.com/s/2ickt0al7v6ggb2/rev3.scc
Things look great in the Premiere preview pane: http://screencast.com/t/HFZLVj6OX
But when I export as a quicktime video with embedded captions, I get a garbage output: https://www.dropbox.com/s/j3bmcx9yk5uuhy0/Revver%20Introduction-1080p-CC.mov
The closed captions display way more rapidly than they do in the Premiere preview pane. I didn't mess with any of the export settings - here's what I selected to get the export: http://screencast.com/t/dgx8a4v5sl7
What's going on? Why is this not working?
Rory

Wow that's awesome. Thanks Kevin.
I downloaded your project, located the source files as being on my machine instead of yours, and tried it out. Unfortunately the export still had some issues, but looking at what you did helped me figure out how to start again from scratch and do it correctly.
I think I understand now - I had been creating a sequence by dragging the video onto the new item. So the sequence used the attributes of the video clip. I hadn't realized I could create a new sequence with different attributes, as described in this article http://helpx.adobe.com/en/premiere-pro/using/creating-changing-sequences.html
So I created a new sequence, made sure it had 29.97 fps and correct dimensions (1440 x 1080), dragged in the video and scc, and exported.
Seems like it worked!
Here's the final verions, with captions embedded. You'll need to download it to see the captions, since dropbox's player doesn't support caption playback:
https://www.dropbox.com/s/j3bmcx9yk5uuhy0/Revver%20Introduction-1080p-CC.mov

Similar Messages

Problem pausing embedded vid in quicktime export

Dear community,
I'm experiencing an issue when exporting a Keynote presentation to a Quicktime movie: slide number 2 contains an embedded video, which automatically starts playing when the viewer gets to slide number 2. However, I can't find any way to let the viewer skip to slide number 3, before the video ends.
I've tried adding hyperlinks, manual control, full screen transparant buttons, build in and out effects that should stop the movie on click, etc. but nothing seems to work. The only option seems to let the viewer go through the entire movie, once finished all buttons and controls start working again.
Has anyone else experienced this and knows a solution / work around?
Thanks and regards,
Tim Metz

sorry, just noticed I omited some information:
The movie has to be be stopped to allow the hyperlink to work:
right click the QT window > select Stop Movie then click on the hyperlink set to slide 2

Export H264 pass-through movie with embedded text track QuickTime Pro 7 Windows?

Using QuickTime Pro 7 for Windows, I add a text track with closed captions to my H264 .mp4 videos.
The text track works great until I try to export it. After I've added the text track, the text track is displayed as long as the track is selected to be active using the Movie Inspector track GUI.
My movies are encoded as H264 for cross-platform compatibility, and need to remain in this format. The only way to save them in QuickTimePro 7 for Windows is to Export Movie to MPEG-4. I select Pass-Through mode to retain the resolution and bandwidth parameters that I initially encoded the video with.
Unfortunately, after I export to MPEG-4, the caption track is lost. It disappears. When I open the newly exported MPEG-4 caption file, and select Movie Inspector, the caption track is missing. Inspector only shows video and audio tracks.
If QuickTime Pro 7 for Windows correctly exported my text track with the video and audio tracks, then users would be able to view the closed captions upon playback in QuickTime Player by selecting View--> Show Closed Captioning (Ctrl+Alt+T).
Anyone been able to export to MPEG-4 pass-through movie with embedded text track QuickTime Pro 7 Windows?
Thank you!

Sorry here is the code
<body>
div id="myAlternativeContent"
a href="videofolder/video.mov"
img src="videofolder/video-poster.jpg"
/a
/div
</body>
videofolder/video
Message was edited by: SFlocation
Message was edited by: SFlocation

Problems with Closed Captioning (subtitles)

The last upgrade of the STB software fixed many of the problems with closed captioning. However, there are still a number of problems. For those of us with hearing impairment, it would really be nice if they got it right. Now, at least all of the closed captioned dialog shows up (which it didn't used to do -- before, it would overwrite itself on certain stations). However, some of the dialog shows up on the screen for only a fraction of a second -- too fast to read it. Please help us hearing impaired people!!!!!

http://forums.verizon.com/vrzn/board/message?board.id=FiOS_TV&thread.id=679
Message Edited by CSimpson on 11-03-2008 01:20 PM

Problems with embedding swfs into Director 11.5

Hello everyone,
I am hoping someone can help me and please bear with me - I don't know a lot about director - I can do some Lingo and get around in the program to make things work.
Right now I am working on an interactive presentation where the user can click a button to view an animation. I am using Director 11.5 for my presentation and have made my animations in After Effects CS3 -- from there I converted my .mov files to .flv files using the Adobe Media Encoder CS4... then I took my .flv file into Flash and published it as a swf file.
The problem that I am having is that when I play the presentation (within Director and after publishing the .app/projector file) the swf files are playing - but there is all this glitchy-artifact stuff all over them. Does anyone know why this would be happening? When I play the swf files in the flash player they look great. Before, when I was using Flash MX and Director MX, I never had any problems with embedding my swf animation files - and they played great - without any artifact. Any and all help would be much appreciated as this project is due in the next few days and I would prefer to figure out a solution rather than uninstalling Flash CS4 and Director 11.5 - and going back to MX.
I toyed with the thought that my video card isn't good enough but I tested the .app file on another machine and the glitchy-artifacts were still there. I have attached a jpg showing the artifact that appears.
I am running Mac OS X 10.5.7
Dual 2 GHz G5 PowerPC
ATI Radeon X800 XT
Thank you!

Sorry... here is the image again and I think the problem might be my machine -- it is very old (~4+ years) and when I tested my .app on a newer intel mac here it worked fine... but maybe I am missing something -- it seems odd that I can see the swf fine in flash player but it is glitchy when played through director or the .app projector file

Problem with m3u files and Quicktime

Hello:
I have made one update with Quicktime software (version 7.6.9 1680.9). The problem is that Quicktime player reproduces mp3 files but when I try to play m3u files the sound is very bad. It sounds like gargling.
For example: This files play ok:
http://www.telefonica.net/web2/sevarra/Sarabande.mp3
It plays ok when the previous link is introduced as URL address in Quicktime player, but the corresponding m3u files sounds like gargling
http://www.telefonica.net/web2/sevarra/list0.m3u
I think there a problem with m3u files and Quicktime.
Tank you very much and best regards.

I have discovered that when the URL is playing (with gargling sound) if I open the A/V controls in QT menus and I move the Jog Shuttle or the Speed level then the sound becomes good.
Yes! Great catch, ttfrank. I can replicate that too.
Interesting ... if (after getting the sound working properly again) you then pause play of the m3u, and start it again, you get the gargling/dalekish sound quality back again.
Bug reporting ... there's a couple of ways you can go about doing this. You can use the QuickTime product feedback form:
http://www.apple.com/feedback/quicktime.html
... but if you want to track progress on the bug, try instead registering as an Apple Developer (for free):
http://developer.apple.com/programs/register/
... and then you'll be able to submit the bug via the Apple Bug Reporter:
http://developer.apple.com/bugreporter/
In the meantime, there's also a restricted forum available to level 4 and 5 members ("Notable New Technical Issues") where we can report this sort of thing. I'll try to get a post written up on the topic there later today.

Problem with embedded objects

Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
                         VALUE NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
                       ) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
                         ISONR          NUMBER(5,0)
                       ) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
                         CCY        ACURRENCY_ORATYPE,
                         LO32BITS   NUMBER(10,0),
                         HI32BITS   NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
                         COUNT    NUMBER(4),
                         LANG     AENUMLANGUAGE_ORATYPE,
                         COST     AAMOUNT_ORATYPE
                       ) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF

Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
                         VALUE NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
                       ) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
                         ISONR          NUMBER(5,0)
                       ) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
                         CCY        ACURRENCY_ORATYPE,
                         LO32BITS   NUMBER(10,0),
                         HI32BITS   NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
                         COUNT    NUMBER(4),
                         LANG     AENUMLANGUAGE_ORATYPE,
                         COST     AAMOUNT_ORATYPE
                       ) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF

Problems with embedding .flv files in DW CS4....

I inserted an .flv file into my DW CS4 html page. I previewed it in my browser, and it worked for a little bit, but now it's not working in any browser, I'm not sure what happened. I included a screen shot in the attachments of what was happening in all the browsers.
Thanks for any help,
Thank you,
Aza

Not sure if that was meant for me
You can tell who was the intended recipient by looking at the header of the message -
6. Sep 10, 2010 6:50 AM in response to: FordGuy48 <<----
Re: Problems with embedding .flv files in DW CS4....
A link to the page would help us diagnose your problem.
Safari tells me that this file -
FLVPlayer_Progressive.swf
is not where you have told the page to expect it. Did you upload it?

PDF export - problem with embedded font

Dear all,
I refer to a problem which was already discussed [here|Export to PDF wrong font;. I was asked to start a new thread and provide further information. Here we are...
The issue is nearly the same:
- We have a solution which both has a WinForms and an .aspx UI.
- We have a report, used in both solutions.
- The WinForms solution uses the Crystal Viewer to preview and print and export and so on.
- The web solution creates a PDF file and prompts to open or save. In this PDF, the font is substituted with Arial. This is actually the concrete problem.
1) Version of CR
on MY machine (MAYBE different on production environment, I have to check this):
Crystal Reports 10 (10.0.0.53327)
Crystal Reports Basic Runtime forVisual Studio 2008 (10.5.0.0)
Crystal Reports runtime engine for .NET Framework 4 (64-bit) (13.0.0.99)
Crystal Reports , version for Visual Studio 2010 (13.0.0.99)
2) CR Service Packs installed
Nope.
3) web / win app?
Both, see description above.
4) Is this happening on dev or deployed system?
On deployed system. It ONLY affects the web solution on the server, which is a Win7 64bit. My developement machine also is a Win7 64bit, it works on this device. On a colleagues machine (WinXP) it works, too.
5) What is the actual font?
The Font was exclusively developed for the customer by a designer, but it is fully embeddable (I already checked this).
6) Link to a screen shot that shows the issue
I do not know whether this really helps to NOT see a font replaced by Arial...
I hope you can help me. If the description is a little confusing, please ask, I will try to explain better, promised. Thank you, have a nice weekend!
Greetings,
Jens

Hi Don,
thank you very much for your reply!
The font is True Type, embedding allows preview/print.
What exactly does "Then make sure the WEB Servers have access to the font." mean? It is installed on the machine. I'm not really familiar with that server config stuff, as it is usually not my job...
Do we have to install the update (it is called support pack 2, right?) on the developement AND the deployment machine? Or only on the developement environment?
Best regards,
Jens

Problem with embedded font on offset printing

Hello,
I generated a leaflet with InDesign CS5. I exported it as PDF/x-3:2002. In the document, I used quote signs (American Typewriter Light font). When I export the PDF, everything goes well, and when I check in Acrobat, the font seems correctly embedded. However, when I picked up the leaflets at the printing house today (it's an offset printing), all the quotation marks were not printed (squares instead). Where does the problem come from?? Did the printing people did a mistake and what mistake? Or is it me?
Thanks for your help!!

Unfortunately, I haven't been able to respond to this thread up until now, but having reviewed this full thread, I have a few comments to offer:
It is irrelevant whether the original text was copied and pasted or whether the font was Type 1, TrueType, a TrueType collection, OpenType CFF, etc. The real issue is whether the PDF/X-3:2002 file exported from InDesign is indeed valid. This can very easily be verified by running the appropriate preflight profile for PDF/X-3:2002 in Acrobat Pro 10 or 11. There is no need for any third party plug-ins or any other software for this.
Assuming that preflight pronounces the file to be 100% kosher with no exceptions and that the file displays properly in Acrobat Pro, you should then try printing the file (or even just the pages that exhibited the problem) from Acrobat Pro to a printer that supports Adobe PostScript 3.
If the printed output from the PostScript printer is correct as well, the problem lies totally with your print service provider and their workflow.
In our extensive experience, problems can occur in any number of ways. One of most frequent sources of problems are printers who routinely open PDF files in Adobe Illustrator to view and “fix” them, somehow thinking that Adobe Illustrator is a general purpose PDF editor. For the record, Adobe Illustrator is not, repeat not, repeat yet again not a general purpose PDF file editor. Adobe Illustrator can only successfully edit PDF files saved from Adobe Illustrator itself when the “save editability” option is specified. Even then, Illustrator requires you to have all fonts referenced by the PDF file actually installed on your system; it does not use any fonts embedded in the PDF file. For other PDF files (such as those produced by Distiller, export from InDesign, etc.), character substitutions (especially for non-ASCII characters such as typographical quotes), font substitutions, color space changes, etc. are common issues.
If the printer is not abusing Illustrator on your InDesign-exported files, it could be any number of third party products that many printers use, some of which are of dubious value and some of which may be either defective in terms of compliance with the PDF specification or simply grossly out-of-date. (It is amazing how many print service providers put their customers' submitted PDF files through all sorts of “fixup” processes, regardless of whether the files need such fixups or not. Many of these “fixups” are more likely to cause problems than they are to fix anything!)
Under no conditions should you need to fully embed fonts in your PDF files. Certainly no Adobe software, including applications, Acrobat, and our PostScript and PDF RIP technologies licensed to OEMs is any way sensitive to whether fonts are subsetted or not! If a third party workflow component is so-sensitive, it is by definitiion defective.
In terms of imposition, there should likewise be no sensitivity to whether fonts are subsetted or not. By the way, the most reliable imposition is actually done at the RIP itself, not by programs that either place PDF files into other documents and regenerate PDF or by utilities that rearrange PDF files or create new PDF files representing the printed flats.
This thread also discussed the issue of whether the OP received a “proof.” Unless you receive a hard copy proof in which the content was put through the exact same workflow as the final product, including RIP and all prepress steps, it is very possible that the defect noted would not show up on the proof. Nonetheless, obtaining a hard copy proof is an excellent idea, especially if the issue comes up about liability for the cost of reprinting the job or even whether the original job should be paid for if the print service provider can't “fix” their workflow problems!
- Dov

Problem with QT PRO image sequence export

I have quicktime pro. When I export a .avi file into a .bmp sequence, it will name the files like this: whatever0001.bmp, whatever0002.bmp, and so on until whatever8000.bmp, depending on how long the video is. The problem with this is, I need to use the image sequence combined with a WAV file in order to get a certain file format (please, don't ask me what it is). However, the encoder needs to files to be: whatever1.bmp, whatever2.bmp, whatever3.bmp, etc.
How can I get quicktime pro to export the image sequence .bmp pictures like that? And if it's not possible, can you please point me to some freeware that can (OS X prefered, but I can use windows ones).
Thanks.

http://www.publicspace.net/ABetterFinderRename/
One of dozens of Mac apps that help rename file names.
Why are you using the .bmp format?
http://www.iceteks.com/articles.php/imageformats/1

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Problems with Embedded classes mapping

Hi,
I'm experiencing problems for table generation with the following case:
a class declares two fields; one of them typed as a subclass of the other; both fields annotated with @Embedded; the subclass uses the annotation @AttributeOverride to avoid column names duplication.
When the tables are generated, one of the field (the most specialized one) is simply omitted by the JPA implementation...
To illustrate my problem, here is an example:
@Entity
public class Bar implements Serializable {
     @Embedded
     protected Foo foo = null;
     @Id
     @GeneratedValue(strategy=GenerationType.SEQUENCE)
     protected long id = -1;
     @Embedded
     protected SubFoo subFoo = null;
     public Bar() {
                super();
        // getters & setters
@Embeddable
public class Foo implements Serializable {
     @Column
     protected String bar = null;
     @Column
     protected String foo = null;
     public Foo() {
          super();
        // getters & setters
@Embeddable
@AttributeOverrides({
     @AttributeOverride(name="bar", column=@Column(name="subbar")),
     @AttributeOverride(name="foo", column=@Column(name="subfoo"))
public class SubFoo extends Foo {
     public SubFoo() {
                super();
}The generated table BAR contains only 3 columns: ID, FOO, BAR...
...and what I expect is two additionnal columns named SUBFOO & SUBBAR!
Can someone tell me: if I definitely need to go back to school (I'm obviously not an EJB expert), or how to make it work as I expect...?
Thanks
-Jerome

I found the note in the EJB specs that clearly states that my issue has no solution at this time:
"Support for collections of embedded objects and for the polymorphism and inheritance of embeddable classes will be required in a future release of this specification."
EJB 3.0 specs - final release - persistence, page 23, note 10 in section 2.1.5

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Whitespace problem with embedded tables

I have a datastructure with embedded groups. In my RTF template, I am using a table for each of these groups, and embedding them likewise. When I load my data, however, and view it, there is a random, undesirable amount of whitespace between where one table ends and where its parent table ends.
To try to make it more clear:
"TEXT in inner table"
----------------------------------------- (End of inner table)
(Random Gap Here)
"Text in outer table"
----------------------------------------- (End of outer table)
The Size of the gap seems to depend on how much space is left on the page. If there is just enough data to fill a page, it will all fit nicely, exactly how I want it. If a page does not contain much data, then the gap gets really big, as if it was trying to cover the entire page.
Anyone else run into this problem?
Thanks,
Matt

Thanks very much!
Before, I had a separate table for each group. When it was all said and done, I had about 5 levels of table embedding. YUCK!
Now I made one big table (1x1) and only used tables where I couldn't get by with plain indenting. The most table embedding that is going on now is individual tables within the large 1x1 table. This method proves much more flexible and elegant.
Thank you very much ashee1,
Matt Soukup

Problem with embedded captions in quicktime export

Similar Messages

Maybe you are looking for